KOLINK NNITY Lateral Performance MIDI Tower Case
ABUN DA AKE SOYAYYA
UMARNIN SHIGA
CUTAR PANEL
- Ƙungiyar Hagu - Buɗe ƙofar gabaɗaya ta amfani da abin da aka makala kuma cire hinges.
- Ƙungiyar Dama - Cire babban yatsan yatsa biyu kuma zamewa.
- Panel na gaba - Nemo yanke ƙasa, daidaita chassis da hannu ɗaya, kuma a cire daga yanke da ɗan ƙarfi har sai an fitar da shirye-shiryen bidiyo.
FASSARAR DARIYA
- Daidaita motherboard ɗinku tare da chassis don gano inda yakamata a shigar da abubuwan tsayawa.
- Da zarar an gama, cire motherboard ɗin kuma ɗaure tsayawa daidai daidai.
- Saka farantin I/O na mahaifar ku a cikin abin da aka yanke a bayan harka.
- Sanya mahaifar ku a cikin chassis, tabbatar da cewa tashoshin baya sun dace cikin farantin l/O.
- Yi amfani da screws ɗin da aka bayar don haɗa motherboard ɗin ku zuwa chassis.
SHIGA WUTA
- Sanya PSU a baya na karar, a cikin PSU shroud.
- Daidaita ramukan kuma kiyaye tare da sukurori.
KATIN KYAUTA/CIYAR KAtin PCI-E
KATUN VIDIYO/SAFIYAR KAtin PCI-E
- Cire murfin PCI-E na baya kamar yadda ya cancanta (ya danganta da girman ramin katin ku)
- Sanya a hankali kuma zame katin PCI-E ɗinku a wuri, sannan amintattu tare da kawo sukurori na katin ƙara.
- Idan yana hawa a tsaye, haɗa madaidaicin sashin GPU na tsaye zuwa yankin ramin PCI-E, kiyaye kebul ɗin hawan PCI-E zuwa gareta (wanda aka sayar daban) kuma haɗa kebul ɗin zuwa uwayen uwa. Sanya katin PCI-E ɗinku a hankali, haɗe zuwa ramukan PCI-E na baya kuma amintacce tare da abubuwan ƙarawa da aka kawo.
3.5 ″ HDD SHIGA
- Sanya 3.5 Ho D intovon shima na kasuwancin H0o kuma ku dunƙule idan an buƙata.
2.5 ″ SSD INSTALLATION (REAR)
KYAUTA FAN INSTALLATION
- Cire tacewa kura daga saman akwati.
- Daidaita magoya bayan ku) zuwa ramukan dunƙule a saman chassis kuma amintattu da sukurori.
- Sauya tacewar ku da zarar an amintu.
FAN GABA / BAYAN SHIGA
- Daidaita fan ɗin ku zuwa ramukan dunƙule akan chassis kuma aminta da sukurori.
SANIN RUWA RADIATOR
- Amince magoya baya ga radiator, sa'an nan kuma ɗaure radiator a cikin chassis ta hanyar kulla da sukurori daga waje.
I/O PANEL SHIGA
- A hankali bincika lakabin kowane mai haɗawa daga rukunin I/O don gano aikinsu.
- Ketare tunani tare da littafin uwa na uwa don gano inda ya kamata a sanya kowace waya, sannan a kiyaye daya bayan daya. Da fatan za a tabbatar an shigar da su a daidai polarity don guje wa rashin aiki ko lalacewa.
Tuntuɓar
Pro Gamersware GmbH
- Gaußstraße 1, 10589 Berlin, Deutschland
- info@gamersware.com
- +49 (0) 30 83797272
- www.kolink.eu
- support@kolink.eu
Alamar WEEE tana nuna cewa ba dole ba ne a zubar da wannan samfurin tare da sharar gida na yau da kullun. Ta wurin daidai zubar wannan samfurin, vou zai taimaka kare muhalli. Don ƙarin bayani kan zubar da wannan samfur, tuntuɓi gundumar ku, sabis ɗin zubar da shara ko shagon da kuka sayi samfurin.
Takardu / Albarkatu
 |
KOLINK NNITY Lateral Performance MIDI Tower Case [pdf] Manual mai amfani 230517, NNITY, NNITY Lateral Performance MIDI Hasumiyar Case, Ayyukan Lantarki MIDI Hasumiya Case, MIDI Tower Case, Hasumiyar Case |