BBD-320 Analog Multi-Dimensional Signal Processor
Jagorar Mai Amfani
Jagoran Fara Mai Sauri
3RD DIMENSION BBD-320
Analog Multi-Dimensional Signal Processor tare da Fasahar BBD

Muhimman Umarnin Tsaro

Tashoshin da aka yiwa alama da wannan alamar suna ɗauke da isassun wutar lantarki mai girma don zama haɗarin girgiza wutar lantarki.
Yi amfani da igiyoyin lasifikan ƙwararrun ƙwararrun kawai tare da ¼” TS ko matosai masu kulle-kulle waɗanda aka riga aka shigar. Duk sauran shigarwa ko gyara yakamata a yi ta ƙwararrun ma'aikata kawai.
Wannan alamar, a duk inda ta bayyana, tana faɗakar da ku game da kasancewar ƙaramin voltage cikin yadi - voltage wanda zai iya isa ya zama haɗarin girgiza.

Wannan alamar, a duk inda ta bayyana, tana faɗakar da ku ga mahimman umarnin aiki da kulawa a cikin wallafe-wallafen da ke biye. Da fatan za a karanta littafin.
Tsanaki
Don rage haɗarin girgizar lantarki, kar Notre motsa saman murfin (ko sashin baya).Babu sassan sabis na mai amfani a ciki. Koma hidima ga ƙwararrun ma'aikata.
Tsanaki
Don rage haɗarin wuta ko girgiza wutar lantarki, kar a fallasa wannan na'urar ga ruwan sama da danshi. Kada a fallasa na'urar ga ɗigowa ko watsa ruwa kuma babu wani abu da aka cika da ruwa, kamar vases, da za a sanya a kan na'urar.

Tsanaki
Waɗannan umarnin sabis na ma'aikatan sabis ne kawai don amfani. Don rage haɗarin girgiza wutar lantarki kar a yi kowane sabis banda wanda ke ƙunshe a cikin umarnin aiki. ƙwararrun ma'aikatan sabis ne su yi gyare-gyare.

1. Karanta waɗannan umarnin.
2. A kiyaye waɗannan umarnin.
3. Ku kula da duk gargaɗin.
4. Bi duk umarnin.
5. Kar a yi amfani da wannan na'urar kusa da ruwa.
6. Tsaftace kawai da bushe bushe.
7. Kada a toshe kowane buɗewar samun iska. Shigar daidai da umarnin masana'anta.
8.  Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
9. Kar a kayar da manufar aminci na filogi mai nau'in polarized ko ƙasa. Filogi na polarized yana da ruwan wukake guda biyu tare da fiɗa ɗaya fiye da ɗayan. Filogi mai nau'in ƙasa yana da ruwan wukake biyu da na ƙasa na uku. An tanadar da faffadan ruwa ko na uku don amincin ku. Idan filogin da aka bayar bai dace da mashin ɗin ku ba, tuntuɓi ma'aikacin wutar lantarki don maye gurbin mabuɗin da aka daina amfani da shi.
10. Kare igiyar wutar lantarki daga tafiya a kai ko a danne su musamman a matosai, madaidaitan ma'auni, da wurin da suke fita daga na'urar.
11. Yi amfani da haɗe-haɗe/na'urorin haɗi kawai da mai ƙira ya ƙayyade.
12. Yi amfani kawai tare da keken keke, tsayawa, tudu, sashi, ko tebur wanda masana'anta suka ƙayyade, ko sayar da na'ura. Lokacin da ake amfani da keken keke, yi amfani da taka tsantsan lokacin motsi haɗin keke/kayan don guje wa rauni daga faɗuwa.
13.  Cire wannan na'urar yayin guguwar walƙiya ko lokacin da ba a yi amfani da ita na dogon lokaci ba.
14. Koma duk hidima ga ƙwararrun ma'aikatan sabis. Ana buƙatar sabis lokacin da na'urar ta lalace ta kowace hanya, kamar igiyar wutar lantarki ko filogi ta lalace, ruwa ya zube ko abubuwa sun fada cikin na'urar, na'urar ta gamu da ruwan sama ko danshi, ba ta aiki kamar yadda aka saba. ko kuma an jefar da shi.
15. Za a haɗa na'urar zuwa madaidaicin soket na MAINS tare da haɗin ƙasa mai karewa.
16. Inda aka yi amfani da filogi na MAINS ko na'urar haɗa kayan aiki azaman na'urar cire haɗin, na'urar cire haɗin za ta kasance cikin sauƙin aiki.
17. Daidaitaccen zubar da wannan samfur: Wannan alamar tana nuna cewa ba dole ba ne a zubar da wannan samfurin tare da sharar gida, bisa ga umarnin WEEE (2012/19/EU) da dokar ku ta ƙasa. Ya kamata a kai wannan samfurin zuwa cibiyar tattarawa mai lasisi don sake yin amfani da kayan lantarki da na lantarki (EEE). Rashin sarrafa irin wannan sharar gida na iya yin mummunan tasiri ga muhalli da lafiyar ɗan adam saboda abubuwa masu haɗari waɗanda gabaɗaya ke da alaƙa da EEE. Hakazalika, haɗin gwiwar ku wajen zubar da wannan samfurin daidai zai ba da gudummawa ga ingantaccen amfani da albarkatun ƙasa. Don ƙarin bayani game da inda za ku iya ɗaukar kayan aikin sharar ku don sake amfani da su, tuntuɓi ofishin ku na birni, ko sabis ɗin tattara sharar gida.
18. Kar a shigar a cikin keɓaɓɓen wuri, kamar akwatin littafi ko naúrar makamancin haka.
19. Kada a sanya maɓuɓɓugar harshen wuta, kamar fitilu masu haske, akan na'urar.
20. Da fatan za a tuna da abubuwan muhalli na zubar da baturi. Dole ne a zubar da batura a wurin tarin baturi.
21. Ana iya amfani da wannan na'urar a cikin wurare masu zafi da matsakaicin yanayi har zuwa 45 ° C.

RA'AYIN DOKA

Kabilar Kiɗa ba ta yarda da wani alhaki ga kowace asarar da kowane mutum zai iya fuskanta wanda ya dogara ko dai gaba ɗaya ko a wani ɓangare na kowane kwatance, hoto, ko bayanin da ke ƙunshe a ciki. Bayanan fasaha, bayyanuwa da sauran bayanai suna iya canzawa ba tare da sanarwa ba. Duk alamun kasuwanci mallakin masu su ne. Midas, Clark Teknik, Lab Gruppe, Lake, Annoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugbear, Aston Microphones da Cool audio alamun kasuwanci ne ko alamun kasuwanci masu rijista na Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2023 Duka haƙƙin mallaka.

GARANTI MAI KYAU

Don sharuɗɗa da sharuɗɗan garanti da ƙarin bayani game da Garanti mai iyaka na Music Tribe, da fatan za a duba cikakkun bayanai akan layi a community.musictribe.com/pages/support#warranty.

3RD DIMENSION BBD-320 Sarrafa

Sarrafa

1. BYPASS - Danna wannan maɓallin don haɗa siginar shigarwa kai tsaye zuwa abubuwan da ake fitarwa.
2.  KYAUTA - Haɗa madaidaicin ƙafa ta hanyar ¼" TS kebul don kunna nesa tsakanin yanayin waƙar da aka zaɓa da kuma KASHE. Jajayen LED zai haskaka lokacin da tasirin ke aiki.
3. YANAYIN GIRMA - Zaɓi ƙarfin tasirin ƙungiyar mawaƙa, tare da 1 yana da dabara kuma 4 ya kasance mafi tsanani. An kawar da tasirin a cikin saitin KASHE.
4. MATAKIN FITARWA – Nuna overall fitarwa matakin.
5. WUTA – Kunna da kashe naúrar tare da wannan maɓalli. LED jauhari zai yi haske lokacin da aka kunna shi.
6.  FITARWA - Aika siginar da aka sarrafa zuwa wasu kayan aiki ta madaidaitan XLR ko ¼” igiyoyin TRS.
7. Bayani - Haɗa sigina masu shigowa zuwa naúrar ta hanyar daidaitaccen XLR ko ¼" TRS na USB.
8. MODE - Saita zuwa STEREO idan kuna amfani da abubuwan shigar da sitiriyo. Saita zuwa MONO don ba da damar shigarwar hagu don aika siginar zuwa tashoshin mawaƙa biyu.

3RD DIMENSION BBD-320 Farawa

Farawa

1. Shigar da BBD-320 a cikin rumbu ta amfani da sukurori 4. Yana iya zama mafi sauƙi don yin haɗin wuta da sauti kafin shigarwa. Idan ana amfani da siginar shigarwa guda ɗaya, saita canjin MODE zuwa MONO, in ba haka ba yi amfani da saitin STEREO.
2. Bayan an haɗa kebul ɗin wutar lantarki zuwa hanyar sadarwa ko igiyar wutar lantarki, kuma an haɗa igiyoyin sauti, kunna wutar lantarki.
3. Daidaita matakin siginar sauti mai shigowa ta yadda ma'aunin FITARWA ya kai 0 a taƙaice lokacin mafi ƙaranci.
4. Gwaji tare da saitunan mawaƙa guda 4. Hakanan ana iya matse maɓallai da yawa a lokaci guda don sautuna daban-daban.

Ƙayyadaddun bayanai

Shigar Audio
Nau'in	2 x XLR, 2 x ¼ "TRS daidaitacce
Impedance	30 kΩ daidaitacce, 15 kΩ mara daidaituwa
Matsakaicin matakin shigarwa	+ 21 dBu, daidaitacce kuma mara daidaituwa
CMRR a 1 kHz	Yawanci -50 dB
Fitar Audio
Nau'in	2 x XLR ma'auni, 2 x ¼" daidaitaccen TRS
Impedance	50 Ω daidaitacce kuma mara daidaituwa
Madaidaicin matakin fitarwa	+ 21 dBu, daidaitacce kuma mara daidaituwa
Ƙayyadaddun tsarin
Amsar mita, yanayin girma a kashe	20 Hz zuwa 20 kHz, +0/- 3 dB
Amo, yanayin girma a kashe	<-90 dBu, mara nauyi, 20 Hz zuwa 20 kHz
Amo, yanayin girma 1-3 kunna	<-79 dBu, mara nauyi, 20 Hz zuwa 20 kHz
Karya a samun haɗin kai, yanayin girma	Yawanci <0.1% @ 1 kHz
Chorus
Yanayin girma	Kashe, 1-4
Ketare	Kunnawa/kashe
Nisa	¼” TS shigarwa
Mitar matakin fitarwa	10 kashi, -30 zuwa +5 dB
Yanayin sitiriyo/mono	Zaɓaɓɓe
Tushen wutan lantarki
Main voltage	100 - 240 V ~, 50/60 Hz
Amfanin wutar lantarki	10 W
Fuse	Saukewa: T1AH250
Babban haɗin kai	Standard IEC receptacle
Na zahiri
Girma (H x W x D)	88 x 483 x 158 mm (3.5 x 19 x 6.2 ″)
Nauyi	2.5 kg (5.5 lbs)

Wasu muhimman bayanai

Bayani mai mahimmanci

1. Yi rijista akan layi. Da fatan za a yi rajistar sabon kayan aikin Kiɗa na ku nan da nan bayan kun saya ta ziyartar musictribe.com. Rijista siyan ku ta amfani da fom ɗin mu mai sauƙi na kan layi yana taimaka mana don aiwatar da da'awar gyara ku cikin sauri da inganci. Hakanan, karanta sharuɗɗan garantinmu, idan an zartar.
2. Rashin aiki. Idan mai siyar da Izinin Ƙirar Kiɗa ɗin ku bai kasance a kusa da ku ba, kuna iya tuntuɓar Mai Cika Izin Ƙabilar Kiɗa don ƙasarku da aka jera a ƙarƙashin “Tallafawa” a musictribe.com. Idan ba a jera ƙasarku ba, da fatan za a bincika ko za a iya magance matsalar ku ta hanyar “Tallafin Kan Kan layi” wanda kuma ana iya samunsa ƙarƙashin “Taimako” a musictribe.com. A madadin, da fatan za a ƙaddamar da da'awar garantin kan layi a musictribe.com KAFIN mayar da samfur.
3. Haɗin Wuta. Kafin shigar da naúrar a cikin soket ɗin wuta, da fatan za a tabbatar cewa kuna amfani da madaidaicin madannin wutar lantarkitage don samfurin ku na musamman. Dole ne a maye gurbin fis ɗin da ba daidai ba tare da fiusi iri ɗaya da ƙima ba tare da togiya ba.

BAYANIN KIYAYEWA HUKUMAR SADARWA TA TARAYYA
Klark Teknik
3RD DIMENSION BBD-320

Sunan ƙungiya mai alhakin: Music Tribe Commercial NV Inc.
Adireshin: 122 E. 42nd St.1,
hawa na 8 NY, NY 10168,
Amurka
Adireshin i-mel: legal@musictribe.com

3RD DIMENSION BBD-320
An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin mazaunin
shigarwa. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
•  Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Wannan kayan aikin ya dace da Sashe na 15 na dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
(1) wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
(2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aikin da ba'a so.
Bayani mai mahimmanci:
Canje-canje ko gyare-gyare ga kayan aikin da ƙungiyar kiɗa ba ta amince da ita ba na iya ɓata ikon mai amfani na amfani da kayan.

Ta haka, Music Tribe yana bayyana cewa wannan samfurin yana cikin bin umarnin
2014/35/EU, Umarnin 2014/30/EU, Umarnin 2011/65/EU da Gyara 2015/863/
EU, Umurnin 2012/19 / EU, Dokar 519/2012 REACH SVHC da Dokar 1907/2006 / EC.
Ana samun cikakken rubutun EU DoC a https://community.musictribe.com/
Wakilin EU: Kabilan Kiɗa Brands DK A/S
Adireshin: Gimmel Strand 44, DK-1202 København K, Denmark
Wakilin Burtaniya: Music Tribe Brands UK Ltd.
Adireshi: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

Takardu / Albarkatu

KLARK TEKNIK BBD-320 Analog Multi-Dimensional Signal Processor [pdf] Jagorar mai amfani BBD-320 Analog Multi-Dimensional Signal Processor, BBD-320, Analog Multi-Dimensional Signal Processor, Multi-Dimensional Signal Processor, Dimensional Signal Processor, Signal Processor, Processor

Magana

• Manual mai amfani