HADIN KAI
MASHBAY
ARGB MIDI TOWER CASE
MANHAJAR MAI AMFANI
ABUN DA AKE SOYAYYA
CUTAR PANEL
CUTAR PANEL
- Ƙungiyar Hagu – Cire babban yatsan yatsan yatsa biyu kuma zame jikin gilashin baya.
- Ƙungiyar Dama - Cire babban yatsan yatsa biyu kuma zamewa.
- Panel na gaba - Nemo yanke ƙasa, daidaita chassis da hannu ɗaya, kuma a cire daga yanke da ɗan ƙarfi har sai an fitar da shirye-shiryen bidiyo.
FASSARAR DARIYA
FASSARAR DARIYA
- Daidaita motherboard ɗinku tare da chassis don gano inda yakamata a shigar da abubuwan tsayawa.
Da zarar an gama, cire motherboard ɗin kuma ɗaure tsayawa daidai daidai. - Saka farantin I/O na mahaifar ku a cikin abin da aka yanke a bayan harka.
- Sanya mahaifar ku a cikin chassis, tabbatar da cewa tashoshin baya sun dace cikin farantin I/O.
- Yi amfani da screws ɗin da aka bayar don haɗa motherboard ɗin ku zuwa chassis.
SHIGA WUTA
SHIGA WUTA
- Sanya PSU a baya na karar, a cikin PSU shroud.
- Daidaita ramukan kuma kiyaye tare da sukurori.
KATIN KYAUTA/CIYAR KAtin PCI-E
KATUN VIDIYO/SAFIYAR KAtin PCI-E
- Cire murfin PCI-E na baya kamar yadda ya cancanta (ya danganta da girman ramin katin ku)
- Sanya a hankali kuma zame katin PCI-E ɗinku a wuri, sannan amintattu tare da kawo sukurori na katin ƙara.
- Idan yana hawa a tsaye, cire murfin PCI-E na verbcal kuma haɗa kebul mai tashi zuwa katin (sayar da shi daban) kafin a kiyaye tare da skru na katin ƙara.
3.5 ″ HDD SHIGA
3.5 ″ HDD SHIGA
- Sanya 35 ″ HDD nto/0n a saman madaidaicin HDD kuma dunƙule ciki idan an buƙata.
2.5 ″ SSD INSTALLATION (REAR)
2.5 ″ SSD INSTALLATION
- Cire madaidaicin daga rea o farantin motherboard haɗa hive 257 sannan ku koma wurin.
- Sanya 25 HOD/SSD nto/o t9p f na HOD da kuma dunƙule inf requirc,
KYAUTA FAN INSTALLATION
KYAUTA FAN INSTALLATION
- Cire abin ƙura daga saman akwati.
- Daidaita fan (s) na srew holeson tp o chassis kuma aminta da sukurori.
- Maimaita ƙurar ku da zarar an amintu
SHIGA FAN GABA/GAYE/BAYAN
SHIGA FAN GABA/GAYE/BAYAN
- Daidaita ramukan dunƙulewa a kan chass kuma aminta da sukurori.
SANIN RUWA RADIATOR
SANIN RUWA RADIATOR
- Kiyaye magoya bayanta ta radiator, sannan asten aditor a cikin chassis ta hanyar Amincewa da sukurori a waje.
I/0 PANEL SHIGA
I/0 PANEL SHIGA
- A hankali bincika lakabin kowane mai haɗawa daga rukunin I/O don gano aikinsu.
- Ketare tunani tare da littafin uwa na uwa don gano inda ya kamata a sanya kowace waya, sannan a kiyaye daya bayan daya. Da fatan za a tabbatar an shigar da su a daidai polarity don guje wa rashin aiki ko lalacewa.
Pro Gamersware GmbH
GauBstraBe 1, 10589 Berlin, Deutschland
info@gamersware.com
+49 (0) 30 83797272
www.kolink.eu | support@kolink.eu
Alamar WEEE tana nuna cewa ba dole ba ne a zubar da wannan samfurin tare da sharar gida na yau da kullun. Ta hanyar daidaitaccen zubar da wannan samfurin, zaku taimaka kare muhalli. Don ƙarin bayani kan zubar da wannan samfur, tuntuɓi gundumar ku, sabis ɗin zubar da shara ko shagon da kuka sayi samfurin.
Takardu / Albarkatu
 |
KOLINK Unity Meshbay ARGB MIDI Tower Case [pdf] Manual mai amfani Unity Meshbay ARGB MIDI Tower Case, Haɗin kai, Meshbay ARGB MIDI Tower Case, ARGB MIDI Tower Case, MIDI Tower Case, Hasumiyar Case, Case |