Pymeter Digital Thermostat Controller Thermostat Manual mai amfani

Tambaya: Ta yaya Pymeter Thermostat Control Temperatuur?
A: Yana sarrafa zafin jiki ta hanyar kunna (KASHE) Heat/Cooler don Fara (Tsayawa) Dumi/Sanyi.

Tambaya: Me yasa ba zai iya sarrafa zafin jiki a wuri guda ba?
A1: Zazzabi yana canzawa koyaushe a cikin yanayin mu mai canzawa;
A 2: Idan kayi ƙoƙarin amfani da mai sarrafa zafin jiki don kiyaye zafin jiki a wuri ɗaya, da zarar yanayin zafin ya canza kaɗan, zai haifar da dumama ko sanyaya na'urar ON & KASHE akai -akai, wanda zai lalata na'urar dumama/sanyaya cikin ɗan gajeren lokaci.

Kammalawa: Ana amfani da duk masu sarrafa zafin jiki don sarrafa kewayon zafin jiki.

Tambaya: Yaya Pymeter Thermostat ke sarrafa kewayon zafin jiki?
A: A Yanayin Dumama (Low ON High OFF)

Tambayi kanka tambaya, me yasa kuke buƙatar zafi? amsar ita ce zafin jiki na yanzu ya yi ƙasa da zafin zafin da ake so, muna buƙatar FARA hita don ƙona zafin. Sa'an nan kuma akwai wata tambaya, a wane lokaci za a fara Dumama? Don haka muna buƙatar saita ƙananan yanayin zafin jiki don haifar da dumama (Kunna kanti don Mai zafi), wanda ake kira "ON-Temperatuur" a cikin samfuran mu, tare da zafin zafin da ke tashi yanzu, menene idan zafi yayi zafi? a wane lokaci za a daina Dumama? Don haka na gaba muna buƙatar saita madaidaicin ma'aunin zafi don Dakatar da Zafi (KASHE kanti don Heater), wanda ake kira "KASHE-Zazzabi" a cikin samfuranmu. Bayan dumama ta tsaya, zafin na yanzu na iya faɗuwa zuwa ƙarancin zafin jiki, sannan zai sake kunna dumama, zuwa wani madauki.

A Yanayin Sanyi (Babban ON Ƙasa KASHE)

Me yasa kuke buƙatar sanyaya? amsar ita ce yawan zafin jiki na yanzu ya fi zafin zafin da ake so, muna buƙatar FARA mai sanyaya don sanyaya zafin jiki, a wane lokaci za a fara Sanyi? Muna buƙatar saita madaidaicin ma'aunin zafin jiki don jawo Cooling (Kunna kanti don Mai sanyaya), wanda ake kira "ON-Temperatuur" a cikin samfuranmu, tare da zafin jiki na yanzu yana faduwa, menene idan yayi sanyi kamar yadda bamu so? Don haka na gaba muna buƙatar saita madaidaicin ma'aunin zafin jiki zuwa Tsaida Sanyi (KASHE kanti don mai sanyaya), wanda ake kira "KASHE-Zazzabi" a cikin samfuranmu. Bayan sanyaya ya tsaya, zafin na yanzu na iya tashi zuwa babban yanayin zafi, sannan zai sake haifar da sanyaya, zuwa wani madauki.
Ta wannan hanyar, Pymeter Thermostat yana sarrafa kewayon zafin jiki a “ON-Temperatuur” ~ “KASHE-Zazzabi”.

2. Umarnin Maɓalli

(1) PV: ƙarƙashin yanayin aiki, firikwensin nuni 1 Zazzabi; a ƙarƙashin yanayin saiti, nuna lambar menu.
(2) SV: a ƙarƙashin yanayin aiki, firikwensin nuni 2 Zazzabi; a ƙarƙashin yanayin saiti, ƙimar saitin nuni.
(3) SET key: danna maɓallin SET na daƙiƙa 3 don shigar da saiti.
(4) Maballin SAV: yayin tsarin saiti, danna maɓallin SAV don adanawa da fita saiti.
(5) Maɓallin ƘARA: a karkashin yanayin saiti, danna maɓallin ƘARA don haɓaka ƙima.
(6) MULKIN RUBUTA: a karkashin yanayin saiti, danna maɓallin DECREASE don rage ƙima.
(7) Mai nuna alama 1: ana kunna fitilun lokacin da aka kunna kanti 1.
(8) Mai nuna alama 2: ana kunna fitilun lokacin da aka kunna kanti 2.
(9) LED1-L: haske yana kunne idan an saita kanti 1 DUMI-DUMINSU.
(10) LED1-R: haske yana kunne idan an saita kanti 1 SANYA.
(11) LED2-L: haske yana kunne idan an saita kanti 2 DUMI-DUMINSU.
(12) LED2-R: haske yana kunne idan an saita kanti 2 SANYA.

3. Yanayin Aiki (Muhimmi !!!)

Kowani kanti yana goyan bayan Yanayin Dumi/Sanyi.

Amfani don na'urar dumama:
1 Saita ON-Zazzabi (1 A I 2On) <KASHE-zafin jiki (1 OF / 2OF).

Fitarwa 1 (2) yana kunna lokacin Zazzabi na yanzu <= ON Temperatuur, kuma a kashe lokacin da Zazzabi na yanzu> = KASHE-Zazzabi, ba zai kunna ba har yanzu
Zazzabi ya koma ON-Zazzabi ko ƙasa!

Yanayin Dumi (Sanyi-> Zafi), Dole ne a saita 1 A/ 2A Ƙasa fiye da 1 OF/ 2OF:
1 A /2On . don juyawa KASHE mafita zuwa TSAYA ZAFI).

Amfani don Na'urar sanyaya:
Saita ON-Zazzabi (1 A I 2On)> KASHE-zafin jiki (1 OF/ 2OF).

Fitowa 1 (2) yana kunna lokacin Zazzabi na yanzu> = A Zazzabi, kuma a kashe lokacin Zazzabi na yanzu <= KASHE-Zazzabi, zai BA kunna har Zazzabi na yanzu ya koma zuwa ON-Da yanayin zafi ko sama!

Yanayin sanyaya (Zafi-> Sanyi), DOLE saita 1 A/ 2On MAI GIRMA fiye da 1 OF/ 2OF: 1 Kunna / 2 Na: matsakaicin zafin jiki (Yaya HOT) ka ba shi damar zama (shine wurin juyawa ON mafita zuwa FARA SANYI); 1OF/ 2OF: mafi ƙarancin zafin jiki (Yaya SANYI) ka ƙyale shi ya kasance (shine wurin juyawa KASHE mafita zuwa TSAYA SANYI).

4. Umarnin Saitawa

Lokacin da mai kunnawa ke aiki ko aiki, danna maɓallin SET sama da daƙiƙa 3 don shigar da yanayin saiti, taga PV yana nuna lambar menu na farko “CF”, yayin da taga SV ke nuna daidai da darajar saiti. Danna maɓallin SET don zuwa menu na gaba, danna maɓallin ƘARA ko maɓallin DECREASE don saita ƙimar sigogi na yanzu. Bayan an gama saiti, danna maɓallin SAV don adana saitunan kuma komawa yanayin yanayin zafin jiki na al'ada. A lokacin saiti, idan babu aiki na daƙiƙa 30, tsarin zai adana saitunan kuma ya koma yanayin nunin zafin jiki na al'ada.

5. Saitin Gudun Jawabi

6. Babban fasali

An ƙera shi tare da kantuna masu zaman kansu guda biyu;
Lays Dual Relays, mai ikon sarrafa duka na'urorin dumama da sanyaya lokaci guda, ko sarrafawa daban;
Sors Sensors masu hana ruwa biyu, kunna na'urori da kashe su a yanayin zafi da ake so, mai sauqi da sassauƙa don amfani;
► Karatun Celsius ko Fahrenheit;
Display Nunin LED Dual, karanta zafin jiki daga firikwensin 2;
Lar Ƙararrawa da Ƙaramar Ƙaramin zafi;
Lar Ƙararrawa ta Bambancin Zazzabi;
De Jinkiri na Ƙarfi, kare na'urorin fitarwa daga juye juye na kashewa/kashewa;
Ib Zazzabi Daidaitawa;
Retain Ana riƙe saituna koda lokacin kashe wuta.

7.Kayyadewa

8. Umarnin MENU

Hankali: Da zarar an canza darajar CF, duk za a sake saita ƙimar Saituna zuwa Tsoffin Darajoji.
Kada ku kwatanta shi da ma'aunin ma'aunin zafi da sanyio na yau da kullun ko gun temp! Da fatan za a daidaita tare da ruwan ruwan kankara (0 ° C/32 ° F) idan ya cancanta!

Bayani: Buzzer zai yi ƙararrawa tare da sauti “bi-bi-bi ii” har sai zafin ya dawo daidai gwargwado ko an danna kowane maɓalli; Ana nuna "EEE" akan taga PV/SV tare da ƙararrawa "bi-bi-bi ii" idan firikwensin kuskure ne.

Ƙararrawa Difference Difference (d7): (Fitample) idan aka saita d7 zuwa 5°C, lokacin da bambancin zafin jiki tsakanin firikwensin 1 da firikwensin 2 ya wuce 5°C, zai yi ƙararrawa da sautin “bi-bibiji”.

Jinkirin Ƙarfafawa (P7): (Fitample) idan an saita P7 zuwa 1 min, kantuna ba za su kunna ba har sai an kirga min 1 tun lokacin da aka kashe wuta.

Yadda za a daidaita zafin jiki?
Jiƙa binciken gabaɗaya a cikin cakuda ruwan kankara, ainihin zafin ya kamata ya zama 0 ° C/32 ° F, idan zafin karatun bai kasance ba, a biya (+-) bambancin Saiti-
C1 /C2, adanawa da fita.