KYAU KYAU PWM-120 Series 120W Constant Voltage PWM Fitar da Jagorar Mai amfani da Direba

Siffofin 

• Maɗaukaki voltage PWM salon fitarwa.
• Ana samun aikace-aikacen hasken gaggawa bisa ga IEC61347-2-13.
• Ayyukan PFC da aka gina a ciki da ƙirar Il
• Babu amfani da wutar lantarki <0.5W/ yawan wutar jiran aiki <0.5W( nau'in DA/DA2)
• Cikakken encapsulated tare da matakin IP67
• Zaɓuɓɓukan ayyuka: 3 a cikin 1 dimming (dim-to-off); DALI/DALI-2
• Matsakaicin raguwar matakin 0.2% don nau'in DALI
• Yawanci rayuwa> 50000 hours da 5 shekaru garanti

Aikace-aikace

• LED tsiri lighting
• Hasken LED na cikin gida
• LED kayan ado lighting
• Hasken gine -ginen LED
• Hasken masana'antu
• Rubuta "HL" don amfani a cikin aji |, yanki na 2 mai haɗari (classified) wuri.

GTIN CODE 

Binciken MW: https://www.meanwell.com/serviceGTIN.aspx

Bayani

Jerin PWM-120 shine direban 120W AC / DC LED wanda ke nuna madaidaicin voltage yanayin tare da fitowar salon PWM,
wanda ke da ikon kula da yanayin zafin launi da daidaituwar haske yayin tuki kowane nau'in tube na LED. PWM-120 yana aiki daga 90 ~ 305VAC kuma yana ba da samfura tare da ƙididdiga daban-dabantage jeri tsakanin 12V da 48V. Godiya ga babban inganci har zuwa 90.5%, tare da ƙira mara kyau, duk jerin suna iya aiki don -40 ° C ~ + 90 ° C yanayin zafin jiki a ƙarƙashin iskar iska kyauta. Dukkanin jerin an ƙididdige su tare da matakin kariya na ingress IP67 kuma ya dace da yin aiki don bushe, damp ko jikakkun wurare. PWM-120 sanye take da aikin dimming wanda ya bambanta da aikin sake zagayowar na fitarwa, samar da babban sassauci ga LED tube aikace-aikace.

Samfurin Samfuri 

Nau'in	Matsayin IP	Aiki	Lura
Blank	IP67	3 a cikin 1 aikin dimming (0 ~ 10Vdc, 10V PWM siginar da juriya)	A hannun jari
DA	IP67	Fasaha sarrafa DALI.(na nau'in 12V/24V DA kawai)	A hannun jari
DA2	IP67	Fasahar sarrafa DALI-2.(don 12V/24V tare da nau'in DA2 kawai)	A hannun jari

BAYANI

MISALI		Saukewa: PWM-120-12	Saukewa: PWM-120-24	Saukewa: PWM-120-36	Saukewa: PWM-120-48
FITARWA	DC VOLTAGE	12V	24V	36V	48V
	KYAUTA YANZU	10 A	5A	3.4 A	2.5 A
	KYAUTA WUTA	120W	120W	122.4W	120W
	MAGANAR DIMMING	0 ~ 100%
	PWM FREQUENCY (Nau'in.)	1.47kHz don Blank/DA-Nau'in, 2.5kHz don DA2-Nau'in
	SETUP, TASHI LOKACI Lura. 2Lura. 9	500ms, 80ms/230VAC ko 115VAC
	RIKE LOKACI (Nau'i)	16ms/230VAC ko 115VAC
INPUT	VOLTAGE RANGE Lura.3	90 ~ 305VAC 127 ~ 431VDC
	YAWAITA RANAR	47 ~ 63Hz
	FACTOR WUTA (Nau'in.)	PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ cikakken kaya
	TOTAL HARMIC KARYA	THD< 20% (@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)
	INGANTATTU (Nau'i)	88.5%	90%	90%	90.5%
	AC CURRENT (Nau'i)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INGANTA KYAUTA (Nau'in.)	SANYI START 60A (kashi = 520μs da aka auna a 50% Ipeak) a 230VAC; Ta NEMA 410
	MAX. A'A. na PSUs akan 16A CIRCUIT BREAKER	Raka'a 4 (mai katsewar kewayawa na nau'in B) / raka'a 6 (mai katsewar nau'in C) a 230VAC
	LEAKAGE YANZU	<0.25mA / 277VAC
	BABU CIN WUTA/TSIRAI	Babu amfani da wutar lantarki <0.5w don nau'in blank; yawan wutar lantarki <0.5W don nau'in DA-type/DA2
KARIYA	KYAUTA	108 ~ 130% ƙididdige ƙarfin fitarwa
		Yanayin ɓarna, yana murmurewa ta atomatik bayan an cire yanayin kuskure
	TAKAITACCEN GARI	Yanayin 12V/24V da yanayin rufe 36V/48V (gami da nau'in DA/sai dai nau'in DA2) Yanayin Hiccup, yana murmurewa ta atomatik bayan an cire yanayin kuskure (kawai don nau'in DA2)
	AKAN VOLTAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Kashe o/p voltage, sake kunna wuta don murmurewa
	WUCE ZAFIN	Kashe o/p voltage, sake kunna wuta don murmurewa
Muhalli	WURIN AIKI.	Tcase = -40 ~ +90 ℃ (Da fatan za a koma zuwa sashin "OUTPUT LOAD vs TEMPERATURE")
	MAX. GASKIYAR CASE.	Tace =+90 ℃
	DANSHI MAI AIKI	20 ~ 95% RH marasa amfani
	AJIYA TEMP., DANSHI	-40 ~ +80 ℃, 10 ~ 95% RH
	GASKIYA GASKIYA	± 0.03% / ℃ (0 ~ 45 ℃, sai dai 0 ~ 40 ℃ na 12V)
	VIBRATION	10 ~ 500Hz, 5G 12min./1 sake zagayowar, lokaci na 72min. kowane tare da X, Y, Z axes
TSIRA & EMC	MATSAYIN TSIRA Lura. 5	UL8750 (nau'in "HL") (sai dai nau'in 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 62384 yarda; Zane yana nufin BS EN/EN67-15885; Dangane da BS EN/EN120-12,24-004 shafi J dace da shigarwar gaggawa (EL) (Input AC: 19510.1-19510.14Vac) (na DA60335-Nau'in kawai)
	DALI STANDARDS	IEC62386-101, 102, 207,251 don DA/DA2-Nau'i kawai, Nau'in Na'ura 6(DT6)
	KARANTA VOLTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA: 1.5KVAC
	JUMU'A KEBE	I/PO/P:100M Ohms/500VDC/25℃/ 70% RH
	Farashin EMC Lura. 6	Yarda da BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load ≧ 60%); BS EN/EN61000-3-3, GB17743 da GB17625.1, EAC TP TC 020
	EMC LAYYA	Yarda da BS EN/EN61000-4-2,3,4,5,6,8,11; TS EN 61547 Matsayin masana'antar haske (Layin rigakafi-Layin 2KV), EAC TP TC 020
WASU	Farashin MTBF	2243.7K awa min. Telcordia SR-332 (Bellcore); 228.7K awa min. MIL-HDBK-217F (25 ℃)
	GIRMA	191*63*37.5mm (L*W*H)
	CIKI	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
NOTE	Duk sigogin da BA a ambata musamman ana auna su a shigarwar 230VAC, ƙimar halin yanzu da 25℃ na yanayin zafi. Ana iya buƙatar rage ƙima a ƙarƙashin ƙaramin shigar da ƙaratage. Da fatan za a koma zuwa sassan HABIYYA TSAYE don cikakkun bayanai. Ana auna tsawon lokacin saitawa a farkon sanyi na farko. Kunna/KASHE direban na iya haifar da haɓaka lokacin saitawa. Ana ɗaukar direba a matsayin ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da cikakken shigarwa zai shafi aikin EMC, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakken shigarwa kuma. Wannan jerin ya hadu da tsawon rayuwar rayuwa na> sa'o'i 50,000 na aiki lokacin da Tcase, musamman tc point (ko TMP, a kowace DLC), kusan 75 ℃ ko ƙasa da haka. Da fatan za a koma zuwa bayanin garanti akan MEAN WELL's websaiti a http://www.meanwell.com The yanayi zazzabi derating na 3.5 ℃ / 1000m tare da fanless model da na 5 ℃ / 1000m tare da fan model ga aiki tsawo sama da 2000m (6500ft). Don kowane bayanin kula na aikace-aikacen da taka tsantsan shigar aikin tabbatar da ruwa na IP, da fatan za a duba littafin mai amfani kafin amfani. https://www.meanwell.com/Upload/PDF/LED_EN.pdf9. Dangane da IEC 62386-101 / 102 DALI ikon kan lokaci da ka'idodin katsewa, lokacin saitawa yana buƙatar gwadawa tare da mai sarrafa DALI wanda zai iya tallafawa ikon DALI akan aiki, in ba haka ba lokacin saitawa zai kasance sama da 0.5 seconds don DA type. ※ Rashin Lamuni na Samfur: Don cikakkun bayanai, da fatan za a duba https://www.meanwell.com/serviceDisclaimer.aspx

AIKIN DIMMING

DIM+ don Blank-Type DA+ don DA/DA2-type * *DIM- na Blank-Type DA- don nau'in DA/DA2

Ka'idar dimming don fitowar salon PWM

Ana samun dimming ta hanyar canza yanayin aiki na halin yanzu.

3 cikin 1 aikin dimming (na nau'in Blank)

• Aiwatar da ɗayan hanyoyin uku tsakanin DIM+ da DIM-: 0 ~ 10VDC, ko siginar PWM 10V ko juriya.
• Dimming tushen halin yanzu daga wutar lantarki: 100μA (nau'i)

Lura

1. Min. Zagayowar aikin fitarwa na yanzu shine kusan 0.15%, kuma shigarwar dimming shine kusan 6KΩ ko 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aikin 6%.
2. Zagayowar aikin fitarwa na yanzu zai iya faɗuwa zuwa 0% lokacin shigar da dimming ƙasa da 6KΩ ko ƙasa da 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aiki ƙasa da 6%.

Interface DALI (bangaren farko; na DA/DA2-Nau'i)

• Aiwatar da siginar DALI tsakanin DA+ da DA-.
• Ka'idar DALI ta ƙunshi ƙungiyoyi 16 da adireshi 64.
• An daidaita matakin farko a 0.2% na fitarwa

KYAUTA KYAUTA vs TEMPERATURE

SIFFOFIN SIFFOFI

HALAYEN WUTA (PF).

Ana buƙatar rage ƙima a ƙarƙashin ƙaramin shigar da ƙaratage.

TOTAL HARMONIC rarrabuwa (THD)

INGANTATTU vs LOAD

Jerin PWM-120 yana da ingantaccen aiki wanda har zuwa 90.5% ana iya kaiwa ga aikace-aikacen filin.

Model 48V, akwati a 80 ℃

LOKACIN RAYUWA

Tsarin zane

Ƙayyadaddun Makanikai

Nau'in Blank 

DA/DA2-Type

Ba da shawarar Hanyar Jagora

Manual shigarwa

Haɗin don nau'in Blank

Tsanaki

• Kafin fara kowane shigarwa ko aikin kulawa, da fatan za a cire haɗin wutar lantarki daga mai amfani. Tabbatar cewa ba za a iya sake haɗa shi da gangan ba!
• Ajiye iskar da ya dace a kusa da naúrar kuma kar a tara kowane abu a kai. Hakanan dole ne a kiyaye izinin 10-15 cm lokacin da na'urar da ke kusa ta kasance tushen zafi.
• Hanyoyi masu hawa ban da daidaitaccen daidaitawa ko aiki a ƙarƙashin babban zafin yanayi na iya ƙara yawan zafin jiki na ɓangaren ciki kuma zai buƙaci rage ƙima a cikin fitarwa na halin yanzu.
• Ƙimar halin yanzu na kebul na firamare/secondary da aka yarda ya kamata ya fi ko daidai da na naúrar. Da fatan za a duba ƙayyadaddun sa.
• Don direbobin LED masu haɗin haɗin ruwa, tabbatar da cewa haɗin gwiwa tsakanin naúrar da na'urar hasken wuta yana da ƙarfi ta yadda ruwa ba zai iya kutsawa cikin tsarin ba.
• Don direbobin LED masu ƙarfi, tabbatar da cewa mai sarrafa dimming ɗin ku yana da ikon tuƙi waɗannan raka'a. Jerin PWM yana buƙatar 0.15mA kowace naúrar.
• Tc max. an gano a kan alamar samfurin. Da fatan za a tabbatar cewa zafin yanayin Tc ba zai wuce iyaka ba.
• KADA KA haɗa "DIM- zuwa -V".
• Ya dace da amfani na cikin gida ko waje ba tare da hasken rana kai tsaye ba. Da fatan za a guji nutsewa cikin ruwa sama da mintuna 30.
• Ana la'akari da wutar lantarki a matsayin bangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun da aikin EMC zai shafi cikakken shigarwa, masana'antun kayan aiki na ƙarshe dole ne su cancanci EMC
• Umarni akan cikakken shigarwa kuma.

Takardu / Albarkatu

KYAU KYAU PWM-120 Series 120W Constant Voltage PWM Output LED Driver [pdf] Manual mai amfani PWM-120-12, PWM-120-24, PWM-120-36, PWM-120 Series, 120W Constant Vol.tage PWM Fitar LED Direba, PWM-120 Series 120W Constant Voltage PWM Fitar da Direban LED, Constant Voltage PWM Output LED Driver, Voltage PWM Output LED Driver, PWM Fitarwa LED Direba, Fitarwa LED Direba, LED Driver, Direba

Magana

• Manual mai amfani