MaxLite MLVT Series MLVT24D30WCSCR ArcMax LED Troffer Umarnin Jagora
Umarnin Aiki
Gabaɗaya Bayanin Tsaro
- Don rage haɗarin mutuwa, rauni na mutum ko lalacewar dukiya daga gobara, girgiza wutar lantarki, faɗuwar sassa, yanke/shafewa, da sauran haɗari karanta duk gargaɗin da umarnin da aka haɗa tare da kuma akan akwatin ƙayyadaddun kayan aiki da duk alamun kayan aiki.
- Kafin sakawa, yin hidima, ko aiwatar da gyare-gyare na yau da kullun akan wannan kayan aikin, bi waɗannan ƙa'idodin gama gari.
- ƙwararren masani mai lasisi ya kamata ya yi shigarwa na kasuwanci, sabis da kula da hasken wuta.
- Don shigarwa na mazaunin: Idan ba ku da tabbas game da shigarwa ko kula da fitilun, tuntuɓi ƙwararren ƙwararren lantarki kuma duba lambar lantarki ta gida.
- KAR KA SHIGA KAYAN RUWANCI
- An yi nufin haɗa wannan ƙayyadaddun kayan aiki zuwa akwatin mahadar UL da aka tsara yadda ya kamata.
GARGADI:
- Hadarin Wuta - Masu jagoranci na samar da kayan aiki (wayoyin wuta) masu haɗa kayan aiki dole ne a ƙididdige mafi ƙarancin 90 ℃.
Idan babu tabbas tuntuɓi ma'aikacin lantarki. - Hadarin wuta ko girgiza wutar lantarki. shigarwa yana buƙatar sanin tsarin lantarki na luminaires.
- Hadarin Wuta/Gwargwadon Lantarki - Idan bai cancanta ba, kar a yi ƙoƙarin shigarwa. Tuntuɓi ƙwararren ma'aikacin lantarki.
- Kada a yi amfani da shi a cikin yanayin zafi mai girma.
- Ka nisanta daga yanayi mai ƙonewa da fashewa.
- Kada a rufe kayan aiki da rufin rufi ko makamancin haka.
- Kar a shigar inda kayan aiki ke kwance ko kuma kawai ana goyan bayan sashe.
- Kada ku yi tasiri ko yin matsi a kan fuskar kafa ko ta baya, saboda lalacewa na iya faruwa.
- Dole ne a shigar da wannan samfurin daidai da ƙa'idar shigarwa ta mutumin da ya saba da gini da aiki da samfurin da harzards da abin ya shafa.
- Katangar tururi dole ne ya dace da 90 ° C
HANKALI:
- Don amincin ku karanta kuma ku fahimci umarnin gaba ɗaya kafin fara shigarwa.
- Don hana lalacewar wayoyi ko lalata, kar a bijirar da wayoyi zuwa gefuna na ƙarfe ko wasu abubuwa masu kaifi.
- Kafin yin yunƙurin shigarwa, bincika lambar lantarki ta gida, kamar yadda yake tsara ƙa'idodin wayoyi don yankin ku
LABARI:
- Idan za'a canza haske (fixture) daga bangon bango, tabbatar da cewa an haɗa baƙar fata mai ba da wutar lantarki zuwa mai kunnawa. KAR KA haɗa farar samar da waya zuwa maɓalli.
- Tabbatar cewa ba a fallasa wayoyi marasa tushe a wajen masu haɗin goro.
- Kada a yi ko musanya kowane buɗaɗɗen ramuka a cikin shingen wayoyi ko kayan lantarki yayin shigar da kayan aikin.
Misalai akan littafin jagora don dalilai na shigarwa kawai.
Maiyuwa bazai zama daidai da na'urar da aka saya ba.
Samfura:
Wannan jagorar koyarwa ta shafi jerin ArcMax (MLVT).
Hade a cikin akwatin:
- LED Troffer Fixture
- Umarni
Na'urorin haɗi sayar daban:
- Kit ɗin Flange: ML14G4FK/ML22G4FK/ML24G4FK
- Surface Dutsen Kit: MLVT14SMK/MLVT22SMK/MLVT24SMK
- Kebul Kit: MLG4CHK/ML2G4CHK
Saita Yanayin Launi & Wattage
Lura: Ana amfani da samfuran da ke ƙarewa a WCS. Ana jigilar samfura a mafi ƙarancin wattage a 4000K ta tsohuwa.
Saitunan launi:
- Hagu, yana tsaye akan 3500K;
- Tsakiya, yana tsaye ga 4000K;
- Dama, yana tsaye akan 5000K;
Watatage settings:
- Hagu, yana tsaye ga Ƙananan;
- Tsakiya, yana tsaye ga Matsakaici;
- Dama, yana tsaye ga High;
Launuka Zaɓi Samfura - Saita Zazzabi Launi
Lura: Ana amfani da samfuran da ke ƙarewa a cikin CS. Watatagbabu canji.
Saitunan launi:
- Hagu, yana tsaye akan 3500K;
- Tsakiya, yana tsaye ga 4000K;
- Dama, yana tsaye akan 5000K;
Daidaitaccen Umarnin Shigarwa
- Cire tayal ɗin rufi na asali don troffer.
- Sake dunƙule cikin murfin baya na direba tare da screw driver.
Yin amfani da screw driver (lebur) shiga cikin tsagi na rectangular akan ƙwanƙwasawa. Ja a gefen dama ko hagu har sai an kashe ƙwanƙwasawa yana ba ku damar ci gaba da haɗin haɗin waya.
- Yi amfani da zane na wayoyi masu zuwa.
Tabbatar cewa haɗin yana da aminci kuma mai ƙarfi. Bayan an duba wutar lantarki, shigar da dunƙule baya zuwa allon murfin baya tare da screw driver. Ƙarfafa wutar lantarki.
- Daidaitaccen wurin da ya dace a mashaya T.
Daidaitaccen Tsarin Waya
Lura: A bar ruwan lemu a rufe.
Lura: Dimming wayoyi zuwa 0-10V IEC Concomliant Control.
Umarnin shigar Model Sensor Model
- Yi amfani da screw driver don buɗe akwatin junction kuma cire ƙwanƙwasawa da ake so.
- Ciyar da waya mai kawowa ta akwatin junction.
- Haɗa hasken wuta zuwa wuta ta amfani da zanen waya na sama. Haɗa zafi zuwa baƙar fata waya, haɗa na kowa/tsakiyar waya zuwa farin tsaka tsaki waya, da kuma haɗa kore waya zuwa ƙasa.
Umarnin Shigar Model Ajiyayyen Gaggawa
- Yi amfani da screw driver don buɗe akwatin junction kuma cire ƙwanƙwasawa da ake so.
- Ciyar da wayoyi masu samar da wutar lantarki ta hanyar ƙwanƙwasa da ake so na akwatin haɗin gwiwa.
Shigar da Dutsen Surface (An sayar da shi daban)
Ana siyar da kayan ɗorawa na sama daban:
- Saukewa: MLVT14SMK
- Saukewa: MLVT22SMK
- Saukewa: MLVT24SMK
(Ba don amfani akan samfuran EM ba)
- Gyara A1/A2/B1/B2 ta skru, sanya shi cikakken firam. Sake sukurori a B1 yayin da za su shigo ciki mataki 3.
- Gyara firam a rufin
- Cire B1 kuma saukar da firam guda ɗaya.
- Tura fitilar sama cikin firam ɗin ba tare da matsala ba
- Ƙara dunƙule a B1.
- An gama shigarwa.
Dutsen Surface & Shigar da Kebul (An sayar da shi daban)
Ana sayar da kayan kebul daban:
- Saukewa: MLG4CHK
- Saukewa: ML2G4CHK
- Hana ramuka biyu a cikin rufin kuma sanya anka cikin rami. Na gaba, saka igiyar waya da dunƙule.
- A ɗaure igiyar waya zuwa rufi.
- Tura fitilar sama cikin firam ɗin ba tare da matsala ba
- Ƙara dunƙule a B1
- Ɗauki ramukan firam ɗin huɗu tare da ƙugiya huɗu na igiyar waya.
- An gama shigarwa.
Girman Flange
Ana sayar da Flange daban:
- Saukewa: ML14G4FK
- Saukewa: ML22G4FK
- Saukewa: ML24G4FK
The Recess Troffer Flange Mounting Kit an tsara shi don shigarwa na hutu a aikace-aikacen rufin bangon bushewa.
Girma
|
Abu # |
Girman Kit ɗin Flange Bayan Taro (inci) | Girman Yanke Rufe (inci) | ||||||
| A (Nisa) | B (Nisa) | C (Nisa) | D (Tsawon) | E (Tsawon) | F (Tsawon) | A+1/4"
(Nisa) |
D+1/4"
(Tsawon) |
|
| Saukewa: ML14G4FK | 12.84” | 13.5” | 11.35” | 48.66” | 49.36” | 47.2” | 13.09” | 48.91” |
| Saukewa: ML22G4FK | 24.65” | 25.31” | 23.16” | 24.65” | 25.3” | 23.1” | 24.90” | 24.90” |
| Saukewa: ML24G4FK | 24.65” | 25.31” | 23.16” | 48.66” | 49.36” | 47.2” | 24.90” | 48.91” |
Umarnin Shigarwa
- Don shigarwa a cikin rufin filasta, yanke buɗewa na girman da ya dace, sa'an nan kuma haɗa hasken panel zuwa layin wutar lantarki mai shigowa.
- Juya hasken panel da digiri 45.
- Wuce panel ta cikin rufin rufi.
- Kwanta a cikin hasken panel a kan rufi ko grid.
Tallafin Waya
Shirye-shiryen Shirye-shiryen Sarrafa (CR) Madaidaicin Tsarin Waya
Gargadi
Hadarin wuta ko girgiza wutar lantarki, shigarwa yana buƙatar sanin tsarin hasken wutar lantarki. Idan bai cancanta ba, kar a yi ƙoƙarin shigarwa kuma tuntuɓi ƙwararren ma'aikacin lantarki.
Lura: A bar ruwan lemu a rufe
Shirye-shiryen Sarrafa (CR) Model Daisy-Chained Wiring Figure
Lura: A bar ruwan lemu a rufe
- Cire Dim+ da Dim- daga ma'ajin USB-C daga Ma'aunin Yara don haɗawa zuwa Dim+, Dimof na mahaifa.
- Makullin USB-C ba zai ƙara yin aiki a kan Ma'aunin Yara-Fixtures ba.
- Babu ƙari fiye da na'urori 8 gabaɗaya lokacin sarƙar daisy.
Umarnin Shigar node c-Max™ (An zartar kawai akan samfuran CR)
- Cire matosai na silicone daga ma'aunin USB-C da ramin dunƙulewa (duba hoto na 1).
- Toshe c-Max™ cikin ma'ajin USB-C ta hanyar haɗin USB (duba hoto na 2).
- Aminta kullin c-Max™ a wurin ta hanyar ɗaure madanni na maɓallin M3 da aka haɗa tare da maɓallin Hex (Allen) (ba a haɗa shi ba). Da zarar an kulla dunƙule, rufe shi da hular siliki da aka haɗa (duba siffa 3 - zane don zane kawai, ainihin dunƙule na iya bambanta.)
Lura: Domin samples gami da dunƙule hex, yi amfani da maɓallin Allen 2.5mm ko SAE daidai 3/32.
Lura: A cikin ƙirar firikwensin motsi, ma'aunin USB-C idan akwai ba zai ƙara yin aiki ba.
Bayanin Garanti
Bayanin Garanti
Garanti na shekara 10 tare da izinin aiki*
(duba sharuddan a www.maxlite.com/warranties)
- Ƙayyadaddun Garanti: Dole ne a ƙididdige samfur don aikace-aikace ta Taskar Bayanan Samfur (PDS); aiki ≤16 hours.; a yanayin zafi -4°F zuwa 77°F.
- Har zuwa $25 / raka'a; rajista ake bukata. Ana iya samun ƙarin ɗaukar hoto don siye; tuntuɓi Max Lite.
- Ban da nau'ikan EM/MS; garantin bangaren ya shafi.
- Idan yanayin yanayi ya faɗi a waje da -4°F zuwa 77°F; samfurin yana da garantin shekaru 5 bisa ga kewayon zafin aiki da aka ƙayyade akan PDS
Iyakance Alhaki
Garantin da ya gabata na keɓantacce ne, KUMA SHINE MAGANI KADAI GA KOWANE DA DUKAN DA'AWA, KO A KAN DANGILAI, A CIKIN GASKIYA KO SAI WANDA YA FARUWA DAGA RASHIN KYAUTATA KUMA YANA MATSAYIN DUKKAN WASU GARANTI, BAYANI KO RA'AYIN DA AKE NUFI, MATSALAR GA MUSAMMAN MANUFAR, WANDA AKA IYA KASANCEWAR GARANTIN NAN GA INDA DOKA TA YARDA, KUMA, A KOWANE FARUWA, ZA'A IYA IYAKA GA WAƊANDA GARANTI DA AKA KAMMANCE A Sama. ALHAKIN MAXLITE ZAI IYA IYA IYA KAN SHARURUDAN WARRANAR KIYAYYA DA AKA SHIGA ANAN. BABU ABUBUWAN DA MAXLITE ZAI IYA DOKA GA DUK WANI LALACEWAR MUSAMMAN, MAFARKI KO SAKAMAKONSU, BA TARE DA IYAKA ba, ILLAR DA AKE SAMUN RASHIN AMFANI, RIBA, KASUWANCI KO KYAU, RASHIN CIN ARZIKI, RASHIN CIN ARZIKI, RASHIN CIN ARZIKI. UT NA LAMP, DA/KO RAGEWA A CIKIN LAMPHANYAR YI, KO MAXLITE ANA SHAWARAR YIWUWAR HAKA. BABU WANI ABUBUWAN DA ZA SU WUCE HUKUNCIN MAXLITE GABA DAYA NA KYAKKYAWAR KYAUTATAWA FARASHIN SIYAYYA. SAURARA GARANTI DA AKE BUKATAR A KAN WADANNAN SHARI'A DA SHARUDI BA SU TABBATAR DA AIKIN KYAUTATA BA; MAXLITE BA ZAI IYA HANNU GA ILLAR DA AKE YIWA KOWANE JINKIRI MAI SHAFE SAIDAR WARRANTY.
Wannan Garanti mai iyaka yana ba ku takamaiman haƙƙoƙin doka kuma kuna iya samun wasu haƙƙoƙi waɗanda ƙila su bambanta daga jiha zuwa jiha. Saboda wasu jihohi ko hukunce-hukuncen ba sa ba da izinin keɓancewa ko iyakance abin alhaki don lahani mai lalacewa ko na kwatsam, wannan iyakancewar na iya yin amfani da ku.
Takardu / Albarkatu
 |
MaxLite MLVT Series MLVT24D30WCSCR ArcMax LED Troffer [pdf] Jagoran Jagora Jerin MLVT, MLVT24D30WCSCR, ArcMax LED Troffer, MLVT Series MLVT24D30WCSCR ArcMax LED Troffer |
