T-PicoC3
Jagorar Mai Amfani
Shafin 1.1
Haƙƙin mallaka © 2022
Game da Wannan Jagorar
An yi niyya wannan takaddar don taimaka wa masu amfani su kafa ainihin yanayin haɓaka software don haɓaka aikace-aikacen ta amfani da kayan aiki bisa tushen T-PicoC3.
Ta hanyar sauki example, wannan takarda yana kwatanta yadda ake amfani da shi Arduino, gami da mayen daidaitawar menu na tushen, yana haɗawa Arduino kuma zazzage firmware zuwa tsarin ESP32.
Bayanan Saki
| Kwanan wata | Sigar | Bayanan sanarwa |
| 2022.07 | V1.1 | Sakin farko. |
1. Gabatarwa
1.1. T-PicoC3
T-PicoC3 kwamitin ci gaba ne. Yana iya aiki da kansa.
Ya ƙunshi ESP32-C3 MCU mai goyan bayan Wi-Fi + BLE sadarwa yarjejeniya da RP2040 MCU. Kuma wannan samfurin yana da allon LCD. Bayanin allo shine 1.14-inch ST7789V IPS LCD.
Don aikace-aikacen da ke jere daga cibiyoyin sadarwar firikwensin ƙananan ƙarfi zuwa ayyuka masu buƙata.
A ainihin wannan ƙirar shine guntu ESP32-C3.
ESP32-C3 yana haɗa Wi-Fi (band 2.4 GHz) da mafita na Bluetooth 5.0 akan guntu guda ɗaya, tare da manyan kayan aikin dual da sauran na'urori masu yawa. Ƙaddamar da fasahar 40 nm, ESP32 yana ba da ƙaƙƙarfan dandamali mai mahimmanci don saduwa da ci gaba da buƙatu don ingantaccen amfani da wutar lantarki, ƙirar ƙira, tsaro.
Xinyuan yana ba da kayan masarufi na asali da kayan masarufi waɗanda ke ba masu haɓaka aikace-aikacen damar gina ra'ayoyinsu a kusa da jerin kayan aikin ESP32-C3. Tsarin ci gaban software wanda Xinyuan ya samar an yi niyya ne don haɓaka aikace-aikacen Intanet-na abubuwa (IoT) cikin sauri, tare da Wi-Fi, Bluetooth, sarrafa wutar lantarki da sauran fasalulluka na tsarin ci gaba.
1.2. Arduino
Saitin aikace-aikacen giciye da aka rubuta a cikin Java. Arduino Software IDE an samo shi ne daga yaren sarrafa shirye-shirye da kuma yanayin ci gaba na shirin Wiring. Masu amfani za su iya haɓaka aikace-aikace a cikin Windows/Linux/MacOS bisa ga Arduino. Ana ba da shawarar amfani da Windows 10. An yi amfani da Windows OS azaman tsohonample a cikin wannan takarda don dalilai na kwatanta.
1.3. Shiri
Don haɓaka aikace-aikacen ESP32-C3 kuna buƙatar:
- An ɗora Kwamfuta tare da ko dai Windows, Linux ko Mac tsarin aiki
- Kayan aiki don gina Aikace-aikacen don ESP32-C3
- Arduino wanda ainihin ya ƙunshi API don ESP32 da rubutun don sarrafa kayan aiki
- Kwamitin ESP32-C3 kanta da kebul na USB don haɗa shi zuwa PC
2. Farawa
2.1. Zazzage Arduino Software
Mafi sauri yadda ake shigar da Arduino Software (IDE) akan injin Windows
2.1.1. Jagoran Fara Mai Sauri
The webrukunin yanar gizon yana ba da koyaswar farawa mai sauri
- Windows:
https://www.arduino.cc/en/Guide/Windows
- Linux:
https://www.arduino.cc/en/Guide/Linux
- Mac OS X:
https://www.arduino.cc/en/Guide/MacOSX
2.1.2. Matakan shigarwa don dandalin Windows Arduino
Shigar da dubawar zazzagewa, zaɓi Mai saka Windows don shigar kai tsaye
2.2. Shigar da Arduino Software
Jira shigarwa
3. Sanya
3.1. Zazzage Git
Zazzage fakitin shigarwa Git.exe
3.2. Tsari kafin ginawa
Danna alamar Arduino, sannan danna dama kuma zaɓi "babban fayil inda"
Zaɓi hardware ->
Mouse ** Danna dama ** ->
Danna Git Bash Anan
3.3. Rufe wurin ajiya mai nisa
$ mkdir espressif
$ cd espressif
$ git clone-mai maimaitawa https://github.com/espressif/arduino-esp32.git esp32
4. Haɗa
Kusan kuna nan. Don samun damar ci gaba, haɗa allon ESP32-C3 zuwa PC, duba ƙarƙashin abin da tashar tashar jiragen ruwa ke bayyane da kuma tabbatar da ko sadarwar serial tana aiki.
5. Gwajin Demo
Zaɓi File>> Example>>WiFi>>WiFiScan
6. Zazzage Sketch
6.1. Zaɓi Board
Kayan aiki<
6.2. Loda
Zane << Upload
6.2. Serial Monitor
Kayan aikin << Serial Monitor
7. Maganar Umurnin SSC
Anan ya lissafa wasu umarni na Wi-Fi gama gari don gwada tsarin.
7.1. op
Bayani
Ana amfani da op umarni don saitawa da bincika yanayin Wi-Fi na tsarin.
Example
ku -Q
op -S -o wmode
Siga
Table 6-1. op Kwamandan Kwamandan
| Siga | Bayani |
| -Q | Neman yanayin Wi-Fi. |
| -S | Saita yanayin Wi-Fi. |
| wmode | Akwai hanyoyin Wi-Fi guda 3:
|
7.2. sta
Bayani
Ana amfani da umarnin sta don bincika mahaɗin cibiyar sadarwar STA, haɗa ko cire haɗin AP, da tambayar matsayin haɗin haɗin cibiyar sadarwar STA.
Example
sta -S [-s ssid] [-b bssid] [-n tashar] [-h] sta -Q
sta -C [-s ssid] [-p kalmar sirri] sta -D
Siga
Table 6-2. sta Command Parameter
| Siga | Bayani |
| - S scan | Duba wuraren samun dama. |
| - ssd | Duba ko haɗa wuraren shiga tare da ssid. |
| - b ruwa | Duba wuraren Samun shiga tare da bssid. |
| -n channel | Duba tashar. |
| -h | Nuna sakamakon binciken tare da ɓoye wuraren samun damar ssid. |
| -Q | Nuna STA haɗin stutus. |
| -D | An cire haɗin tare da wuraren shiga na yanzu. |
7.3. ap
Bayani
Ana amfani da umarnin ap don saita siga na cibiyar sadarwar AP.
Example
ap -S [-s ssid] [-p kalmar sirri] [-t encrypt] [-n tashar] [-h] [-m max_sta] ap -Q
abin - L
Siga
Table 6-3. apk Parameter
| Siga | Bayani |
| -S | Saita yanayin AP. |
| - ssd | Saita AP ssid. |
| -p kalmar sirri | Saita kalmar wucewa ta AP. |
| -t encrypt | Saita yanayin ɓoyayyen AP. |
| -h | Ɓoye ssid. |
| -m max_sta | Saita haɗin haɗin AP max. |
| -Q | Nuna sigogin AP. |
| -L | Nuna Adireshin MAC da Adireshin IP na tashar da aka haɗa. |
7.4. mac
Bayani
Ana amfani da umarnin mac don bincika adireshin MAC na cibiyar sadarwa.
Example
mac -Q [-o yanayin]
Siga
Table 6-4. mac Command Parameter
| Siga | Bayani |
| -Q | Nuna adireshin MAC. |
| - yanayin |
|
7.5. dcp ku
Bayani
Ana amfani da umarnin dhcp don kunna ko kashe sabar dhcp/abokin ciniki.
Example
dchp -S [-o yanayin] dhcp -E [-o yanayin] dhcp -Q [-o yanayin]
Siga
Table 6-5. dhcp Command Parameter
| Siga | Bayani |
| -S | Fara DHCP (Abokin ciniki/Sabis). |
| -E | Ƙarshen DHCP (Abokin ciniki/Sabis). |
| -Q | nuna hali DHCP. |
| - yanayin |
|
7.6. ip
Bayani
Ana amfani da umarnin ip don saitawa da bincika adireshin IP na cibiyar sadarwa.
Example
ip -Q [-o yanayin] ip -S [-i ip] [-o yanayin] [-m mask] [-g ƙofar]
Siga
Table 6-6. ip Command Parameter
| Siga | Bayani |
| -Q | Nuna adireshin IP. |
| - yanayin |
|
| -S | Saita adireshin IP. |
| - ina ip | Adireshin IP. |
| - m mask | Mashin adireshin subnet. |
| - g kofa | Ƙofar tsoho. |
7.7. sake yi
Bayani
Ana amfani da umarnin sake yi don sake kunna allo.
Example
sake yi
7.8. rago
Ana amfani da umarnin ram don tambayar girman sauran tulin da ke cikin tsarin.
Example
rago
Xinyuan 2022.07
FCC Tsanaki:
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
MUHIMMAN NOTE:
Lura: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
-Sake daidaitawa ko sake matsugunin eriyar karɓa.
-Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
-Haɗa kayan aiki zuwa wani maɓalli a kan wata da'ira daban-daban da wanda aka haɗa mai karɓa zuwa gare ta.
— Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Bayanin Bayyanar Radiation na FCC:
Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo da jikin ku.
Takardu / Albarkatu
 |
LILYGO T-PICOC3 Yana Haɗa RP2040 da ESP32 a cikin Guda Guda [pdf] Jagorar mai amfani T-PICOC3, TPICOC3, 2ASYE-T-PICOC3, 2ASYETPICOC3, T-PICOC3 Haɗa RP2040 da ESP32 a cikin Guda Guda, Haɗa RP2040 da ESP32 a cikin Guda Guda, ESP32 a cikin Guda Guda, Guda ɗaya, Board |
