KAYAN KASA SCXI NI Relay Switching Module

Bayanin samfur

SCXI-1129 na'urar sauya sheka ce ta kera ta National Instruments (NI). An ƙera shi don amfani da direban kayan aikin NI-SWITCH da software na direba NI-DAQmx. Wannan tsarin sauyawa yana ba masu amfani damar shigarwa cikin sauƙi, daidaitawa, da kuma saita canjin tsarin su.

Siffofin

• Sauƙi shigarwa da daidaitawa
• Mai jituwa tare da direban kayan aikin NI-SWITCH da software na direba NI-DAQmx
• Yana ba da ƙayyadaddun aikin dacewa na lantarki
• Ya zo tare da fakitin antistatic don hana fitarwar lantarki

Abubuwan Bukatun Tsarin

Domin amfani da direban kayan aikin NI-SWITCH, dole ne tsarin ku ya cika wasu buƙatu. Don cikakkun bayanai game da mafi ƙarancin buƙatun tsarin, tsarin da aka ba da shawarar, da wuraren haɓaka aikace-aikacen tallafi (ADEs), da fatan za a duba samfurin karantawa da ke kan DVD ɗin software ko kan layi a ni.com/updates.

Umarnin Amfani da samfur

Jagororin Daidaituwar Electromagnetic:

Don dacewa da dacewa da aikin lantarki, yana da mahimmanci a bi waɗannan jagororin:

• Yi aiki da tsarin sauyawa na SCXI-1129 tare da igiyoyi masu kariya da na'urorin haɗi kawai.
• Tabbatar cewa tsawon duk igiyoyin shigarwa/fitarwa (I/O) bai wuce mita 3 (ƙafa 10 ba).

Tabbatar da Abubuwan Kit ɗin:

Kafin a ci gaba da shigarwa, tabbatar da cewa kun karɓi duk abubuwan da suka dace waɗanda aka haɗa a cikin kit ɗin.

Cire kaya:

Bi waɗannan matakan don buɗe kayan canjin NI:

1. Yi ƙasa ta hanyar amfani da madauri na ƙasa ko ta riƙe wani abu mai tushe, kamar chassis na kwamfutarka.
2. Taɓa fakitin antistatic zuwa wani ɓangaren ƙarfe na chassis na kwamfuta don fitar da kowane tsayayyen wutar lantarki.
3. Cire na'urar daga fakitin antistatic kuma duba ta don kowane sako-sako da aka gyara ko alamun lalacewa.
4. Idan na'urar ta bayyana lalacewa, sanar da NI kuma kar a sanya ta cikin chassis.

Shigar da Software

Kafin shigar da samfurin canza NI, kuna buƙatar shigar da software na direba na NI-SWITCH. Bi waɗannan matakan don shigar da software:

1. Idan kuna haɓaka aikace-aikacen NI-SWITCH, zaku iya shigar da yanayin haɓaka aikace-aikacen (ADE) da zaɓi kamar Lab.VIEW ko LabWindowsTM/CVITM.
2. Shigar da sabbin fakitin sabis don tsarin aikin ku.
3. Saka NI-SWITCH DVD cikin faifan DVD. Ya kamata mai sakawa ya buɗe ta atomatik. Idan ba haka ba, kewaya zuwa DVD ɗin kuma danna sau biyu akan autorun.exe.
4. Bi umarnin da ke cikin shigarwar shigarwa don shigar da software na direba NI-SWITCH.
5. Bayan shigarwa ya cika, zaɓi "Sake kunnawa" lokacin da aka sa shi kuma cire DVD ɗin software na direba.

Jagororin Daidaitawa na Electromagnetic

An gwada wannan samfurin kuma ya dace da buƙatun tsari da iyaka don dacewa da lantarki (EMC) da aka bayyana a ƙayyadaddun samfur. An ƙirƙira waɗannan buƙatun da iyakoki don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da samfurin ke aiki a cikin yanayin aikin lantarki da aka yi niyya. An yi nufin wannan samfurin don amfani a wuraren masana'antu. Koyaya, tsangwama mai cutarwa na iya faruwa a wasu shigarwa, lokacin da aka haɗa samfurin zuwa na'urar gefe ko abu na gwaji, ko kuma idan ana amfani da samfurin a wuraren zama ko kasuwanci. Don rage tsangwama tare da liyafar rediyo da talabijin da hana lalata aikin da ba a yarda da shi ba, shigar da amfani da wannan samfur daidai da umarnin cikin takaddun samfurin. Bugu da ƙari, duk wani gyare-gyare ga samfurin da kayan aikin ƙasa ba su yarda da shi ba zai iya ɓata ikon ku na sarrafa shi ƙarƙashin ƙa'idodin ƙa'ida na gida.

• Tsanaki Don tabbatar da ƙayyadaddun aikin EMC, yi aiki da wannan samfurin kawai tare da igiyoyi masu kariya da na'urorin haɗi.
• Tsanaki Don tabbatar da ƙayyadaddun aikin EMC, tsawon duk igiyoyin I/O dole ne ya kasance bai wuce 3 m (10 ft).

Tabbatar da Bukatun Tsarin
Don amfani da direban kayan aikin NI-SWITCH, dole ne tsarin ku ya cika wasu buƙatu. Don ƙarin bayani game da mafi ƙarancin buƙatun tsarin, tsarin da aka ba da shawarar, da wuraren haɓaka aikace-aikacen tallafi (ADEs), koma zuwa karantawa samfurin, wanda ke samuwa akan DVD software na direba ko kan layi a ni.com/updates.

Tabbatar da Abubuwan da ke cikin Kit

• SCXI canza launi
• NI -SWITCH DVD software direba
• NI Canjawar Jagorar Farawa don NI SCXI sauya module (wannan takarda)
• Takaddun ƙayyadaddun bayanai don ku NI SCXI sauya module
• Karanta Ni Farko: Amincewa da Daidaituwar Electromagnetic

NI SCXI Abubuwan Da ake Bukata
Baya ga abubuwan da ke cikin kit ɗin, kuna buƙatar abubuwa masu zuwa don girka ko sarrafa na'urar ku.

• NI SCXI chassis ko NI PXI/SCXI chassis chassis
• Canja mai sarrafawa

Idan cabling kai tsaye zuwa mai sarrafawa, kuna buƙatar abubuwa masu zuwa:

• Adaftar USB
• Kebul

Bayanai masu alaƙa
Shigar da Hardware a shafi na 4

Ana kwashe kaya

Canja samfurin NI ɗinku yana jigilar kaya a cikin fakitin antistatic don hana fitarwar lantarki daga lalata abubuwan na'urar. Don hana irin wannan lalacewa lokacin da ake sarrafa na'urar, ƙasa da kanka ta amfani da madauri na ƙasa ko ta hanyar riƙe wani abu mai ƙasa, kamar chassis na kwamfutarka, kuma cika matakan masu zuwa:

1. Taɓa fakitin antistatic zuwa ɓangaren ƙarfe na chassis na kwamfuta kafin cire na'urar daga fakitin.
   Tsanaki Kada a taɓa fallasa fitattun masu haɗawa.
2. Cire na'urar daga kunshin kuma duba na'urar don abubuwan da ba su da kyau ko wata alamar lalacewa. Sanar da NI idan na'urar ta bayyana lalacewa ta kowace hanya. Kar a shigar da na'urar da ta lalace a cikin chassis.

Shigar da Software

Dole ne ku shigar da software na direba na NI-SWITCH kafin shigar da samfurin sauya NI. NI-Switch modules suna kunshe da NI-SWITCH da NI-DAQmx. Kowane direba yana da API ɗinsa tare da ɗakin karatu na VIs da ayyuka da zaku iya kira daga ADE ɗinku don tsara samfurin canza canjin NI.

1. Na zaɓi: Idan kuna haɓaka aikace-aikacen NI-SWITCH, shigar da ADE, kamar LabVIEW ko LabWindows™/CVI™.
2. Shigar da sabbin fakitin sabis don tsarin aikin ku.
3. Saka NI-SWITCH DVD cikin faifan DVD. Mai saka NI-SWITCH yakamata ya buɗe ta atomatik. Idan taga shigarwa bai bayyana ba, kewaya zuwa faifan DVD, danna maɓallin sau biyu, sannan danna autorun.exe sau biyu.
4. Bi umarnin da ke cikin shigarwar shigarwa don shigar da software na direba NI-SWITCH.
5. Lokacin da mai sakawa ya gama, zaɓi Sake farawa a cikin akwatin maganganu wanda ke tambaya idan kuna son sake kunnawa, rufewa, ko sake kunnawa daga baya kuma cire DVD ɗin software na direba.

Shigar da Hardware

Dole ne ku shigar da software kafin shigar da kayan aikin. Kafin ka shigar da na'urar, koma zuwa jagororin a cikin Kulawa da Ƙaddamar da Ƙwararrun Ƙwararru ga Masu amfani da aka haɗa tare da tsarin don tabbatar da cewa na'urar zata iya kwantar da kanta yadda ya kamata. Hakanan ana samun wannan takaddar a ni.com/manuals.

• Tsanaki NI SCXI na'urori masu sauyawa kayan aiki ne masu mahimmanci waɗanda yakamata a kula dasu a hankali. Don hana lalacewar na'urar da ESD ko gurɓatawa ke haifarwa, sarrafa na'urar ta amfani da gefuna ko madaidaicin ƙarfe.
• Tsanaki Tsaftace kayan aikin da goga mai laushi mara ƙarfe. Tabbatar cewa kayan aikin sun bushe gaba ɗaya kuma ba su da gurɓatawa kafin mayar da shi zuwa sabis.

Don zaɓar da shigar da mai sarrafa canji, kammala matakai masu zuwa:

1. Tabbatar cewa mai sarrafa canjin ku yana goyan bayan tsarin sauyawa da kuke son sanyawa. Koma zuwa tebur mai zuwa.
   • Tebur 1. NI SCXI Switches masu goyan bayan NI Switch Controllers
2. 
3. Lura Wasu masu kula da canjin canji, kamar NI USB-1357/1358/1359, na iya haɗa tsarin sauyawa na NI SCXI kai tsaye zuwa kwamfuta. A madadin, mai sarrafa sauyawa da aka shigar a cikin mafi girman ramin PXI na NI PXI-1010/1011/1050/1052 chassis baya buƙatar ƙarin igiyoyi ko adaftar don haɗawa zuwa tsarin sauyawa. Lura Na'urar NI 4060 na iya sarrafa NI SCXI-1127/1128/1129/1160/1161/1163R/1190 na'urar sauya fasalin da aka saita ta amfani da NI-DAQ na Gargajiya (Legacy).
4. Gano adaftar kit(s) da ake buƙata don kebul na mai sarrafawa ko kwamfutar zuwa NI SCXI sauya module.
5. Ƙayyade tsarin shigarwa da ya dace don shigar da tsarin sauya NI. Koma zuwa tebur mai zuwa.

Tebur 2. Ƙayyade Tsarin Shigar da Sauyawa NI SCXI

Nau'in Chassis	NI Switch Controller Type	Tsarin Shigarwa
NI SCXI-1000 ko NI SCXI-1001	PCI ko PXI ko NI USB M Series da aka ƙare da taro	2
	NI USB-135x	4
	Saukewa: SCXI-1600	5

Nau'in Chassis	NI Switch Controller Type	Tsarin Shigarwa
NI PXI-1010 ko NI PXI-1050	PXI4 a cikin mafi girman ramin PXI	3
	PXI baya cikin ramin PXI daidai	2
	PXI Express mai jituwa5 a cikin kowane rami	2
	NI USB-135x	4
	Saukewa: SCXI-1600	5
NI PXI-1011 ko NI PXI-1052	PXI6 a cikin mafi girman ramin PXI	3
	Saukewa: SCXI-1600	5

Lura Na'urar NI 4060 tana iya sarrafa NI SCXI-1127/1128/1129/1160/1161/1163R/1190 na'urar sauya fasalin NI-DAQ na Gargajiya.
Bayanai masu alaƙa
Koma zuwa Taimakon Sauyawa na NI don ƙarin bayani game da masu sarrafa canjin NI da na'urorin adaftar.

Tsarin shigarwa 1

Shigar da tsarin sauya NI SCXI a cikin tsarin da ake da shi. Koma zuwa adadi mai zuwa kuma kammala matakan da ke gaba don shigar da tsarin sauya fasalin NI SCXI a cikin tsarin da ke akwai.

Hoto na 1. Shigar da Module Canjin NI SCXI a cikin Tsarin da yake da

1. Sabon NI SCXI Canja Module
2. Module na NI SCXI
3. NI SCXI Chassis
4. Mai Gudanarwa
   1. Kashe wuta kuma cire chassis.
   2. Cire kwamitin filler daga ramin SCXI da ba a yi amfani da shi ba.
   3. Taɓa kowane ɓangaren ƙarfe na chassis don fitar da wutar lantarki a tsaye.
   4. Saka tsarin sauyawa a cikin ramin SCXI.
   5. Mayar da maɓallin gaban mai sauyawa zuwa tashar jirgin saman chassis na gaba mai hawa dogo.

Tsarin shigarwa 2
Shigar da tsarin sauya NI SCXI a cikin kowane saiti masu zuwa:

• NI SCXI-1000/1001 chassis tare da NI PCI ko NI PXI mai sarrafawa
• NI PXI-1010/1050 chassis tare da mai sarrafawa ba a cikin mafi girman ramin PXI na chassis ba.
• NI PXI-1010/1050 chassis tare da NI PXI Express mai daidaita sauyawa mai dacewa a cikin kowane rami na chassis

Koma zuwa adadi na gaba kuma ku cika matakan da ke gaba don shigar da tsarin sauyawa na NI SCXI.

Hoto na 2. Shirye-shiryen Chassis

1. Canjin Wuta na Chassis
2. Canjawar Adireshin Chassis
3. Saitunan Wutar Chassis
4. Mai haɗa igiyar wuta
   1. Kashe wuta kuma cire chassis.
   2. Shigar da mai sarrafa canji, gami da kowane kit(s) adaftar, kamar yadda aka bayyana a cikin takaddun mai sarrafawa.
      • Lura Tabbatar cewa har yanzu ana kashe chassis kafin ci gaba da shigar da na'urar sauya sheka.
   3. Saita adireshin chassis yana canzawa zuwa matsayin KASHE. Idan kuna amfani da chassis na SCXI da yawa, tabbatar da kowane chassis yana da adireshi na musamman na binary.
      Lura Tun da farko chassis suna amfani da masu tsalle-tsalle a cikin sashin gaban chassis maimakon masu sauya adireshin chassis. Tun da farko chassis shima ya bambanta a cikin fuses da zaɓin wutar AC. Koma zuwa takaddun takamaiman ga chassis ɗin ku don ƙarin bayani.
   4. Tabbatar da daidaitattun saitunan wutar lantarki na chassis (100, 120, 220, ko 240 VAC).
   5. Cire kwamitin filler daga ramin SCXI da ba a yi amfani da shi ba.
   6. Taɓa kowane ɓangaren ƙarfe na chassis don fitar da wutar lantarki a tsaye.
   7. Saka tsarin sauyawa a cikin ramin SCXI.
   8. Mayar da maɓallin gaban mai sauyawa zuwa tashar jirgin saman chassis na gaba mai hawa dogo.

Bayan ka shigar da tsarin, ƙayyade nau'in mai sarrafawa da kake son amfani da shi. Don ƙarin bayani game da cabing module zuwa mai sarrafawa, koma zuwa NI E Series ko M Series, 10-Pin Rear Connector, ko 50-Pin Rear Connector.

Bayanai masu alaƙa
Komawa Karanta Ni Farko: NI-DAQmx da DAQ Jagoran Shigar Na'urar idan kana shigar da na'urar NI M Series. Koma zuwa Jagoran Farawa na Digital Multimeters idan kuna shigar da NI 407x.
NI E Series ko M Series
Koma zuwa adadi mai zuwa kuma kammala matakai masu zuwa don kebul na mai sarrafawa zuwa tsarin sauyawa. Yi la'akari da cewa na'urar NI E Series ko M Series na iya kebul kai tsaye zuwa kebul na NI SCXI kawai tare da mai haɗin baya mai 50-pin.
Hoto na 3. Caking wani NI E Series ko M Series Device zuwa NI SCXI Canja Module

1. NI SCXI Module Canjawa tare da Mai Haɗin Baya 50-Pin
2. NI SCXI-1000/1001 ko NI PXI-1010/1050 Chassis
3. NI SCXI-1349 Adaftar Cable
4. NI SH6868 Cable
5. NI E Series ko M Series Device

10-Pin Rear Connector
Dole ne ku ƙayyade adadin fil akan mai haɗin baya na NI SCXI canza module ɗin ku don zaɓar saitin matakan da suka dace don kebul na mai kunnawa zuwa tsarin sauyawa. Koma zuwa adadi mai zuwa kuma cika matakan da ke biyowa don kebul mai sarrafa sauyawa zuwa NI SCXI sauyawa module tare da haɗin baya mai 10-pin don NI 4021/407x ko NI PXI/PCI-4065.
Hoto na 4. Yin cajin NI 4021/407x ko NI PXI/PCI-4065 zuwa Module Mai Haɗi na Rear Rear 10-pin

1. NI SCXI Module Canjawa tare da Mai Haɗin Baya 10-Pin
2. HVAB Connector
3. 10-Pin Rear Connector
4. SH9MD-AUX Cable
5. NI Switch Controller
6. NI SCXI-1359 Adaftar Cable
7. NI SCXI-1000/1001 ko NI PXI-1010/1050 Chassis

Bayanai masu alaƙa
Koma zuwa Taimakon Sauyawa na NI don ƙarin bayani game da masu haɗin kai akan NI SCXI-1359.
50-Pin Rear Connector
Dole ne ku ƙayyade adadin fil akan mai haɗin baya na NI SCXI canza module ɗin ku don zaɓar saitin matakan da suka dace don kebul na mai kunnawa zuwa tsarin sauyawa. Koma zuwa adadi mai zuwa kuma cika matakan da ke biyowa don kebul mai sarrafa sauyawa zuwa NI SCXI sauyawa module tare da haɗin baya mai 50-pin don NI 4021/407x ko NI PXI/PCI-4065.
Hoto na 5. Yin cajin NI 4021/407X ko NI PXI/PCI-4065 zuwa Module Mai Haɗin Baya na 50-Pin

1. NI SCXI Module Canjawa tare da Mai Haɗin Baya 50-Pin
2. NI SCXI-1000/1001 ko NI PXI-1010/1050 Chassis
3. NI SCXI-1362 Adaftar Cable
4. NI Switch Controller
5. SH9MD-AUX Cable

Tsarin shigarwa 3
Shigar da NI PXI-1010/1011/1050/1052 chassis tare da mai sarrafa PXI a cikin mafi girman ramin PXI na chassis.
Lura Ba a buƙatar igiyoyi don haɗa tsarin sauyawa zuwa mai sarrafa sauyawa. Koma zuwa adadi na gaba kuma ku cika matakan da ke gaba don shigar da tsarin sauyawa na NI SCXI.
Hoto na 6. NI Mai Canjawa Mai Sarrafawa a cikin Ramin PXI Dama

1. NI PXI-1010/1050 Chassis
2. NI PXI-1011/1052 Chassis
3.  Mai sarrafawa
   1. Kashe wuta kuma cire chassis.
   2. Shigar da mai sarrafa canji, gami da kowane kit(s) adaftar, kamar yadda aka bayyana a cikin takaddun mai sarrafawa.
   3. (NI PXI-1010 kawai) Saita adireshin chassis yana canzawa zuwa matsayin KASHE kamar yadda aka nuna a cikin adadi mai zuwa.
   4. Tabbatar da daidaitattun saitunan wutar lantarki na chassis (100 VAC, 120 VAC, 220 VAC, ko 240 VAC).
      • Lura Koma zuwa takaddun takamaiman na chassis ɗin ku don daidaitaccen voltage don yankin ku.
   5. Cire kwamitin filler daga ramin SCXI da ba a yi amfani da shi ba.
   6. Taɓa kowane ɓangaren ƙarfe na chassis don fitar da wutar lantarki a tsaye.
   7. Saka tsarin sauyawa a cikin ramin SCXI.
   8. Mayar da maɓallin gaban mai sauyawa zuwa tashar jirgin saman chassis na gaba mai hawa dogo.
   9. Ƙarfi akan chassis.

Bayanai masu alaƙa
Koma zuwa ga Karanta Ni Farko: NI-DAQmx da Jagoran Shigar Na'urar DAQ idan kuna shigar da na'urar NI PXI/PCI M Series. Koma zuwa Jagoran Farawa na Digital Multimeters idan kuna shigar da NI 407x.
Tsarin shigarwa 4
Haɗa na'ura mai sarrafa / adaftar kebul na NI kai tsaye zuwa na'urar sauya sheka ta NI SCXI tare da mai haɗin baya 10-pin. Koma zuwa wannan adadi kuma cika matakan da ke gaba don shigar da na'ura mai sauyawa NI SCXI da kebul zuwa NI USB
Hoto na 7. Cable wani NI USB Mai Canja wurin Mai Canja wurin Module Canja Mai Haɗin Baya 10-Pin

1. NI SCXI Canja Module
2. HVAB Connector
3. 10-Pin Rear Connector
4. Kebul na USB
5. NI Switch Controller
6. NI 1359 Adaftar Cable
7. NI SCXI-1000/1001 ko NI PXI-1010/1050 Chassis
   1. Kashe wuta kuma cire chassis.
   2. Saita adireshin chassis yana canzawa zuwa matsayin KASHE.
      Lura Tun da farko chassis suna amfani da masu tsalle-tsalle a cikin sashin gaban chassis maimakon masu sauya adireshin chassis. Tun da farko chassis shima ya bambanta a cikin fuses da zaɓin ikon AC. Koma zuwa takaddun takamaiman ga chassis ɗin ku don ƙarin bayani.
   3. Tabbatar da daidaitattun saitunan wutar lantarki na chassis (100 VAC, 120 VAC, 220 VAC, ko 240 VAC).
      Lura Koma zuwa takaddun takamaiman na chassis ɗin ku don daidaitaccen voltage don yankin ku.
   4. Cire ɓangaren filler a cikin ramin SCXI da ba a yi amfani da shi ba.
   5. Taɓa kowane ɓangaren ƙarfe na chassis don fitar da wutar lantarki a tsaye.
   6. Saka tsarin sauyawa a cikin ramin SCXI.
   7. Mayar da maɓallin gaban mai sauyawa zuwa tashar jirgin saman chassis na gaba mai hawa dogo.
   8. Haɗa NI USB-1359, wanda aka haɗa tare da kit, zuwa ga bayan NI SCXI sauya module. Tabbatar cewa mai haɗin baya mai 10-pin na tsarin sauyawa yana haɗawa zuwa mai haɗin baya na ƙasa mai 10-pin baƙar fata na NI USB-1359.
   9. Mayar da adaftar jirgin baya zuwa layin dogo mai hawa chassis.
   10. Ƙarfi akan chassis. Dole ne ku kunna chassis kafin ku haɗa NI USB-1359 zuwa kwamfutar don gano NI USB-1359 ta atomatik da ƙirƙirar chassis ta atomatik a MAX.
       Lura Idan kana amfani da NI PXI-1010/1050 chassis yana bayyana a MAX azaman NI SCXI-1000 chassis.
   11. Haɗa ƙarshen kebul na USB ɗaya zuwa NI USB-1359 da sauran ƙarshen zuwa tashar USB ko tashar USB akan kwamfuta.

Bayanai masu alaƙa
Koma zuwa Taimakon Sauyawa NI don ƙarin bayani game da masu haɗin haɗin kan NI USB-1359. Koma NI 1357/1358/1359 SCXI Controller/Adapter Installation Kit don ƙarin bayani game da sarrafa kebul na USB.
Tsarin shigarwa 5
Shigar da tsarin sauyawa a cikin kowane chassis na SCXI tare da NI SCXI-1600 mai sarrafa module wanda aka sanya a cikin kowane rami a cikin chassis. Koma zuwa adadi na gaba kuma ku cika matakan da ke gaba don shigar da tsarin sauyawa na NI SCXI.
Hoto na 8. Sanya Module Canjin NI SCXI a cikin Chassis na SCXI tare da Manajan NI SCXI-1600

1. Sabon NI SCXI Canja Module
2. NI SCXI-1600 Mai Sarrafa Module
3. NI SCXI Chassis
   1. Kashe wuta kuma cire chassis.
   2. Shigar da kuma saita NI SCXI-1600 mai sarrafa maɓalli na sauyawa.
      • Lura Tabbatar cewa har yanzu ana kashe chassis kafin ci gaba da shigar da na'urar sauya sheka.
   3. Cire kwamitin filler daga ramin SCXI da ba a yi amfani da shi ba.
   4. Taɓa kowane ɓangaren ƙarfe na chassis don fitar da wutar lantarki a tsaye.
   5. Saka tsarin sauyawa a cikin ramin SCXI.
   6. Mayar da maɓallin gaban mai sauyawa zuwa tashar jirgin saman chassis na gaba mai hawa dogo.
   7. Haɗa ƙarshen kebul na USB ɗaya zuwa NI SCXI-1600 da sauran ƙarshen zuwa tashar USB ko tashar USB akan kwamfuta.

Bayanai masu alaƙa
Koma zuwa SCXI Quick Start Guide don ƙarin bayani game da shigarwa da daidaitawa NI SCXI-1600.
Ana saita Hardware a cikin MAX
Canjin ku na SCXI da mai sarrafa ku sun ƙayyade zaɓin daidaitawar ku na MAX. Koma zuwa tebur mai zuwa don tantance zaɓuɓɓukan daidaitawar ku na MAX.
Tebur 3. Zaɓuɓɓukan Kanfigareshan MAX

NI Controller	NI SCXI-1127/1128/1129/ 1160/1161/1163R/ 1190/1191/1192 Sauyawa	Duk Sauran Sauyawan NI SCXI
NI 407x, NI 4065, M Series, NI 4021	NI-DAQmx/Ni-DAQ na Gargajiya (Legacy)	NI-DAQmx
Farashin 4060	NI-DAQ na Gargajiya (Legacy)	-
USB NI	NI-DAQmx

Lura Na'urar NI 4060 na iya sarrafawa kawai
NI SCXI-1127/1128/1129/1160/1161/1163R/1190 canza modules ta amfani da Traditional NI-DAQ (Legacy). Don bayanin goyan bayan software, koma zuwa teburin da ya gabata.

1. Kaddamar da MAX ta hanyar kewayawa zuwa Fara"Dukkan Shirye-shiryen"Kayan Kayayyakin Ƙasa"NI MAX ko ta danna gunkin tebur na NI MAX.
2. Danna-dama na Na'urori da Mu'amala. Zaɓi Ƙirƙiri Sabuwa.
3. A cikin Ƙirƙiri Sabuwar taga, je zuwa NI-DAQmx SCXI Chassis. Zaɓi chassis SCXI da kake son ƙarawa. Saita saitunan masu zuwa:
   •  Zaɓi mai sarrafa sauyawa (NI USB-1359 ko NI 407x) da aka keɓance zuwa tsarin sauyawa na SCXI mai sadarwa daga akwatin jerin gwano na Chassis Communicator. Idan MAX ya gano na'urar sadarwa guda ɗaya kawai, ana zaɓar wannan na'urar azaman mai sadarwar chassis ta tsohuwa kuma akwatin lissafin yana dimmed.
   • (Kits NI SCXI kawai) Zaɓi ramin module ɗin da aka haɗa da mai sadarwa na chassis daga jerin zaɓuka na Module Slot na Sadarwar SCXI.
   • A cikin akwatin rubutun Chassis Address, shigar da saitin adireshin chassis da ya dace. Ana nuna saitunan madaidaicin adireshi mai tsalle-tsalle a cikin ma'amala mai mu'amala ta DIP mai canzawa a cikin taga daidaitawa. Tabbatar saitin software ya dace da ainihin saitin adireshin chassis akan chassis na SCXI.
   • Idan kana son NI-DAQ ta gano abubuwan SCXI ta atomatik a cikin chassis, duba Auto-Detect All Modules.
4. Danna Ajiye idan kun gama.
5. Danna dama na SCXI chassis da kuka ƙara. Zaɓi Sanya.
6. A cikin taga SCXI Chassis Kanfigareshan, danna shafin Modules. Zaɓi tsarin da kake son ƙarawa daga Modules drop-down listbox.
7. Danna cikakkun bayanai don saita saitunan tsarin.

Haɗin Sigina zuwa Canja Tubalan Tasha

Koma zuwa takaddun don toshewar tashar ku don shigar da toshe tasha da haɗa sigina zuwa samfurin sauya NI.

Shirye-shiryen Samfurin Sauyawa NI

Kuna iya samun bayanai ta hanyar mu'amala ta amfani da NI-SWITCH Soft Front Panel (SFP), ko kuma kuna iya sarrafa na'urar ta tsari ta amfani da direban kayan aikin NI-SWITCH. Kuna iya amfani da NI-SWITCH don tsara na'urar a cikin yanayin haɓaka aikace-aikacen (ADE) da kuka zaɓa.

Tebur 4. NI Canja Kayan Shirye-shiryen Zaɓuɓɓukan

Shirye-shiryen Aikace-aikace Interface (API)	Wuri	Bayani
NI-SWITCH SFP	Akwai daga Fara menu ko NI Launcher a cikin Windows 8.	Yana ba da hanyar sadarwa mai hoto don sarrafawa da viewgame da yanayin samfurin ku na canza NI.
NI-SWITCH Direban Kayan aiki	LabVIEW ko LabWindows/CVI- Akwai akan LabVIEW palette ayyuka a Ma'auni I/O» NI-SWITCH.	Yana fasalta saitin ayyuka da halayen da ke motsa dukkan ayyukan aikin sauya samfurin NI, gami da daidaitawa, sarrafawa, da wasu takamaiman ayyuka na na'ura.
	C ko LabWindows/CVI- Akwai a Shirin Files \IVI Foundation\IVI \Drivers\niSWITCH.
	An shigar da examples don Visual C/C++ suna cikin NI-SWITCH Karatun.	Koma zuwa ga Ƙirƙirar Application tare da Microsoft Visual C/C++ topic a cikin NI Sauyawa Taimako don bayani game da haɓaka aikace-aikacen NI-SWITCH.
NI-DAQmx Direban Kayan aiki	Akwai daga Fara menu ko NI Launcher a cikin Windows 8. Don nemo examples, ku ni.com/info kuma shigar da lambar Bayani daqmxexp. Don ƙarin examples, koma zuwa zone.ni.com.	Kuna iya sarrafa samfuran canza NI tare da NI-DAQmx API. NI-DAQmx yana da amfani yayin amfani da sikanin kayan masarufi tare da samfuran sauya NI da yawa. NI-DAQmx API yana goyan bayan duk samfuran canza NI kuma baya yarda da IVI.

NI-SWITCH Examples
Exampdon nuna aikin na'urar kuma kuyi aiki azaman ƙirar shirye-shirye da tubalan ginin aikace-aikacen ku. NI Example Finder shine mai amfani don wasu aikace-aikacen software waɗanda ke tsara tsohonamples cikin rukunoni kuma yana ba ku damar bincika da bincika shigar tsohonamples. Kuna iya ganin kwatancen da samfuran kayan aiki masu jituwa ga kowane tsohonample ko ganin duk tsohonampya dace da samfurin hardware guda ɗaya.
Tebur 5. Wurin NI-SWITCH Examples

Aikace-aikacen Software	Yadda ake gano Examples
LabVIEW ko LabWindows/CVI	Gano wuri examptare da NI Exampda Finder. A cikin LabVIEW ko LabWindows/CVI, zaɓi Taimako»Nemo Examples kuma kewaya zuwa Hardware Input da Fitarwa»Kayan aikin Modular.
ANSI C ko Microsoft Visual C/C++	Gano wuri examples a cikin \NI-SWITCH\ misaliamples directory, inda yana ɗaya daga cikin kundayen adireshi masu zuwa: • Windows XP—Takardu da Saitunan Duk Masu Amfani Takardun Kayan Ƙasa • Windows 7/8/Vista—Users\Public\Takardu \Kayan ƙasa

Inda Za A Gaba
Koma zuwa adadi mai zuwa don bayani game da wasu ayyukan samfur da abubuwan haɗin gwiwa don waɗannan ayyukan.

• Ana cikin kayan aikin hardware
• Yana kan layi a ni.com/manuals.
• Located ta amfani da NI Exampda Finder

 

Karin Bayani A: Daidaitawar PXI Express
Modulin PXI da aka gyara shine ƙirar PXI mai haɗaɗɗiyar ramin da ke dacewa inda aka maye gurbin mai haɗin baya na sama da ƙaramin mai haɗawa. Koma zuwa adadi mai zuwa don tantance ko samfurin canza NI ɗin ku ya dace da haɗin ramuka.

Hoto na 9. Module na PXI da PXI Express Module masu jituwa

1. Madaidaicin Module Canjin PXI
2. PXI Express Module Canja Mai Haɓaka

Tsarin PXI wanda ya dace da ramin matasan zai iya aiki a cikin ramummuka masu zuwa:

• Daidaitaccen Ramin PXI ko NI PXI/PXI Express chassis
• PXI module mai dacewa da ramin Hybrid
• Lura Ba kamar nau'ikan nau'ikan ramuka masu jituwa ba, katunan PXI za su iya aiki kawai a daidaitattun ramummuka na PXI. Matakan PXI masu dacewa da ramummuka masu jituwa suna kiyaye waɗannan fasalulluka:

Tebur 6. Haɓakar Haɗin Ramin Haɓakawa PXI Module Features

Daidaituwar software	Haɗin ramin haɗin gwiwa yana buƙatar babu canje-canje ga aikace-aikacen da ke akwai da/ko software na direba.
Ƙayyadaddun bayanai	Matsakaicin ramin haɗin gwiwa baya canza ƙayyadaddun bayanai.
Sadarwar PXI	Matsakaicin ramukan haɗe-haɗe yana goyan bayan data kasance lokacin lokacin PXI da kuma damar jawo PXI.

NI Sauyawa
Modules Canjawa na SCXI™ Wannan takaddar tana bayanin yadda ake girka, daidaitawa, da kuma saita tsarin sauya kayan aikin SCXI na ƙasa. NI SCXI switch module ɗinku na jigilar kaya tare da direban kayan aikin NI-SWITCH, wanda zaku iya amfani da shi don tsara na'urar.Wannan takaddar tana ƙunshe da bayanai game da software ɗin direba na NI-DAQmx, wanda kuma kuna iya amfani da shi don tsara NI-Switch modules. Kaddamar da NI-DAQmx daga Fara menu, ko don Windows 8, daga NI Launcher. Lura Kariyar da samfuran ku na canza NI za a iya lalacewa idan aka yi amfani da su ta hanyar da ba a bayyana a cikin wannan takaddar ba. Koma zuwa takaddun chassis NI PXI/PXI Express naku don tantance waɗanne ramummuka ne ramummukan PXI, ramin PXI Express, ko PXI Express Hybrid ramummuka.
Bayanai masu alaƙa
Koma zuwa Taimakon Sauyawa NI don cikakkun bayanai game da fasali da zaɓuɓɓukan shirye-shirye don samfurin canza NI na ku.
Bayanai masu alaƙa
Koma zuwa PXI Systems Alliances don ƙayyadaddun gyare-gyare don haɗa siginar PCI Express cikin PXI
Taimako da Sabis na Duniya
The National Instruments webshafin shine cikakken albarkatun ku don tallafin fasaha. A ni.com/support kuna da damar yin amfani da komai tun daga warware matsala da albarkatun haɓaka aikace-aikacen taimakon kai zuwa imel da taimakon waya daga Injiniyoyin Aikace-aikacen NI. Ziyarci ni.com/services don Ayyukan Shigar Masana'antar NI, gyare-gyare, ƙarin garanti, da sauran ayyuka. Ziyarci ni.com/register don yin rijistar samfuran kayan aikin ku na ƙasa. Rijistar samfur yana sauƙaƙe goyan bayan fasaha kuma yana tabbatar da cewa kun karɓi mahimman sabuntawar bayanai daga NI. Sanarwa na Daidaitawa (DoC) ita ce da'awarmu ta yarda da Majalisar Ƙungiyoyin Ƙungiyoyin Turai ta yin amfani da sanarwar yarda da masana'anta. Wannan tsarin yana ba da kariya ga mai amfani don dacewa da lantarki (EMC) da amincin samfur. Kuna iya samun DoC don samfurin ku ta ziyartar ni.com/certification. Idan samfurin ku yana goyan bayan gyare-gyare, za ku iya samun takardar shaidar daidaitawa don samfurin ku a ni.com/calibration. Babban hedkwatar kamfanin Instruments na kasa yana a 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments kuma yana da ofisoshi a duk faɗin duniya. Don tallafin waya a Amurka, ƙirƙirar buƙatar sabis ɗin ku a ni.com/support ko kuma ka buga lambar waya 512 795 8248. Domin samun tallafi ta tarho a wajen Amirka, ka ziyarci sashen ofisoshin da ke ni.com/niglobal don shiga ofishin reshe. webshafukan yanar gizo, waɗanda ke ba da bayanan tuntuɓar zamani, tallafin lambobin waya, adiresoshin imel, da abubuwan da ke faruwa a yanzu. NI Sauya Jagorar Farawa | © Kayayyakin Ƙasa | 21 Koma zuwa Alamomin kasuwanci na NI da Jagororin Tambura a ni.com/trademarks don bayani kan alamun kasuwanci na Instruments na ƙasa. Sauran samfura da sunayen kamfani da aka ambata a nan alamun kasuwanci ne ko sunayen kasuwanci na kamfanoni daban-daban. Don haƙƙin mallaka da ke rufe samfuran / fasaha na ƙasa, koma zuwa wurin da ya dace: Taimako» Halayen mallaka a cikin software ɗin ku, ikon mallaka.txt file a kan kafofin watsa labarai, ko National Instruments Patent Notice a ni.com/patents. Kuna iya samun bayani game da yarjejeniyar lasisin mai amfani (EULAs) da sanarwar doka ta ɓangare na uku a cikin readme file don samfurin NI. Koma zuwa Bayanin Yarda da Fitarwa a ni.com/legal/export-compliance don Tsarin Kayayyakin Ƙasa na ƙayyadaddun ƙayyadaddun tsarin ciniki na duniya da yadda ake samun lambobi masu dacewa na HTS, ECNs, da sauran bayanan shigo da / fitarwa. © 2010-2013 Kayayyakin Ƙasa. An kiyaye duk haƙƙoƙi. 375471B-01 Agusta 13

Takardu / Albarkatu

KAYAN KASA SCXI NI Relay Switching Module [pdf] Jagorar mai amfani SCXI-1127, SCXI-1128, SCXI-1129, SCXI-1130, SCXI-1160, SCXI-1161, SCXI-1163R, SCXI-1166, SCXI-1167, SCXI-1169, SCXI-1190, SCXI-1191, SCXI-1192, SCXI-1193. SCXI- 1194, SCXI-1195, SCXI-XNUMX, SCXI-XNUMX, SCXI NI Relay Switching Module, Relay Switching Module, Canja Module

Magana

• Manual mai amfani