novation LAUNCHKEY MK4 USB MIDI Keyboard Controller
Ƙayyadaddun bayanai
- Sunan samfur: Kaddamar da MK4
- Siga: 3.0
- Sadarwa: MIDI akan USB da DIN
- MIDI Interfaces: Biyu nau'i-nau'i na shigarwar MIDI da fitarwa akan USB, tashar fitarwa ta MIDI DIN
Umarnin Amfani
About the Launchkey Programmer’s Reference Guide
- This document provides all the information you need to be able to control the Launchkey.
- The Launchkey communicates using MIDI over USB and DIN. This document describes the MIDI implementation for the device, the MIDI events coming from it, and how the Launchkey’s various features can be accessed through MIDI messages.
We express MIDI data in this guide in a few ways:
- Cikakken bayanin saƙon turanci.
- Lokacin da muka kwatanta bayanin kula na kiɗa, ana ɗaukar tsakiyar C a matsayin 'C3' ko bayanin kula 60. Tashar MIDI 1 ita ce tashar MIDI mafi ƙasƙanci-lambobi: tashoshi daga 1 zuwa 16.
- Hakanan ana bayyana saƙon MIDI a cikin bayyananniyar bayanai, tare da daidaitattun ƙima da hexadecimal. Lambobin hexadecimal koyaushe za a bi su ta hanyar 'h' da kuma daidai gwargwado da aka bayar a cikin brackets. Don misaliample, bayanin kula akan saƙo akan tashar 1 ana nuna shi da matsayi byte 90h (144).
Entering Launchkey’s Bootloader
- Launchkey yana da yanayin bootloader wanda ke ba mai amfani damar yin hakan view nau'ikan FW na yanzu, kuma kunna / kashe Easy Start. Ana samun dama ga bootloader ta hanyar riƙe maɓallin Octave Up da Octave Down tare yayin ƙarfafa na'urar.
- Allon zai nuna lambobin sigar Application na yanzu da Bootloader.
- Ana iya amfani da maɓallin rikodin don kunna Sauƙaƙe Fara. Lokacin da Sauƙin Farawa ke kunne, Ƙaddamarwa yana nunawa azaman Na'urar Ma'ajiya ta Jama'a don samar da mafi dacewa ƙwarewa na farko. Kuna iya kashe wannan da zarar kun saba da na'urar don kashe wannan Na'urar Ma'ajiyar Jama'a.
- Ana iya amfani da maɓallin Play don fara aikace-aikacen.
MIDI on Launchkey
- Makullin ƙaddamarwa yana da mu'amalar MIDI guda biyu, yana samar da nau'i-nau'i biyu na abubuwan shigar MIDI da fitarwa akan USB. Gasu kamar haka:
- MIDI In/Out (or first interface on Windows): This interface is used to receive MIDI from performing (keys, wheels, pad, pot, and fader Custom Modes); and is used to provide external MIDI input.
- DAW In/Out (or second interface on Windows): This interface is used by DAWs and similar software to interact with the Launchkey.
- Har ila yau Launchkey yana da tashar fitarwa ta MIDI DIN, wanda ke watsa bayanai iri ɗaya kamar yadda ake karɓa a tashar tashar MIDI In (USB). Lura cewa wannan ya keɓance martani ga buƙatun da mai watsa shiri ya bayar ga maɓallin ƙaddamarwa akan MIDI Out (USB).
- Idan kuna son amfani da Launchkey azaman filin sarrafawa don DAW (Digital Audio Workstation), wataƙila kuna son amfani da ƙirar DAW (Duba Yanayin DAW [11]).
- In ba haka ba, zaku iya yin hulɗa tare da na'urar ta amfani da ƙirar MIDI.
- Maɓallin ƙaddamarwa yana aika bayanin kula Akan (90h (144) - 9Fh (159)) tare da sifili mai sauri don Kashe bayanin kula. Yana karɓar ko dai Kashe Bayanan kula (80h (128) - 8Fh (143)) ko Note Ons (90h (144) - 9Fh (159)) tare da sifilin sifili don Kashe bayanin kula.
Tsarin saƙon SysEx da na'urar ke amfani da shi
- Duk saƙonnin SysEx suna farawa da taken mai zuwa, ba tare da la'akari da alkibla ba (Mai watsa shiri → Maɓalli ko Launchkey → Mai watsa shiri):
SKUs na yau da kullun:
Mini SKUs:
- Bayan taken umarni byte ne, zaɓi aikin da za a yi amfani da shi, sannan duk bayanan da ake buƙata don wannan aikin.
Launchkey Programmer’s Standalone (MIDI) mode
- Maɓallin ƙaddamarwa yana yin ƙarfi zuwa yanayin A tsaye. Wannan yanayin baya samar da takamaiman ayyuka don hulɗa tare da DAWs, yanayin DAW in/out (USB) ya kasance mara amfani don wannan dalili. Koyaya, don samar da hanyoyin ɗaukar abubuwan da suka faru akan maɓallan sarrafa DAW na Launchkey, suna aika abubuwan Canjin Gudanar da MIDI akan Channel 16 (Matsayin MIDI: BFh, 191) akan mahaɗin MIDI a / waje (USB) da tashar tashar MIDI DIN:
Hoto 1. Decimal:
Hoto 2. Hexadecimal:
- Maɓallin Fara da Tsaida (Farawa da Shift + Fara akan Launchkey Mini SKUs) suna fitar da MIDI Real Time Start kuma Tsaida saƙonni bi da bi.
- Lokacin ƙirƙirar Yanayin Al'ada don maɓallin ƙaddamarwa, kiyaye waɗannan a hankali idan kuna saita abubuwan sarrafawa don aiki akan tashar MIDI 16.
Launchkey Programmer’s DAW mode
- Yanayin DAW yana ba da DAWs da ayyukan software kamar DAW don fahimtar mu'amalar mai amfani da hankali akan saman Launchkey. Ƙarfin da aka kwatanta a wannan babin yana samuwa ne kawai da zarar yanayin DAW ya kunna.
- Ana iya samun duk ayyukan da aka kwatanta a wannan babi ta hanyar DAW In/Out (USB).
Ikon yanayin DAW
- Kunna Yanayin DAW:
- Kashe Yanayin DAW:
- Lokacin da software mai kama da DAW ta gane Launchkey kuma ta haɗa zuwa gare ta, ya kamata ta fara shigar da yanayin DAW (aika 9Fh 0Ch 7Fh), sannan, idan ya cancanta, kunna fasalin fasalin (duba sashin "Launchkey MK4 feature controls") wannan doka).
- Lokacin da software mai kama da DAW ta fita, yakamata ta fita daga yanayin DAW akan Launchkey (aika 9Fh 0Ch 00h) don mayar da ita zuwa yanayin Standalone (MIDI).
Fuskar cikin yanayin DAW
A cikin yanayin DAW, akasin yanayin keɓantacce (MIDI), duk maɓalli, da abubuwan da ba su da alaƙa da fasalulluka na aiki (kamar Yanayin Al'ada) ana iya isa ga kuma za su ba da rahoto akan keɓancewar DAW In/Out (USB) kawai. Maɓallan ban da waɗanda ke cikin Faders an tsara su don Sarrafa abubuwan da ke faruwa kamar haka:
- Hoto 3. Decimal:
- Hoto 4. Hexadecimal:
- Hakanan ana amfani da fihirisar Canjin Canjin da aka jera don aika launi zuwa LEDs masu dacewa (idan maɓallin yana da wani), duba Launi na saman [14].
Akwai ƙarin hanyoyi a yanayin DAW
- Da zarar a cikin yanayin DAW, waɗannan ƙarin hanyoyin suna samuwa:
- Yanayin DAW akan pads.
- Plugin, Mixers, Aika & Sufuri akan maɓallan.
- Ƙarar kan fader (Launchkey 49/61 kawai).
- Lokacin shigar da yanayin DAW, ana saita saman ta hanya mai zuwa:
- Pads: DAW.
- Encoders: Plugin.
- Faders: Volume (Launchkey 49/61 only).
- DAW ya kamata ya fara kowane ɗayan waɗannan wuraren daidai.
Rahoton yanayin kuma zaɓi
- Abubuwan da ke faruwa na MIDI za su iya sarrafa hanyoyin pads, encoders, da fader kuma Launchkey ana ba da rahoto a baya duk lokacin da ya canza yanayin saboda ayyukan mai amfani. Waɗannan saƙonni suna da mahimmanci don ɗauka, kamar yadda DAW ya kamata ya bi su yayin saitawa da amfani da saman kamar yadda aka yi niyya bisa yanayin da aka zaɓa.
Yanayin pad
- Ana ba da rahoton canje-canjen yanayin kundi ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashoshi 7 (Matsayin MIDI: B6h, 182), Canjin Canjin 1Dh (29)
- An tsara hanyoyin Pad zuwa dabi'u masu zuwa:
- 01h (1): Tsarin ganga
- 0Fh (15): DAW Drum layout
- 02h (2): Tsarin DAW
- 04h (4): User Chord
- 05h (5): Yanayin al'ada 1
- 06h (6): Yanayin al'ada 2
- 07h (7): Yanayin al'ada 3
- 08h (8): Yanayin al'ada 4
- 0Dh (13): Tsarin Arp
- 0Eh (14): Map
Hanyoyin encoder
- Ana ba da rahoton canje-canjen yanayin encoder ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashar 7 (Matsalar MIDI: B6h, 182), Canjin Canjin 1Eh (30)
- An tsara hanyoyin canza rikodin zuwa dabi'u masu zuwa:
- 01h (1): Mixer
- 02h (2): Plugin
- 04h (4): Aika
- 05h (5): sufuri
- 06h (6): Yanayin al'ada 1
- 07h (7): Yanayin al'ada 2
- 08h (8): Yanayin al'ada 3
- 09h (9): Yanayin al'ada 4
Yanayin Fader (Launchkey 49/61 kawai)
- Ana ba da rahoton canje-canjen yanayin Fader ko ana iya canza su ta hanyar taron MIDI mai zuwa:
- Tashoshi 7 (Matsayin MIDI: B6h, 182), Canjin Canjin 1Fh (31)
- An tsara hanyoyin fader zuwa dabi'u masu zuwa:
- 01h (1): girma
- 06h (6): Yanayin al'ada 1
- 07h (7): Yanayin al'ada 2
- 08h (8): Yanayin al'ada 3
- 09h (9): Yanayin al'ada 4
Yanayin DAW
- An zaɓi yanayin DAW akan pads akan shigar da yanayin DAW, kuma lokacin da mai amfani ya zaɓa ta menu na Shift. Pads ɗin suna ba da rahoto a matsayin bayanin kula (Matsayin MIDI: 90h, 144) da kuma bayanta (Matsayin MIDI: A0h, 160) abubuwan da suka faru (na ƙarshen kawai idan an zaɓi Polyphonic Aftertouch) akan Channel 1, kuma ana iya samun dama don canza LEDs ɗin su ta waɗannan abubuwan. fihirisa:
Drum mode(s)
- The DAW Drum mode on pads can replace the Drum mode of standalone (MIDI) mode, providing a capability to the DAW to control its colours and receive the messages on the DAW MIDI port. This is done by sending the below message:
- Ana iya mayar da yanayin ganga zuwa aiki kadai tare da saƙon da ke ƙasa:
- The pads report back as note (MIDI status: 99h, 153) and Aftertouch (MIDI status: A9h, 169) events (the latter only if Polyphonic Aftertouch is selected) on Channel 10, and can be accessed for colouring their LEDs (see “Colouring the Surface [14]”) by the following indices:
Hanyoyin encoder
Cikakken Yanayin
- Encoders a cikin hanyoyi masu zuwa suna ba da saiti iri ɗaya na Canje-canje na Sarrafa akan Channel 16 (Matsayin MIDI: BFh, 191):
- Plugin
- Mixer
- Aika
- Alamar Canjin Sarrafa da aka bayar sune kamar haka:
- Idan DAW ya aika musu da bayanin matsayi, suna ɗauka ta atomatik.
Yanayin dangi
- Yanayin Sufuri yana amfani da yanayin fitarwa na dangi tare da Canje-canje na Sarrafa akan Tashoshi 16 (Matsayin MIDI: BFh, 191):
- A cikin Yanayin Dangi, ƙimar pivot shine 40h (64) (babu motsi). Ƙimar da ke sama da pivot batu suna ɓoye motsin agogon hannu. Ƙimar da ke ƙasa da maƙallan pivot suna ɓoye motsin gaba da agogo. Domin misaliample, 41h(65) yayi daidai da mataki 1 a agogon agogo baya kuma 3Fh(63) yayi daidai da mataki 1 gaba da agogo.
- Idan an kunna abubuwan taɓawa na ci gaba, ana aika Touch On azaman taron Canjin Sarrafa tare da ƙimar 127 akan Channel 15, yayin da aka aiko da taɓawa azaman taron Canjin Sarrafa tare da ƙimar 0 akan Channel 15. Domin ex.ampLe, tukunyar hagu mafi tsayi zai aika BEh 55h 7Fh don taɓawa, da BEh 55h 00h don Taɓa Kashe.
Yanayin Fader (Launchkey 49/61 kawai)
- Faders, a cikin Yanayin Ƙara, suna ba da saitin Canje-canje masu zuwa akan Channel 16 (Matsayin MIDI: BFh, 191):
- Idan an kunna abubuwan taɓawa na ci gaba, ana aika Touch On azaman taron Canjin Sarrafa tare da ƙimar 127 akan Channel 15, yayin da aka aiko da taɓawa azaman taron Canjin Sarrafa tare da ƙimar 0 akan Channel 15. Domin ex.ampLe, Fader na hagu zai aika BEh 05h 7Fh don taɓawa, da BEh 05h 00h don taɓawa.
Yin canza launi
- Don duk sarrafawa banda yanayin Drum, bayanin kula, ko canjin sarrafawa wanda ya dace da waɗanda aka bayyana a cikin rahotanni ana iya aika su zuwa launi daidai LED (idan iko yana da wani) akan tashoshi masu zuwa:
- Tashoshi 1: Saita launi na tsaye.
- Tashoshi 2: Saita launi mai walƙiya.
- Tashoshi 3: Saita launi mai tauri.
- Don yanayin Drum akan Pads, Da zarar DAW ya karɓi ikon yanayin [12], tashoshi masu zuwa suna aiki:
- Tashoshi 10: Saita launi na tsaye.
- Tashoshi 11: Saita launi mai walƙiya.
- Tashoshi 12: Saita launi mai tauri.
- An zaɓi launi daga palette mai launi ta hanyar bayanin kula Gudun taron ko ƙimar canjin sarrafawa.
- Monochrome LEDs na iya samun saitin haskensu ta amfani da CC akan tashar 4, lambar CC ita ce fihirisar LED, ƙimar ita ce haske.
- misali
Launi mai launi
- Lokacin samar da launuka ta bayanin kula na MIDI ko canje-canjen sarrafawa, ana zaɓar launuka bisa ga tebur mai zuwa, ƙima:
- Tebu iri ɗaya tare da alamar hexadecimal:
Launi mai walƙiya
- When sending flashing colour, the colour flashes between that set as static or pulsing colour (A), and that contained in the MIDI event setting flashing (B), at 50% duty cycle, synchronised to the MIDI beat clock (or 120bpm or the last clock if no clock is provided). One period is one beat long.
Pulsing launi
- Launi yana motsawa tsakanin duhu da cikakken ƙarfi, yana aiki tare da agogon bugun MIDI (ko 120bpm ko agogon ƙarshe idan ba a samar da agogo ba). Lokaci ɗaya yana da tsayin bugun biyu, ta amfani da sigar igiyar ruwa mai zuwa:
RGB launi
- Hakanan ana iya saita maɓalli da maɓallan fader zuwa launi na al'ada ta amfani da SysEx mai zuwa
SKUs na yau da kullun:
Mini SKUs:
Sarrafa allon
Ra'ayoyi
- Nuni na tsaye: Nuni tsoho wanda ake nunawa sai dai idan kowane lamari yana buƙatar nuni daban don a nuna shi na ɗan lokaci.
- Nuni na wucin gadi: Nuni da wani lamari ya jawo, yana dagewa na tsawon saitin mai amfani da ya ƙare.
- Sunan sigar: Ana amfani da shi tare da haɗin gwiwa, yana nuna abin da yake sarrafawa. Sai dai idan an samar da saƙon (SysEx), yawanci wannan shine mahallin MIDI (kamar bayanin kula ko CC).
- Ƙimar siga: Ana amfani da shi tare da haɗin gwiwa, yana nuna ƙimar sa na yanzu. Sai dai in an bayar da shi ta hanyar saƙonni (SysEx), wannan shine ɗanyen ƙimar mahaɗan MIDI da ake sarrafawa (kamar lamba a cikin kewayon 0 - 127 idan akwai 7 rago CC).
Sanya nuni
SKUs na yau da kullun:
Mini SKUs:
- Da zarar an saita nuni don manufa da aka bayar, ana iya kunna shi.
Makasudi
- 00h (0) - 1Fh (31): Yanayin zafi. nuni don sarrafa Analogue (daidai da fihirisar CC, 05h-0Dh: Faders, 15h-1Ch: encoders)
- 20h (32): Nuni na tsaye
- 21h (33): Nuni na wucin gadi na duniya (ana iya amfani dashi ga duk wani abu da ba shi da alaƙa da sarrafawar Analogue)
- 22h (34): Yanayin DAW da aka nuna sunan (Fiel 0, komai: tsoho)
- 23h (35): DAW Drum pad yanayin da aka nuna sunan (Fiel 0, komai: tsoho)
- 24h (36): Sunan da aka nuna yanayin yanayin mahaɗa (Fiel 0, fanko: tsoho)
- 25h (37): Sunan da aka nuna na yanayin shigar da plugin (Fiel 0, fanko: tsoho)
- 26h (38): Yana aika sunan da aka nuna yanayin yanayin (Fiel 0, fanko: tsoho)
- 27h (39): Yanayin shigar da sunan da aka nuna (Fiel 0, fanko: tsoho)
- 28h (40): Yanayin fader ƙarar suna nuna sunan (Fiel 0, komai: tsoho)
Saita
- The byte yana saita tsari da aiki na nuni. 00h da 7Fh suna da ƙima na musamman: Yana soke (00h) ko kuma ya kawo (7Fh) nuni tare da abubuwan da ke cikin sa na yanzu (kamar yadda taron MIDI, ƙaramar hanya ce don kunna nuni).
- Bit 6: Bada maɓallin ƙaddamarwa don samar da Temp. Nuna ta atomatik akan Canji (tsoho: Saita).
- Bit 5: Bada maɓallin ƙaddamarwa don samar da Temp. Nuna ta atomatik akan taɓawa (tsoho: Saita; wannan shine Shift + juya).
- Bit 0-4: Tsarin nuni
- Shirye-shiryen nuni:
- 0: Ƙimar musamman don soke nuni.
- 1-30: ID na tsari, duba tebur a ƙasa.
- 31: Ƙimar musamman don jawo nuni.
NOTE
- The arrangement is ignored for targets only setting names (22h(34) – 28h(40)), however for changing triggerability, it needs to be set non-zero (since the value 0 for these still acts for cancelling the display).
Saitin rubutu
- Da zarar an daidaita nuni, ana iya amfani da saƙon da ke gaba don cike filayen rubutu.
SKUs na yau da kullun:
Mini SKUs:
- Rubutun yana amfani da daidaitaccen taswirar halayen ASCII a cikin kewayon 20h (32) - 7Eh (126) tare da ƙari na lambobin sarrafawa na ƙasa, waɗanda aka sake sanyawa don samar da ƙarin haruffa marasa ASCII.
- Akwatin Babu - 1 Bh (27)
- Akwatin Cika - 1C (28)
- Alamar Fita - 1Dh (29)
- Zuciya - 1 Eh (30)
- Kada a yi amfani da wasu haruffa masu sarrafawa saboda halayensu na iya canzawa a nan gaba.
Bitmap
- Hakanan allon yana iya nuna zane-zane na al'ada ta hanyar aika bitmap zuwa na'urar.
SKUs na yau da kullun:
Mini SKUs:
- The <target> can be either the Stationary display (20h(32)) or the Global temporary display
- (21h(33)). There is no effect on other targets.
- The <bitmap_data> is of fixed 1216 bytes, 19 bytes for each pixel row, for a total of 64 rows
- (19 × 64 = 1216). The 7 bits of the SysEx byte encode pixels from left to right (highest bit corresponding to the leftmost pixel), the 19 bytes covering the 128 pixels width of the display (with five unused bits in the last byte).
- Bayan nasara, akwai martani ga wannan saƙon, wanda ya dace da raye-rayen raye-raye na lokaci (da zarar an karɓa, Launchkey yana shirye don karɓar saƙon Bitmap na gaba):
SKUs na yau da kullun:
Mini SKUs:
- Ana iya soke nunin ta ko dai soke shi a bayyane (ta amfani da Configure Display SysEx ko MIDI Event), ko jawo nuni na al'ada (wanda aka adana sigoginsa yayin da bitmap ke nunawa).
NOTE
- Firmware zai iya riƙe bitmap ɗaya kawai a cikin ƙwaƙwalwar ajiyarsa lokaci ɗaya.
Launchkey feature controls
- Yawancin fasalulluka na Launchkey za a iya sarrafa su ta hanyar saƙonnin MIDI CC da aka aika zuwa Launchkey's DAW a tashar jiragen ruwa a tashar 7 kuma ana tambaya ta hanyar aika saƙo iri ɗaya zuwa tashar 8. Saƙon amsawa masu tabbatar da canje-canje ko amsa tambayoyin za a aika a tashar 7.
- Don kunna ko kashe waɗannan sarrafawar a cikin keɓewa, yi amfani da saƙonnin da ke ƙasa.
Kunna sarrafa fasali:
Kashe abubuwan sarrafawa:
NOTE
- A cikin yanayin DAW, duk abubuwan sarrafawa suna sauraro, amma ba za su aika da amsar tabbatarwa ba sai kaɗan masu mahimmanci.
- A yanayin DAW, ana iya amfani da waɗannan saƙonnin da ke sama don kunna su gabaɗaya ko komawa zuwa saitin DAW.
- The CC messages must be sent to the Launchkey’s DAW in MIDI port.
- Ikon Nibble-Split suna amfani da mafi ƙarancin ƙima na ƙimar CC guda biyu don ƙirƙirar ƙimar 8-bit. Ƙimar CC ta farko ta zama mafi mahimmancin nibble.
- Siffofin da aka yiwa alama da (*) ba su da ƙarfi, suna dawwama a cikin kewayon wutar lantarki.
- Abubuwan da aka yiwa alama da (#) koyaushe ana kunna su cikin yanayin DAW.
| Lambar CC | Siffar | Sarrafa Nau'in | |
| Hex | Decimal | ||
| 02h:22h | (2:34) | Arp Swing | Madaidaicin 2 ya sanya hannu akan kashi 14 cikin ɗaritage |
| 03h:23h | (3:35) | Ikon lokaci | |
| 04h: 24h | (4:36) | Arp Kau da tsarin kari | nibble-tsaga bitmask |
| 05h: 25h | (5:37) | Arp Ties | nibble-tsaga bitmask |
| 06h: 26h | (6:38) | Lafazin Arp | nibble-tsaga bitmask |
| 07h: 27h | (7:39) | Arp Ratchets | nibble-tsaga bitmask |
| 1Dh (#) | (29) (#) | Zaɓi shimfidar pads | |
| 1 Eh (#) | (30) (#) | Zaɓan shimfidar maɓalli | |
| 1Fh (#) | (31) (#) | Zaɓi shimfidar Faders | |
| 3 Ch | (6) | Zaɓin halayen sikelin | |
| 3Dh (#) | (61) (#) | Tonic sikelin (tushen bayanin kula) zaɓi | |
| 3 Eh (#) | (62) (#) | Yanayin Sikeli (nau'in) zaɓi | |
| 3Fh (#) | (63) (#) | Shift | |
| 44h ku | (68) | DAW 14-bits Analogue fitarwa | Kunna/Kashe |
| 45h ku | (69) | DAW Encoder Dangantakar fitarwa | Kunna/Kashe |
| 46h ku | (70) | DAW Fader Pickup | Kunna/Kashe |
| 47h ku | (71) | Abubuwan DAW Touch | Kunna/Kashe |
| 49h ku | (73) | Arp | Kunna/Kashe |
| 4 Ah | (74) | Yanayin sikelin | Kunna/Kashe |
| 4 Ch | (76) | Ƙaddamar da bayanin Ayyukan DAW (Lokacin Kunna, Bayanan kula na Maɓalli suna zuwa DAW) | Kunna/Kashe |
| 4Dh ku | (77) | Yankunan allo, yanayi | 0: Sashe na A, 1: Sashe na B, 2: Raba, 3: Layer |
| 4 EH | (78) | Yankunan allo, maɓallin raba | Bayanin MIDI akan tsoffin maɓalli na octave |
| 4Fh (*) | (79) (*) | Yankunan allo, zaɓi haɗin Arp | 0: Sashe na A, 1: Sashe na B |
| 53h ku | (83) | DAW Drumrack launi mai aiki | |
| 54h ku | (84) | DAW Drumrack On / Off (When Off, Drumrack remains in MIDI mode while in DAW mode) | |
| 55h ku | (85) | Nau'in Arp (Up / Down da dai sauransu) | |
| 56h ku | (86) | Arp Rate (ciki har da Triplets) | |
| 57h ku | (87) | Arp Octave | |
| 58h ku | (88) | Arp Latch | Kunna/Kashe |
| 59h ku | (89) | Tsawon Ƙofar Arp | kashi daritage |
| 5 Ah | (90) | Ƙofar Arp mafi ƙarancin | millise seconds |
| 5 Ch | (92) | Arp Mutate | |
| 64h (*) | (100) (*) | MIDI Channel, Part A (or Keybed MIDI Channel for SKUs not having keyboard split) | 0-15 |
| 65h (*) | (101) (*) | Tashar MIDI, Sashe na B (Ana amfani dashi akan SKUs mai tsaga madannai) | 0-15 |
| 66h (*) | (102) (*) | MIDI Channel, Chords | 0-15 |
| 67h (*) | (103) (*) | Tashar MIDI, Ganguna | 0-15 |
| 68h (*) | (104) (*) | Maɓalli saurin lanƙwasa / Kafaffen gudu zaɓi | |
| 69h (*) | (105) (*) | Maɓallin saurin pads / Kafaffen gudu zaɓi | |
| 6 ah(*) | (106) (*) | Kafaffen ƙimar saurin gudu | |
| 6 Bh (*) | (107) (*) | Arp velocity (whether Arp should take velocity from its note input or use fixed velocity) | |
| 6 Ch (*) | (108) (*) | Nau'in bugun bayanta | |
| 6Dh (*) | (109) (*) | Pad aftertouch ƙofa | |
| 6 Eh (*) | (110) (*) | Fitowar agogon MIDI | Kunna/Kashe |
| 6Fh (*) | (111) (*) | Matsayin haske na LED | (0–127 where 0 is min, 127 is max) |
| 70h (*) | (112) (*) | Matsayin hasken allo | (0–127 where 0 is min, 127 is max) |
| 71h (*) | (113) (*) | Lokacin nuni na ɗan lokaci | Raka'a 1/10 seconds, mafi ƙarancin 1 daƙiƙa a 0. |
| 72h (*) | (114) (*) | Yanayin Vegas | Kunna/Kashe |
| 73h (*) | (115) (*) | Jawabin Waje | Kunna/Kashe |
| 74h (*) | (116) (*) | Pads ikon-kan tsoho yanayin zaɓi | |
| 75h (*) | (117) (*) | Yanayin wutar lantarki na tukwane zaɓi | |
| 76h (*) | (118) (*) | Faders ikon-kan tsoho yanayin zaɓi | |
| 77h (*) | (119) (*) | Yanayin Fader na al'ada | 0: Tsalle, 1: Karɓa |
| 7 Ah | (122) | Saitin Kasadar Taswirar Chord | 1-5 |
| 7 Bh ku | (123) | Saitin Taswirar Chord | 1-8 |
| 7 Ch | (124) | Saitin Yada Taswirar Chord | 0-2 |
| 7Dh ku | (125) | Saitin Rubutun Taswirar Chord | 0–100 milliseconds |
FAQs
Q: How do I switch between Standalone mode and DAW mode on the Launchkey?
A: To switch between Standalone (MIDI) mode and DAW mode, refer to the specific instructions provided in the user manual. Typically, Standalone mode is the default upon powering up the Launchkey.
Q: Can I use the Launchkey's MIDI interfaces simultaneously?
A: Yes, you can use both the USB and DIN MIDI interfaces on the Launchkey simultaneously for communication purposes.
Takardu / Albarkatu
 |
novation LAUNCHKEY MK4 USB MIDI Keyboard Controller [pdf] Jagorar mai amfani LAUNCHKEY MK4, LAUNCHKEY MK4 USB MIDI Keyboard Controller, USB MIDI Keyboard Controller, MIDI Keyboard Controller, Keyboard Controller |