Jagoran Fara Mai SauriPRO SERIES DL155/DL154/DL153/DL152/DL151
Kafaffen Naúrar I/O

Muhimman Umarnin Tsaro

Tashoshin da aka yiwa alama da wannan alamar suna ɗauke da wutar lantarki mai isasshiyar girma don zama haɗarin girgiza wutar lantarki. Yi amfani da igiyoyin lasifika masu inganci kawai tare da ¼” TS ko matosai masu kulle-kulle waɗanda aka riga aka shigar. Duk sauran shigarwa ko gyare-gyare yakamata a yi ta ƙwararrun ma'aikata kawai.
Wannan alamar, a duk inda ta bayyana, tana faɗakar da ku game da kasancewar ƙaramin voltage cikin yadi - voltage wanda zai iya isa ya zama haɗarin girgiza.
Wannan alamar, a duk inda ta bayyana, tana faɗakar da ku ga mahimman umarnin aiki da kulawa a cikin wallafe-wallafen da ke biye. Da fatan za a karanta littafin.
Tsanaki
Don rage haɗarin girgizawar lantarki, kar a cire murfin saman (ko sashin baya) .Babu sassan masu amfani a ciki. Koma hidima ga ƙwararrun ma'aikata.
Tsanaki
Don rage haɗarin wuta ko girgiza wutar lantarki, kar a bijirar da wannan na'urar ga ruwan sama da danshi. Kada a fallasa na'urar ga ɗigowa ko watsa ruwa kuma babu wani abu da aka cika da ruwa, kamar vases, da za a sanya a kan na'urar.
Tsanaki
Waɗannan umarnin sabis don amfanin ƙwararrun ma'aikatan sabis ne kawai. Don rage haɗarin girgizawar lantarki kada ku yi wani sabis banda wanda ke cikin umarnin aiki. Dole ne ƙwararrun ma'aikatan sabis su yi gyare -gyare.

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8. Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake biyu daya fadi fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin wanda ya daina aiki.
10. Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
11. Yi amfani da haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
12. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa.
13. Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
14. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar wutar lantarki ko toshe ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta gamu da ruwan sama ko danshi, ba ta aiki yadda ya kamata. , ko kuma an jefar da shi.
15. Za a haɗa na'urar zuwa madaidaicin soket na MAINS tare da haɗin ƙasa mai karewa.
16. Inda aka yi amfani da filogi na MAINS ko na'urar haɗa kayan aiki azaman na'urar cire haɗin, na'urar cire haɗin za ta kasance cikin sauƙin aiki.
17. Daidaitaccen zubar da wannan samfur: Wannan alamar tana nuna cewa ba dole ba ne a zubar da wannan samfurin tare da sharar gida, bisa ga umarnin WEEE (2012/19/EU) da dokar ku ta ƙasa. Ya kamata a kai wannan samfurin zuwa cibiyar tattarawa mai lasisi don sake yin amfani da kayan lantarki da na lantarki (EEE). Rashin sarrafa irin wannan sharar gida na iya yin mummunan tasiri ga muhalli da lafiyar ɗan adam saboda abubuwa masu haɗari waɗanda gabaɗaya ke da alaƙa da EEE. Hakazalika, haɗin gwiwar ku wajen zubar da wannan samfurin daidai zai ba da gudummawa ga ingantaccen amfani da albarkatun ƙasa. Don ƙarin bayani game da inda za ku iya ɗaukar kayan aikin ku don sake amfani da su, tuntuɓi ofishin ku na gida ko sabis na tattara sharar gida.
18. Kar a shigar a cikin keɓaɓɓen wuri, kamar akwatin littafi ko naúrar makamancin haka.
19. Kada a sanya maɓuɓɓugar harshen wuta, kamar fitilu masu haske, akan na'urar.
20. Da fatan za a tuna da abubuwan muhalli na zubar da baturi. Dole ne a zubar da batura a wurin tarin baturi.
21.  Ana iya amfani da wannan na'urar a cikin wurare masu zafi da matsakaicin yanayi har zuwa 45 ° C.

RA'AYIN DOKA

Kabilar kiɗa ba ta yarda da wani alhaki ga kowace asarar da kowane mutum zai iya fuskanta wanda ya dogara ko dai gaba ɗaya ko a wani ɓangare na kowane kwatance, hoto, ko bayanin da ke ƙunshe a ciki. Bayanan fasaha, bayyanuwa da sauran bayanai suna iya canzawa ba tare da sanarwa ba. Duk alamun kasuwanci mallakin masu su ne. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones, da Coolaudio alamun kasuwanci ne ko alamun kasuwanci masu rijista na Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Duka haƙƙin mallaka.

GARANTI MAI KYAU

Don sharuɗɗan garantin da sharuɗɗan garanti da ƙarin bayani game da Ƙabilar Kiɗa
Iyakantaccen Garanti, don Allah a duba cikakkun bayanai akan layi a community.musictribe.com/pages/support#warranty.

Jerin PRO DL155/DL154/DL153/DL152/DL151 Gudanarwa

Sarrafa

FANIN GABA

1. Grill mai iska
2. Alamar Matsayin PSU - Matsayin samar da wutar lantarki
   LEDs ga kowane tashar wutar lantarki
3. Matsayin Sarrafa Ethernet - Matsayin koren LED don tashar sarrafa Ethernet
4. Alamar Matsayin AES50 - Green 'Ok' da ja' matsayin 'KUSKURE' LEDs don tashoshin AES50
5. LCD - 2 x 16 hali blue backlit ruwa crystal nuni
6. Gudanar da Kanfigareshan - 'Menu', 'Zaɓi', 'Up' da 'Ƙasa' maɓallan don daidaita abubuwan menu.
   PANEL NA DAYA
   
7. Katin I/O 'A' - 8-tashar I/O matsayin katin
8. Katin I/O 'B' - 8-tashar I/O matsayin katin
9. Mais Power Inlet – IEC mashigai tare da na'urar sauya sheka
10. Katin I/O 'C' - 8-tashar I/O matsayin katin
11. Tashar tashar bincike - 9W 'D' mai haɗin don amfani da bincike
12. Kunna Yanayin Boot
13. Tashar jiragen ruwa AES50 - 2 x masu haɗin Neutrik 'Ethercon' masu ƙarfi tare da LEDs masu mahimmanci
14. Ethernet Control Port - 1 x Neutrik mai kauri
15. Haɗin 'Ethercon' tare da LEDs masu mahimmanci

Ƙayyadaddun bayanai

Haɗin Waje

Abubuwan Shiga Analogue na Farko	Abubuwan shigar da Mic / Layi - daidaitattun masu haɗin XLR - nauyin 10 kΩ
Abubuwan Analogue na Farko	Babban Fitarwa - Madaidaitan masu haɗin XLR - 50 Ω tushe
Abubuwan Shiga na Farko na Dijital	Masu haɗin XLR - 110R
Haɗin AES50	Neutrik Ethercon tare da alamar matsayi
Haɗin bincike	9 W mace 'D' mai haɗa nau'in
Haɗin Wuta	IEC mains mashigai - 100-240 V AC ~ 50-60 Hz ± 10%

Bayanan Lantarki na Audio

Matsakaicin Matsayin shigarwa	Mic/Line (a samun haɗin kai)	+ 21 dBu
	Mic/Layin (a -2.5 dB riba)	+ 24 dBu
CMR a 1 kHz (na al'ada)	Mic (a haɗin kai)	> -70 dB
	Mic (a 40 dB riba)	90 dB
Surutu	Mic EIN a 40 dB riba	-126 dbu
	Fitar da hayaniya a samun haɗin kai	-86 dbu
Amsa Mitar	20 Hz - 20 kHz	± 0.5dB
Karya a 1 kHz	Shigarwa zuwa fitarwa (0 dB)	<0.01%
Crosstalk a 1 kHz	Channel zuwa channel	<-90 dB
Matsakaicin Matsayin fitarwa	Abubuwan fitar da layi (zuwa 600R)	+ 21 dBu
Rage mai ƙarfi a 1 kHz	22 Hz - 22 kHz (a haɗin kai)	> 107 dB mara nauyi (20 Hz - 20 kHz)

Bukatun Wuta

Voltage	100V AC zuwa 240V AC ± 10%
Yawanci	50 zuwa 60 Hz
Amfani	<150 W

Na zahiri

Tsayi	Kimanin 88.1 mm (2U)
Nisa	Kimanin 482.6 mm (19.0 ″)
Zurfin	Kimanin 380 mm (15.0 ″)
Cikakken nauyi	Kimanin 6.5 kg
Nauyin jigilar kaya	Kimanin 8.5 kg
Yanayin zafin aiki	+5 ° C zuwa 45 ° C
Ma'ajiyar zafin jiki	-20°C zuwa +60°C

Abubuwan Shiga na Dijital

Mai haɗawa	AES3 (tashoshi biyu na audio dijital) akan 3-pin XLR
Sampda rates	Yana karɓar kowane mitar tsakanin 32k zuwa 96k
Ketare	A sampza a iya ƙetare madaidaicin madaidaicin

Abubuwan Dijital

Mai haɗawa	AES3 (tashoshi biyu na audio dijital) akan 3-pin XLR
Sampda rates	48k, 96k, ko sa ido ta atomatik zuwa abubuwan da aka shigar
Ketare	A sampza a iya ƙetare madaidaicin madaidaicin
Tsawon kalma	16-, 20- ko 24-bit

Wasu muhimman bayanai

1. Yi rijista akan layi. Da fatan za a yi rajistar sabon kayan aikin Kiɗa na ku nan da nan bayan kun saya ta ziyartar musictribe.com. Rijista siyan ku ta amfani da fom ɗin mu na kan layi mai sauƙi yana taimaka mana don aiwatar da da'awar gyara ku cikin sauri da inganci. Hakanan, karanta sharuɗɗan garantinmu, idan an zartar.
2. Rashin aiki. Idan mai siyar da Izinin Ƙirar Kiɗa ɗin ku bai kasance a kusa da ku ba, kuna iya tuntuɓar Mai Cika Izin Ƙabilar Kiɗa don ƙasarku da aka jera a ƙarƙashin “Tallafawa” a musictribe.com. Idan ba a jera ƙasarku ba, da fatan za a bincika ko za a iya magance matsalar ku ta hanyar “Tallafin Kan layi” wanda kuma ana iya samunsa ƙarƙashin “Taimako” a musictribe.com. A madadin, da fatan za a ƙaddamar da da'awar garantin kan layi a musictribe.com KAFIN mayar da samfur.
3. Haɗin Wuta. Kafin shigar da naúrar a cikin soket ɗin wuta, da fatan za a tabbatar cewa kuna amfani da madaidaicin madannin wutar lantarkitage don samfurin ku na musamman. Dole ne a maye gurbin fis ɗin da ba daidai ba tare da fiusi iri ɗaya da ƙima ba tare da togiya ba.

BAYANIN KIYAYEWA HUKUMAR SADARWA TA TARAYYA
Midas
PRO SERIES
DL155/DL154/DL153/DL152/DL151

Sunan Jam'iyya Mai Alhaki:	Wakokin Kabilar Kasuwanci NV Inc.
Adireshi:	122 E. 42 St.1, hawa na 8 NY, NY 10168, Amurka
Adireshin i-mel:	legal@musictribe.com

PRO SERIES DL155/DL154/DL153/DL152/DL151
An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class A, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa lokacin da ake sarrafa kayan aiki a cikin yanayin kasuwanci. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani da shi daidai da littafin koyarwa, na iya haifar da kutse mai cutarwa ga sadarwar rediyo. Yin aiki da wannan kayan aiki a wurin zama na iya haifar da tsangwama mai cutarwa wanda idan mai amfani zai buƙaci ya gyara tsangwamar da kuɗin kansa.

Wannan na'urar ta bi Sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2.  dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.

Gargaɗi: Aiki da wannan kayan aikin a mazaunin da zai iya haifar da kutse ta rediyo.
Bayani mai mahimmanci:
Canje-canje ko gyare-gyare ga kayan aikin da ƙungiyar kiɗa ba ta amince da ita ba na iya ɓata ikon mai amfani na amfani da kayan.

Anan, Kabilar Kiɗa ta ba da sanarwar cewa wannan samfurin ya dace da Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU da Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/ 2012 REACH SVHC da Umurnin 1907/2006/EC.
Ana samun cikakken rubutun EU DoC a https://community.musictribe.com/
Wakilin EU: Kabilan Kiɗa Brands DK A/S
Adireshin: Gammel Strand 44, DK-1202 København K, Denmark
Wakilin Burtaniya: Music Tribe Brands UK Ltd.
Adireshi: 6 Lloyds Avenue, Unit 4CL London EC3N 3AX, United Kingdom

Takardu / Albarkatu

MIDAS Pro Series DL155 Kafaffen Tsarin Shigarwa ko Sashin fitarwa [pdf] Jagorar mai amfani Pro Series DL155, Pro Series DL154, Pro Series DL153, ​​Pro Series DL152, Pro Series DL151, Fixed Format Input or Output Unit, Pro Series DL155 Input Format Format or Output Unit

Magana

• Manual mai amfani