PrecisionPower DSP-88R Processor

BAYANIN KYAUTATA & GARGADI

• DSP-88R siginar siginar dijital ce mai mahimmanci don haɓaka aikin ƙarar sauti na sys-tem ɗin motar ku. Ya ƙunshi mai sarrafa DSP 32-bit da 24-bit AD da masu juyawa. Yana iya haɗawa da kowane tsarin masana'anta, har ma a cikin motocin da ke nuna na'urar sarrafa sauti mai haɗaɗɗiya, tun da, godiya ga aikin de-equalization, DSP-88R zai mayar da siginar linzamin kwamfuta.
• Yana da abubuwan shigar da siginar guda 7: 4 Hi-Level, 1 Aux Stereo, Waya 1 kuma yana ba da abubuwan analog 5 PRE OUT. Kowace tashar fitarwa tana da madaidaicin bandeji 31 ​​akwai. Har ila yau, yana da nau'i-nau'i na 66-mita na lantarki kamar yadda BUTTERWORTH ko LINKWITZ tace tare da gangara 6-24 dB da layin jinkiri na dijital. Mai amfani zai iya zaɓar gyare-gyaren da zai ba shi damar yin hulɗa tare da DSP-88R ta na'urar sarrafa nesa.
  GARGADI: Kwamfuta da aka bayar tare da Windows XP, Windows Vista ko Windows 7 tsarin aiki, 1.5 GHz mini-mum processor, 1 GB RAM mafi ƙarancin ƙwaƙwalwar ajiya da katin zane mai ƙaramin ƙuduri na 1024 x 600 pixels ana buƙatar shigar da software da saita na'urar. .
• Kafin haɗa DSP-88R, karanta wannan littafin a hankali. Haɗin da ba daidai ba zai iya haifar da lalacewa ga DSP-88R ko ga lasifikan da ke cikin tsarin sauti na mota.

ABUBUWA

• DSP-88R – Mai sarrafa siginar Dijital:
• Ikon nesa:
• Wutar Wuta / Sigina:
• Kebul Interface Cable:
• Cable Interface Mai Nisa:
• Hardware mai hawa:
• Saurin Fara Jagora:
• Rijistar Garanti:

GIRMA & HAUWA

HARNAR WAYA PRIMARY & CONNECTIONS

Harshen Waya na Farko

• BABBAN MATAKI / MAGANAR GABATARWA
  Harafin waya na farko ya haɗa da shigar da siginar hi-matakin tashoshi 4 mai launi daidai don haɗa siginar matakin lasifika daga sashin kai. Idan naúrar kai ƙaramar abubuwan RCA ɗin daidai suke ko sama da 2V RMS, zaku iya haɗa shi zuwa manyan abubuwan shigarwa. Yi amfani da ikon shigar da shigar don dacewa daidai da abin da aka shigar da shi zuwa matakin fitar da naúrar kai.
• MAGANIN KARFIN AIKI
  Haɗa ƙarfin 12V+ akai-akai zuwa wayar rawaya 12V+ da ƙasa zuwa baƙar fata GND waya. Tabbatar cewa po-larity kamar yadda aka nuna akan waya. Rashin haɗin kai na iya haifar da lalacewa ga DSP-88R. Bayan amfani da wuta, jira aƙalla daƙiƙa 10 kafin kunnawa.
• CIGABA DA FITAR DA HANNU
  Haɗa da ampkunna naúrar kai ko kunna / ACC 12V ikon zuwa ja REM IN wayoyi. Haɗa shuɗin REM OUT waya zuwa tashar kunna nesa na amplifier da/ko wasu na'urori a cikin tsarin. REM OUT yana fasalta jinkirin daƙiƙa 2 don kawar da hayaniya. Dole ne a kunna DSP-88R kafin kowane ampana kunna masu kashe wuta. Shugaban raka'a ampDole ne a haɗa kunna kunna wuta zuwa REM IN, kuma REM OUT ya kamata a haɗa shi zuwa tashar kunna nesa ta amplifier(s) ko wasu na'urori a cikin tsarin.
• INPUT KYAUTA BLUETOOTH HANNU
  Har ila yau, kayan aikin waya na farko yana da haɗin haɗin kai don ƙirar Bluetooth mara hannu. Haɗa abubuwan au-dio +/- na ƙirar Bluetooth mara hannu zuwa wayoyi masu launin ruwan hoda +/- wayoyi na kayan aikin waya na farko. Haɗa fitowar na'urar kunna sautin na'urar Bluetooth mara sa hannu zuwa MUTUWA mai launi orange - waya na kayan aikin farko. Ana kunna sarrafa na bebe lokacin da mai kunna bebe ya karɓi ƙasa. Hakanan za'a iya amfani da tashar MUTUWA don kunna shigar da AUX. A wannan yanayin, abubuwan shigar da WAYA +/- ba su aiki.
• MUTE IN
  Za a iya soke abubuwan da DSP-88R ke fitarwa lokacin fara injin ta haɗa wayar MUTE IN na launin ruwan kasa zuwa kunna mai kunna wuta. Ana iya amfani da tashar MUTE IN don kunna shigar da AUX IN. A wannan yanayin aikin fitarwa na bebe, saita ta tsohuwa, za a kashe.

Input Riba Control

• Yi amfani da ikon shigar da shigar don dacewa daidai da abin da aka shigar da shi zuwa matakin fitar da naúrar kai. Ana iya daidaita ƙarfin shigar da babban matakin daga 2v-15V.
• AUX/ƙananan matakin shigar da hankali yana daidaitawa daga 200mV-5V.

Shigar da Taimakon RCA
DSP-88R yana fasalta shigar da sitiriyo mai taimako don haɗawa zuwa tushen waje kamar mai kunna mp3 ko wasu hanyoyin sauti. Za a iya zaɓar shigarwar AUX ta hanyar ramut ko kunna wayar MUTE-IN mai launin ruwan kasa.

SPDIF / Input na gani
Haɗa fitarwar gani na sashin kai ko na'urar mai jiwuwa zuwa shigar da sauti na SPDIF/Mai gani. Lokacin da aka yi amfani da shigarwar gani, ana ƙetare abubuwan shigarwar matakin babba.

Haɗin Kula da Nesa
Haɗa na'urar sarrafa ramut zuwa shigar da ramut, ta amfani da kebul na cibiyar sadarwa da aka kawo. Duba sashe na 7 don amfani da ramut.

Haɗin USB
Haɗa DSP-88R zuwa PC kuma sarrafa ayyukanta ta kebul na USB da aka kawo. Haɗin stan-dard yana dacewa da USB 1.1/2.0.

Rahoton da aka ƙayyade na RCA
Haɗa abubuwan RCA na DSP-88R zuwa daidai ampliifiers, kamar yadda aka ƙaddara ta saitunan software na DSP.

SHIGA SOFTWARE

• Ziyarci SOUND STREAM.COM don zazzage sabuwar sigar software ta DSP Composer da direbobin USB zuwa PC ɗin ku. Tabbatar zazzage direbobin USB don tsarin aikin kwamfutocin ku, Windows 7/8 ko XP:
• Bayan zazzagewa, fara shigar da direbobin USB ta hanyar ƙaddamar da SETUP.EXE a cikin babban fayil ɗin USB. Danna IN-STALL don kammala shigar da direbobin USB:
• Bayan nasarar shigar da direbobin USB, buɗe aikace-aikacen saitin Mawaƙin DSP. Zaɓi harshen da kuka fi so:
• Rufe duk wani buɗaɗɗen aikace-aikacen kuma danna Next:
• Review yarjejeniyar lasisi & zaɓi NA YARDA DA YARJEJIN, sannan danna Gaba:
• Zaɓi madadin wuri don ajiye shirin files, ko danna Next don tabbatar da tsoho wurin:
• Zaɓi don shigar da gajeriyar yanke a cikin fara menu ko ƙirƙirar tebur da gumakan QuickLaunch, danna Gaba:
• A ƙarshe, danna INSTALL don fara shigar da software na Mawaƙin DSP. Idan aka sa bayan kammala shigarwa, sake kunna kwamfutarka:

Saukewa: DSP-88R

Nemo gunkin Mawaƙin DSP kuma kaddamar da aikace-aikacen:

• Zaɓi DSP-88R idan an haɗa PC zuwa DSP-88R ta kebul na USB da aka kawo, in ba haka ba zaɓi OFFLINE-MODE.
• A cikin OFFLINE-MODE, zaku iya ƙirƙira da/ko canza sabbin saitattun saitattun masu amfani na al'ada. Babu wani gyara ga DSP da za a ajiye har sai kun sake haɗawa zuwa DSP-88R kuma zazzage saitaccen mai amfani na al'ada.
• Lokacin ƙirƙirar sabon saiti, zaɓi haɗin EQ wanda ya dace da aikace-aikacen ku:
• Zaɓin 1 yana ba da tashoshi 1-6 (AF) 31-band na daidaitawa (20-20kHz). Ana ba tashoshi 7 & 8 (G & H) nau'ikan daidaitawa 11 (20-150Hz). Wannan ƙa'idar ita ce mafi kyau ga nau'ikan nau'ikan hanyoyi biyu ko biampiya tsarin coaxial inda za a yi amfani da crossovers masu aiki.
• Zaɓin 2 yana ba da tashoshi 1-4 (AD) 31-band na daidaitawa (20-20kHz). Tashoshi 5 & 6 (E & F) ana ba da makada 11 na daidaitawa, (65-16kHz). Ana ba tashoshi 7 & 8 (G & H) nau'ikan daidaitawa 11 (20-150Hz). Wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin 3-hanyoyi ne na ci gaba ta amfani da duk masu ƙetare masu aiki.
• Sauran zaɓuɓɓukan sun haɗa da raka'a na auna don daidaita jinkirin lokaci, da KARANTA DAGA NA'AURATA.
• Zaɓi MS don millise seconds ko CM na jinkirin lokaci na centimita.
• Zaɓi KARANTA DAGA NA'AUR don Mawaƙin DSP don karanta saitunan haɗin EQ da aka ɗora zuwa DSP-88R a halin yanzu.
  

1. Tashar Tashar Tashar & Yanayin shigarwa
   Don zaɓuɓɓukan tattara bayanai, a cikin FILE menu, zaɓi CD SOURCE SETUP. Zaɓi waɗanne tashoshi ne masu tsayi ko ƙananan wucewa ta zaɓi TWEETER ko MID RANGE don tashar shigar da ta dace, in ba haka ba ku ci gaba da FULLRANGE. Zaɓi yanayin shigar da siginar da kuke ƙirƙirar wannan saiti don. SPDIF don shigarwar gani, CD don kayan aikin waya na farko yana ɗaukar matakin shigar da matakin lasifika, AUX don shigarwar AUX RCA, ko WAYA don shigarwar ƙirar Bluetooth mara hannu.
2. Saitin Tashoshi
   
   • Zaɓi tashar 1-8 (AH) don gyarawa. Idan kun zaɓi zaɓi na 1 daga menu na haɗin EQ, daidaita daidaiton tashoshi na hagu (1, 3, & 5 / A, C & E) sun dace. Saitunan giciye sun kasance masu zaman kansu. Hakazalika, an daidaita daidaitattun tashoshi masu dacewa (2, 4, & 6 / B, D, & F). Saitunan giciye sun kasance masu zaman kansu. Wannan ƙa'idar ita ce mafi kyau ga nau'ikan nau'ikan hanyoyi biyu ko biampiya tsarin coaxial inda za a yi amfani da crossovers masu aiki. Tashoshi 7 & 8 (G & H) suna daidaita daidaitattun daidaito da saitunan giciye. Idan kun zaɓi zaɓi na 2 daga menu na haɗin EQ, daidaita daidaitattun tashoshi na hagu (1 & 3 / A & C) an daidaita su, azaman tashoshi masu dama (2 & 4 / B & D). Saitunan giciye sun kasance masu zaman kansu. Tashoshi 5 & 6 (E & F) suna da sauye-sauye masu zaman kansu don daidaitawa da saitunan giciye, kamar yadda tashoshi 7 & 8 (G & H) suke don sub woofers. Wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin 3-hanyoyi ne na ci gaba ta amfani da duk masu ƙetare masu aiki.
   • Yi amfani da A>B COPY don kwafi saitunan daidaita tashoshi na hagu, (1, 3, & 5 / A, C, & E) don tashoshin dama, (2, 4, & 6 / B, D, & F) . Za'a iya inganta tashoshi dama gaba bayan A>B COPY ba tare da tasiri ga tashoshi na hagu ba.
3. Kanfigareshan Crossover
   Tsarin ketare yana da zaman kansa ga kowane tashoshi, ba tare da la'akari da tsarin EQ da aka zaɓa ba. Kowace tashoshi na iya amfani da keɓaɓɓen babban fasfo (HP), ƙaddamar da ƙananan wucewa (LP), ko zaɓin band-pass (BP), yana ba da damar tsallake-tsallake masu tsayi da ƙananan wucewa lokaci guda. Sanya kowane madaidaicin silsilar zuwa mitar da ake so, ko kuma da hannu a buga mitar a cikin akwatin sama da kowane darjewa. Ba tare da la'akari da daidaitawar giciye ko haɗin EQ ba, mitar ba ta da iyaka daga 20-20kHz.
4. Kanfigareshan Gefe-Tsare
   Ana iya ba kowane saitin crossover nasa dB kowane saitin octave, daga kadan kamar 6dB zuwa kamar 48dB. Waɗannan ƙetare masu sassauƙa suna ba da damar daidaitaccen saitin mitar yankewa, yana tabbatar da mafi kyawun kariya da aikin masu magana da ku.
5. Samun Tashar Mai Zaman Kanta
   Kowane tashar yana ba da riba -40dB, kuma babban riba ga duk tashoshi lokaci guda na -40dB har zuwa +12dB. An saita riba ta .5dB kari. Sanya kowane madaidaicin tashoshi zuwa matakin ribar da ake so, ko kuma da hannu a buga matakin a cikin akwatin sama da kowane maɗauri. Ana samun ribar tashar ba tare da la'akari da haɗin EQ ba. Kowace tasha kuma tana da maɓalli mai zaman kanta.
6. Jinkirin Tashoshi Mai Zaman Kanta
   Ana iya amfani da takamaiman jinkiri na dijital zuwa kowane tashoshi. Dangane da zaɓinku a menu na haɗin EQ, rukunin ma'aunin shine milliseconds ko santimita. Idan ka zaɓi millimeters, an saita jinkiri a cikin .05ms increments. Idan ka zaɓi santimita, an saita jinkirin a cikin haɓakar 2cm. Sanya kowane madaidaicin tashoshi zuwa matakin jinkirin da ake so, ko da hannu a buga matakin a cikin akwatin sama da kowane maɗaukaka. Hakanan, kowane tashoshi yana da juzu'i na 1800 a ƙasa kowane maɗauri.
7. Graph na amsawa
   Jadawalin amsa yana nuna martani ga kowane tashoshi tare da gyare-gyaren da aka ba shi, gami da crossover da duk makada na daidaitawa, tare da nuni ga 0dB. Za'a iya daidaita mitocin crossover da hannu ta danna wurin shuɗi don ƙananan wucewa, ko matsayi ja don babban wucewa da ja zuwa wurin da ake so. Jadawalin zai nuna kowane tashoshi da aka tsara martani lokacin da aka zaɓi tashar daga saitin tashar.
8. Daidaita Daidaitawa
   Akwai maɗaurin mitar don tashar da aka zaɓa za su bayyana. Idan an zaɓi zaɓi na 1 don haɗin EQ, tashoshi 1-6 (AF) za su sami 31 1/3 octave bands, 20-20kHz. Tashoshi 7 & 8 za su sami bandeji 11, 20-200 Hz. Idan aka zaɓi zaɓi na 2, tashoshi 1-4 (AD) za su sami 31 1/3 octave bands, 20-20kHz. Tashoshi 5 & 6 (E & F) za su sami bandeji 11, 63-16kHz. Tashoshi 7 & 8 (G & H) za su sami makada 11, 20-200Hz.
9. Ajiye, Buɗewa, & Zazzage Saitunan Saiti
   • Yayin amfani da DSP-88R DSP Composer a cikin yanayin layi, zaku iya ƙirƙirar sabon saiti ko buɗewa, view kuma canza saitattun da ke akwai. Idan yin sabon saiti, tabbatar da adana saiti don tunowa da zazzagewa zuwa DSP-88R lokaci na gaba da aka haɗa kwamfutarka. Danna FILE daga mashaya menu, kuma zaɓi SAVE. Zaɓi wuri mai dacewa don adana saitattun saiti.
     
   • Don zazzage saiti zuwa DSP-88R, ko dai bayan yin saiti ko buɗe saitaccen saiti na baya, zaɓi. FILE daga mashaya menu, sannan SAUKARWA ZUWA NA'URARA.
   • Bayan zabar wurin da za a sake ajiye saitin naku, zaɓi wurin da aka saita don samuwa don saukewa zuwa DSP-88R. Danna Ajiye don FLASH. Yanzu saitattun (s) naku sun shirya don tuno da su ta hanyar ramut.
     

SARAUTAR NAN

Haɗa ramut zuwa shigar da ramut na DSP-88R ta hanyar kebul na cibiyar sadarwa da aka kawo. Hana ramut a wuri mai dacewa a cikin babban ɗakin motar don samun sauƙi ta amfani da kayan hawan da aka kawo.

1. Babbar Jagora Volume
   Za'a iya amfani da maɓallin ƙarar mai mahimmanci azaman ikon sarrafa ƙararrawa, matsakaicin shine 40. Saurin danna maɓallin zai kashe duk fitarwa. Latsa maɓallin sake kunnawa don soke bebe.
2. Zaɓin Saiti
   Danna maballin kibiya na sama ko ƙasa don gungurawa ta saitattun saitattun naka. Bayan gano saitattun saitunan da kuke son kunnawa, danna maɓallin Ok.
3. Zaɓin shigarwa
   Danna maɓallan INPUT don kunna bayanai daban-daban daga na'urorin sauti daban-daban na ku.

BAYANI

Tushen wutan lantarki:

• Voltage:11-15 VDC
• Rago Yanzu: 0.4 A
• An kashe ba tare da DRC ba: 2.5 mA
• An kashe tare da DRC: 4mA
• Nesa IN Voltage: 7-15 VDC (1.3mA)
• Fitar da Nisa Voltage: 12VDC (130mA)

Sigina Stage

• Karya - THD @ 1kHz, 1V RMS Fitar da Faɗar Bandwidth -3@dB: 0.005%
• Rabo S/N @ A nauyi: 10-22kHz
• Babban Shigarwa: 95 dBA
• Shigar da Aux: 96 dBA
• Rabuwar tashar @ 1 kHz: 88db ku
• Hankalin shigarwa (Mai magana a ciki): 2-15V RMS
• Hankalin shigarwa (Aux In): 2-15V RMS
• Hankalin shigarwa (waya): 2-15V RMS
• Input Impedance (Mai magana a ciki): 2.2k ku
• Impedance (Aux): 15k ku
• Rashin Shigar (Waya): 2.2k ku
• Matsakaicin Matsayin fitarwa (RMS) @ 0.1% THD: RV 4V

Takardu / Albarkatu

PrecisionPower DSP-88R Processor [pdf] Jagoran Jagora Mai sarrafawa, DSP-88R, Mai sarrafawa, DSP-88R

Magana

• Manual mai amfani