Kit ɗin Gwajin Radata Yana Ƙayyade Madaidaicin Wurin Gwaji da Lokacin Gwaji

Bayanin samfur

Samfurin kayan gwajin radon ne da ake amfani da shi don auna matakan iskar radon a cikin gida. Radon iskar gas ce mara launi da wari wanda zai iya cutar da lafiyar ɗan adam idan an tara shi da yawa. Kayan gwajin ya ƙunshi gwangwani wanda ke buƙatar sanya shi a wurin gwajin da ya dace a cikin gida. Ya ƙunshi yanki na ƙafar murabba'in 2,000 a kowane matakin tushe na gida.

• Ya kamata a fallasa kayan gwajin na tsawon kwanaki 2 zuwa 6 (awa 48 zuwa 144) don auna matakan radon daidai.
• Yana da mahimmanci a lura cewa gwangwani gwajin yana da rayuwar rayuwar shekara ɗaya daga ranar jigilar kaya.

Umarnin Amfani da samfur

1. Ƙayyade wurin gwaji da ya dace da lokacin gwaji:
   • Don gwajin nunawa, nemo gwangwani a cikin mafi ƙasƙancin matakin rayuwa na gida, kamar siminti ginshiki, ɗakin wasa, ko ɗakin iyali. Idan babu ginshiki ko ginshiƙin yana da bene na ƙasa, sanya gwangwani a matakin farko na rayuwa.
   • Sanya gwangwani a kan tebur ko shiryayye aƙalla inci 20 daga ƙasa, aƙalla inci 4 nesa da sauran abubuwa, aƙalla ƙafa 1 nesa da bangon waje, kuma aƙalla inci 36 daga kowace kofa, tagogi, ko wasu buɗaɗɗen zuwa wurin. waje. Idan an dakatar da shi daga rufin, ya kamata ya kasance a cikin yankin numfashi na gaba ɗaya.
2. Yin gwajin:
   • Sa'o'i goma sha biyu kafin gwajin kuma a duk tsawon lokacin gwajin, a rufe dukkan tagogi da kofofin da ke cikin gida, sai dai mashiga da fita ta al'ada ta ƙofofin. Ana iya amfani da tsarin dumama da iska na tsakiya, amma ba na'urorin sanyaya iska ba, fanfo na ɗaki, murhu, ko murhun itace.
   • Cire tef ɗin vinyl daga kewayen gwangwani kuma cire murfin saman. Ajiye tef da murfin saman don amfani daga baya.
   • Sanya gwangwani, buɗe fuska, a wurin da aka zaɓa na gwaji.
   • Yi rikodin kwanan watan farawa da lokacin farawa a gefen baya na takardar da aka bayar. Da'irar AM ko PM don nuna daidai lokacin.
   • Bar gwangwanin gwajin ba tare da damuwa ba yayin duk lokacin gwaji.
   • Bayan lokacin gwajin da ya dace (awa 48-144), sanya murfin saman baya a kan gwangwani kuma rufe kabu tare da tef ɗin vinyl da aka ajiye. Wannan matakin hatimi ya zama dole don ingantaccen gwaji.
   • Yi rikodin kwanan wata tasha da lokacin tsayawa a gefen baya na takardar da aka bayar. Da'irar AM ko PM don nuna daidai lokacin.
   • Cika cikakkun duk sauran bayanan da ake buƙata a gefen baya na takardar da aka bayar. Rashin yin haka zai haramta bincike.
   • Sanya kwandon gwajin tare da bayanan daga cikin ambulan da aka bayar sannan a aika da shi zuwa dakin gwaje-gwaje don bincike cikin kwana daya bayan dakatar da gwajin. Dole ne dakin gwaje-gwaje su karbi gwangwanin gwajin a cikin kwanaki 6 bayan gwajin ya tsaya, ba a wuce karfe 12 na rana, don gwajin ya kasance mai inganci. Ajiye kwafin lambar ID ɗin gwangwanin gwajin ku don tunani na gaba.

Idan kuna da wasu tambayoyi ko buƙatar ƙarin taimako, zaku iya tuntuɓar RAdata a 973-927-7303.

HUKUNCIN GWAJIN RADON

Da fatan za a karanta waɗannan umarnin a hankali KAFIN ci gaba da gwajin radon.

SANAR DA WANDA YA DACE WAJEN JARRABAWA DA LOKACIN JARRABAWA

• Don gudanar da gwajin gwaji, gano gwangwani a cikin mafi ƙasƙanci matakin rayuwa na gida - wato, mafi ƙanƙancin matakin gidan da ake amfani da shi ko za a iya amfani da shi, azaman wurin zama (siminti ginshiki, ɗakin wasa, ɗakin iyali). Idan babu ginshiki, ko ginshiƙin yana da bene na ƙasa, gano gwangwani a matakin farko na rayuwa.
• KADA KA sanya gwangwani a cikin: gidan wanka, kicin, dakin wanki, baranda, sarari, kabad, aljihun tebur, kwali, ko wani wurin da ke kewaye.
• KADA a sanya kayan gwaji a wuraren da hasken rana kai tsaye, zafi mai zafi, zafi mai zafi, ko kusa da famfo ko magudanar ruwa.
• Kada a yi gwajin a cikin yanayi mai tsanani kamar iska mai ƙarfi, guguwa, ko ruwan sama.
• A cikin ɗakin da aka zaɓa, tabbatar da cewa gwangwani ba ta da kyau ga zane-zane, tagogi, da murhu. Ya kamata a sanya gwangwani a kan tebur ko shiryayye a nisa na akalla inci 20 daga ƙasa, aƙalla inci 4 nesa da sauran abubuwa, aƙalla ƙafa 1 daga bangon waje, DA aƙalla inci 36 daga kowace kofa, tagogi. , ko wasu buɗaɗɗen zuwa waje. Idan an dakatar da shi daga rufin, ya kamata ya kasance a cikin yankin numfashi na gaba ɗaya.
• Kayan gwajin zai rufe yanki mai faɗin murabba'in ƙafa 2,000 a kowane matakin tushe na gida.

YA KAMATA A BAYYANA KAYAN GWAJI NA KWANA 2 – 6 (48 – 144 HOURS)

NOTE: MATSALAR BAYANI AWA 48 (kwana 2 a cikin sa'o'i) kuma mafi girman bayyanuwa shine HOURS 144 (kwana 6 cikin sa'o'i).

YIN TEST

1. SHARUDAN GIDAN RUFE: Tsawon awanni goma sha biyu kafin gwajin, kuma duk lokacin gwajin, dole ne a rufe dukkan tagogi da ƙofofin gidan gabaɗaya, sai dai hanyar shiga da fita ta al'ada ta ƙofofin. Ana iya amfani da tsarin dumama da iska na tsakiya, amma ba na'urorin sanyaya iska ba, fanfo na ɗaki, murhu ko murhu na itace.
2. Cire tef ɗin vinyl daga kewayen gwangwani kuma cire murfin saman. *AJEN TEPE DA KARFI*
3. Sanya gwangwani, buɗe fuska, a wurin gwaji da ya dace (duba sama).
4. RUBUTA RANAR FARUWA DA LOKACIN FARA A BANGAREN WANNAN ZAFIN. (Ka tuna da zagaya AM ko PM a lokacin farawa saboda lokacin daidai zai shiga cikin lissafin radon na ƙarshe)
5. Bar gwangwanin gwajin ba tare da damuwa ba yayin lokacin gwaji.
6. Bayan an fallasa gwangwanin gwajin na tsawon lokacin da ya dace (awa 48-144), sanya murfin saman baya a kan gwangwani kuma ku rufe kabu tare da tef ɗin vinyl na asali wanda kuka adana daga Mataki #2. Ana buƙatar ɗaukar gwangwani tare da tef ɗin vinyl na asali don ingantaccen gwaji.
7. RUBUTA RANAR TSAYA DA LOKACIN TSAYA A BANGAREN WANNAN TASKAR. (Ka tuna da zagaya AM ko PM a lokacin tsayawarka saboda lokacin daidai zai shiga cikin lissafin radon na ƙarshe)
8. Cika CIKAKKEN duk wasu bayanan da ke gefen baya na wannan takardar. RASHIN YIN HAKAN YA HARAMTA BINCIKE!
9. Sanya kwandon gwajin tare da wannan fom ɗin bayanan a cikin ambulaf ɗin ku kuma aika da shi cikin RANA DAYA zuwa dakin gwaje-gwaje don bincike. Dole ne mu karɓi gwangwanin gwajin ku a cikin kwanaki 6 bayan dakatar da gwajin ku, ba a wuce 12 na rana, don gwajin ya kasance mai inganci. Ka tuna don adana kwafin lambar ID ɗin gwangwani don tunani na gaba.

LABORATORY BA SHI DA ALHAKIN NA'URAR DA AKA SAMU LAFIYA KO LALATA A CIKIN SAUKI!
Rayuwar shiryayye na kwandon gwajin zai ƙare shekara ɗaya bayan ranar jigilar kaya.

RATA, LLC 973-927-7303

Takardu / Albarkatu

Kit ɗin Gwajin Radata Yana Ƙayyade Madaidaicin Wurin Gwaji da Lokacin Gwaji [pdf] Umarni Kit ɗin Gwajin Ƙayyade Wurin Gwaji Da Ya dace da Lokacin Gwaji, Gwaji, Kit ɗin Ƙayyade Wurin Gwaji da Ya dace da Lokacin Gwaji, Wurin Gwaji da Ya dace da Lokacin Gwaji

Magana

• Manual mai amfani