KOLINK ARGB Observatory HF Mesh Midi Tower Case Manual
\

ABUN DA AKE SOYAYYA

• Motherboard/SSD Screws x14
  
  
• Tsayawar Motherboard x3
  
  
• PSU Screw x8
  
  
• 3.5" Drive Screw x4
  
  

• Ƙara-on Screw x2
  
  

CUTAR PANEL

• Ƙungiyar Hagu – Ja shafin don buɗe ginshiƙin gilashin da aka ɗora kuma a ɗaga hinges
• Ƙungiyar Dama - Cire babban yatsan yatsa biyu kuma zamewa.
• Panel na gaba - Nemo yanke ƙasa, daidaita chassis da hannu ɗaya, kuma cire daga yanke da ɗan ƙarfi har sai shirye-shiryen bidiyo sun fito.

FASSARAR DARIYA

• Daidaita motherboard ɗinku tare da chassis don gano inda yakamata a shigar da abubuwan tsayawa.
• Da zarar an gama, cire motherboard ɗin kuma ɗaure tsayawa daidai daidai.
• Saka farantin I/O na mahaifar ku a cikin abin da aka yanke a bayan harka.
• Sanya mahaifar ku a cikin chassis, tabbatar da cewa tashoshin baya sun dace cikin farantin I/O.
• Yi amfani da screws ɗin da aka bayar don haɗa motherboard ɗin ku zuwa chassis.

SHIGA WUTA

• Sanya PSU a baya na karar, a cikin PSU shroud.
• Daidaita ramukan kuma kiyaye tare da sukurori.

KATIN KYAUTA/CIYAR KAtin PCI-E

KATUN VIDIYO/SAFIYAR KAtin PCI-E

• Cire murfin PCI-E na baya kamar yadda ya cancanta (ya danganta da girman ramin katin ku)
• Sanya a hankali kuma zame katin PCI-E ɗinku a wuri, sannan amintattu tare da kawo sukurori na katin ƙara.

2.5 ″ SDD SDD (NA baya)

• Cire madaidaicin daga baya na farantin motherboard, haɗa faifan 2.5 inch ɗinku sannan ku murƙushe wuri.

2.5 ″ SSD INSTALLATION (REAR)

• Sanya 2.5 ″ HDD/SSD cikin/kan saman madaidaicin HDD kuma dunƙule ciki idan an buƙata.

  3.5 ″ HDD SHIGA

KYAUTA FAN INSTALLATION

• Cire tacewa kura daga saman akwati.
• Daidaita magoya bayan ku zuwa ramukan dunƙule a saman chassis kuma amintattu da sukurori.
• Sauya tacewar ku da zarar an amintu.

FAN GABA / BAYAN SHIGA

• Daidaita fan ɗin ku zuwa ramukan dunƙule akan chassis kuma aminta da sukurori.

RUWAN SANYA RADIATOR INSTALLATION

• Amince magoya baya ga radiator, sa'an nan kuma ɗaure radiator a cikin chassis ta hanyar kulla da sukurori daga waje.

I/O PANEL SHIGA

• A hankali bincika lakabin kowane mai haɗawa daga rukunin I/O don gano aikinsu.
• Ketare tunani tare da littafin uwa na uwa don gano inda ya kamata a sanya kowace waya, sannan a kiyaye daya bayan daya. Da fatan za a tabbatar an shigar da su a daidai polarity don guje wa rashin aiki ko lalacewa.

 

Kara karantawa Game da Wannan Jagoran & Zazzage PDF:

Takardu / Albarkatu

KOLINK ARGB Observatory HF Mesh Midi Tower Case [pdf] Manual mai amfani ARGB Observatory HF Mesh Midi Tower Case, ARGB, HF Mesh Midi Tower Case, HF Mesh Midi Tower Case, Mesh Midi Tower Case, Midi Tower Case, Midi Tower Case

Magana

• Manual mai amfani