PWM-120-12 Series Constant Voltage PWM Output LED Driver
“
Ƙayyadaddun bayanai:
- Samfura: PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48
- DC Voltage: 12V, 24V, 36V, 48V
- Ƙimar Yanzu: 10A, 5A, 3.4A, 2.5A
- Ƙarfin Ƙarfi: 120W (don duk samfuri)
- Rage Ragewa: 0 - 100%
- Mitar PWM: 1.47kHz don Blank/DA-Nau'in, 2.5kHz don
DA2-Nau'i - Saita, Lokacin Tashi: 500ms, 80ms
- Voltage Rage: 90 - 305VAC, 127 - 431VDC
- Matsakaicin Mitar: 47 - 63Hz
- Factor Power: PF>0.97/115VAC, PF>0.96/230VAC,
PF>0.93/277VAC @ cikakken kaya - Jimlar Harmonic Karya: THD<20%
- Yawan aiki: 88.5% - 90%
- Max. Lambobin PSUs akan 16A Mai Rarraba Wuta: Raka'a 4 (kewaye
mai karya nau'in B) / raka'a 6 (mai karya nau'in C) a
230VAC
Umarnin Amfani da samfur:
1. Shigarwa:
- Tabbatar da ikon shigar da wutar lantarki yayi daidai da kewayon shigarwar AC da aka kayyade
don samfurin ku.
- Haɗa direban LED zuwa vol da ya dacetage source da
tabbatar da ingantaccen grounding.
2. Ragewa:
- Daidaita kewayon dimming daga 0 zuwa 100% gwargwadon hasken ku
bukatun.
– Yi amfani da ƙayyadadden saitin mitar PWM don mafi kyau
yi.
3. Tsaron Wutar Lantarki:
- Bi duk ƙa'idodin aminci na lantarki masu dacewa da
dokoki lokacin shigarwa da amfani da direban LED.
- Kada ku wuce iyakar adadin PSU akan na'urar da'ira
don gujewa yin lodi fiye da kima.
FAQ:
Tambaya: Menene zan yi idan direban LED bai kunna ba?
A: Bincika haɗin wutar lantarki kuma tabbatar da cewa voltage
tushen yana cikin kewayon da aka ƙayyade.
Tambaya: Zan iya haɗa LEDs masu yawa zuwa direba ɗaya?
A: Ana ba da shawarar ku bi ƙa'idodin masana'anta akan
matsakaicin adadin LEDs waɗanda za a iya haɗa su da direba ɗaya
don tabbatar da aikin da ya dace da kuma tsawon rayuwar LEDs.
"'
120W Constant Voltage PWM Output LED Driver
PWM-120 jerin
Littafin mai amfani
2
(na DA2-Nau'i kawai)
Shigar AC: 100-240Vac (na DA2-Nau'i kawai)
IP67
Farashin 15885
THOMAS SAMUEL
THOMAS SAMUEL
05
sai dai nau'in 12DA
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
PWM-120 jerin
BAYANI
MISALI
Saukewa: PWM-120-12
Saukewa: PWM-120-24
Saukewa: PWM-120-36
Saukewa: PWM-120-48
DC VOLTAGE
12V
24V
36V
KYAUTA YANZU
10 A
5A
3.4 A
KYAUTA WUTA
120W
120W
122.4W
FITARWA
MAGANAR DIMMING
0 ~ 100%
FREQUENCY PWM (Nau'in.) 1.47kHz don Blank/DA-Nau'in, 2.5kHz don DA2-Nau'in
SETUP, TASHI LOKACI
Abin lura.2 Lura.9
500ms, 80ms/230VAC ko 115VAC
RIKE LOKACI (Nau'i) 16ms/230VAC ko 115VAC
VOLTAGE RANGE bayanin kula.3
90 ~ 305VAC 127 ~ 431VDC (Da fatan za a koma ga sashin "SATIC CHARACTIC")
MAFARKI YAWA 47 ~ 63Hz
FACTOR WUTA (Nau'in.)
PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ cikakken kaya (Da fatan za a koma zuwa sashin "WUTA FACTOR (PF) HALI")
48V 2.5A 120W
JAM'IYYAR RUDANA JARUWA
THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC)
INPUT
INGANTATTU (Nau'i)
88.5%
90%
90%
AC CURRENT (Nau'i)
1.3A / 115VAC 0.65A/230VAC 0.55A/277VAC
INRUSH YANZU (Nau'i.) SANYI FARKO 60A (twidth=520s auna a 50% Ipeak) a 230VAC; Ta NEMA 410
90.5%
MAX. A'A. na PSUs akan 16A CIRCUIT BREAKER
Raka'a 4 (mai katsewar kewayawa na nau'in B) / raka'a 6 (mai katsewar nau'in C) a 230VAC
LEAKAGE YANZU
<0.25mA / 277VAC
BABU CIN WUTA/TSIRAI
Babu amfani da wutar lantarki <0.5w don nau'in blank; yawan wutar lantarki <0.5W don nau'in DA-type/DA2
KYAUTA
108 ~ 130% rated fitarwa ikon Yanayin Hiccup, murmurewa ta atomatik bayan an cire yanayin kuskure
GAJERIN TSAREWA
AKAN VOLTAGE
Yanayin 12V/24V da yanayin rufe 36V/48V (gami da nau'in DA/sai dai nau'in DA2) Yanayin Hiccup, yana murmurewa ta atomatik bayan an cire yanayin kuskure (kawai don nau'in DA2)
15 ~ 17V
28 ~ 34V
41 ~ 46V
54 ~ 60V
Kashe o/p voltage, sake kunna wuta don murmurewa
WUCE WUYA Kashe o/p voltage, sake kunna wuta don murmurewa
WURIN AIKI.
Tcase = -40 ~ +90 (Da fatan za a koma zuwa sashin "OUTPUT LOAD vs TEMPERATURE")
MAX. GASKIYAR CASE.
Tcase=+90
MUHIMMIYA DANSHI MAI AIKI
20 ~ 95% RH marasa amfani
MATSALAR ARZIKI., DANSHI -40 ~ +80, 10 ~ 95% RH
GASKIYA GASKIYA
± 0.03% / (0 ~ 45, sai dai 0 ~ 40 don 12V)
VIBRATION
10 ~ 500Hz, 5G 12min./1 sake zagayowar, lokaci na 72min. kowane tare da X, Y, Z axes
UL8750 (nau'in "HL") (sai dai nau'in 12DA), CSA C22.2 No. 250.13-12; EN EN 61347-1 TS EN 61347-2-13
MATSAYIN TSIRA
Lura. 5
BS EN / EN62384 mai zaman kanta, IP67, BIS IS 15885 (Sashe na 2 / Sec13) (na 12,24 Blank da nau'in DA2), EAC TP TC 004, GB19510.1, GB19510.14 yarda; Zane yana nufin BS EN/EN60335-1; A cewar BS EN/EN61347-2-13
appendix J dace da shigarwar gaggawa (EL) (Input AC: 100-240Vac) (na DA2-Nau'i kawai)
DALI STANDARDS
IEC62386-101, 102, 207,251 don DA/DA2-Nau'i kawai, Nau'in Na'ura 6(DT6)
TSIRA & TSARE VolTAGEI/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
EMC
RIGAWA I/PO/P: 100M Ohms / 500VDC / 25/ 70% RH
EMC EMISSION Note.6 Immunity EMC
Yarda da BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load60%); TS EN 61000-3-3, GB/T 17743, GB17625.1; EAC TP TC 020
Yarda da BS EN/EN61000-4-2,3,4,5,6,8,11; TS EN 61547 Matsayin masana'antar haske (Layin rigakafi-Layin 2KV), EAC TP TC 020
SAURAN MTBF DIMENSION
2243.7K awa min. Telcordia SR-332 (Bellcore); 191*63*37.5mm (L*W*H)
228.7K awa min. MIL-HDBK-217F (25)
CIKI
0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
1. Duk sigogi BA a ambata musamman ana auna su a shigarwar 230VAC, ƙimar halin yanzu da 25 na yanayin zafi.
NOTE 2. Ana iya buƙatar rage ƙima a ƙarƙashin ƙaramin ƙararrakin shigarwatage. Da fatan za a koma zuwa sassan “SATAKIYYA” don cikakkun bayanai. 3. Ana auna tsawon lokacin saitawa a farkon sanyi na farko. Kunna/KASHE direban na iya haifar da ƙara lokacin saitawa.
4. Ana ɗaukar direba a matsayin wani ɓangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tunda aikin EMC zai shafi
ta cikakken shigarwa, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakken shigarwa kuma.
(kamar yadda ake samu akan https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Wannan jerin ya haɗu da yanayin rayuwa na yau da kullum na> 50,000 hours na aiki lokacin da Tcase, musamman tc point (ko TMP, da DLC), yana kusan 75 ko ƙasa.
6. Da fatan za a koma ga bayanin garanti akan MEAN RIJI website a http://www.meanwell.com 7. The yanayi zazzabi derating na 3.5/1000m tare da fanless model da na 5/1000m tare da fan model don aiki tsawo sama da 2000m(6500ft).
8. Ga kowane bayanin kula da aikace-aikacen da aikin tabbatar da ruwa na IP taka tsantsan, da fatan za a duba littafin mai amfani kafin amfani.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
9. Dangane da IEC 62386-101 / 102 DALI ikon kan lokaci da ka'idodin katsewa, lokacin saitawa yana buƙatar gwadawa tare da mai sarrafa DALI wanda zai iya tallafawa ikon DALI akan aiki, in ba haka ba lokacin saitawa zai kasance sama da 0.5 seconds don DA type.
Bayanin Haƙƙin Samfuri Don cikakken bayani, da fatan za a koma zuwa https://www.meanwell.com/serviceDisclaimer.aspx
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
AIKIN DIMMING
PWM-120 jerin
AC/L (Blue) AC/N (Blue)
PWM-120
Ƙa'idar dimming don fitowar salo na PWM Ana samun Dimming ta hanyar canza yanayin aikin fitarwa na yanzu.
Fitar da DC halin yanzu ON
Io=0A
KASHE TON
T
DIM+(Purple)* DIM-(Pink)** +V(Red)(Brown for DA-type) -V(Black)(Blue for DA-type)
* DIM+ don Blank-Type DA+ don nau'in DA/DA2
* *DIM- don Nau'in Blank DA- don nau'in DA/DA2
TON
Zagayen aiki (%) =
×100%
T
Fitar Mitar PWM: 1.47kHz don Blank/DA-Nau'in 2.5kHz don DA2-Nau'in
3 cikin 1 aikin dimming (na nau'in Blank)
Aiwatar da ɗayan hanyoyin uku tsakanin DIM+ da DIM-: 0 ~ 10VDC, ko siginar PWM 10V ko juriya. Rage tushen halin yanzu daga wutar lantarki: 100A (nau'i)
Ana amfani da ƙari 0 ~ 10VDC
+ V +
Tushen LED
-V DIM+
DIM-
–
+ Ƙara Voltage
–
"KADA KA haɗa "DIM- zuwa -V"
+ -
10%
0.15%
0.6V 1V
Zagayowar aikin fitarwa na yanzu (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V shigarwar dimming: Additive voltage
Aiwatar da ƙarin siginar PWM 10V (kewan mitar 100Hz ~ 3KHz):
+ V +
Tushen LED
-V DIM+
DIM-
Ƙara siginar PWM
"KADA KA haɗa "DIM- zuwa -V"
+ -
10% 0.15%
6% 10%
Zagayowar aikin fitarwa na yanzu (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Zagayowar aikin ƙara 10V PWM shigarwar siginar dimming
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
PWM-120 jerin
Ana amfani da juriya na ƙari:
+ V +
Tushen LED
-V DIM+
DIM-
Ƙarfafa Juriya
"KADA KA haɗa "DIM- zuwa -V"
+ -
10% 0.15%
6K/N 10K/N
Zagayowar aikin fitarwa na yanzu (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
0% Gajere
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N= Yawan Direba don daidaitawa da aiki)
Shigarwa mai raguwa: Ƙara juriya
Bayani: 1. Min. Zagayowar aikin fitarwa na yanzu shine kusan 0.15%, kuma shigarwar dimming shine kusan 6K ko 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aikin 6%. 2. Zagayowar aiki na fitarwa na yanzu zai iya faɗuwa zuwa 0% lokacin shigar da dimming ƙasa da 6K ko ƙasa da 0.6VDC, ko siginar 10V PWM tare da sake zagayowar aiki ƙasa da 6%.
Interface DALI (bangaren farko; na DA/DA2-Nau'i) Aiwatar da siginar DALI tsakanin DA+ da DA-. Ka'idar DALI ta ƙunshi ƙungiyoyi 16 da adireshi 64. An daidaita matakin farko a 0.2% na fitarwa
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
LOKACI (%)
120W PWM Fitar da Direban LED
KYAUTA KYAUTA vs TEMPERATURE
PWM-120 jerin
100
80 230VAC shigarwar kawai
60 50 40
20
12V kawai
-40-25
0
15
30
40 45 50
60
Yanayin zafin jiki, Ta ()
70 (HORIZONTAL)
LOKACI (%)
100
80 230VAC shigarwar kawai
60
40
20
-40-25 0
20
45
65
75
85
90 (HORIZONTAL)
Tcase ()
SIFFOFIN SIFFOFI
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VolTAGE (V) 60Hz De-rating ana buƙata a ƙarƙashin ƙaramin ƙaramar shigarwartage.
TOTAL HARMONIC rarrabuwa (THD)
48V Model, Tcase a 80
30%
25%
20%
277VAC
15%
230VAC
115VAC
10%
5%
0%
50%
60%
70%
80%
90%
100%
LOKACI
INGANTATTU(%)
PF
HALAYEN WUTA (PF).
Kashi na 80
1 0 0 .0 9 5 .0 9 0 0 8 .5 0 .8 0 0 .7 5 0 .7 0 0 6
10%
20%
30%
40%
50%
60%
70%
80%
90% 100% (75W)
LOKACI
277V 230V 115V
INGANTATTU vs LOAD
Jerin PWM-120 sun mallaki ingantaccen aiki wanda har zuwa 90.5% ana iya kaiwa ga aikace-aikacen filin. 48V Model, Tcase a 80
92 91 90 89 88 87 86 85 84 83 82 81 80
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V 230V 115V
LOKACI
LOAD THD (%)
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
PWM-120 jerin
LOKACIN RAYUWA
LOKACI (Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase()
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
PWM-120 jerin
Tsarin zane
EMI FILTER
I / P
&
'YAN GASKIYA
Farashin PFC
SAUYA WUTA
OTP
OLP
PWM & PFC Sarrafa
MAI GIRMA &
TACE
PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz
OLP
DIMMING CIRCUIT
ZAGIN GANO
V -V DIM+ DIM-
OVP
Ƙayyadaddun Makanikai
Nau'in Blank
Case No. PWM-120
Naúrar:mm Haƙuri:±1
300± 20
AC/L (Blue) AC/N (Blue)
50± 3 SJTW 18AWG×2C
5
191 5
63 31.5
2-4.5
T kasa tc
95.5
5
tc: max. Yanayin Yanayin
5
300± 20
UL2464 18AWG×2C SJTW 14AWG×2C 50±3
DIM+(Purple) DIM-(Pink) +V(Ja) -V(Baki)
37.5
3
DA/DA2-Type
300± 20
AC/L (Blue) AC/N (Blue)
50± 3
SWOW 17AWG×2C &H05RN-F 1.0mm2
5
191 5
63 31.5
2-4.5
T kasa tc
95.5
5
tc: max. Yanayin Yanayin
5
300±20 UL2464 18AWG×2C SWOW 17AWG×2C 50±3 &H05RN-F 1.0mm2
DA+(Purple) DA-(Pink) +V(Brown) -V(Blue)
37.5
3
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
120W PWM Fitar da Direban LED
Ba da shawarar Hanyar Jagora
Haɗin Manual ɗin shigarwa don nau'in Blank
PWM-120 jerin
AC/L (Brown) AC/N (BLUE)
DIM-(P-INK) +
DIM+(PURLE)
-V(BLACK) +
+ V (RED)
0 ~ 10Vdc ko 10V PWM ko juriya Dimmer ko DALI Dimmer
Tushen LED
Tsanaki Kafin fara kowane shigarwa ko aikin kulawa, da fatan za a cire haɗin wutar lantarki daga mai amfani. Tabbatar
cewa ba za a iya sake haɗa shi da gangan ba! Ajiye iskar da ya dace a kusa da naúrar kuma kar a tara kowane abu a kai. Har ila yau, dole ne a kiyaye izinin 10-15 cm lokacin
na'urar da ke kusa ita ce tushen zafi. Hanyoyi na hawa ban da daidaitaccen daidaitawa ko aiki a ƙarƙashin babban yanayin zafi na iya ƙara haɓakar
zafin jiki na bangaren ciki kuma zai buƙaci rage ƙima a cikin fitarwa na halin yanzu. Ƙimar halin yanzu na kebul na firamare/secondary da aka yarda ya kamata ya fi ko daidai da na naúrar. Da fatan za a koma
ga ƙayyadaddun sa. Don direbobin LED masu haɗin haɗin ruwa, tabbatar da cewa haɗin gwiwa tsakanin naúrar da na'urar hasken wuta shine
m ta yadda ruwa ba zai iya kutsawa cikin tsarin ba. Don direbobin LED masu ƙarfi, tabbatar da cewa mai sarrafa dimming ɗin ku yana da ikon tuƙin waɗannan raka'a.
suna buƙatar 0.15mA kowace raka'a. Tc max. an gano a kan alamar samfurin. Da fatan za a tabbatar cewa zafin yanayin Tc ba zai wuce iyaka ba. KADA KA haɗa "DIM- zuwa -V". Ya dace da amfani na cikin gida ko waje ba tare da hasken rana kai tsaye ba. Da fatan za a guji nutsewa cikin ruwa sama da 30
mintuna. Ana la'akari da wutar lantarki a matsayin bangaren da za a yi aiki tare da kayan aiki na ƙarshe. Tun daga EMC
cikakken shigarwa zai shafi aikin, masana'antun kayan aiki na ƙarshe dole ne su sake cancantar umarnin EMC akan cikakken shigarwa kuma.
An sauke daga Arrow.com.
File Suna: PWM-120-SPEC 2024-09-25
Takardu / Albarkatu
 |
KYAU-RIYYA PWM-120-12 Series Constant Voltage PWM Output LED Driver [pdf] Littafin Mai shi PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120-12 Series Constant Vol.tage PWM Fitar LED Direba, PWM-120-12 Series, Constant Voltage PWM Output LED Driver, Voltage PWM Output LED Driver, PWM Fitarwa LED Direba, Fitarwa LED Direba, LED Driver |