HOTDOG WC7X Mai Kula da Zazzabi

Wanda ya kera ta:
Augustine Temperature Management 7656 West 78th Street Bloomington, MN 55439 USA
TELku: 952.465.3500
FAXku: 952.465.3501
EMAIL: cs@augsurg.com
www.hotdogwarming.com
Wakilin EU mai izini
NL-AR-000000116
TEL (31) (0) 70 345-8570
FAX (31) (0) 70 346-7299
Mai shigo da MDR
MedEnvoy Global BV Prinses Margrietplantsoen 33 – Suite 123 2595 AM The Hague The Netherlands
NL-IM-000000248
TEL:+31 70 326 2148

Tuntuɓar Sabis na Abokin ciniki

• Waya: +1-952-465-3500
• Imel: CS@AugSurg.com

GABATARWA

Babban Bayani:

• Tsarin Gudanar da Zazzabi na HotDog ya ƙunshi Mai Sarrafa, Na'urori masu dumama da za a sake amfani da su (misali, Dumama Blankets, Katifan Dumama), da sauran na'urorin haɗi.
• Alhakin likitan ne don tantance ko dumamar yanayi ya dace da kowane majiyyaci. Bai kamata a yi amfani da Tsarin ba lokacin da la'akari na asibiti ya nuna cewa ba a ba da shawarar ɗumamar mara lafiya ba.

Mahimmancin Kula da Zazzabi / Bayanin Yanayin atomatik:

• Mai Gudanarwa (WC7X) na iya auna zafin ainihin majiyyaci daga bincike da aiki akan yanayin AUTO ta yadda Mai Kula da kansa ke daidaita saitunan zafin jiki dangane da ainihin zafin mai haƙuri.
• Mai Sarrafa na iya fitar da yanayin zafin majiyyaci zuwa masu sa ido na majiyyaci domin ba da bayanai ga rikodin likitancin lantarki.

Alamomi don Amfani

Gabaɗaya Alamun Amfani:

• Tsarin Gudanar da Zazzabi na HotDog an yi niyya ne don hanawa ko magance hypothermia kuma don samar da dumi ga marasa lafiya. Ya kamata a yi amfani da Tsarin a cikin yanayin da marasa lafiya ba za su iya kula da yanayin al'ada ba. Ana iya amfani da Tsarin tare da manya da marasa lafiya na yara.
• An yi nufin tsarin da farko don amfani a asibitoci da cibiyoyin tiyata ciki har da, ba tare da iyakancewa ba, dakunan aiki, dakunan farfadowa, dakunan gaggawa, ƙonawa da kuma kan wasu benaye na likita / tiyata. Mahimman Kulawa da Yanayin Zazzabi / Alamu don Amfani:
• An yi nufin Mai Kula da (WC7X) don auna zafin zafin mai haƙuri daga bincike da aiki akan yanayin AUTO ta yadda Mai Kula da kansa ke daidaita saitunan zafin jiki dangane da ainihin zafin majiyyaci.

Contraindications

• Kada ku dumi ischemic ko nama maras perfused; raunin thermal na iya haifar da shi. Examples sun haɗa da nama nesa zuwa aortic giciye clamping ko kuma lokacin da magungunan vasoconstrictive zasu haifar da mummunan vasoconstriction na dogon lokaci.
• Kada ku dumi marasa lafiya da ke karbar maganin transdermal; ƙara yawan isar da magunguna na iya faruwa.

Gabaɗaya

• Hatsarin fashewa - Kada a yi amfani da Tsarin a gaban abubuwan kashe wuta mai ƙonewa ko yanayin wadataccen iskar oxygen kamar ɗakunan hyperbaric, tantunan oxygen, da sauransu.
• Duba abubuwan tsarin kafin kowane amfani don alamun lalacewa ko wuce gona da iri kamar yanke, ramuka, ko sako-sako da haɗin lantarki ko wuraren sanyi. Idan alamun lalacewa sun bayyana ko kuma idan na'urar ta dumama ta kasance cikin matsanancin ƙarfi na jiki (misali tsunkule ta clamps ko gudu da kuloli), kar a yi amfani da samfurin har sai ma'aikatan fasaha sun duba shi.
• Kar a ci gaba da amfani da tsarin idan alamar zafin jiki da/ko duk wani ƙararrawa na ci gaba da yin sauti bayan sake saiti. Koma zuwa sashin "Ƙararrawa da Faɗakarwa" na wannan jagorar don ƙarin bayani.
• Gargaɗi da ake buƙata ta IEC 2-35 Standard: Yin amfani da kayan aiki mai kyau na thermal conductivity, kamar ruwa, gel, da makamantansu, tare da na'urar dumama ba a kunna ba na iya rage zafin jikin mara lafiya.

HANKALI

Dokar tarayya (Amurka) ta ƙuntata wannan na'urar don siyarwa ta ko akan odar ƙwararrun kiwon lafiya mai lasisi.

MATAKAN KARIYA

• Yi amfani a ƙarƙashin kulawa kai tsaye na likita.
• Kula da mahimman alamun majiyyaci akai-akai yayin dumama bisa ka'idar hukuma. Idan rashin kwanciyar hankali mai mahimmanci ya faru, sanar da likitan.
• Ya kamata a kula yayin amfani da hanyoyin dumama yawa.
• Haɗarin haushin fata da ke haifar da haɗuwa da hanyoyin maganin tiyata a ƙarƙashin mai haƙuri na iya ƙaruwa tare da dumama; tabbatar da cewa an bi umarnin maganin maganin tiyata don amfani.
• Sai kawai toshe jack ɗin da aka yarda da shi na mm 3.5 cikin Tout don dalilai na jigilar bayanan zafin haƙuri ga mai duba mai haƙuri.
• Tuntuɓi wakilin tallace-tallace na gida game da zubarwa. Kada a zubar da wannan na'urar tare da sharar gida gabaɗaya a ƙarshen rayuwa. Na'urar ba ta haifar da wani haɗari mai yuwuwa.
• Duk wani mummunan lamari da ya faru dangane da wannan na'ura ya kamata a kai rahoto ga masana'anta da hukumomin da ke da ikon ƙasar da abin ya faru.
• An ƙera Mai Sarrafa don karɓar yarda, YSI 400 masu dacewa da gwajin zafin jiki. Matsakaicin nunin zafin jiki shine 31C-43C. Matsakaicin: 0.1C. Daidaito: ± 0.125°C.
• Yana aiki azaman ma'aunin zafi da sanyio na "Yanayin Kai tsaye", yana nuna ma'aunin zafin jiki daga wurin aunawa.
• Kar a bude Controller. Ma'aikatan da aka amince kawai zasu iya buɗe Mai Kula da sabis. Babu sassan da za a iya amfani da su. Idan ana buƙatar sabis, tuntuɓi Sabis na Abokin Ciniki. Mai sana'anta ba shi da alhakin dogaro, aiki, ko amincin Tsarin idan ɗayan waɗannan abubuwan sun faru:
• Mutum mara izini ne ke tarwatsa ko sabis ɗin Mai Gudanarwa.
• Ana amfani da sassan tsarin ta wata hanya dabam dabam da aka kwatanta a cikin Littattafan Mai amfani.
• An shigar da Mai Gudanarwa a cikin yanayin da bai dace da buƙatun lantarki da ƙasa da suka dace ba.
• Mai kula yana ƙasa kuma an haɗe shi zuwa tebur mara tushe wanda aka yi niyya don amfani tare da na'ura mai sanyaya ko makamancin haka.

FARKO SAITA & MAJALISI

Abubuwan da ke biyowa an haɗa su a cikin katun jigilar Mai Kula:

• 1-Model Mai Gudanarwa WC7X
• 1- Wutar wutar lantarki
• 1-IV igiyar adaftar da hawa hardware

Ana sayar da na'urorin haɗi HotDog mai sake amfani da su daban.

Hawan Mai Gudanarwa zuwa Pole IV

Don hawan Mai Sarrafa zuwa sandar IV, da farko amintaccen adaftan sandar igiya na IV zuwa Mai kula da sukurori da aka bayar.
Sanya adaftar sandar sanda ta IV a kusa da sandar IV kuma kunna clamp rike da agogon hannu har sai an danne shi (Hoto na 1).

Tsanaki
Don hana sandar IV daga tipping, haɗa Mai sarrafawa a tsayin da ke ba da kwanciyar hankali. Ana ba da shawarar yin amfani da sandar IV tare da ƙaramin radius na wheelbase na 35.6 cm (14 in) kuma don hawan Mai Kula da bai fi 112 cm ba (44 in) daga bene. Rashin hawan Mai Kula da kyau na iya haifar da sandar IV zuwa titin, maiyuwa haifar da rauni.

Yi layi na hawa clamp tare da kasa biyu sets na dunƙule ramukan. MUHIMMI: clamp ba zai dace a saman biyu sets na dunƙule ramukan.

Tabbatar cewa kebul na wutar lantarki yana cikin clamp ramin zuwa ƙulla taimako na USB. Matse sukurori ta amfani da maƙallan Allen da aka kawo.

Dutsen Mai Gudanarwa zuwa sandar IV kuma ka daure clamp

Akwatin ajiya na zaɓi ana siyarwa daban. Haɗa idan akwai.

• Bayan Mai Sarrafa yana fasalta daidaitaccen ƙirar VESA 75mm x 75mm, yana ba da damar ƙarin zaɓuɓɓukan hawa lokacin amfani da ramukan sama da ƙasa. Wurin da aka bayar na IV klamp kawai yana aiki tare da ramuka huɗu na ƙasa.
  Juya madaidaicin madaurin riƙewar kebul ƙasa a gefen Mai sarrafawa. Yi amfani da madauki don taimakawa tare da sarrafa kebul lokacin da aka ɗora Mai Gudanarwa zuwa sandar IV

BAYANIN AMFANI

Umarnin da ke ƙasa suna bayyana yadda ake sarrafa Mai Gudanarwa. Don bayani game da na'urori masu dumama da na'urorin haɗi, koma zuwa littafin mai amfani da aka bayar tare da kowane abu.

1. Saka filogin wutar lantarki a cikin madaidaicin tashar wutar lantarki ta asibiti. Kunna
   Mai sarrafawa ta hanyar maɓallin rocker a baya.
   GARGADI: Don guje wa haɗarin girgizar lantarki, dole ne a haɗa wannan kayan aikin zuwa na'ura mai ba da hanya tsakanin hanyoyin sadarwa tare da ƙasa mai kariya.
   Lura: Mai kula yana ƙasa kuma bai kamata a haɗe shi zuwa teburin da ba a ƙasa ba da aka yi nufin amfani da na'ura mai sanyaya ko makamancin haka.
2. Matsayi da amintaccen Na'urar (misali, Dumama Blanket, Katifa mai dumama) bin umarni a cikin littafin mai amfani na kowace na'ura.
3. Saka kebul ɗin haɗin na'urar zuwa tashar da ta dace akan Mai Kula
   

   WC77 Multi Port	WC71 Single Port	Launin tashar jiragen ruwa	Na'ura
   A, B, C, D	A	Yellow	Dumama Blanket, Likitan Vest
   M		Blue	Katifa mai dumi
   Tprobe (A)	Tprobe (A)	Azurfa	Binciken Zazzabi na haƙuri (3.5mm TSR jack)
   Tout	Tout	Azurfa	3.5mm TR Jack (YSI 400 mai jituwa fitarwa)

   Port A a gaban Controller		Bayan Mai Gudanarwa, hagu na ƙasa TTruCore (Ba A Yanzu Akwai), Tprobe da Tout a bayan Mai Gudanarwa (Port Single da Multiport)
   	Tashar jiragen ruwa B, C, D da M akan
   	baya hagu na sama na
   	Mai sarrafawa
   	(Multiport kawai)

   Lura: Lokacin da aka saka kebul na haɗi a cikin Mai sarrafawa, sauti mai ji yana nuna cewa firikwensin sarrafawa da zafin jiki mai zafi suna nan kuma suna aiki yadda ya kamata. Ana samun tashar tashar jiragen ruwa akan allon taɓawa.

4. Sarrafa na'urori masu dumama ta amfani da allon taɓawa
   

   Toshe na'urar Dumama don farawa. Lokacin da aka shigar da kebul ɗin da kyau a cikin Mai sarrafawa, sauti mai ji yana nuna cewa na'urar tana haɗe da kyau, kuma gunkin tashar tashar ta yana haskaka kan allo.	· Taɓa alamar haske don kunnawa.
   · Na'urar dumamar yanayi da aka haskaka a kore ita ce Na'urar da aka zaɓa a halin yanzu. Don zaɓar zafinsa, yi amfani da + ma'aunin zafi da sanyio don ƙara yawan zafin jiki ko - ma'aunin zafi da sanyio don rage zafin. Kashe tashar jiragen ruwa da aka haskaka a gunkin jan wuta.	· Kowane na'ura mai dumama da aka haɗa ana iya daidaita shi daban. Sauran gumaka na dama suna daidaita duk yanayin zafi na tashar jiragen ruwa lokaci guda: · All High Duk Matsakaici · Duk Kasa · Duk A kashe

5. Idan kuna amfani da binciken zafin jiki kuma kuna son shigar da yanayin AUTO, duba umarnin a shafi na 8 da 9.
6. Lokacin da maganin ɗumamar haƙuri ya cika, juya Mais Power Canja zuwa KASHE.
7. Bayan amfani, cire haɗin Mai sarrafawa daga tashar lantarki

KALLON AZAFI DA JAGORANCIN HANYA

1. Wannan Mai Sarrafa zai iya saka idanu kan zafin jiki na majiyyaci lokacin karɓar sigina daga binciken zafin jiki mai dacewa da YSI 400. Wannan yana buƙatar kebul na adaftar mallakar mallaka don yin haɗin gwiwa. Yi magana da abokin ciniki na tallace-tallace don ƙayyade madaidaicin kebul don halin da ake ciki. Mai sarrafawa kuma zai iya fitar da zafin mai haƙuri zuwa na'ura na ɓangare na uku (misali zuwa tashar jiragen ruwa zuwa EMR). Don fitar da zafin jiki na majiyyaci zuwa na'urar duba marasa lafiya na ɓangare na uku, haɗa madaidaicin jack "layin kai" na masana'antu (3.5mm mono) zuwa tashar jiragen ruwa na Tout.
2. Idan ana amfani da bincike na zafin jiki mai ɓarna, ana ba da shawarar bincike na esophageal ko dubura don daidaito. Tabbatar cewa binciken ya kasance daidai a cikin majiyyaci, (ko kuma a yanayin binciken da ba zai iya cutar da shi ba, akan majiyyaci) kuma toshe binciken a cikin kebul na adaftar mallakar mallaka, wanda dole ne a toshe shi cikin tashar jiragen ruwa na Tprobe. Lura: Idan ya yi daidai da na'urar binciken zafin jiki ta IFU, jeri na gwajin zazzabi na esophageal ya kamata ya wuce "matsi" na farko na esophagus da ke karkatar da zuciya. Turawa bayan wannan batu yakamata ya samar da ingantaccen zafin jiki a bayan zuciya.
3. Yayin da Mai Gudanarwa ke jiran ingantaccen zafin jiki na haƙuri daga binciken, gilashin sa'a yana nuni kusa da "T". Bayan an kafa ingantaccen zafin jiki na haƙuri (31°-43°C & <1°C canji/minti), za'a nuna zafin mai haƙuri.
4. Ana samun yanayin AUTO idan an sanya na'urorin Dumowa akan majiyyaci kuma an shigar da su kuma an auna ingantacciyar zafin jikin mutum. Yanayin AUTO yana daidaita saitunan zafin jiki na Na'urar ta atomatik dangane da zaɓin mai amfani "Yankin Normothermia" a cikin haɓaka da aka kwatanta a cikin Tebu 2. Zaɓuɓɓuka na sama da ƙananan iyaka na Yankin Normothermia a cikin Menu - Saituna - Zazzabi Graph. Dole ne yankin ya ƙara 1 ° C ko fiye.
5. Lura: Yayin da yake cikin yanayin AUTO, likitan likitancin dole ne ya bi duk alamomi da contraindications don amfani. Domin misaliample, Yanayin AUTO bai san ko majiyyaci ne giciye-cl aortic baamped ko kuma idan naman ischemic yana nan: Yanayin AUTO bai kamata a taɓa amfani da shi ba a waɗannan lokuta. Dole ne likita ya kasance koyaushe yayin amfani. Likitan dole ne ya tabbatar da ci gaba da sa ido kan zafin jiki na haƙuri kuma kada yayi amfani da yanayin AUTO akan marasa lafiya waɗanda ke wayar hannu (misali majinyatan ICU waɗanda zasu iya kawar da binciken zafin su). Bai kamata a yi amfani da yanayin AUTO ba lokacin da burin zafin jiki ya bambanta da sake dumamawa kawai (misali a wasu tiyatar zuciya tare da sanyaya tilas, sannan ta sake dumama). Ana ba da shawarar yin aiki da hannu a waɗannan lokuta.
   

   Tebur 2: Yanayin AUTO - Example
   Normothermia Yanki (Zaɓi mai amfani)	Exampda Patient Zazzabi	Na'urori: All High	Na'urori: Duk Matsakaici	Na'urori: Duk Ƙananan	Na'urori: Duk Kashe
   >> Saitin Iyakar Babban	38.0°C				X
   67% na Babban Iyaka	37.3°C			X
   33% na Babban Iyaka	36.7°C		X
   <Lower Limit Setting	36.0°C	X

   a. Wannan allon yana bayyana lokacin da ingantattun yanayi ke nan don aiki a yanayin AUTO (ana toshe na'urorin dumama kuma an gano ingantaccen zafin jiki na haƙuri). b. Likitan ya zaɓi (✓) don haɗa yanayin AUTO.	c. Yanayin AUTO yana saita duk na'urori masu dumama da aka haɗa ta atomatik zuwa mafi girman saitin zafin jiki. Ana nuna zafin jiki na majiyyaci kuma an shigar da karar. Ana iya shigar da bayanan zafin haƙuri na dindindin zuwa EMR ta tashar tashar Tout a cikin ƙarin 0.1°C lokacin amfani da kebul da ta dace. Wannan yana hana asarar bayanai idan wutar lantarki ta tsaya ba zato ba tsammani. An shigar da lokacin farawa na AUTO azaman T-0 na tsawon lokacin shari'ar. Ba a shigar da saitunan dumama na'ura ba.
   d. Lokacin da aka ƙaddara matakin haƙuri na al'ada, ana daidaita saitunan zafin na'urar zuwa ƙasa ta atomatik bisa ga kashi ɗaya.tage na yankin normothermia. Dubi Table 2 a shafi na 8 don tsohonample.	e. Na'urar tana kasancewa a yanayin AUTO har sai an cire alamar yanayin AUTO. Likitan na iya sake shigar da yanayin AUTO ta sake zabar alamar yanayin AUTO. Idan yanayin zafi na majiyyaci ba shi da inganci yayin yanayin AUTO, Mai Kula zai nuna Faɗakarwar E7 wanda ke nuna cewa yanayin AUTO ya rabu. A wannan lokacin na'urorin ɗumamar za su juya zuwa jiran aiki, kuma likitan zai buƙaci yin aikin dumama da hannu.

6. Lokacin da maganin ɗumamar haƙuri ya cika, juya Mais Power Canja zuwa KASHE.
7. Bayan amfani, cire haɗin Mai sarrafawa daga tashar lantarki

KULLA ALAMOMINVIEW

	1. Baya 2. Taken Menu 3. Babban Menu 4. Sub Menu 5. Shafi na gaba 6. Shafuka 7. Shafi na baya
	1. Na'urar da aka zaɓa a halin yanzu ( iyakar kore) 2. Rage Zaɓan Zaɓaɓɓen Na'urar 3. Ƙara Zaɓan Na'urar da aka zaɓa 4. Saita Duk Na'urori zuwa Babban Zazzabi 5. Saita Duk Na'urori zuwa Matsakaicin Zazzabi 6. Saita Duk Na'urori zuwa Ƙananan Zazzabi 7. Kashe Duk Na'urori 8.       View Bayanin Na'urar da aka zaɓa 9. Kashe Na'urar da aka zaɓa
	1. Zuƙowa 2. Zuƙowa 3. Mode Mode ta atomatik (Kunawa / Kashe) 4. Zazzabi na haƙuri "T" (TruCore (NA) ko Bincike) 5. Hoton Zazzabi na haƙuri 6. Gungura Dama 7. Graph Overview 8. Gungura Hagu
Nasihun Nuni: A. Kar a danna ƙasa da ƙarfi. Ba a buƙatar wannan. B. Safofin hannu masu kauri da yawa na iya hana gano yatsa. C. Danshi akan allon zai iya rikitar da tsarin; tabbatar da cewa allon ya bushe kafin amfani.

ARARAWA DA FADAKARWA

NOTE: DUMI-DUMIN BLANKET KO TATSARKI ZAI DAKATAR DA DUMINSU IDAN YANAYIN ƙararrawa ya bayyana.

Lambobin Kuskure	Bayanin Kuskure	Matakan Magance Matsala
E1	Yawan Zazzabi	Lokacin da zafin jiki ya wuce digiri ɗaya sama da wurin da aka saita, ana cire ƙararrawar ƙararrawa da ƙarfi daga Na'urar Warming. Cire na'urar don sake saita ƙararrawa. Jira mintuna 5 sannan sake haɗa na'urar. Kunna Mai Gudanarwa kuma zaɓi zafin jiki. Idan Ƙararrawar ta sake faruwa, dakatar da amfani da Na'urar kuma tuntuɓi goyan bayan fasaha.
E2	Rashin Isarwa Wuta	Lokacin da na'urar ɗumama ba ta isa wurin saita zafin jiki cikin mintuna 10 ba, ƙararrawar tana ƙara kuma ana cire wuta daga na'urar. Bincika don tabbatar da cewa na'urar tana cikin hulɗa da majiyyaci kuma yankin firikwensin yana taɓa majiyyaci. Ji bargo ko katifa don rashin daidaituwar yanayin zafi a saman ɗumama kuma kar a yi amfani da shi idan an gano wuraren sanyi ko zafi. Cire na'urar kuma sake haɗawa don sake saiti. Idan Ƙararrawar ta sake faruwa, dakatar da amfani da Na'urar kuma tuntuɓi goyan bayan fasaha.
E3	Tashar Tashar Ta Yanzu Ta Kai	Idan wutar lantarki a cikin Na'urar Warming ya wuce iyakar da aka yarda, ana cire ƙararrawar ƙararrawa da ƙarfi daga Na'urar. Wannan na iya nuni da matsalar lantarki tare da Na'urar. Cire na'urar daga Mai sarrafawa kuma sake haɗawa don sake saiti. Idan Ƙararrawar ta sake faruwa, dakatar da amfani da Na'urar kuma tuntuɓi goyan bayan fasaha.
E4	Sensor ko gazawar Kebul	Idan Mai Sarrafa ya rasa sadarwa tare da firikwensin a cikin Na'urar Warming, ƙararrawar ƙararrawa, kuma ana cire ƙarfi daga Na'urar. Ana iya haifar da wannan ta hanyar matsalar lantarki a cikin Na'ura ko Mai sarrafawa. Musanya igiyoyi da na'ura tare da sanannen samfur mai kyau don ware matsalar idan zai yiwu. Idan matsalar ta ci gaba, daina amfani da na'urar ko kebul kuma tuntuɓi goyan bayan fasaha
E5	Gano Ninke Na'ura	A cikin Na'urar Dumama sanye take da jeri mai zafi fiye da kima, zafi na gida wanda ke haifar da naɗewar Blanket yana haifar da ƙararrawa, kuma ana kashe wutar Blanket. Duba Blanket don wurare masu ninke. Don sake saita ƙararrawa, cire kebul ɗin, jira mintuna 5 kuma sake haɗawa. Idan Ƙararrawa ya sake faruwa, dakatar da amfani da Blanket kuma tuntuɓi goyan bayan fasaha
E7	An Kashe Yanayin atomatik	Tabbatar da wurin da ya dace na Sensor Zazzabi don ci gaba da amfani da yanayin AUTO ko sarrafa na'urori masu dumama da hannu.
E8	Fiye da Zazzabi Sensor (Na biyu)	Na'urar firikwensin zafin jiki ya wuce 46° C. Cire haɗin na'urori masu dumama kuma tuntuɓar tallafin fasaha.
EA, EC, EF, EH ko EP	Kasawar Hardware	Da fatan za a kashe Controller, jira minti daya, sannan a sake farawa. Idan matsalar ta ci gaba, tuntuɓi goyan bayan fasaha.

Lokacin Kashe Ta atomatik - Wannan fasalin yana hana tsarin barin shi ba da gangan ba. Ba a yi nufin tsarin don amfani ba tare da kasancewar likita ba. Tsarin ya ƙare zuwa kashewa ta atomatik na sa'o'i 6, idan babu hulɗa tare da Mai sarrafawa. Ana iya daidaita wannan lokacin har zuwa sa'o'i 24, idan an buƙata ta tsawon shari'ar. Don daidaita lokacin kashewa ta atomatik je zuwa: Saituna -> Ƙididdiga ta atomatik -> Yi amfani - ko + don daidaita lokacin.

TSAFTA MAI SARKI

Gargadi

KAR KA yi amfani da rigar rigar da ke digowa, kuma KAR a nutsar da Mai sarrafa cikin ruwa. Danshi zai lalata abubuwan da aka gyara, kuma raunin zafi na iya haifar da shi.

Matakan kariya

KAR KA yi amfani da tsantsa tsantsa tsantsa (misali, MEK, acetone, da sauransu) ko masu tsaftacewa mai ɗauke da hydrogen peroxide don tsaftace Mai Sarrafawa.

Yawanci

• Kamar yadda ake bukata

Kayan aiki / Kayan aiki

• Soso ko laushi mai laushi
• Magani mai laushi ko feshin maganin ƙwayoyin cuta
• Busasshen zane mai laushi

Hanya

1. Cire haɗin Mai sarrafawa daga tushen wutar lantarki kafin tsaftacewa.
2. Shafa Mai Sarrafa da soso mai danshi ko zane mai laushi; guje wa tura ruwa zuwa cikin ko'ina.
3. A bushe da kyalle mai laushi daban.

WANKAN DUMINSU BLANKETS DA KADUNA

Gabatarwa:

HotDog Warming Blankets da katifa sune na'urorin ɗumamar wutar lantarki marasa ƙarfi don amfani da su a cikin ɗakin aiki da kuma wuraren da aka riga aka yi da kuma bayan aiki a wuraren kiwon lafiya. Tsaftace da kashe katifu da bargo tsakanin amfani da majiyyaci idan sun bayyana ƙazantacce. Idan katifu da bargo ba a bayyane suke da ƙazanta ba, ana ba da shawarar kashe ƙwayoyin cuta a ƙarshen ranar aiki.

Tsanaki:

• Kada a nutsar da bargo ko katifu cikin ruwa. Kada a yi amfani da magungunan kashe kwayoyin cuta don tsaftace Blanket ko katifa. CDC (Amurka) ta ba da shawarar hana yin amfani da manyan magungunan kashe kwayoyin cuta don tsaftace saman muhalli wanda zai iya tuntuɓar majiyyaci tunda sinadarai suna da guba sosai. Kada a fesa maganin tsaftacewa cikin mahaɗin lantarki.
• Kada a yi amfani da hanyoyin tsaftacewa na tushen hydrogen peroxide saboda waɗannan na iya yin illa ga mahaɗar ciki.
• Kada a sanya na'urorin ɗumamar a cikin autoclave, sterilizer, atomatik mai wanki - disinfector, ko kowane tsarin zafi mai zafi saboda wannan na iya lalata na'urorin.

Matakan Tsaftacewa

Ya kamata a tsaftace barguna da katifu ta bin ka'idoji don na'urorin likitanci marasa mahimmanci waɗanda zasu iya tuntuɓar fata mara kyau. Exampna'urori makamantan su sun haɗa da cuffs na hawan jini, murfin tebur na jarrabawa, fakitin tebur na ɗakin aiki da tallafin tiyata. Matakan tsaftacewa gabaɗaya shawarwari ne kuma ba ana nufin maye gurbin ƙa'idodin tsaftacewa na musamman na asibiti ba.

1. Guji samun ruwan tsaftacewa cikin mahaɗin lantarki.
2. Idan akwai ruwan jikin da ake iya gani ko kuma datti, dole ne a cire su kafin a shafa maganin kashe kwayoyin cuta. Goge wuraren ta amfani da wanka da buroshi mai laushi ko soso don cire duk wani abu na halitta. Shafa saman Na'urar Warming da ruwa ta amfani da tallaamptufafi. Kada a nutsar da barguna a cikin ruwaye.
3. Aiwatar da ƙaramar-ko matsakaici-mataki-matsakaici ga na'urar gaba ɗaya ta hanyar fesa ko gogewa. Bi umarnin aikace-aikacen masana'anta don tabbatar da isasshen ƙwayar cuta.
4. Bayan tsaftacewa, tabbatar da cewa Na'urar ta bushe kafin sake amfani da ita

Tambayoyin da ake yawan yi

1. Ta yaya HotDog ke aiki? Blankets da katifa suna amfani da masana'anta na polymer da ake kira ThermAssure. Ƙananan voltage DC halin yanzu yana gudana akan wannan haske, masana'anta masu sassauƙa, kuma juriya yana haifar da zafi. Blanket da katifa ba sa amfani da fiber carbon ko tawada, wanda zai iya karyewa da haifar da wurare masu zafi.
2. Me yasa HotDog yake lafiya? Mai Sarrafa da gaske microprocessor ne mai ginanniyar abubuwan aminci da yawa. Yana sa ido kan na'urorin Warming da aka haɗa a majiyyaci kuma za ta daina aiki ta atomatik idan karantawa ba su da aminci. Blankets da katifa suna amfani da ƙaramin ƙarfitage mai keɓewar halin yanzu na DC don dumi. Yadin da aka yi amfani da shi na polymer mai sassauci yana haifar da zafi iri ɗaya ba tare da wurare masu zafi ba.
3. Shin bargo da katifa suna da wahalar tsaftacewa? Tsarin tsaftacewa yana ɗaukar daƙiƙa 30 ko ƙasa da haka. Ana iya tsaftace na'urorin dumama a cikin OR ta hanyar shafa tare da ƙananan-zuwa matsakaici-mataki-mataki. Kada ku yi amfani da masu tsabta da ke dauke da hydrogen peroxide. An tsara na'urori masu dumama don sauƙin tsaftacewa. Harsashi na waje wanda ba ya lalacewa ya ƙunshi maganin ƙwayoyin cuta kuma an rufe gefuna da zafi don kawar da ɓarna. CDC ta ce abubuwa marasa mahimmanci kamar HotDog Blankets da katifa suna da lafiya kuma ba su da haɗarin kamuwa da cuta.
4. Shin akwai babban haɗarin kamuwa da giciye tare da sake amfani da HotDog Blankets da katifa fiye da FAW da za'a iya zubarwa? A'a. Ana ɗaukar na'urorin Warming a matsayin "abubuwan da ba su da mahimmanci," ma'ana suna haɗuwa da fata mara kyau. A cewar CDC, "Kusan babu wani haɗari da aka rubuta don watsa masu kamuwa da cuta ga marasa lafiya ta abubuwan da ba su da mahimmanci..." Haɗarin kamuwa da cuta na iya zama mafi girma tare da FAW. FAW wani bangare ne kawai za a iya zubarwa. Ana amfani da busa da busa tare da dubban marasa lafiya daban-daban, wani lokaci suna motsawa daga wannan OR zuwa wani. Ɗaya daga cikin binciken da aka buga ya nuna cewa kashi 92 cikin 58 na masu busa FAW sun gurɓata da ƙwayoyin cuta, kuma kashi 2011 cikin XNUMX na ciki ne da aka fitar da su (Albrecht, AJIC, XNUMX). Lalacewar tana da mahimmanci saboda iska mai tsananin gudu tana kadawa a cikin yankuna na ƙwayoyin cuta. Gurɓataccen iska mai zafi yana buɗewa a ƙarƙashin labulen, yana haɗuwa da iskan bene "datti" kuma ya tashi cikin filin da bakararre.
5. Ta yaya HotDog ya fi aminci ga aikin tiyatar orthopedic? Dumamar mara lafiyar HotDog mara iska ya fi aminci ga fiɗa da aka dasa kayan ƙasashen waje-kamar ƙashin ƙashi da tiyatar zuciya-saboda babu sharar zafi da ke lalata filin da bakararre tare da gurɓatawa. Haɓaka zafi mai zafi daga ɗumamar iska mai ƙarfi yana gurɓata filin tiyata mara kyau da ke sama da tebur tare da iska mai datti daga ƙasa ta hanyar samar da igiyoyin ruwa. Akwai babban jiki na peer-reviewed shaida da aka buga a kan wannan batu.
6. Ta yaya zan sami mafi kyawun sakamakon dumamar yanayi? YANKIN SAFAR JIKIN: Dumi wuri mai yawa gwargwadon yiwuwa. Dumama ainihin yana da tasiri fiye da kewaye. FARKON FARUWA: Fara ɗumama da zaran mara lafiya ya iso cikin OR. HANYAR SANARWA: Tabbatar cewa firikwensin yana cikin hulɗa da majiyyaci. KASHEN BAKI: Yi amfani da shinge mafi ƙanƙanta mai yuwuwa tsakanin majiyyaci da Dumama Blankets ko katifa.
7. Za a iya amfani da HotDog System a cikin x-ray? Ee. The hita masana'anta ne gaba daya radiolucent. Koyaya, kowace Dumama Blanket da katifa tana da sandunan bas masu kama da juna waɗanda ke tafiya tare da dogon gefen na'urar dumama. Ana iya ganin waɗannan akan x-ray. Bugu da ƙari, yankin da ke kewaye da firikwensin kuma ba shi da radiyo. Idan za a yi x-raying (ta hanyar kogon ƙirji, misaliample) sa'an nan kuma a sanya katifa a matsayi ko kuma a juya shi 180° ta yadda wurin hoton bai ƙunshi firikwensin ba.
8. Shin HotDog yana ba da kowane zaɓin dumama don lokuta ta amfani da Trendelenburg mai tsayi? Ee. Hanyoyin da aka sanya majiyyaci a cikin Trendelenburg mai tsayi a tarihi yana haifar da babban adadin hypothermia saboda ƙananan filin da ke samuwa don dumama. Kayan aiki na HotDog WaffleGrip Trendelenburg yana hana mai haƙuri daga zamewa a kan tebur yayin da yake ba da dumi a ƙarƙashin mai haƙuri.
9. Me yasa HotDog barguna da katifa ke ƙarewa? A tsawon lokaci wutar lantarki da ke gudana a kan masana'anta na polymer na yin oxidizes shi, yana canza juriya da lokacin da yake buƙatar isa ga zafin jiki. Lokacin sabo yana ɗaukar ƴan mintuna kaɗan kawai don isa ga yanayin da aka saita. Bayan ranar karewa, wanda aka samo akan kebul na shigarwar wutar lantarki, na'urar zata ɗauki kusan mintuna 10 don isa yanayin zafin da aka saita. Ba mu da bayanan da za su goyi bayan amfani da na'urorin da ya wuce warewa.

KAYAN TSARI DA KAYAN HAKA

Lambar Sashe	Bayani
B103	Ƙarƙashin Ƙarƙashin Jiki
B104	Cikakkun Kwancen Dumin Jiki
B105	Blanket Dumama Maɗaukakiyar Matsayi
B107	Babban Dumama Blanket
B110	Tushen Dumama
B500	Blanket Dumamar Duniya
B203	Bargon Dumama Ƙarƙashin Jiki na Yara
B270	Karamin Kundin Dumama Shugaban Yara
B271	Babban Kundin Dumama Kan Yara Kan Yara
U101	Katifa Mai Dumama Ƙarƙashin Jiki, 82 cm (32 ")
U102	Katifa Mai Dumama Ƙarƙashin Jiki, 127 cm (50 ")
U220	Katifa mai dumin Jiki na Yara
U300	Katifa mai dumama Trendelenburg 89 cm (35 ")
A101	Kebul, Blanket, Mita 4, Rawaya
A102	Kebul, Blanket, Mita 5, Rawaya
A108	Wurin Ajiye Waya, Dutsen Pole IV
A109	Wurin Ajiye Waya, Dutsen bango
A110	Wurin Ajiye Waya, WC7X Clamp-Mountable
A112	Kebul, Katifa, Mita 5, Blue
A300	Kit ɗin Matsayin WaffleGrip Trendelenburg, Fakiti 10
A301	WaffleGrip Trendelenburg Kit ɗin Matsayi + Tabbataccen Slide Slide, Fakiti 10
A411-IN	Kebul na haɗin haɗin kai (3.5mm TRSM-TRSF) 2m

BAYANIN ALAMOMIN KYAUTATA

HUKUNCIN FASAHA

• Karanta Kafin Kayayyakin Hidima
• Gyara, kiyaye kariya, gwajin aminci, da sabis na Tsarin suna buƙatar ƙwarewar ƙwararrun ƙwararrun ma'aikatan sabis na kayan aikin likita, waɗanda suka saba da kyakkyawan aiki don gyaran kayan aikin likita.
• Kar a bude Controller.
• Babu sassan da za a iya amfani da su. Idan ana buƙatar sabis, tuntuɓi Tallafin Fasaha.
• Yi duk ayyukan kulawa daidai da umarnin da ke cikin wannan jagorar fasaha.
• Ma'aikatan da aka amince da su: cire na'urar Warming kafin yin aiki da abubuwan ciki.

GYARA & GWAJI

Duban Tsaron Lantarki da Gwajin Aiki

Yawanci

Ya kamata a kammala waɗannan gwaje-gwaje sau ɗaya a kowane watanni 24 (ko kuma akai-akai idan ka'idodin asibiti ya buƙaci).

Kayan aiki / Kayan aiki

• Kebul na Na'urar Warming (A101 ko A102, A112)
• Gwajin ci gaba na ƙasa
• Leakage na yanzu gwajin
• Calibrated, thermocouple mai saurin amsawa da mita
• HotDog Dumama Blanket ko Warming Katifa (na zaɓi)

Hanya

1. Saka filogin wutar lantarki a cikin madaidaicin tashar wutar lantarki ta asibiti kuma tabbatar da cewa babu igiyoyi ko na'urori da ke haɗe da kowane tashar jiragen ruwa.
   GARGADI: Don guje wa haɗarin girgizar lantarki, dole ne a haɗa wannan kayan aikin zuwa na'urar samar da wutar lantarki kawai tare da ƙasa mai kariya.
   Lura: Mai kula yana ƙasa kuma bai kamata a haɗa shi zuwa teburin da ba a ƙasa ba da aka yi niyya don amfani tare da na'ura mai sanyaya ko makamancin haka.
2. Yi gwaje-gwaje masu zuwa akan Mai Kula da daidaitattun ka'idojin hukuma:
   1. 1. Ci gaban ƙasa
      2. Haɗa Blanket ɗin Warming zuwa Mai Sarrafa kuma gwada ɗigogi na halin yanzu don tabbatar da matsakaicin ɗigogi na halin yanzu bai wuce buƙatun da ke cikin Tebu 3 ba.

Lura: Za a iya amfani da madaidaicin ingarma a bayan Mai Kula da ita azaman maƙasudi don waɗannan gwaje-gwajen. Ingantacciyar ingarma shine don sauƙin samun haɗin ƙasa yayin gwajin amincin lantarki. Clip zuwa ingarma yayin gwaji. Bayani: 60601-1 8.6.7

Tebur na 3: Matsakaicin Izinin Fitowar Halin Yanzu
Polarity	Sharadi	Yanzu (mA)
Na al'ada / Juyawa	Na al'ada	0.1
	Bude Kasa	0.5
	Buɗe Neutral	0.5
	Bude Ground & Buɗe Neutral	0.5

1. Yi "Gwajin Aiki" da aka kwatanta akan shafuka masu zuwa.

Hanyar Gwajin Aiki don Mai Gudanarwa

Sanya Mai Sarrafa a Yanayin Gwajin Ganewa ta hanyar kewayawa zuwa Menu na Sabis (Babban Menu>Sabis>Gwajin Gano). Don gudanar da Gwajin Gano, danna maɓallin alamar alamar kore. Jarabawar ba za ta fara ba har sai an cire haɗin duk na'urorin dumama daga Mai sarrafawa. Idan an ga gazawa yayin ɗayan waɗannan matakan, kira Sabis na Abokin Ciniki.
Don tabbatar da aikin Ƙararrawa, Ƙararrawa ya kamata ya yi sauti kusa da ƙarshen gwajin.
Ta IEC 2-35: Gwajin yana tabbatar da cewa yankewar thermal mai zaman kanta (watau firikwensin zafin jiki na sakandare) yana aiki
Lokacin da gwajin da aka samu nasarar kammala, "Passed" zai nuna a kan allon. Idan gwajin bai yi nasara ba, "Ba a yi nasara ba" zai nuna.

Gwajin aiki don Blanket ko katifa da Mai kula

Yi amfani da Dumama Blanket ko katifa don aiwatar da matakan da aka zayyana a ƙasa. Idan an ga gazawa yayin kowane ɗayan waɗannan matakan, maimaita gwaji ta amfani da wata bargo mai dumama daban ko katifa. Idan an ga gazawa tare da Dumama Blanket ko katifa na biyu, tuntuɓi Sabis na Abokin Ciniki

1. Tafi na'urar firikwensin zafin jiki mai daidaitawa, mai saurin amsawa zuwa saman da ke fuskantar majiyyaci na Dumama Blanket ko katifa kai tsaye akan alamar firikwensin.
2. Ninka Blanket ɗin Warming ko katifa baya da kansa (baƙar fuska zuwa baƙar fata a yanayin amfani da Blanket ɗin dumama) ta yadda firikwensin zafin jiki ya kasance a cikin wurin naɗe. Sanya nauyin 750 zuwa 1000g (kamar ƙaramin littafi ko littafin rubutu) akan wurin firikwensin don tabbatar da cewa Na'urar ta ci gaba da naɗewa da kuma cewa akwai kyakkyawar hulɗa tsakanin firikwensin da nadadden Blanket Warming ko katifa.
3. Kunna Maɓallin Wuta na Mais akan Mai Sarrafa zuwa Matsayin ON. Haɗa Kebul ɗin Dumuma ko katifa zuwa Mai Kula. Mai Sarrafa zai fitar da sautin murya lokacin da aka haɗa Blanket ko katifa.
4. Saita Controller zuwa zafin jiki wanda za'a tabbatar. Idan duba duk saiti, fara da ƙananan zafin jiki.
5. Bayan Na'urar ta kai wurin da aka saita (an nuna lokacin da saiti ba ya walƙiya), ba da damar zafin jiki ya daidaita na ƙarin mintuna 10. NOTE: Za a lura da yawan zafin jiki lokacin gwaji ta wannan hanya, wanda yake al'ada.
6. Bayan mintuna 10, karatun akan firikwensin zafin jiki yakamata ya kasance tsakanin +/- 1°C na yanayin saiti. Lokacin auna zafin jiki, daidaito da haƙuri na firikwensin dole ne a yi la'akari da su. Wannan zai dogara da nau'in firikwensin da ake amfani da shi kuma yana iya kewayawa daga +/- 0.2°C zuwa +/- 2.0°C. Dole ne a ƙara juriyar ma'aunin firikwensin zuwa haƙurin +/- 1.0°C don Tsarin don tantance ma'aunin wucewa/ gazawar wannan gwajin. Domin misaliample: Idan an saita Mai Sarrafa zuwa 41°C, kuma ana yin ma'aunin tare da firikwensin zafin jiki wanda ke da juriyar ma'aunin +/- 1.0°C, ƙimar da aka auna na yanayin zafi zai zama 39 zuwa 43°C. (watau 41 +/- 2°C).
7. Maimaita matakai 4-6 don saitin zafin jiki na gaba, idan an buƙata.

Lambobin Kuskuren: Faɗakarwa & Ƙararrawa

• Lokacin da yanayin ƙararrawa ko faɗakarwa ya faru, lambar kuskure mai alaƙa zata kasance akan nuni har sai an warware yanayin.
• Idan yawancin ƙararrawa ko yanayin faɗakarwa sun faru a jere, lambar da ke da alaƙa da mafi girman fifiko yanayin faɗakarwa za a fara nuna shi da farko, sannan kuma ƙararrawa mafi fifiko na gaba ko yanayin faɗakarwa har sai an nuna duk yanayin ƙararrawa ko faɗakarwa ga mai amfani. Da zarar an nuna duk yanayin ƙararrawa ko faɗakarwa, nunin zai dawo zuwa babban allon aiki inda lambobin kuskure za su kasance a kan allo a maimakon wurin saita yanayin zafi.
• Idan sabon yanayin ƙararrawa ko faɗakarwa ya auku, duk ƙararrawa ko faɗakarwa mai aiki za a sake nunawa ga mai amfani wanda aka jera ta fifiko kamar yadda aka bayyana a sama.
• Don warware ƙararrawa, bi umarnin kan allo. Na'urori ba za su yi aiki ba lokacin da ƙararrawa ke faruwa.
• Ƙararrawa "an dakatar da sauti" minti 10 ne, bayan haka sai sauti ya dawo.

Yanayin Kuskuren Faɗakarwa

Lambar

Yanayin Kuskuren Ƙararrawa

Lambar

Rashin daidaituwa	EA		Overcurrent (Tsarin)	E3
Rashin gazawar kayan aikin (secondary circuitry)	EC		Yawan zafin jiki na farko	E1
Rashin Tsarin Tsarin (Rashin Canjin Wuta)	EF		Tashar Tashar Tashar Tasha Ta Yanzu Ta Kai	E3
Hardware I2C gazawar	EH		Sensor ko gazawar Kebul	E4
Rashin wutar lantarki na hardware	EP		Gano Ninke Blanket	E5
Rashin isa ga Temp	E2		Sama da Zazzabi (Na biyu)	E8
An Kashe Yanayin atomatik	E7
Lokacin Kashe atomatik	- (yana komawa yanayin jiran aiki)

Yanayin Kuskuren Ƙararrawa	Lambar	Jinkirin yanayi	Jinkirin Ƙarfafa Sigina (Ƙararrawar Software)	Sigina Jinkirin ƙarni (Ƙararrawar Hardware)
Overcurrent (System) [hardware]	E3	< 1 milli seconds	<200 seconds	< 50 seconds
Babban zafin jiki na farko [software]	E1	15 dakika	<200 seconds	(software kawai; ba zai ƙararrawa ba)
Iyakar Port Current An Isa [hardware]	E3	< 1 milli seconds	<200 seconds	< 50 seconds
Sensor ko gazawar Cable [software]	E4	15 dakika	<200 seconds	(software kawai; ba zai ƙararrawa ba)
Gano Nanne Blanket [software]	E5	15 dakika	<200 seconds	(software kawai; ba zai ƙararrawa ba)
Over Temperatuur TruCore (NA) [hardware]	E6	< 1 milli seconds	Ba a aiwatar da shi ba	< 50 seconds
Sama da Zazzabi (Na biyu) [hardware]	E8	< 1 milli seconds	<200 seconds	< 50 seconds

BAYANI

Na zahiri Halaye
Girma		28 cm tsayi x 17.8 cm zurfi x 22.2 cm faɗi (11 "high x 7" zurfin x 8.75" faɗi)
Nauyi		2.85-3.75 kg (6.3 - 8.3 lbs.) ba tare da cl ba.amp ko igiyoyi

Yin hawa		Ana iya sanya shi akan shimfidar lebur a kwance (watau saman tebur), clamped zuwa sandar IV, ko kuma an rataye shi ta amfani da dutsen VESA na ko dai FDMI MIS-C (35 × 75 mm) ko FDMI MIS-D (75 × 75 mm) ƙayyadaddun bayanai
Zazzabi Halaye
Kula da Zazzabi		Micro-processor
Yanayin Aiki		Tashar jiragen ruwa na Blanket A, B, C, da D ana daidaita su a cikin 1oC karuwa 37° zuwa 43° ± 1.0°C 98.6° zuwa 109.4° ± 1.8°F
		Mattress Port M daidaitacce a cikin 1oC karuwa 35° zuwa 40° ± 1.0°C 95° zuwa 104° ± 1.8°F
Tsarin Tsaro Duk sharuɗɗan ƙararrawa an ƙirƙira su azaman Ƙararrawar Fasaha ta Matsakaici
Ƙararrawa na sauraro		Mafi ƙarancin SPL na 65 dB (A) a 3m (daga gaban mai sarrafawa) tare da baya ƙasa SPL kada ya wuce 55dB (A)
Ƙararrawar Ƙarfafawa na Farko		Tashar jiragen ruwa A, B, C, D (Dumi Dumi) Ƙararrawar Matsakaici na Farko yana yin sauti lokacin da firikwensin zafin jiki ya kasance a wurin saita + 1°C
		Port M (Katifa mai dumi) Ƙararrawar Matsakaici na Farko yana sauti lokacin da firikwensin zafin jiki a saita wuri + 1°C
Ƙararrawar Ƙarfafawar Tsanani na Sakandare		Tashar jiragen ruwa A, B, C, D (Dumi Dumi) Da'irar lantarki mai zaman kanta tana kashe na'urar zafi idan firikwensin zafin jiki na Blanket Warming ya kai madaidaicin wurin saita + 3°C. (46°C) Matsakaicin ƙararrawar fifiko. Port M (Katifa mai dumi) Da'irar lantarki mai zaman kanta tana kashe dumama idan firikwensin zafin jiki na Katifa ya kai madaidaicin saiti ± 2.5°C (42.5°C) Matsakaicin ƙararrawar fifiko.
Iyakoki na yau da kullun		Ƙararrawar Farko na Matsakaici yana ƙara sama da yanayin yanzu. Tsarin yana amfani da rabon wutar lantarki lokacin da tashoshin jiragen ruwa da yawa ke zana halin yanzu akan matakan tsarin.
Tsarin Kariya na yau da kullun		Layukan shigar guda biyu masu haɗaka. Ƙararrawar Matsakaici Farko
Lantarki Halaye
Leakage Yanzu		Haɗu da UL 60601-1 da IEC 60601-1 buƙatun don Class I, Nau'in kayan aikin BF.
Amfanin Wuta		Matsakaicin 850W
Igiyar Wutar Lantarki		4.6 m (15 ft) - Yana iya bambanta ta ƙasa da yanki ta kowane buƙatun gida da ƙa'idodi.
Ƙididdigar Na'ura		Shigarwa: 100-240 VAC, 50/60 Hz, 850VA Fitowar A, B, C, D: 48 VDC, 480 VA Max kowane fitarwa M: 336 VA Max
Fuses		T10AL250V (2 x 5x20mm)
Muhalli Sharuɗɗa
Yanayin Muhalli don Sufuri da Ajiyewa		Zazzabi: -20 ° C zuwa 60 ° C Humidity: 20% zuwa 80% Ci gaba da bushewa

Yanayin Muhalli don Amfani		Zazzabi: 15°C zuwa 25°C Danshi: 20% zuwa 80%
Bayanin Fasaha na PCLCS (tsarin rufaffiyar madauki na physiologic) - Yanayin AUTO - ta IEC 60601-1-10 ed. 1.1
Bayanin Rakiya Daga Table C.3			Cikakkun bayanai masu mahimmanci don amintaccen amfani da PCLCS RARRABA 6.4		NA – Ba PCLCS da aka rarraba ba
			Takaitacciyar hanyoyin PCLC na aiki da ƙayyadaddun bayanai na Amsoshin PCLCS 8.2.2.6		Duba Table 2 a IFU
			Yana nufin duba martanin PCLCS 8.2.2.6		Idan zafin jiki na majiyyaci yana waje da kewayon al'ada, yanayin AUTO ya rabu kuma an fara faɗakarwar E7.
Rabewa kuma Matsayi
Takaddun shaida		IEC 60601-1; EN 60601-1-2; UL 60601-1; CAN/CSA-C22.2, No. 601.1, EN 55011
Rabewa		Ƙarƙashin ƙa'idodin IEC 60601-1 (da sauran nau'ikan Jagororin na ƙasa) azaman Class I, Nau'in BF, Kayan aiki na yau da kullun, Aiki na ci gaba. Bai dace da amfani ba a gaban gaurayawan maganin sa barci mai ƙonewa tare da iska ko tare da oxygen ko nitrous oxide. Rarraba ta Sabis na Gwajin EUROLAB NA Inc. dangane da girgiza wutar lantarki, wuta, da hatsaran inji kawai, daidai da UL 60601-1. Rarraba ƙarƙashin Dokokin Na'urar Likitan Turai 2017/745 azaman na'urar Class IIb. Rarraba ƙarƙashin Dokar Na'urar Likitan Kanada azaman Class II.
Bincike		Kwararren masani na iya yin gwajin tsarin gaba ɗaya. Mai Sarrafa ba shi da sassan sabis masu amfani.
Muhimman Bayanai		Wannan na'urar ta bi ka'idodin EMC bisa ga IEC 60601-1-2. Kada a yi amfani da kayan aikin watsa rediyo, wayoyin hannu, da sauransu a cikin kusancin na'urar tunda hakan na iya yin tasiri ga ayyukan na'urar. Dole ne a yi la'akari da taka tsantsan yayin amfani da tushe mai ƙarfi kamar kayan aikin tiyata mai ƙarfi da makamantansu ta yadda, misali, kebul na HF ba a kunna ko kusa da na'urar ba. Idan kuna shakka, tuntuɓi ƙwararren masani ko wakilin ku na gida.
Rayuwar da ake tsammani		Shekaru 10 daga Ranar Ƙirƙira
Mahimmanci Ayyuka
		1. Idan ɓangaren da aka yi amfani da shi ba zai iya isa wurin da aka saita ba a cikin mintuna 10, na'urar dumama za ta kashe kuma za a samar da faɗakarwar fasaha mai ƙarancin fifiko. 2.  Mafi ƙarancin watt ɗin dumama zai isa don cimma ɗumamar tasiri na asibiti (0.10 watts a kowace murabba'in inch (155 watts a kowace murabba'in mita)) 3.  Matsakaicin yawan watt na hita zai zama ƙasa da watts 0.45 a kowace murabba'in inch (620 watts a kowace murabba'in mita) 4.  Fuskokin hulɗar mara lafiya na Tsarin HotDog zai yi aiki a wurin da aka saita +/- 5°C a tsayayyen yanayin lokacin da na'urar ke ƙarƙashin nauyin zafi. 5.   Ƙarfin ajiya na thermal na ɓangaren da aka yi amfani da shi zai zama ƙasa da 100% na ƙarfin wutar lantarki   6.  A cikin yanayi na al'ada ko kuskure ɗaya, na'urar dumama kada ta ɗaga zafin fata sama da 43°C. Idan yanayin zafin fata ya wuce 43 ° C, za su kasance a cikin iyakokin lokaci/zazzabi masu zuwa:
				Lokaci (s)		Zazzabi (C)
				10000		43.5
				6000		44
				3300		44.5
				1990		45
				1000		45.5
				600		46
				350		46.5
				225		47
				110		47.5
				80		48
				60		48.5
				38		49
				28		49.5
				22		50
				17		50.5

GASKIYAR GASKIYA (EMC)

Tsarin yana buƙatar taka tsantsan na musamman game da EMC kuma dole ne a shigar dashi kuma a saka shi cikin sabis bisa ga bayanin EMC da aka bayar a cikin wannan Jagorar Mai Amfani.

Gargaɗi ga daidaitattun IEC 1-2:

• Ya kamata a guji amfani da wannan kayan aiki kusa da ko tara tare da wasu kayan aiki saboda zai iya haifar da aiki mara kyau. Idan irin wannan amfani ya zama dole, wannan kayan aiki da sauran kayan aikin yakamata a kiyaye su don tabbatar da cewa suna aiki akai-akai.
• Amfani da na'urorin haɗi, transducers, da igiyoyi ban da waɗanda aka ƙayyade ko samar da wannan kayan aikin na iya haifar da ƙara yawan iskar lantarki ko rage rigakafi na lantarki na wannan kayan aiki kuma yana haifar da rashin aiki mara kyau.
• Ya kamata a yi amfani da kayan sadarwar RF mai ɗaukuwa (gami da na'urori kamar igiyoyin eriya da eriya na waje) ba kusa da 30 cm (inci 12) zuwa kowane ɓangare na WC7X, gami da kebul ɗin da masana'anta suka ƙayyade. In ba haka ba, lalacewar aikin wannan kayan aiki na iya haifar da lalacewa.

Bayanin Jagora da Mai ƙera - Fitar da Electromagnetic
An yi nufin Tsarin Gudanar da Zazzabi HotDog™ don amfani a cikin yanayin lantarki da aka kayyade a ƙasa. Abokin ciniki ko mai amfani da Tsarin Gudanar da Zazzabi na HotDog yakamata ya tabbatar da cewa ana amfani dashi a cikin irin wannan yanayi.
Fitarwa gwadawa	Biyayya	Muhallin lantarki – Jagoranci
Fitowar RF, CISPR 11	Rukuni na 1	Tsarin Gudanar da Zazzabi HotDog yana amfani da kuzarin RF kawai don sa aiki na ciki. Don haka, fitar da RF ɗin sa yana da ƙasa sosai kuma ba zai iya haifar da tsangwama a cikin kayan lantarki na kusa ba.
Fitowar RF, CISPR 11	Darasi A	NOTE Halayen EMISSIONS na wannan kayan aikin sun sa ya dace don amfani a yankunan masana'antu da asibitoci (CISPR 11 class A). Idan ana amfani da shi a cikin wurin zama (wanda CISPR 11 ajin B yawanci ake buƙata) wannan kayan aikin bazai ba da cikakkiyar kariya ga sadarwar mitar rediyo ba. ayyuka. Mai amfani na iya buƙatar ɗaukar matakan ragewa, kamar ƙaura ko sake daidaita kayan aiki.
Abubuwan da suka dace, IEC 61000-3-2	Darasi A
Voltage sauye-sauyen hayaki, IEC 61000-3-3	Ya bi

 

Bayanin Jagora da Mai ƙirƙira - Kariyar lantarki
An yi nufin Tsarin Gudanar da Zazzabi HotDog™ don amfani a cikin yanayin lantarki da aka kayyade a ƙasa. Abokin ciniki ko mai amfani da Tsarin Gudanar da Zazzabi na HotDog yakamata ya tabbatar da cewa ana amfani dashi a cikin irin wannan yanayi.
Kariya Gwaji	Saukewa: IEC60601 Matsayin Gwaji	Biyayya Mataki	Electromagnetic Muhalli – Jagoranci
Fitar da Electrostatic (ESD) IEC 61000-4-2	± 2, 4, 8 kV lamba ± 2, 4, 8, 15 kV iska	± 2, 4, 8 kV lamba ± 2, 4, 8, 15 kV iska	Ya kamata benaye su zama itace, siminti ko tayal yumbu. Idan an rufe benaye da kayan roba, yanayin zafi ya kamata ya zama aƙalla 30%.
Wutar lantarki mai saurin wucewa/ fashewa IEC 61000-4-4	± 2 kV don layin samar da wutar lantarki ± 1 kV don shigarwa / fitarwa layuka	± 2 kV don layin samar da wutar lantarki ± 1 kV don shigarwa / fitarwa layuka	Ingancin wutar lantarki ya kamata ya zama na yanayin kasuwanci ko na asibiti.
Surge Saukewa: IEC61000-4-5	Line 1 kV layi (s) zuwa layi (s) Layin (s) 2 kV zuwa duniya	Line 1 kV layi (s) zuwa layi (s) Layin (s) 2 kV zuwa duniya	Ingancin wutar lantarki ya kamata ya zama na yanayin kasuwanci ko na asibiti.

Voltage dips, gajeriyar katsewa da voltage bambancin akan layukan shigar da wutar lantarki Saukewa: IEC61000-4-11	0% UT don sake zagayowar 0,5 (0-315° tare da 45° karuwa) 0% UT (100 % shiga cikin UT) don 1 hawan keke 70% UT (30 % shiga cikin UT) don zagayowar 25/30 0 % UT (100 % shiga cikin UT) na dakika 5	0% UT don sake zagayowar 0,5 (0-315° tare da 45° karuwa) 0% UT (100 % shiga cikin UT) don 1 hawan keke 70% UT (30 % shiga cikin UT) don 25/30 hawan keke 0% UT (100 % shiga cikin UT) na dakika 5	Ingantaccen ƙarfin wutar lantarki yakamata ya zama na na hali muhallin kasuwanci ko asibiti. Idan mai amfani da Tsarin Gudanar da Zazzabi na HotDog yana buƙatar ci gaba da aiki yayin katsewar wutar lantarki, ana ba da shawarar cewa Tsarin Gudanar da Zazzabi na HotDog ya kasance mai ƙarfi daga Wutar lantarki mara yankewa ko batir.
Mitar wutar lantarki 50/60 Hz) filin maganadisu Saukewa: IEC61000-4-8	30 A/m	30 A/m	Yakamata filayen maganadiso su kasance a matakan halayen wuri na yau da kullun muhallin kasuwanci ko asibiti.
NOTE UT shine ac mains voltage kafin aikace-aikacen matakin gwajin.

Bayanin Jagora da Mai ƙirƙira - Ƙirar wutar lantarki (ci gaba)
An yi nufin Tsarin Gudanar da Zazzabi HotDog™ don amfani a cikin yanayin lantarki da aka kayyade a ƙasa. Abokin ciniki ko mai amfani da Tsarin Gudanar da Zazzabi na HotDog yakamata ya tabbatar da cewa ana amfani dashi a cikin irin wannan yanayi.
Kariya Gwaji	Saukewa: IEC60601 Matsayin Gwaji	Biyayya Mataki	Electromagnetic Muhalli – Jagoranci
			Ya kamata a yi amfani da kayan sadarwar RF mai ɗaukuwa da wayar hannu ba kusa da kowane ɓangare na Tsarin Gudanar da Zazzabi na HotDog, gami da igiyoyi, fiye da shawarar nisan rabuwa da aka ƙididdige su daga ma'aunin da ya dace da mitar mai watsawa.
			Nasiha rabuwa nisa
			d = 1,2 P
			d = 0,35 P 80 MHz zuwa 800 MHz
RF IEC 61000-4-6     Rated RF IEC 61000-4-3	3 Vrms tare da 6 Vrms a cikin tashoshin ISM 150 kHz zuwa 80 MHz     10V/m 80 MHz zuwa 2,7 GHz	3 V, da kuma 6 Vrms         10V/m	d = 0,7 P 800 MHz zuwa 2,5 GHz ina P shine matsakaicin ƙimar ƙarfin fitarwa na mai watsawa a cikin watts (W) bisa ga masana'antar watsawa kuma d shine shawarar nisan rabuwa a cikin mita (m). Ƙarfin filin daga ƙayyadaddun masu watsa RF, kamar yadda aka ƙaddara ta hanyar binciken rukunin yanar gizo na lantarki, ya kamata ya zama ƙasa da matakin yarda a kowane kewayon mitar.b Tsangwama na iya faruwa a kusa da kayan aikin da aka yiwa alama da alama mai zuwa:
NOTE 1 A 80 MHz da 800 MHz, mafi girman kewayon mitar ya shafi. NOTE 2 Waɗannan jagororin bazai aiki a kowane yanayi ba. Yadawar lantarki yana shafar sha da tunani daga sifofi, abubuwa da mutane.
Ƙarfin filin daga ƙayyadaddun masu watsawa, kamar tashoshin tushe don wayoyin rediyo (hanyar salula/marasa igiya) da radiyon wayar hannu na ƙasa, rediyo mai son, watsa shirye-shiryen rediyo na AM da FM da watsa shirye-shiryen TV ba za a iya annabta bisa ƙa'ida ba tare da daidaito. Don tantance electromagnetic yanayi saboda ƙayyadaddun masu watsa RF, ya kamata a yi la'akari da binciken rukunin yanar gizo na lantarki. Idan ƙarfin filin da aka auna a cikin wurin da ake amfani da Tsarin Gudanar da Zazzabi na HotDog ya wuce matakin yarda da RF da ya dace a sama, ya kamata a lura da Tsarin Gudanar da Zazzabi na HotDog don tabbatar da aiki na yau da kullun. Idan an ga aikin da ba na al'ada ba, ƙarin matakan na iya zama dole, kamar sake daidaitawa ko ƙaura Tsarin Gudanar da Zazzabi na HotDog. b Sama da kewayon mitar 150 kHz zuwa 80 MHz, ƙarfin filin yakamata ya zama ƙasa da 3 V/m.

Shawarar nisan rabuwa tsakanin kayan sadarwar RF mai ɗaukuwa da wayar hannu da Tsarin Gudanar da Zazzabi na HotDog
Tsarin Gudanar da Zazzabi na HotDog an yi niyya don amfani a cikin yanayin lantarki wanda a cikinsa ake sarrafa hargitsi na RF. Abokin ciniki ko mai amfani da Tsarin na iya taimakawa hana tsangwama na lantarki ta hanyar kiyaye mafi ƙanƙanta nisa tsakanin kayan sadarwar RF mai ɗaukuwa da wayar hannu (masu watsawa) da Tsarin kamar yadda aka ba da shawarar ƙasa, gwargwadon matsakaicin ƙarfin fitarwa na kayan aikin sadarwa.
Matsakaicin ƙarfin fitarwa na watsawa W	Nisan rabuwa bisa ga mitar watsawa m
	150 kHz zuwa 80 MHz d = 1,2 P	80 MHz zuwa 800 MHz d = 0,35 P	800 MHz zuwa 2,5 GHz d = 0,7 P
0,01	0,12	0,04	0,07
0,1	0,37	0,11	0,22
1	1,2	0,35	0,70
10	3,7	1,1	2,2
100	12	3,5	7,0
Don masu aikawa da aka ƙididdige su a matsakaicin ƙarfin fitarwa da ba a jera su a sama ba, shawarar nisan rabuwa d a cikin mita (m) ana iya ƙididdigewa ta amfani da ma'aunin da ya dace da mitar mai watsawa, inda P shine matsakaicin ƙimar ƙarfin fitarwa na mai watsawa a cikin watts (W) bisa ga masana'antar watsawa. NOTE 1 A 80 MHz da 800 MHz, nisan rabuwa don mafi girman kewayon mitar ya shafi. NOTE 2 Waɗannan jagororin bazai aiki a kowane yanayi ba. Yadawar lantarki yana shafar sha da tunani daga sifofi, abubuwa da mutane.

© 2021 Augustine Surgical, Inc. Duk haƙƙin mallaka.

Tuntuɓar Sabis na Abokin ciniki

Waya: +1-952-465-3500
Imel: CS@AugSurg.com
HotDog alamar kasuwanci ce ta Gudanar da Zazzabi na Augustine, mai rijista a Ofishin Samar da Alamar kasuwanci ta Amurka. Ana kiyaye na'urori da wasu ko duk waɗannan haƙƙoƙin masu zuwa: (Patents na Amurka 7,543,344; 7,714,255; 7,851,729; 7,786,408; 8,062,343; 8,283,602; 8,604,391, 8,624,164; 8,772,676; 8,986,359, 9,962,122; 9,668,303; 10,154,543; 10,201,935; 10,206,248; 10,506,668; 2,062,460; XNUMX; PCT Patent EP XNUMX).
Wasu haƙƙin mallaka suna jiran.

Takardu / Albarkatu

HOTDOG WC7X Mai Kula da Zazzabi [pdf] Jagorar mai amfani WC7X Mai Kula da Zazzabi Mai Kula da Zazzabi, WC7X, Mai Gudanar da Zazzabi, Mai Gudanarwa, Mai Sarrafa

Magana

• Manual mai amfani