MOSO X6 Series LED Driver Programming Software

Bayanin samfur: MOSO LED Driver Programming Software (X6 jerin)

MOSO LED Driver Programming Software kunshin software ne da aka tsara don tsarawa da sarrafa direban MOSO LED. Ya haɗa da fasali daban-daban kamar saitin direba na LED na yanzu, zaɓin yanayin dimming, saitin siginar dusashewa, saita mai ƙidayar lokaci, da ƙari. Ana iya shigar da software akan Windows XP, Win7, Win10 ko sama da tsarin aiki tare da sigar Microsoft.NET Framework 4.0 ko sama da haka.

Abubuwan da ke ciki

• Yanayin aiki na software
• Sanya direbobi dongle na USB (Programmer).
• Umarnin aiki software

Muhallin Aiki na Software

MOSO LED Driver Programming Software yana buƙatar kayan masarufi da yanayin software masu zuwa:

• CPU: 2GHz da sama
• 32-bit ko fiye RAM: 2GB da sama
• Hard Disk: 20GB da sama
• I/O: linzamin kwamfuta, madannai
• Tsarin aiki: Windows XP, Win7, Win10 ko sama
• Bangaren: Microsoft.NET Framework 4.0 ko sama da sigar

Sanya Direbobin Dongle na USB (Programmer).

MOSO LED Driver Programming Software yana buƙatar dongle na USB (mai tsara shirye-shirye) don haɗawa da direban LED. Don shigar da kunshin software na direba dongle na USB, bi matakan da ke ƙasa:

1. Buɗe MOSO LED Driver Programming Software kunshin kuma nemo babban fayil ɗin Driver Dongle na USB.
2. Bude babban fayil ɗin Driver kuma zaɓi direban da ya dace file dangane da tsarin aikin ku (32-bit ko 64-bit).
3. Shigar CDM20824_Setup (direba don Windows XP) .exe akan tsarin Windows XP da CDM21228_Setup (driver for Win7 Win10).exe akan Win7 da sama.

Lura: Idan ba za ku iya buɗe software ba bayan shigarwa, kuna iya buƙatar shigar da abin dogara da software, wanda za'a iya samuwa a cikin babban fayil ɗin Driver.

Umarnin Aiki na Software

Bi umarnin da ke ƙasa don amfani da MOSO LED Driver Programming Software:

1. Fara software
2. Haɗa zuwa direban LED ta hanyar dongle na USB
3. Karanta sigogin direban LED
4. Saita direban LED na yanzu
5. Zaɓi yanayin dimming
6. Yi amfani da bayanin maɓallin aiki don samun dama ga fasalulluka daban-daban kamar saitin rage siginar, rage ƙidayar lokaci, da ƙari
7. Karanta rikodin bayanai

Yanayin aiki na software

Hardware muhalli

• CPU: 2GHz da sama (32-bit ko fiye)
• RAM: 2GB da sama
• HD: 20GB da sama
• I/O: linzamin kwamfuta, keyboard

Yanayin software

• Tsarin aiki: Windows XP, Win7, Win10 ko sama.
• Bangaren: Microsoft.NET Framework 4.0 ko sama da sigar.

Sanya direbobi dongle na USB (Programmer).

Software na MOSO LED Driver shirye-shirye ya ƙunshi abubuwan da ke sama files, wanda babban fayil ɗin Driver USB Dongle shine fakitin direban software.

Bude babban fayil ɗin Driver, An nuna shi azaman adadi mai zuwa:

Shigar CDM20824_Setup (direba don Windows XP) .exe akan tsarin Windows XP da CDM21228_Setup (driver for Win7 Win10).exe akan Win7 da sama.
Direba file yana buƙatar zaɓar bisa ga adadin raƙuman tsarin aiki (32-bit ko 64-bit).

Hanyar magana ita ce kamar haka:

1. Sanya abubuwan dogaro da software (na zaɓi)
   Kunshin dogaro, kamar yadda sunan ke nunawa, software na buƙatar dogaro da abubuwan haɗin software na waje. Duba "Hoto 7: Babban fayil ɗin Driver" file jeri.
   Ba lallai ba ne a shigar a cikin yanayi na al'ada (ana iya shigar da shi lokacin shigar da tsarin aiki), idan ba za ku iya buɗe software da aka nuna a cikin Hoto 1 ba, kuna buƙatar shigarwa.
2. Umarnin aiki software
   Gumakan gajeriyar danna sau biyu don fara software. Kamar yadda aka nuna a kasa,

Haɗa zuwa direban LED

Da farko shigar da "USB Programmer" a cikin kebul na tashar jiragen ruwa na kwamfuta, da kuma haɗa da sauran karshen da dimming waya na LED direban. Danna "Haɗa" don haɗa software zuwa direban LED, kamar yadda aka nuna a cikin hoton da ke ƙasa.
Idan haɗin ya yi nasara, za a nuna saurin "Nasara" a saman mahaɗin. Idan an saita wutar lantarki tare da samfurin a baya, za ta canza ta atomatik zuwa samfurin da ya dace, in ba haka ba zai zama ƙirar tsoho (mai amfani da aka bayyana).
A lokaci guda, lanƙwan UI na samfurin da ya dace yana nunawa a hagu. Nuni mai lanƙwasa yana ba da damar wurin aiki (akwatin mai dige launin toka), wurin aiki na shirye-shirye (yankin shuɗi), madaurin wutar lantarki akai-akai (layin ja mai dige), fitarwa vol.tage kewayon (Vmin ~ Vmax), cikakken iko voltage range da sauran bayanai. Yankin aikin shirye-shirye yana canzawa bisa ga saitin halin yanzu.

Karanta sigogin direban LED
Danna "Karanta" don karanta ma'aunin wutar lantarki. Wannan aikin na iya duba daidaita ma'aunin wutar lantarki.

Siffofin da za a iya karantawa sun haɗa da:

1. Saita yanayin halin yanzu da dimming;
2. Ko don kashe, dimming voltage, da kuma ko a mayar da hankali dimming;
3. Matsalolin dimming mai sarrafa lokaci;
4. CLO sigogi.

Saita direban LED na yanzu
Za'a iya saita fitarwar halin yanzu na wutar lantarki bisa ga ainihin buƙatu. Kamar yadda aka nuna a kasa. Lokacin da aka daidaita magudanar ruwa daban-daban, yankin aikin shirye-shiryen UI curve yana canzawa bisa ga saita halin yanzu
canji.

Zaɓi yanayin dimming
Wannan software tana goyan bayan yanayin dimming na zaɓi biyu: “Signal Dimming” da “Timer Dimming”.
Dimming siginar ya haɗa da "0-10V", "0-9V", "0-5V", "0-3.3V" analog vol.tage dimming da daidai voltagda PWM dimming.

Bayanin maɓallin aiki

• Karanta: karanta sigogin daidaitawar direba da nunawa ga UI;
• Na baya: mayar da sigogin UI zuwa ma'auni na asali na masana'anta;
• Shigo: shigo da ma'auni da aka adana daga a file kuma nuna su akan UI;
• Ajiye: Ajiye ma'auni na nunin dubawa zuwa a file;
• Shirye-shirye: rubuta sigogin da aka tsara zuwa direba;
• Zazzage zuwa mai tsara shirye-shirye na layi: Rubuta sigogin direba da aka saita zuwa mai tsara shirye-shiryen layi.

Lura: Mai tsara shirye-shirye na layi shine kayan aikin shirye-shirye wanda MOSO ya haɓaka wanda zai iya kammala shirye-shiryen direba ba tare da dogaro da kwamfuta ba. Kit ɗin yana da sauƙin amfani kuma yana da sauri don tsarawa. Don cikakkun bayanai game da wannan samfur, da fatan za a tuntuɓi ma'aikatan tallace-tallace.

 

Saita Dimming Sigina
Zaɓi shafin "Signal Dimming" don saita sigogi masu alaƙa.

1. Saita aikin Cut-off
   Idan aikin Cut-off ya kunna, duba "Yanke Saitin" da "Yanke-kashe". Idan ba a kunna aikin Cut-off ba, duba "Yanke Saitin" kuma cire "Yanke-kashe".
   Lokacin da kuka canza ƙirar tuƙi, saitin kashewa zai loda saitunan tsoho na wannan ƙirar.
   Idan "Kuna da kashe aikin" an duba, samfurin zai kashe abin da ake fitarwa a halin yanzu (na yanzu shine 0) lokacin da mai raguwa.tage kasa da "kashe darajar"; A wannan lokacin, kawai lokacin da dimming voltage ya dawo zuwa fiye da "darajar dawowa", za a sake kunna fitarwa na yanzu, kuma ya fi ko daidai da "mafi ƙarancin ƙima".
   Lokacin da "kunna/kashe aikin" ba a duba ba, abin fitarwa na yanzu ba zai kashe ba kuma zai kasance a "ƙananan ƙimar" ko sama.
   Lura: Idan hardware na samar da wutar lantarki na wani samfurin baya goyan bayan kashe wuta, don Allah kar a duba "Aikin Kunnawa/Kashe". Kashewa da farfadowa suna amfani da tsoffin ƙima, waɗanda ba za a iya gyara su ba.
2. Saita Dimming Voltage
   4 iri na Dimmer Voltage za a iya zabar: 0-10V, 0-9V, 0-5V, 0-3.3V. Ana iya zaɓar shi bisa ga ainihin abin da ake fitarwa mai dimming voltage daidaita halin da ake ciki.
3. Saita Reverse Dimming
   Reverse dimming: wato, jujjuyawar hankali. Mafi girman shigarwa voltage na dimming waya, ƙananan fitarwa na yanzu na direba, da ƙananan shigarwa voltage na dimming waya, mafi girma fitarwa halin yanzu na direba.
   Don kunna aikin juyawa baya, duba "Sabuntawa saitunan dimming" da "Reverse dimming". Idan ba a duba "Reverse Dimming" ba, yana da kyau dimming.
   Layin Sigina Max. Voltage fitarwa: yana ɗaukar tasiri lokacin zaɓin “Layin Sigina Max. Voltage” an duba. A wannan lokacin, wayoyi masu lalacewa za su haifar da fitarwa voltage, wanda shine game da 10-12V don "0-10V" da "0-9V" zažužžukan, kuma game da 5V don "0-5V" da "0-3.3V" zažužžukan.

Saita Lokacin Dimming
Bayan zaɓin “Timer Dimming”, zaku iya saita sigogi masu alaƙa na raguwar lokaci. Wannan software tana goyan bayan nau'ikan saitunan rage lokacin rage lokaci.

1. Lokacin Gargajiya
   Bayan an kunna direban LED, yana aiki daidai da saita lokacin "matakin aiki" da ikon fitarwa. A cikin wannan yanayin, adadin matakai, lokacin kowane mataki da ikon fitarwa koyaushe ana daidaita su. Masu amfani za su iya saita sigogi masu alaƙa na matakan da aka yiwa alama a cikin akwatin ja kamar yadda ke ƙasa gwargwadon buƙatarsu.
2. Kashi Na Karɓar Kai
   Duba zaɓin "Kashi Adapting-Kashi", kuma zaɓi lokacin tunani.

Daidaita-Kashi Kashi:
Wannan aikin shine daidaitawa da yanayin cewa lokacin dare shima yana canzawa tare da yanayi, kuma ma'aunin tsayin lokaci na raguwar lokaci shima yana canzawa daidai. Don amfani da wannan aikin, kuna buƙatar saita sigogi a cikin "Saita lokaci" da farko. Manhajar za ta lissafta daren yau a daren yau gwargwadon lokacin dare (kwanakin nuni) na kwanakin baya. Idan aka ce an saita “kwanakin nuni” zuwa kwanaki 7, ana ɗaukar matsakaicin lokacin dare na kwanaki 7 na farko a matsayin lokacin dare na daren yau. Sannan daidaita ta atomatik (bisa ga girman matakan) lokacin aiki na kowane mataki (ban da mataki na 0) daidai da lokacin daren wannan yamma. ExampLe: Ka ɗauka cewa ma'aunin kowane mataki shine: Mataki na 1 shine sa'o'i 2 da mintuna 30 kuma ƙarfin shine 100%; Mataki na 2 shine sa'o'i 3 da mintuna 30 kuma ikon shine 80%; Mataki na 3 shine awa 2 da mintuna 0 kuma ikon shine 50%. Jimlar tsawon matakan uku shine sa'o'i 8. Dangane da matsakaicin lokacin dare a cikin kwanaki 7 da suka gabata, lokacin dare shine awa 10. Sa'an nan tsawon lokaci na mataki 1 za a daidaita ta atomatik zuwa (2 hours da 30 minutes) × 10 ÷ 8 = 150 minutes × 10 ÷ 8 = 3 hours da 7.5 minutes; kama da wannan lissafin, tsawon lokacin mataki na 2 za a daidaita shi ta atomatik zuwa sa'o'i 4
Minti 22.5, tsawon lokacin mataki na 3 ana daidaita shi ta atomatik zuwa awanni 2 da mintuna 30. Lokacin farkon dare shine lokacin shirye-shirye na al'ada.

Daidaita Kai - Tsakar dare
Duba "Dare-Tsakar Dare" kuma saita kwanakin nuni, tsaka-tsaki, da lokacin farko.

Daidaita Kai-Tsakar Dare: Dangane da kiyasin lokacin hasken wuta, ana ƙara lanƙwan daga tsakiya zuwa hagu da dama bi da bi.

• “Ranakun Magana”: Daidai da “Kashi-Kashi na Daidaita Kai”, lokacin daren kwanakin da suka gabata.
• "Tsakar dare" shine lokacin daidaitacce, tare da jan layi na tsaye.
• "Lokaci na farko (lokacin lokaci)" shine tsawon lokacin hasken da aka saita, da kuma jan layi a kwance a cikin lokaci.
• "Lokaci na ainihi (lokacin lokaci)": Ƙididdiga ta tsawon lokacin haske dangane da kwanakin tunani, layin kwance mai shuɗi a cikin lokaci.

Bayan an kunna direban LED, yana aiki bisa ga matakin daidaitawa (ainihin lokacin) mataki da lokaci da ikon fitarwa. Lanƙwan matakin yanki da aka nuna da rawaya a cikin hoton da ke ƙasa.

Lura: Ba kamar sauran nau'ikan lokaci guda biyu ba, matakan daidaita tsakani suna amfani da saitunan lokacin dangi. Lokacin farawa mataki 1 shine 15:00, kuma sauran matakan an tsara su cikin tsari.

Karanta rikodin bayanai

Danna "Karanta" don karanta log ɗin aikin direba.

Login aikin wutar lantarki, gami da:
Matsakaicin zafin jiki na yanzu, matsakaicin zafin tarihi, matsakaicin zafin jiki na ƙarshe, matsakaicin zafin jiki na yanzu, da jimlar lokacin aiki na direba.

Hakanan zaka iya duba sigar firmware direba.

• "1.Current temp: halin yanzu zafin jiki."
• "2.T_Max Tarihi: Mafi girman zafin jiki da aka rubuta a tarihi."
• "3.Lokaci na baya T_ Max: Yi rikodin mafi girman zafin jiki yayin amfani da baya."
• "4.Wannan lokacin T_ Max: Yi rikodin mafi girman zafin jiki yayin wannan amfani."
• "5.Total lokacin aiki: Yi rikodin jimlar lokacin aiki."
• "6.Firmware Ver.: Driver firmware version."

Saita CLO
Zaɓi "Fara CLO (Fitarwa na Lumen Constant)", saita lokacin aiki da kashi ɗaya daidai da diyya na yanzu.tage, kuma danna "Programming".

Kashi na diyya na yanzutage shine kaso na yanzu da aka saitatage. Matsakaicin kashi daritage yana canzawa bisa ga canjin saiti na yanzu, kuma matsakaicin ba zai iya wuce 20% na saitin halin yanzu ba.

• Fitarwa voltage: Izinin aiki voltage kewayon bayan rama halin yanzu.
• Ƙarfin fitarwa: Kewayon ikon fitarwa a cikin ikon aiki voltage kewayon ƙarƙashin saitin halin yanzu. Matsakaicin ƙimar shine ikon bayan rama halin yanzu.

Takardu / Albarkatu

MOSO X6 Series LED Driver Programming Software [pdf] Jagoran Jagora X6 Series, X6 Series LED Driver Programming Software, LED Driver Programming Software, Driver Programming Software, Programming Software, Software

Magana

• Manual mai amfani