merten 682192 Analog Input Bus System KNX REG
Gargadin aminci
Hankali:
Dole ne a shigar da kayan aikin lantarki da ƙwararrun masu lantarki kawai kuma cikin tsananin kiyaye ƙa'idodin rigakafin haɗari masu dacewa. Rashin lura da kowane kayan aikin shigarwa na iya haifar da wuta da wasu hatsari.
Ba a ba da izinin amfani da igiyoyi masu haɗawa ban da waɗanda Merten ya amince da su kuma yana iya yin mummunan tasiri akan amincin lantarki da ayyukan tsarin.
Aiki
- Wannan tsarin shigar da analog yana ƙara tashar yanayi ta EIB, sashi na 682991. 682191, ko shigarwar analog na EIB, sashi. a'a. XNUMX, ta ƙarin abubuwan shigar da firikwensin guda huɗu don masu fassarar ana-log.
- Ana auna kimanta bayanai da iyakance aiki a cikin na'urar EIB.
- Tsarin shigar da analog ɗin na iya kimanta duka juzu'itage da sigina na yanzu:
- Sigina na yanzu 0…20mA DC 4…20mA DC
- Voltage siginar 0…1V DC 0…10V DC
- Ana sa ido kan abubuwan da ke cikin halin yanzu don karya waya.
Shigarwa
Gargadin aminci
Amfani da igiyoyi masu haɗawa ban da waɗanda Merten ya amince da su ba a ba su izini ba kuma yana iya yin mummunan tasiri akan amincin lantarki da ayyukan tsarin.
Ɗauki na'urar a kan 35 x 7.5 babban dogo na hat kamar yadda DIN EN 50022. Don aiki, tsarin shigar da analog yana buƙatar tushen 24 V na waje kamar wutar lantarki REG, AC 24 V/1 A, part no. 663629. Na ƙarshe kuma na iya samar da na'urori masu auna firikwensin da aka haɗa ko na'urar EIB da aka haɗa.
Haɗin kai, sarrafawa
- +Mu: samar da wutar lantarki na waje transducers
- GND: ref. yuwuwar +Us da abubuwan shigar K1…K4
- K1… K4: abubuwan da aka auna-daraja
- 24V AC: wutar lantarki ta waje voltage
- 6-pole system bas: mai haɗa tsarin, 6-pole, don haɗin haɗin shigarwar analog
- (A): Matsayi LED, launi uku (ja, orange, kore)
- (B): transducer
An haɗa wutar lantarki na na'urori masu auna firikwensin
- Ana iya ba da duk na'urori masu auna firikwensin da aka haɗa ta tashoshi + US da GND na tsarin shigar da analog.
- Jimlar yawan amfani na yanzu na duk na'urori masu auna firikwensin da aka kawo ta wannan hanya dole ne ya wuce 100mA.
- Ana samar da tashoshi +US da GND a cikin kwafi kuma suna da haɗin kai a ciki.
- A cikin yanayin gajeriyar da'ira tsakanin +US da GND, voltage za a kashe.
- Hakanan ana iya ba da firikwensin da aka haɗa a waje (misali idan yawan amfanin su na yanzu ya wuce 100mA). A irin wannan yanayin, dole ne a haɗa haɗin kai zuwa abubuwan shigar da firikwensin tsakanin tashoshi K1…K4, da GND.
Dokokin shigarwa
Da fatan za a kiyaye waɗannan ƙa'idodi na asali lokacin shigar da samfurin shigar da analog:
- Ana iya aiwatar da maye gurbin na'ura (idan maras kyau) ta ɗayan nau'in iri ɗaya yayin aiki (don wannan dalili, cire haɗin tsarin daga wutar lantarki). Bayan maye gurbin, na'urar EIB za ta sake saitawa bayan wasu s 25. Wannan zai sake fara duk abubuwan da aka shigar da abubuwan da aka fitar na na'urar EIB da na kayan aikin da aka haɗa da sake saita su zuwa asalinsu.
- Cire ko ƙara kayayyaki ba tare da daidaita tsarin su ba da kuma zazzagewa na gaba cikin na'urar EIB ba a yarda ba saboda wannan zai haifar da lalacewar tsarin.
Na'urori masu auna firikwensin dacewa don haɗi
Ga kowane ɗayan masu fassara masu zuwa, software ɗin tana ba da ƙimar saiti. Idan an yi amfani da wasu na'urori masu auna firikwensin, dole ne a tantance sigogin da za a saita a gaba.
| Nau'in | Amfani | Sashe a'a. |
| Haske | waje | 663593 |
| Magariba | waje | 663594 |
| Zazzabi | waje | 663596 |
| Iska | waje | 663591 |
| Iska (tare da dumama) | waje | 663592 |
| Ruwan sama | waje | 663595 |
Matsayin LED
A lokacin ƙaddamarwa
- A: Module yana shirye don aiki (gwajin kansa Ok).
- Kiftawa da sauri: Module yana farawa.
- KASHE: Module an ƙaddamar da farawa.
- Yanayin sharaɗi: Dole ne LED ya kasance a baya.
A cikin aiki na yau da kullun
- A: Module bai shirya don aiki ba (yanayin kuskure).
- KASHE: Module an ƙaddamar da farawa.
- Yanayin sharaɗi: Dole ne LED ya kasance a baya.
Ƙayyadaddun bayanai
Tushen wutan lantarki
- Ƙarar voltage: 24 VAC ± 10%,
- Amfani na yanzu: 170mA max.
- Amfanin wutar lantarki na EIB: Ikon 150 mW.
- Yanayin yanayi: -5 °C zuwa +45 °C
- Ma'ajiya/zazzabi na sufuri: -25 °C zuwa +70 °C
Danshi
- Na yanayi/ajiya/ sufuri: 93 % RH max., Babu condensation
- Tsarin kariya: IP20 kamar yadda DIN 60529
- Faɗin shigarwa: 4 diamita / 70 mm
- Nauyi: kusan 150g ku
Haɗin kai
- Abubuwan shigarwa, wutar lantarki: dunƙule tashoshi:
- guda-waya 0.5 mm2 zuwa 4 mm2
- igiyar da aka makale (ba tare da ferrule ba) 0.34 mm2 zuwa 4 mm2
- waya mai makale (tare da ferrule) instabus EIB: 0.14 mm2 zuwa 2.5 mm2 haɗawa da tashar reshe
- Haɗa na'urar EIB: 6-Pole system connector
- Lambar shigarwar Sensor: 4x analog,
- Ƙimar firikwensin (analogin sigina):
- 0 .. 1 V DC, 0 .. 10 V DC,
- 0 .. 20mA DC, 4 .. 20mA DC
- Voltage auna impedance: kimanin. 18 kΩ
- Ma'aunin auna na yanzu: kimanin. 100 Ω
- Samar da wutar firikwensin waje (+Us): 24VDC, 100mA max.
Dangane da gyare-gyaren fasaha.
Takardu / Albarkatu
 |
merten 682192 Analog Input Bus System KNX REG [pdf] Jagoran Jagora 682192 Analog Input Bus System KNX REG, 682192, Analog Input Bus System KNX REG, 682192 Analog Input Bus System, KNX REG, Analog Input Bus System, Input Bus System, Bass System |
