LUMITEC LUM-101609 Pico C4 Fadada Module
KYAUTA TAMFURI
Umarnin Aiki da Shigarwa
Canjin Canjin Analog:
Ana iya sarrafa PICO ta kowane SPST (misali jujjuya ko rocker). Ana iya aika umarni zuwa tsarin PICO tare da taƙaitaccen kashewa/kan kunna wutar shigarwa. Lokacin da aka fara ƙarfafawa, ƙirar za ta haskaka nauyin da aka haɗa zuwa fari da ramp sama cikin haske sama da tsawon daƙiƙa 3. Don zaɓar haske, ramp up za a iya katse da kulle-a kowane lokaci tare da guda juyi. Sake kunnawa don canzawa zuwa yanayin SPECTRUM inda hasken zai zagaya ta hanyar cakuɗen dukkan launuka masu samuwa a cikin daƙiƙa 20. Juya a kowane lokaci don shigar da r na daƙiƙa 3amp sama cikin haske don launi na yanzu. Kamar farkon farawa, haske ramp Ana iya katsewa sama a kowane lokaci don zaɓar da kulle-a cikin matakin haske. Barin kashe wuta sama da daƙiƙa 4 zai sake saita tsarin.
PLI (MAGANIN LAYIN WUTA)
Ana iya aika umarni na dijital ta hanyar tsarin PICO ta amfani da ka'idar PLI ta Lumitec - don saita launi da haske nan take. Ana iya amfani da Lumitec POCO da na'urar dubawa masu jituwa (misali MFD, wayar hannu, kwamfutar hannu, da sauransu) don ba da umarnin PLI ga tsarin. Don ƙarin bayani kan tsarin POCO, ziyarci: lumiteclighting.com/poco-quick-start
lumineclighting.com
Takardu / Albarkatu
 |
LUMITEC LUM-101609 Pico C4 Fadada Module [pdf] Jagoran Shigarwa LUM-101609, Pico C4 Fadada Module |
