Menene Z-Wave?

Z-Wave ita ce ka'idar mara waya ta duniya don sadarwa a cikin Smart Home. Wannan
na'urar ta dace don amfani a yankin da aka ambata a cikin sashin Quickstart.

Z-Wave yana tabbatar da ingantaccen sadarwa ta hanyar sake tabbatar da kowane saƙo (hanya biyu
sadarwa) kuma kowane kulli da ke da wutar lantarki na iya aiki azaman mai maimaita sauran nodes
(hanyar sadarwa) idan mai karɓa baya cikin kewayon mara waya kai tsaye na
watsawa.

Wannan na'urar da kowace na'urar Z-Wave na iya zama amfani tare da wani
ingantaccen na'urar Z-Wave ba tare da la'akari da iri da asali ba idan dai duka biyun sun dace da
kewayon mitar guda ɗaya.

Idan na'urar tana goyan bayan amintaccen sadarwa zai sadarwa tare da wasu na'urori
amintacce muddin wannan na'urar ta ba da tsaro iri ɗaya ko mafi girma.
In ba haka ba za ta juya ta atomatik zuwa ƙaramin matakin tsaro don kiyayewa
koma baya dacewa.

Don ƙarin bayani game da fasahar Z-Wave, na'urori, farar takarda da sauransu. da fatan za a duba
zuwa www.z-wave.info.

Bayanin Samfura

PAN11 shine maɓallin Plug-in, wanda za'a iya sanya shi tsakanin bangon bango don toshe Typ-F da na'urorin lantarki tare da nauyin juriya har zuwa 3000W, wanda aka haɗa ta hanyar igiya. Bugu da kari, wannan na'ura mai ba da hanya tsakanin hanyoyin sadarwa yana iya gano voltage, ma'aunin wutar lantarki, amd na yanzu yana auna ƙarfin wutar lantarki da wannan kaya ke ɗauka (a cikin Wh) da kuma mitar makamashin da ake cinyewa (a cikin kWh). Hakanan zai gano yuwuwar kitse (3010 ~ 3300W) na na'urar lantarki da aka haɗa. Lokacin gano abin da ya wuce kima, tsarin yana kashewa kuma LED ɗin zai yi haske na 30 seconds.

Shirya don Shigarwa / Sake saiti

Da fatan za a karanta littafin mai amfani kafin shigar da samfurin.

Domin haɗa (ƙara) na'urar Z-Wave zuwa hanyar sadarwa da ita dole ne ya kasance cikin tsohowar masana'anta
jihar Da fatan za a tabbatar da sake saita na'urar zuwa tsohuwar masana'anta. Kuna iya yin hakan ta hanyar
yin aikin keɓancewa kamar yadda aka bayyana a ƙasa a cikin jagorar. Kowane Z-Wave
mai sarrafawa zai iya yin wannan aikin duk da haka ana ba da shawarar yin amfani da na farko
mai sarrafa hanyar sadarwar da ta gabata don tabbatar da cewa an cire na'urar sosai
daga wannan hanyar sadarwa.

Gargaɗi na Tsaro don Na'urori masu ƙarfi

HANKALI: ƙwararrun ƙwararrun ƙwararrun ma'aikata ne kawai ƙarƙashin la'akari da takamaiman ƙasar
jagororin shigarwa/ka'idoji na iya yin aiki tare da wutar lantarki. Kafin majalissar
samfurin, voltage hanyar sadarwa dole ne a kashe kuma a tabbatar da kar a sake kunnawa.

Shigarwa

A cikin akwati na gaba akwai maɓallin Kunnawa/Kashe tare da alamar LED, wanda ake amfani dashi don kunnawa da kashewa ko aiwatar da haɗawa, keɓancewa, sake saiti ko haɗin gwiwa. Lokacin da aka fara kunna wuta, LED ɗin yana walƙiya da kashewa ta wani lokaci a tazarar daƙiƙa 2. Yana nuna cewa ba'a haɗa shi a cikin hanyar sadarwa ta Z-Wave ba kuma ba a sanya mata lamba ID ba.

Haɗuwa ta atomatik

Haɗin kai ta atomatik yana farawa lokacin da ba a haɗa mai kunnawa cikin hanyar sadarwar Z-Wave kuma an toshe shi cikin mashin bango. Lokacin ƙaddamarwa ta atomatik shine mintuna 4 yayin firam ɗin bayanin kumburin za'a fitar dashi sau ɗaya kowane sakan 5. Sabanin haɗawa ta al'ada ba lallai ba ne danna maɓallin Kunnawa/kashe akan maɓalli. Idan haɗa ta atomatik ya wuce lokacin ƙarewa dole ne ka haɗa na'urar da hannu.

Lura: Kada a nemo maɓalli yana fuskantar hasken rana kai tsaye, ɗanɗano ko wurare masu ƙura. Matsakaicin yanayin yanayi mai dacewa don sauyawa shine 0 ° C - 40 ° C. Kada a gano maɓalli kusa da abubuwa masu ƙonewa ko kowane tushen zafi. Bayan an yi amfani da shi, kwandon sauya zai zama ɗan dumi.

Hadawa/keɓancewa

A kan tsohuwar masana'anta na'urar ba ta cikin kowace hanyar sadarwa ta Z-Wave. Na'urar tana buƙata
zama ƙara zuwa cibiyar sadarwa mara waya ta data kasance don sadarwa tare da na'urorin wannan cibiyar sadarwa.
Ana kiran wannan tsari Hada.

Hakanan za'a iya cire na'urori daga hanyar sadarwa. Ana kiran wannan tsari Warewa.
Dukkan hanyoyin biyu suna farawa ta hanyar babban mai kula da hanyar sadarwar Z-Wave. Wannan
an juya mai sarrafawa zuwa yanayin haɗawa daban-daban. Hadawa da Warewa shine
sannan ayi aikin hannu na musamman akan na'urar.

Hada

Tripple Danna maɓallin kan na'urar yana tabbatar da haɗawa da cirewa. Bayan shigar da shi zai kasance cikin yanayin haɗawa ta atomatik na mintuna 4.

Warewa

Tripple Danna maɓallin kan na'urar yana tabbatar da haɗawa da cirewa. Bayan shigar da shi zai kasance cikin yanayin haɗawa ta atomatik na mintuna 4.

Amfanin Samfur

Aiki na Manual

• Toshe na'urar a cikin mashin bango kusa da kaya don sarrafawa.
• Toshe kaya a cikin maɓalli. Tabbatar cewa nauyin da za a sarrafa ba zai iya wuce watt 3000 ba.
• Danna maɓallin ko canza kaya zuwa matsayin ON.
• Don kunna sauyawa da hannu, danna kuma saki maɓallin Kunnawa/kashe. LED ɗin zai kunna, kuma nauyin da aka toshe a cikin na'urar shima zai kunna.
• Don kashe canji da hannu, kawai danna kuma sake sakin maɓallin Kunnawa/Kashe. LED ɗin zai kashe kuma nauyin da aka toshe a cikin na'urar shima zai kashe.

Aiki mai nisa

Ikon Kunnawa/Kashe nesa na sauyawa yana yiwuwa tare da kowane mai sarrafa Z-Wave na masana'anta. Hakanan zaka iya saita ƙungiyoyi don barin na'urarka ta sarrafa ta wasu na'urorin Z-Wave kamar na'urori masu auna firikwensin.

Mai sauyawa yana iya gano wat na yanzutage (5 - 3150W) da kuma yin amfani da wattage (3010 - 3300W) na fitilu ko na'urori masu alaƙa. Lokacin gano yanayin jujjuyawa, za a kashe maɓallan kuma za a kulle maɓallin Kunnawa/kashe kuma LED ɗin zai yi haske da sauri. Duk da haka cire plug ɗin kuma sake haɗa maɓallan don sake saita yanayin ɗimbin yawa zuwa matsayi na yau da kullun.

Tsarin Bayanan Node

Tsarin Bayanan Node (NIF) shine katin kasuwanci na na'urar Z-Wave. Ya ƙunshi
bayanai game da nau'in na'urar da damar fasaha. A hada da
Ana tabbatar da keɓance na'urar ta hanyar aika Firam ɗin Bayanin Node.
Bayan wannan ana iya buƙatar wasu ayyukan cibiyar sadarwa don aika Node
Tsarin Bayani. Don fitar da NIF aiwatar da ayyuka masu zuwa:

Tripple danna maballin akan na'urar yana aika Firam ɗin Bayanin Node.

Saurin matsala harbi

Anan akwai ƴan alamu don shigarwar hanyar sadarwa idan abubuwa ba su yi aiki kamar yadda aka zata ba.

1. Tabbatar cewa na'urar tana cikin yanayin sake saitin masana'anta kafin haɗawa. A cikin shakka cire kafin hada.
2. Idan har yanzu haɗawa ta gaza, duba idan duka na'urorin suna amfani da mitar iri ɗaya.
3. Cire duk matattun na'urori daga ƙungiyoyi. In ba haka ba za ku ga jinkiri mai tsanani.
4. Kada a taɓa amfani da na'urorin baturi mai barci ba tare da mai kula da tsakiya ba.
5. Kar a yi zaben na'urorin FLIRS.
6. Tabbatar cewa kuna da isassun na'urar da ke da wutar lantarki don cin gajiyar saƙar

Ƙungiya – na'ura ɗaya tana sarrafa wata na'ura

Na'urorin Z-Wave suna sarrafa sauran na'urorin Z-Wave. Alakar dake tsakanin na'ura daya
sarrafa wata na'ura ana kiransa ƙungiya. Domin sarrafa wani daban
na'urar, na'urar sarrafawa tana buƙatar kula da jerin na'urorin da za su karɓa
sarrafa umarni. Waɗannan jerin sunayen ana kiran su ƙungiyoyin ƙungiyoyi kuma koyaushe
masu alaƙa da wasu abubuwan da suka faru (misali maɓalli da aka danna, firikwensin firikwensin,…). Idan akwai
taron ya faru duk na'urorin da aka adana a cikin ƙungiyoyin ƙungiyoyi zasu
karbi umarnin mara waya mara waya iri ɗaya, yawanci umurnin 'Basic Set'.

Ƙungiyoyin Ƙungiya:

Lambar Rukuni Matsakaicin NodesDescription

1

1

Lokacin da yawan wutar lantarki ya bambanta sama da 5%, PAN11 zai aika da Rahoton Mita. Lokacin da aka canza yanayin 'kunna' ko 'kashe', zai aika Rahoton Canjin Binary.

Ma'aunin Kanfigareshan

Ya kamata samfuran Z-Wave suyi aiki daga cikin akwatin bayan haɗawa, duk da haka
wasu ƙayyadaddun tsari na iya daidaita aikin mafi kyau ga buƙatun mai amfani ko buše gaba
ingantaccen fasali.

MUHIMMI: Masu sarrafawa na iya ba da izinin daidaitawa kawai
dabi'u da aka sanya hannu. Domin saita ƙima a cikin kewayon 128 … 255 ƙimar da aka aiko a ciki
aikace-aikacen zai zama ƙimar da ake so ya rage 256. Ga misaliample: za a
siga zuwa 200  ana iya buƙata don saita ƙimar 200 a debe 256 = debe 56.
Idan darajar byte biyu daidai wannan dabarar ta shafi: Ƙimar da ta fi 32768 maiyuwa.
da ake buƙata a ba shi azaman munanan dabi'u kuma.

Siffa 1: Lokacin Rahoton Mita na Watt

Idan an saita saitin na awa 1 (ƙimar saita = 720), PAN11 zai ba da rahoton amfani da wutar lantarki nan take kowane awa 1 zuwa Z-Wave Controller. Raka'a: 5 seconds
Girman: 2 Byte, Default Value: 02d0

SettingDescription

Sashi na 2: Lokacin Rahoton Mita na KWH

Idan an saita saitin na awa 1 (saitin ƙima = 6), PAN11 zai ba da rahoto game da Amfanin Wutar Lantarki (KW/h) kowace sa'a zuwa Mai Sarrafa Z-Wave. Raka'a: 10 min
Girman: 2 Byte, Default Value: 0006

SettingDescription

Siga 3: Ƙofar Watt don ɗaukar nauyi

Wannan gargadi ne lokacin da wattage na kaya akan ƙimar ƙofa da aka saita, idan nauyin wattage ya wuce ƙimar saiti PAN11 zai aika umarnin ƙararrawa ga mai sarrafawa.
Girman: 2 Byte, Default Value: 0bb8

SettingDescription

Siga na 4: Ƙofar KWh don ɗaukar nauyi

Wannan gargadi ne lokacin da KWh na kaya akan ƙimar da aka saita saitattun, idan Ƙarfin Wuta ya wuce ƙimar saiti PAN11 zai aika umarnin ƙararrawa ga mai sarrafawa.
Girman: 2 Byte, Default Value: 2710

SettingDescription

Bayanan Fasaha

Girma	0.0580000×0.0950000×0.0750000mm
Nauyi	120 gr
Platform Hardware	ZM3102
EAN	4713698570804
Voltage	230V
Loda	3500 W
Nau'in Na'ura	Kunnawa/Kashe Wuta
Kayan Kayan Kayan Kayan Gida	Sauya Binary
Specific Class Class	Sauya Ikon Binary
Shafin Firmware	01.01
Z-Wave Shafin	03.29
Takaddun shaida ID	Saukewa: ZC08-13020005
Z-Wave Samfurin Id	013c.0001.0001
Yawanci	Turai - 868,4 Mhz
Matsakaicin ikon watsawa	5mW ku

Darussan Umurni masu goyan baya

• Na asali
• Canja Binary
• Sigar
• Sauya Duk
• Specific Mai ƙira
• Kanfigareshan
• Mita
• Ƙungiya

Bayanin takamaiman sharuddan Z-Wave

• Mai sarrafawa - na'urar Z-Wave ce mai iya sarrafa hanyar sadarwa.
  Masu sarrafawa galibi ƙofofin ƙofofi ne, Ikon nesa ko masu kula da bangon baturi.
• Bawa - na'urar Z-Wave ce ba tare da ikon sarrafa hanyar sadarwa ba.
  Bayi na iya zama na'urori masu auna firikwensin, masu kunnawa har ma da masu sarrafa nesa.
• Mai Kula da Farko - shine babban mai tsara hanyar sadarwa. Dole ne ya kasance
  mai sarrafawa. Za a iya samun mai sarrafawa na farko ɗaya kawai a cikin hanyar sadarwar Z-Wave.
• Hada - shine tsarin ƙara sabbin na'urorin Z-Wave cikin hanyar sadarwa.
• Warewa - shine tsarin cire na'urorin Z-Wave daga hanyar sadarwa.
• Ƙungiya - dangantaka ce mai sarrafawa tsakanin na'ura mai sarrafawa da
  na'urar sarrafawa.
• Sanarwar Wakeup - saƙo ne na musamman mara waya ta Z-Wave
  na'urar don sanar da wanda ke iya sadarwa.
• Tsarin Bayanan Node - saƙon mara waya ne na musamman wanda a
  Na'urar Z-Wave don sanar da iyawa da ayyukanta.