PLIANT TECHNOLOGY MicroCom 900M Professional Wireless Intercom

GABATARWA

Mu a Pliant Technologies muna son gode muku don siyan MicroCom 900M. MicroCom 900M ƙaramin tsari ne, tsarin tsaka-tsakin mara waya na tattalin arziki wanda ke aiki a cikin rukunin mitar 900MHz don samar da kewayo da aiki mai kyau. Tsarin yana fasalta ƙananan bel ɗin bel masu nauyi kuma yana ba da kyakkyawan ingancin sauti, sauƙin amfani, da aikin baturi mai tsayi.

Domin samun fa'ida daga sabon MicroCom 900M, da fatan za a ɗauki ɗan lokaci kaɗan don karanta wannan jagorar gabaɗaya domin ku ƙara fahimtar aikin wannan samfur. Wannan takaddar ta shafi samfuran PMC-900M da PMC-900M-AN*. Don tambayoyin da ba a magance su ba a cikin wannan jagorar, jin daɗin tuntuɓar Sashen Tallafawa Abokin Ciniki na Pliant Technologies ta amfani da bayanin da ke shafi na 9.

SIFFOFIN KIRKI 

• Tsarin tashoshi ɗaya na tattalin arziki
• Sauƙi don aiki
• Har zuwa 5 cikakken masu amfani da duplex
• Masu amfani mara iyaka
• Masu amfani marasa iyaka
• 900MHz mitar band
• Fasahar FHSS da aka ɓoye
• Karami da nauyi
• Gina mai jure ruwa
• Kimanin Rayuwar baturi na awa 8
• Ƙananan jinkiri (kasa da 35 ms)

ME YA HADA DA MICROCOM 900M?

• Holster
• Lanyard
• Kebul na Caji
• Jagoran Fara Mai Sauri
• Katin Rijistar Samfura

KASHI NA'URA 

MULKI

NUNA NUNA

SATA

1. Haɗa na'urar kai zuwa jakar bel. Haɗin lasifikan kai na belpack yana goyan bayan mini minin naúrar kai guda biyu da guda ɗaya. Za'a iya shigar da masu haɗa minin guda biyu a kowace hanya. Za'a iya shigar da ƙananan haši guda ɗaya a kowane tashar jiragen ruwa na haɗin kai.
2. A kunne Latsa ka riƙe maɓallin POWER na daƙiƙa uku (3), har sai allon ya kunna.
3. Zaɓi Ƙungiya. Latsa ka riƙe maɓallin MODE na tsawon daƙiƙa 3, har sai alamar “GRP” tana kiftawa akan LCD. Sannan, yi amfani da maɓallan VOLUME +/- don zaɓar lambar ƙungiya daga 0-51 (ko 0-24 don ƙirar PMC-900M-AN). Short-latsa MODE don adana zaɓinku kuma ci gaba zuwa saitin ID.
   Hoto 1: Allon Gyara Rukuni
   Muhimmi: Beltpacks dole ne su sami lambar ƙungiya ɗaya don sadarwa.
4. Zaɓi ID. Lokacin da "ID" ya fara kiftawa akan LCD, yi amfani da MURYA +/- maɓallan don zaɓar lambar ID ta musamman. Latsa ka riƙe MODE don ajiye zaɓinku kuma fita daga menu.
   Hoto 2: Allon Gyara ID
   
   a. Fakitin ID suna daga 00-04.
   b. Fakiti ɗaya dole ne koyaushe yayi amfani da ID na “00” kuma yayi aiki azaman babban fakitin don aikin tsarin da ya dace. "MR" yana ƙaddamar da babban fakitin akan LCD ɗin sa.
   c. Fakitin saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID “L” akan fakitin bel da yawa idan kafa masu amfani kawai. (Dubi "Zaɓin Yanayin Karɓa" a shafi na 6 don ƙarin bayani game da wannan tsari.)
   d. Abubuwan bel ɗin da aka raba Talk dole ne su yi amfani da ID na "Sh". Kuna iya kwafin ID "Sh" akan bel ɗin bel da yawa idan kun kafa masu amfani da aka raba.
   Koyaya, ba za a iya amfani da ID na “Sh” a lokaci guda da ID ɗin cikakken duplex na ƙarshe (“04”)
   Hoto 3: Allon Gyara ID (Master ID)
   

BATIRI

An shigar da baturin lithium-ion mai caji a cikin na'urar. Toshe kebul na cajin USB cikin tashar USB don cajin baturi. Ledojin cajin da ke saman kusurwar dama na na'urar zai haskaka ja mai ƙarfi yayin da baturin ke caji kuma zai kashe da zarar baturi ya cika. Lokacin cajin baturi kusan awanni 3.5 daga komai. Ana iya amfani da jakar bel yayin caji, amma yin hakan na iya ƙara lokacin cajin baturi.

AIKI

• Magana - Yi amfani da maɓallin TALK don kunna ko kashe magana don na'urar. Wannan maɓallin yana canzawa tare da latsa guda ɗaya, gajeriyar latsa. "TK" yana bayyana akan LCD lokacin da aka kunna.
  • Don cikakkun masu amfani da duplex, yi amfani da guda ɗaya, gajeriyar latsa don kunna magana da kashewa.
  • Don masu amfani da Taɗi na Raba ("Sh"), danna ka riƙe yayin magana don kunna ta don na'urar. (Mai amfani da Taɗi Taɗi ɗaya kaɗai zai iya magana a lokaci ɗaya.)
• Ƙarar Sama da ƙasa - Yi amfani da + da - maɓallan don sarrafa ƙarar. "VOL" da ƙimar lamba daga 00-09 suna bayyana akan LCD lokacin da aka daidaita ƙarar.
• Yanayin LED -
  • Maganar Hannun Hagu/Hagu LED shuɗi ne kuma yana ƙiftawa sau biyu lokacin shiga da kiftawa guda ɗaya lokacin da aka fita.
  • LED Cajin hannun dama ja ne lokacin da baturi yayi ƙasa kuma shima ja yayin caji yana ci gaba. LED yana kashe lokacin da caji ya cika.
    Hoto 5: Gumakan Kashe Sidetone
    

AMFANIN TSORORIN MICROCOM MASU YAWA A WURI DAYA 

Kowane tsarin MicroCom daban ya kamata yayi amfani da rukuni ɗaya don duk belpacks a cikin wannan tsarin. Pliant yana ba da shawarar cewa tsarin da ke aiki kusa da juna su saita Ƙungiyoyin su don zama aƙalla ƙima goma (10). Domin misaliample, idan tsarin ɗaya yana amfani da Rukunin 03, wani tsarin da ke kusa ya kamata ya yi amfani da Rukunin 13.

MATSAYIN MENU

Ana iya daidaita saitunan masu zuwa daga menu na belpack.

Don samun dama ga menu, danna ka riƙe MODE maɓalli na daƙiƙa 3, har sai alamar “GRP” tana ƙyalli akan LCD. Sa'an nan, short-latsa da MODE maballin ƙayyadadden adadin lokuta don samun damar saitin da kuke son canzawa. Da zarar kun gama canje-canjenku, danna ka riƙe MODE don ajiye zaɓinku kuma fita daga menu.

• Kunnawa / Kashe Sidetone - Sidetone yana ba ku damar jin kanku yayin magana. Mahalli masu ƙarfi na iya buƙatar ku ƙara sautin gefen ku.
  • Don daidaita sautin gefe, shiga menu na belpack, sannan danna maɓallin MODE sau biyu. Lokacin da ƙimar “S_” ke kyalli akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar zaɓi daga S0–S5.
  • "S0" yana kashe. Alamar da ke cikin Hoto 4 zata bayyana a saman dama na allon bel ɗin lokacin da Sidetone ya kashe. "S1" shine mafi ƙarancin matakin gefen gefen. "S5" shine mafi girma.
  • Saitin sautin tsoho shine "S3."
• Zaɓin Yanayin Karɓa - Wannan saitin yana ba ku damar saita jakar bel ɗin zuwa cikakken yanayin duplex (duka karba da watsawa) ko saita shi don karɓa kawai (watau saurare kawai, wanda ke hana aikin magana na bel ɗin).
  • Don canza saitin yanayin karɓa, shiga menu na belpack, sannan danna maɓallin MODE sau uku (3). Lokacin da ƙimar "P_" ke kyalli akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar tsakanin "PO" da "PF."
  • "PO" cikakken duplex ne (duka karba da watsawa). Ana iya amfani da wannan yanayin tare da fakitin ID 00-04 kawai.
  • “PF” ana karɓa kawai (watau saurare kawai). Ana iya amfani da wannan yanayin tare da kowane fakitin ID, amma idan kuna so
    saita masu amfani da sauraron kawai-kawai, kuna iya yin haka ta maimaita ID “L” kamar yadda ake buƙata, da saita kowane fakiti zuwa yanayin “PF”. Wannan keɓanta ne ga ƙa'idar cewa duk belpacks dole ne su sami lambar ID ta musamman.
  • Saitin yanayin tsoho shine "PO."
• Sarrafa Matsayin Hannun Marufo - Saita ƙwarewar makirufo dangane da yanayin ku da iyawar lasifikan kai. Wurare masu ƙarfi na iya buƙatar ka rage hankalin mic, yayin da mafi ƙarancin yanayi na iya buƙatar ka ƙara shi.
  • Don daidaita saitin hankali na mic, shiga menu na belpack, sannan danna maɓallin MODE sau huɗu (4). Lokacin da ƙimar “C_” ke kiftawa akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar zaɓi daga C1–C5.
  • "C1" shine mafi ƙarancin matakin hankali. "C5" shine mafi girma.
  • Tsohuwar saitin matakin ji na makirufo shine "C1."
• Fitowar Sauti Mai Girma/Ƙananan – Ana ba da shawarar fitowar sauti mafi girma don mahalli masu ƙarfi. Canza saitin fitarwa a nan yana haifar da karuwa ko raguwar 3 dB.
  • Don canza saitin fitar da sauti, shiga menu na belpack, sannan danna maɓallin MODE sau biyar (5). Lokacin da ƙimar "U_" ke ƙyalli akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar tsakanin "UL" da "UH."
  • “UL” yana da ƙarancin fitowar sauti. "UH" yana da babban fitarwar sauti.
  • Saitin fitarwa na sauti na tsoho shine "UH" (mai girma fitarwa na sauti).

ZABEN MENU 

• An lura da tsoffin saituna tare da Alaji

SHAWARWARIN TSABARIN TA HANYAR KAI 

Tebu mai zuwa yana ba da shawarar saitunan MicroCom don samfuran na'urar kai da yawa gama gari.

Yi amfani da zane na wayoyi don haɗin TRRS na belpack idan kun zaɓi haɗa naku belun kunne. Bias na makirufo voltage kewayon an sauke 1.9V DC da 1.3V DC lodi.

Hoto 4: TRRS Connector

BAYANIN NA'URARA

• Sanarwa game da ƙayyadaddun bayanai: Yayin da Pliant Technologies ke yin kowane ƙoƙari na kiyaye daidaiton bayanan da ke ƙunshe a cikin littattafan samfurin sa, wannan bayanin yana iya canzawa ba tare da sanarwa ba. Ƙayyadaddun ayyuka da aka haɗa a cikin wannan jagorar sune ƙayyadaddun ƙayyadaddun ƙira kuma an haɗa su don jagorancin abokin ciniki da kuma sauƙaƙe shigarwar tsarin. Ayyukan aiki na gaske na iya bambanta. Mai ƙira ya tanadi haƙƙin canza ƙayyadaddun bayanai don nuna sabbin canje-canje a fasaha da haɓakawa a kowane lokaci ba tare da sanarwa ba.
• An amince da PMC-900M-AN don amfani a Ostiraliya da New Zealand kuma yana aiki a cikin kewayon mitar 915-928 MHz.

KULA DA ABUBA DA KIYAYEWA

Tsaftace ta amfani da taushi, damp zane.

HANKALI

Kada a yi amfani da masu tsaftacewa waɗanda ke ɗauke da kaushi. Ka kiyaye ruwa da abubuwa na waje daga buɗe na'urar. Idan samfurin ya fallasa ga ruwan sama, a hankali a shafe duk saman, igiyoyi, da haɗin kebul da wuri-wuri kuma ba da damar naúrar ta bushe kafin adanawa.

TAIMAKON KYAUTATA

Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.
1.844.475.4268 ko +1.334.321.1160
technical.support@plianttechnologies.com

Ziyarci www.plianttechnologies.com don tallafin samfur, takardu, da taɗi kai tsaye don taimako. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.)

KAYAN MAYARWA DOMIN GYARA KO GYARA 

Duk tambayoyi da/ko buƙatun lambar Izinin Komawa yakamata a tura su zuwa sashin Sabis na Abokin Ciniki (customer.service@plianttechnologies.com). Kar a mayar da kowane kayan aiki kai tsaye zuwa masana'anta ba tare da fara samun Lamban Izini na Komawa (RMA).

Samun lambar izini na kayan dawowa zai tabbatar da cewa ana sarrafa kayan aikin ku cikin sauri.

Duk jigilar kayayyakin Pliant yakamata a yi ta UPS, ko mafi kyawun jigilar kaya, wanda aka riga aka biya da inshora. Ya kamata a aika da kayan aiki a cikin kwandon tattarawa na asali; idan hakan bai samu ba, yi amfani da duk wani akwati da ya dace wanda yake da tsauri kuma yana da girman isa don kewaye kayan aiki tare da aƙalla inci huɗu na abu mai ɗaukar girgiza. Dole ne a aika duk kayan jigilar kaya zuwa adireshin da ke gaba kuma dole ne a haɗa da lambar izini na Komawa:

Sashen Sabis na Abokin Ciniki na Pliant Technologies
Attn: Koma Izinin Kayan aiki #
205 Fasaha Parkway
Auburn, AL USA 36830-0500

BAYANIN LASIS

BAYANIN KIYAYEWA FCC MICROCOM™ FCC FASAHA 

00004130 (FCCID: YJH-MC-11)
00004130-B da 00004303 (FCCID: YJH-MCS-900)

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

HANKALI

Canje-canjen da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Bayanin Yarda da FCC: Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

MUHIMMAN NOTE 

Bayanin Bayyanawa na FCC RF Radiation: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC RF wanda aka tsara don yanayi mara sarrafawa.

Dole ne a shigar da eriya da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla mm 5 daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.

Takardu / Albarkatu

PLIANT TECHNOLOGY MicroCom 900M Professional Wireless Intercom [pdf] Jagoran Jagora MicroCom 900M, MicroCom 900M Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru

Magana

• Manual mai amfani