VIVO Universal Soundbar TV Mount

Product Information

SKU: MOUNT-SPSB2

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product: https://vivo-us.com/products/mount-spsb2

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

✉️ help@vivo-us.com

? www.vivo-us.com [Chat live with an agent!]

? 309-278-5303

Safety Warnings

⚠️ WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. VIVO cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

⚠️ WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Package Contents

A (x2) Long Arm

B (x2) Short Arm

C (x4) M6x10

D (x4) Nyloc Nut

E (x2) M4x14

F (x2) M5x14

G (x2) M6x14

H (x2) D5 Washer

I (x2) M6x14

J (x2) M6 Nut

K (x4) M6x14

L (x4) M6x20

M (x4) M8x20

N (x4) M6x30

O (x4) M8x30

P (x8) Spacer

Q (x4) Spacer

R (x2) Washer

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

TOOLS NEEDED:

? Phillips Screwdriver

DO NOT EXCEED WEIGHT CAPACITY.

33lbs (14.97kg)

Failure to do so may result in serious injury.

Assembly Steps

STEP 1: Attaching Arms to Soundbar and TV

1A-1: Install long arms (A) to the soundbar. For small M4 or M5 threaded holes, use screws (E or F) and washers (H). For larger M6 threaded holes, use screws (G) without washers. For wall hanging slot holes, insert flat side bolts (I) fully into slots, position square holes in arms over bolts, and tighten with nuts (J).

Diagram Description: Shows screws E/F with washer H, and screws G, bolts I, and nuts J being used to attach arms to a soundbar.

With the TV face-down on a table, position the soundbar against the edge of the TV and align the arms with the lower VESA mounting holes in the TV.

Diagram Description: Shows a soundbar positioned against the back of a TV, with arms aligned to the VESA mounting points.

1A-2: Assemble the soundbar with the MOUNT-SPSB2 adapter and VESA brackets from your TV mount to the TV. Use one of the five following methods, depending on your TV's requirements. The adapter should be mounted between the TV and the VESA brackets.

Diagram Description: Shows the adapter and VESA brackets being attached to the TV, with numbered attachment points.

STEP 1 (Continued): Mounting Options

The following options detail how to attach the soundbar assembly to the TV using various hardware configurations.

OPTION 1:

For top two holes, use spacers (P) between TV and brackets, and secure with screws (K). For lower two holes, secure VESA brackets and adapter using screws (K).

Diagram Description: Illustrates using spacers (P) and screws (K) for the top attachment points and screws (K) for the lower points.

OPTION 2:

For top two holes, use spacers (P, R) between TV and VESA brackets, and secure with screws (L,M). For lower two holes, use spacer (P) and secure VESA brackets and adapter using screws (L or M).

Diagram Description: Shows using spacers (P, R) and screws (L,M) for the top, and spacer (P) with screws (L or M) for the lower points.

OPTION 3:

For top two holes, use spacers (P, R) between TV and VESA brackets, and secure with screws (L or M). For lower two holes, use spacers (P) and secure VESA brackets and adapter using screws (L or M).

Diagram Description: Similar to Option 2, detailing the use of spacers (P, R) and screws (L or M) for the top, and spacers (P) with screws (L or M) for the lower points.

OPTION 4:

For top two holes, use spacers (Q and R) between TV and VESA brackets, and secure with screws (N or O). For lower two holes, use spacers (Q) and secure VESA brackets and adapter using screws (N or O).

Diagram Description: Illustrates using spacers (Q, R) and screws (N or O) for the top, and spacers (Q) with screws (N or O) for the lower points.

OPTION 5:

For top two holes, use spacers (P, Q, and R) between TV and VESA brackets, and secure with screws (N or O). For lower two holes, use spacers (P and Q) and secure VESA brackets and adapter using screws (N or O).

Diagram Description: Shows using spacers (P, Q, R) and screws (N or O) for the top, and spacers (P, Q) with screws (N or O) for the lower points.

The soundbar and TV are now assembled together, and are ready to be mounted.

STEP 2: Mount to TV Mount

Install TV and soundbar to the TV mount.

Diagram Description: Shows the assembled TV and soundbar being attached to a wall-mounted TV bracket.

STEP 3: Final Check

Your TV and soundbar are now ready to use.

Support and Contact Information

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Last Updated: 03/05/2020

VIVO's dedicated support team is available Monday - Friday, 7:00am - 7:00pm CST, to offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact VIVO. They are happy to replace parts to ensure you have a fully functioning product.

Contact Methods:

• Email: help@vivo-us.com
• Website/Chat: www.vivo-us.com (Chat live with an agent!)
• Phone: 309-278-5303

Support Performance Metrics (within office hours):

• Average Response Time: 1HR 8M (23% within < 15m, 38% within < 30m, 61% within < 1hr, 83% within < 2hr, 92% within < 3hr)
• Average Resolution Time: < 15 M
• Average Resolution Time: 5M 4S

For more VIVO products, check out our website at: www.vivo-us.com