HomeSeer Z-NET Interface Network Controller

Taya murna kan siyan Z-NET IP ɗin mu mai amfani da fasahar Z-Wave. Z-NET ya haɗa sabuwar fasahar "Z-Wave Plus", tana goyan bayan Network Wide Inclusion (NWI) kuma ana iya shigar da ita a duk inda ake samun haɗin cibiyar sadarwa ta amfani da Ethernet ko WiFi, Z-NET Da fatan za a bi matakan da ke ƙasa don shigarwa kuma saita naku. naúrar.
Idan kuna haɓakawa daga wani keɓancewa (Z-Troller, Z-Stick, da sauransu) zuwa Z-NET, kammala duk matakai. Idan kuna gina hanyar sadarwar Z-Wave daga karce, tsallake MATAKI #2 da MATAKI #5. **Mataki na 2 da 5 basa aiki akan AU, EU, ko UK Z-NETs**

Abubuwan Shigarwa

Ko da yake Z-Wave fasaha ce ta "cibiyar sadarwa" wacce ke bin umarni daga wannan na'ura zuwa waccan, mafi kyawun aiki yana samuwa ta hanyar shigar da Z-NET tare da haɗin Ethernet mai waya kusa da tsakiyar gida. Hanyoyin haɗin waya a wasu wurare na gida na iya haifar da kyakkyawan sakamako amma yawanci zai gabatar da ƙarin sigina. Idan haɗin waya ba zai yiwu ba, yi la'akari da amfani da ginanniyar adaftar WiFi. Ayyukan WiFi zai bambanta dangane da ingancin na'ura mai ba da hanya tsakanin hanyoyin sadarwa da mara waya "profile" na gidan ku. Idan kun fuskanci matsalolin WiFi tare da na'urar wayar hannu a cikin gidanku, misaliampDon haka, kuna iya fuskantar matsaloli tare da Z-NET akan WiFi.

Haɗin Cibiyar Sadarwa (NWI) fasaha ce da ke ba Z-NET damar ƙara ko share na'urori zuwa/daga cibiyar sadarwar ku ta Z-Wave a cikin dogon zango. Wannan yana sauƙaƙa tsarin kafa yawancin cibiyoyin sadarwa. Koyaya, NWI kawai za ta yi aiki tare da sabbin na'urorin Z-Wave, waɗanda ke da v4.5x ko 6.5x Z-Wave firmware (ZDK) shigar. Ƙara/share tsofaffin na'urori zai buƙaci Z-NET da na'urar a sanya su a tsakanin 'yan ƙafafu na juna. A cikin waɗannan lokuta, ginanniyar adaftar WiFi a ciki yana ba da damar Z-NET a sake mayar da shi cikin sauƙi. Duk na'urar da aka yiwa alama da tambarin Z-Wave+ tana goyan bayan NWI. Yawancin na'urorin da ake samu a yau sun dogara ne akan aƙalla 4.5x ZDK kuma za su goyi bayan NWI duk da cewa ba a yi musu alama da tambarin Z-Wave + ba.

MATAKI #1 ­ Sabunta HS3 Z-Wave Plug-in

1. Z-NET yana buƙatar HS3 Z-Wave plug-in v3.0.0.196 (ko mafi girma). Zazzage kuma shigar da sabon filogi daga mai sabuntar ku na HS3. Bincika sashin "Beta" na sabuntawa (a kasan jeri) don nemo sabuwar plug-in Z-Wave.

MATAKI #2 ­ Ajiye hanyar sadarwa ta Z-Wave na yanzu (Sai idan haɓakawa daga wani ƙirar Z-Wave)

1. Bude HS3 ku web dubawa, kewaya zuwa Plug-ins>Z-Wave>Gudanar da Mai Gudanarwa, fadada jeri don dubawar ku, sannan zaɓi "Ajiye wannan dubawar" daga menu na Ayyuka.
2. Sake suna madadin file (idan ana so) kuma danna maɓallin START (kamar yadda aka nuna a ƙasa). Aikin ya kamata ya ɗauki ƴan daƙiƙa kaɗan kawai kuma kalmar "An gama" zata bayyana idan an gama. Ka lura da sunan wannan file don daga baya.
   
3. Kewaya zuwa Plug-ins>Z-Wave>Gudanar da Mai Gudanarwa, kuma musaki abin dubawa ta danna alamar alamar kore a hannun dama na sunan dubawa. Da'irar rawaya da ja da aka ketare za ta bayyana, da zarar an kashe mu'amala (kamar yadda aka nuna a nan).
   
4. Share abin dubawa daga software ta danna maɓallin sharewa a ƙarƙashin sunan dubawa. Dole ne ku yi wannan don guje wa rikice-rikice na "ID na gida" tare da Z-NET. KAR KU TSALLAKE WANNAN MATAKI KUMA KAR KU SHAFE INTERFACE DINKU!
5. A zahiri cire haɗin haɗin haɗin da ke akwai daga tsarin ku.
   a. Z-Troller: Cire haɗin wutar lantarki ta AC da kebul na serial. Cire batura.
   b. Z-Stick: Cire sandar daga tashar USB. Idan hasken yanayin shuɗi yana kiftawa, sannan danna maɓallin sarrafawa sau ɗaya.
   
6. Ajiye keɓantawar da ke akwai a wuri mai aminci. Ana iya amfani da wannan azaman madadin idan Z-NET ɗinku ya taɓa kasawa.

MATAKI #3 - Kanfigareshan hanyar sadarwa

1. Shigarwa na Jiki: Haɗa Z-NET zuwa cibiyar sadarwar ku ta gida (LAN) tare da kebul na Ethernet da aka kawo kuma kunna naúrar tare da haɗa adaftar wuta. Alamar LED zata kiftawa ja na kusan dakika 20, sannan tayi haske ja.
2. Shiga Z-NET: Yin amfani da PC, kwamfutar hannu ko waya, buɗe mai bincike kuma shigar sami.homeseer.com a cikin URL layi. Sannan danna maballin "search". A mafi yawan lokuta, za ku ga shigarwar guda biyu; daya don HomeTroller (ko tsarin software na HS3) da ɗaya don Z-NET ɗin ku. Za a sami zaɓi na uku idan kuna amfani da adaftar WiFi a ciki, sannan zaku ga shigarwa ta uku (kamar yadda aka nuna a ƙasa). Danna madaidaicin adireshin IP a cikin ginshiƙin tsarin don samun damar saitunan Z-NET ɗinku.
3. Ana ɗaukaka Z-NET: Idan ana samun sabuntawar Z-NET, danna maɓallin “Update” a kusurwar hannun dama na sama (kamar yadda aka nuna a ƙasa). Sabuntawa yakamata ya ɗauki ɗan lokaci kawai don shigarwa. Hakanan zaka iya sake suna naúrar, idan kuna so. Idan kana amfani da fiye da 1 Z-NET, la'akari da hada da wurin naúrar a cikin sunan (Zane na Farko Z-NET, don misaliample). Tabbatar ƙaddamar da canje-canjen ku idan an yi.
4. MUHIMMI: Kamar yadda aka aika, Z-NET za ta karɓi adireshin IP da aka sanya ta hanyar sadarwa ta hanyar amfani da "DHCP". Ga yawancin masu amfani, wannan shine kawai abin da ake buƙata, kamar yadda HomeTroller ko HS3 tsarin software za su gano Z-NET ta atomatik. Kuna iya tsallakewa zuwa yanzu MATAKI #4. Koyaya, idan kuna son sanya adireshin IP na dindindin zuwa Z-NET naku ko kuma idan Z-NET ɗin ku yana kan wata hanyar sadarwa daban fiye da tsarin ku na HS3, kammala sauran matakai a wannan sashe.
   
5. NAZARI: Saita Adireshin IP na dindindin (a tsaye): Kamar yadda aka aika, Z-NET za ta karɓi adireshin IP da aka sanya ta hanyar sadarwa ta hanyar amfani da "DHCP". Koyaya, zaku iya sanya adireshin IP na dindindin zuwa Z-NET idan ana so. Amfani ko dai na waɗannan hanyoyin don cim ma wannan don haɗin yanar gizon ku da/ko mara waya.
   
   a. Yi amfani da saitunan Z-NET: Danna maɓallin rediyo don "Static-IP" kuma shigar da adreshin IP ɗin da kuka zaɓa. Ya kamata ku zaɓi adireshin da ke cikin rukunin yanar gizon ku amma a wajen kewayon DHCP. Wannan zai guje wa rikici tare da na'urorin DHCP akan hanyar sadarwa. Ajiye saitunan ku kuma ZNET zai sake yin aiki.
   b. Yi Amfani da Adana Adireshin na'ura mai ba da hanya tsakanin hanyoyin sadarwa: Yawancin masu amfani da hanyar sadarwa sun haɗa da fasalin ajiyar adireshin IP wanda ke ba da damar na'ura mai ba da hanya tsakanin hanyoyin sadarwa don sanya takamaiman adiresoshin IP dangane da adireshin MAC na na'ura. Don amfani da wannan fasalin, barin saitunan cibiyar sadarwar ZNET akan DHCP amfani shigar da "Adireshin MAC" da adireshin IP (kamar yadda aka nuna a dama) cikin saitunan ajiyar adireshin na'ura mai ba da hanya tsakanin hanyoyin sadarwa. Sake yi na'ura mai ba da hanya tsakanin hanyoyin sadarwa. Daga wannan gaba, na'ura mai ba da hanya tsakanin hanyoyin sadarwa koyaushe zai sanya adireshin IP iri ɗaya zuwa Z-NET.

MATAKI #4 - HS3 / Z-NET Kanfigareshan

1. Yin amfani da PC, kwamfutar hannu ko waya, buɗe mai bincike kuma shigar sami.homeseer.com a cikin URL layi. Sannan danna maballin "search". Lokacin da sakamakon ya bayyana, danna mahaɗin adireshin IP a cikin ginshiƙi na tsarin don samun dama ga tsarin software na HomeTroller ko HS3.
2. Kewaya zuwa Plug-ins>Z-Wave>Gudanar da Mai Gudanarwa, kuma danna maɓallin "Ƙara Interface".
   a. Idan kai Z-NET yana da adireshin IP da aka sanyawa DHCP, shigar da suna don Z-NET ɗin ku kuma zaɓi "Z-NET Ethernet" daga menu na Model na Interface. Sa'an nan zabi your dubawa daga drop down list. Idan kana amfani da adaftar WiFi, zaku ga shigarwar guda 2 (kamar yadda aka nuna a ƙasa). Hakanan, idan kun shigar da Z-NET da yawa, zaku ga shigarwa ga kowane.
   b. IIdan kai Z-NET yana da adireshin IP na dindindin (a tsaye)., shigar da suna don Z-NET ɗin ku kuma zaɓi "Interface Interface" daga menu na Model na Interface. Sannan shigar da adireshin IP na Z-NET da tashar jiragen ruwa 2001 (kamar yadda aka nuna a kasa). Idan kana haɗi zuwa Z-NET akan intanit, yi amfani da adireshin IP na WAN na wannan wurin kuma tabbatar da tura tashar jiragen ruwa 2001 zuwa Z-NET naka a cikin na'ura mai ba da hanya tsakanin hanyoyin sadarwa a wannan wurin.
   
3. A ƙarshe, danna maɓallin "nakasasshe" rawaya da ja don kunna sabon Z-NET na ku. Maballin “kunna” kore ya kamata yanzu ya bayyana (kamar yadda aka nuna a ƙasa)
   
4. An tsara alamar LED akan Z-NET don haskakawa GREEN lokacin da HS3 ya haɗa cikin nasara zuwa gare ta. Duba naúrar a gani don tabbatar da an haɗa Z-NET ɗin ku.
5. Idan kana gina hanyar sadarwar Z-Wave daga karce, koma zuwa HomeTroller ko takaddun HS3 don bayani kan saita hanyar sadarwar Z-Wave da tsallake MATAKI #5. Idan kuna haɓakawa daga wata hanyar sadarwa, ci gaba zuwa MATAKI #5.

MATAKI #5 - Mayar da hanyar sadarwa ta Z-Wave zuwa Z-NET (Sai idan haɓakawa daga wani ƙirar Z-Wave)

1. Bude HS3 ku web dubawa, kewaya zuwa Plug-ins>Z-Wave>Gudanar da Mai Gudanarwa, fadada lissafin sabon ZNET ɗin ku, sannan zaɓi "Mayar da hanyar sadarwa zuwa wannan Interface" daga menu na Ayyuka.
2. Zabi na file ka ƙirƙira baya a MATAKI #2, tabbatar da fara mayar. Za a rubuta bayanan cibiyar sadarwar ku na Z-Wave zuwa Z-NET ɗin ku. Danna maɓallin "Rufe" lokacin da aka gama wannan aikin.
3. A wannan gaba, Z-NET ya kamata ya iya sarrafawa na'urori kawai waɗanda ke cikin kewayon kai tsaye, Tun da ba a haɗa tebur ɗin ba a cikin aikin madadin/dawowa. Don tabbatar da wannan, buɗe menu na Ayyuka kuma zaɓi Gwada Haɗin Node akan hanyar sadarwa, sannan danna Fara. Ya kamata ku ga cakuda "an yi nasarar tuntuɓar" da "bai amsa ba” saƙon, sai dai idan duk nodes ɗin suna cikin kewayon Z-NET kai tsaye.
4. Sake Gina Teburin Hanya: Bude menu na Ayyuka kuma zaɓi Inganta hanyar sadarwa, Babu Canje-canjen Hanyar Komawa sa'an nan kuma danna farawa. Wannan zai fara aiwatar da aikin sake gina tebur ɗin ku, kumburi ɗaya a lokaci guda. Wannan na iya ɗaukar ɗan lokaci don kammalawa, ya danganta da girman cibiyar sadarwar ku. Muna ba da shawarar gudanar da wannan aikin aƙalla sau biyu don gina ingantaccen hanyar sadarwa.
5. Ƙara hanyoyin dawowa: Bude menu na Ayyuka kuma zaɓi Cikakken Inganta hanyar sadarwa. Wannan zai kammala aikin gina teburin tuƙi ta hanyar ƙara hanyoyin dawowa daga na'urorinku zuwa Z-NET.

Shigar da hanyar sadarwa mai nisa

Yana yiwuwa tsarin HomeSeer don sadarwa tare da raka'a Z-NET da aka sanya akan cibiyoyin sadarwa daban-daban. Don cim ma wannan, bi waɗannan matakan.

1. Bi hanya a cikin MATAKI #3 sama don saita Z-NET akan hanyar sadarwar nesa.
2. Saita dokar isar da tashar jiragen ruwa a cikin na'ura mai ba da hanya tsakanin hanyoyin sadarwa don tura tashar jiragen ruwa 2001 zuwa Z-NET mai nisa.
3. Idan an saita cibiyar sadarwar nesa azaman adireshi na IP na WAN a tsaye tsallake zuwa saiti na gaba. In ba haka ba, biyan kuɗi zuwa sabis na DNS mai ƙarfi don ƙirƙirar sunan yankin WAN don cibiyar sadarwar nesa.
4. Bi hanya a cikin MATAKI #4 a sama don saita tsarin HS3 ɗin ku don sadarwa tare da Z-NET mai nisa.
   Koyaya, yi waɗannan canje-canje:
   a. Canza Model Interface ku Ethernet Interface
   b. Shigar da WAN IP address or DDNS domain name na nesa na cibiyar sadarwa a cikin Adireshin IP filin.
   c. Shiga cikin 2001 Lambar tashar jiragen ruwa filin da kunna dubawa.

Lura: Saitin hanyar sadarwa na Z-Wave mai nisa zai buƙaci cim ma daga WURI mai nisa ta amfani da ayyukan sarrafa tsarin HomeSeer. Tabbatar kun ba da damar shiga nesa na tsarin HomeSeer ɗin ku don yin hakan

Sake saita saitunan hanyar sadarwa

1. Haɗa keyboard zuwa naúrar kuma sake kunna Zee S2.
2. Lokacin da hasken ya juya rawaya danna `r' (ƙananan akwati) sannan danna Shigar.
3. Idan haske ya zama shuɗi, an yi nasarar sake saita saitunanku.

Shirya matsala Z-NET

Duk abokan ciniki suna karɓar tallafin tebur mara iyaka (helpdesk.homeseer.com) da Tallafin Waya na fifiko (603-471-2816) na kwanaki 30 na farko. KYAUTA tushen al'umma Allon saƙo (board.homeseer.com) akwai tallafi 24/7.

Alama	Dalili	Magani
LED nuna alama ba zai haske	Adaftar wutar AC ba a girka ko shigar da shi ba.	Tabbatar an shigar da adaftar wutar AC kuma an toshe a ciki.
	Adaftar Wutar AC ta Kasa	Tuntuɓi tallafin HomeSeer
Alamar LED tana haskaka da ƙarfi ja amma ba zai canza zuwa kore ba	Z-NET ba zai iya sadarwa tare da HomeTroller ko tsarin software na HS3 ba	Tabbatar cewa an shigar da plug-in Z-Wave v3.0.0.196 ko kuma daga baya
		Tabbatar cewa an kunna Z-NET kuma an shigar da saitunan adireshin IP da lambar tashar jiragen ruwa 2001 da kyau akan mai sarrafa HS3 mgmt. shafi
		Tuntuɓi tallafin HomeSeer
Duk Sauran Matsalolin		Tuntuɓi tallafin HomeSeer

Wannan samfurin yana aiki ko aiwatar da wasu fasalulluka da/ko hanyoyin Haƙƙin mallaka na Amurka masu zuwa: Lambobin ikon mallakar Amurka. 6,891,838, 6,914,893 da 7,103,511.

Fasahar HomeSeer
10 Kasuwancin Kasuwancin Arewa, Rukuni #10
Bedford, NH 03110
www.homeseer.com
603-471-2816

Takardu / Albarkatu

HomeSeer Z-NET Interface Network Controller [pdf] Jagoran Shigarwa Z-NET, Interface Network Controller

Magana

• Manual mai amfani