HK INSTRUMENTS RHT-MOD-Series Masu watsa Humidity 

Jagoran Jagora

GABATARWA

Na gode don zaɓar jerin HK Instruments RHT-MOD mai watsa zafi. An yi nufin jerin RHT-MOD don amfani a ciki
yanayin kasuwanci a cikin aikace-aikacen HVAC/R.

RHT-MOD yana auna yanayin zafi (rH), da zafin jiki (T).
RHT-MOD na'urorin suna samuwa tare da babban allon taɓawa suna yin daidaitawar na'urar cikin sauri da sauƙi

GARGADI

• KARANTA WADANNAN UMARNI A HANKALI KAFIN YI yunƙurin sanyawa, Aiki ko HIDIMAR WANNAN
  NA'URA.
• Rashin kula da bayanan aminci da bin umarni na iya haifar da RUNUWA, MUTUWA DA/KO ILLAR DUKIYA.
• Don gujewa girgiza wutar lantarki ko lalata kayan aiki, cire haɗin wuta kafin sakawa ko yin hidima kuma yi amfani da wayoyi kawai tare da ƙima don cikakken na'urar aiki vol.tage.
• Don guje wa yuwuwar wuta da/ko fashewa kar a yi amfani da shi a cikin yuwuwar ƙonewa ko fashewar yanayi.
• Riƙe waɗannan umarnin don tunani na gaba.
• Wannan samfurin, lokacin shigar da shi, zai kasance wani ɓangare na tsarin injiniya wanda ƙayyadaddun ƙayyadaddun bayanai da halayen aiki ba su ƙirƙira ko sarrafa su ta Instruments HK. Review aikace-aikace da lambobin ƙasa da na gida don tabbatar da cewa shigarwa zai kasance mai aiki da aminci. Yi amfani da ƙwararrun ƙwararrun ƙwararrun masana kawai don shigar da wannan na'urar.

APPLICATIONS

RHT-MOD jerin na'urorin yawanci ana amfani da su don saka idanu:

• zafi da matakan zafi a ofisoshi, wuraren jama'a, asibitoci, dakunan taro da azuzuwa
• zafi da zafin jiki a aikace-aikacen kasuwanci daban-daban
• zafi da zafin jiki a cikin yanayin HVAC/R

BAYANI

Ayyuka

Adadin ma'auni:
Zazzabi: 0…50 °C
Dangantakar zafi: 0-100 %

Daidaito:
Zazzabi: <0.5ºC
Dangin zafi: ± 2…3 % a 0…50 °C da 10-90% rH
Jimlar ƙungiyar kuskure ta haɗa da daidaito, juzu'i da tasirin zafi sama da 5…50 °C da 10-90% rH.

Ƙididdiga na Fasaha

Dacewar kafofin watsa labarai:
Busasshen iska ko iskar gas mara ƙarfi

Raka'a masu aunawa:
°C da % rH

Abun aunawa:
Zazzabi: Haɗe
Dangantakar zafi: Thermoset polymer capacitive element sensing

Muhalli:

Yanayin aiki: 0…50 °C
Adana zafin jiki: -20…70 °C
Humidity: 0 zuwa 95% rH, ba condensing

Na zahiri

Girma:
Girma: 99 x 90 x 32 mm
Nauyi:
150g ku
hawa:
3 dunƙule ramukan ramuka, 3.8 mm
Kayayyaki:
Harka: ABS
Standard kariya:
IP20
Nunawa
Kariyar tabawa
Girman: 77.4 x 52.4 mm
Haɗin lantarki:
Tushen wutan lantarki:
5-screw block block
(24V, GND)
0.2-1.5 mm2 (12-24 AWG)
Sake fitarwa:
3-screw block block
(NC, COM, NO)
0.2-1.5 mm2 (12-24 AWG)

Lantarki

Shigarwa: 24 VAC ko VDC, ± 10%
Amfani na yanzu: max 90mA (a 24V) + 10mA ga kowane vol.tage fitarwa ko 20 mA ga kowane fitarwa na yanzu

Sake fitarwa:

SPDT Relay, 250 VAC / 30 VDC / 6 A
Daidaitacce wurin sauyawa da ƙwanƙwasa Fitowar analog ɗaya don zaɓin kafofin watsa labarai: 0/2*–10 VDC, Load R ƙaramar 1 kΩ *(2-10 VDC nuni kawai) ko 4-20 mA, matsakaicin nauyi 500 Ω

Sadarwa

Protocol: MODBUS akan Serial Line
Yanayin watsawa: RTU
Saukewa: RS485
Tsarin Byte (bits 11) a cikin yanayin RTU: Tsarin Coding: binary 8-bit
Bits ga Byte:
1 fara bit
8 data ragowa, mafi ƙanƙanta mahimmin bit aika
na farko
1 bit don daidaito
1 tasha bit

Ƙimar Baud: Zaɓuɓɓuka a cikin tsari
Adireshin Modbus: 1-247 adiresoshin zaɓaɓɓu a cikin menu na daidaitawa

Conformance

Ya cika buƙatun don alamar CE:
Umarnin EMC 2014/30/EU
Umarnin RoHS 2002/95/EC
Umarnin LVD 2014/35/EU
Dokar WEEE 2012/19/EU

KAMFANI DA TSARIN SAURARA DA DNV GL = ISO 9001 = ISO 14001 = ISO XNUMX = ISO XNUMX

HANKALI

AZAN GIRMAMAWA

SHIGA

1. Hana na'urar a wurin da ake so (duba mataki na 1).
2. Juya igiyoyin kuma haɗa wayoyi (duba mataki na 2).
3. Yanzu an shirya na'urar don daidaitawa.

GARGADI! Aiwatar da wuta kawai bayan an yi wa na'urar waya yadda ya kamata.

Mataki 1: HAWAN NA'urar

1. Zaɓi wurin hawa a bango a 1.2-1.8 m (4-6 ft) sama da bene kuma aƙalla 50 cm (20 in) daga bangon da ke kusa. Kar a toshe filayen iska na na'ura daga kowace hanya kuma ku bar tazarar akalla 20 cm (8 in) zuwa wasu na'urori. Nemo naúrar a cikin yanki mai kyaun samun iska da matsakaicin zafin jiki, inda zai zama mai amsa ga canje-canje ga yanayin ɗakin. RHT-MOD ya kamata a ɗora shi akan ƙasa mai lebur.

Kada ku nemo RHT-MOD inda zai iya shafar shi:

• Hasken rana kai tsaye
• Zane-zane ko matattun wuraren bayan ƙofofi
• Radiant zafi daga kayan aiki
• Tufafin da aka boye ko hayaki
• Bangon waje ko wuraren da ba a sanyaya ba

2) Yi amfani da na'urar azaman samfuri kuma yi alama ramukan dunƙule.
3) Dutsen farantin bango tare da sukurori.

• Shigar da ba daidai ba na iya haifar da canji a fitarwar zafin jiki
• Tsare murfi tare da dunƙule makullin, idan an haɗa relay zuwa wutar lantarki

MATAKI NA 2: TSARI NA WIRING

HANKALI!

• Don yarda da CE, ana buƙatar kebul na kariya da kyau.
• Yi amfani da wayar tagulla kawai. Sanya goro ko wayoyi duk hanyoyin da ba a yi amfani da su ba.
• Bayar da kebul daban don gudun ba da sanda da sigina yayin amfani da voltage don kunna relay.
• Duk wani wayoyi na iya ɗaukar cikakken layin aiki voltage halin yanzu dangane da shigarwar filin. Dole ne a shigar da dunƙule makullin murfin idan layin voltage ana kawota zuwa relay.
• Ya kamata a yi amfani da kulawa don guje wa fitarwar lantarki zuwa na'urar.
• Wannan rukunin yana da masu tsalle-tsalle. Kuna iya buƙatar sake saita wannan na'urar don aikace-aikacen ku.

1. Juya igiyoyin ta hanyar buɗe murabba'i a farantin baya ko don haɗa waya ta sama zaɓi ƙwanƙwasa a saman ko kasan farantin bango, kamar yadda aka nuna a hoto 2a.
2. Haɗa wayoyi kamar yadda aka nuna a hoto 2b da 2c.

ABIN LURA! Lokacin amfani da dogon wayoyi masu haɗi yana iya zama dole a yi amfani da keɓantaccen waya ta GND don voltage fitarwa halin yanzu don hana auna murdiya. Bukatar ƙarin waya ta GND ya dogara da ɓangaren giciye da tsawon wayoyin haɗin da aka yi amfani da su. Idan aka yi amfani da dogon da/ko ƙananan wayoyi na ɓangaren giciye, samar da halin yanzu da juriya na waya na iya haifar da voltage sauke a cikin na kowa GND waya yana haifar da gurbataccen ma'aunin fitarwa.

MATAKI NA 3: TSIRA

Saita tsarin na'urar RHT-MOD ta ƙunshi:

1. Ana saita masu tsalle (duba mataki na 4)
2. Zaɓuɓɓukan menu na saiti. (Nuna nau'ikan kawai. Duba littafin mai amfani don ƙarin cikakkun bayanai)

Mataki na 4: Saitunan Jumper

1. Kanfigareshan hanyoyin fitarwa: Zaɓi yanayin fitarwa, na yanzu (4-20mA) ko voltage (0-10 V), ta hanyar shigar masu tsalle kamar yadda aka nuna a hoto na 4. Don zaɓar yanayin fitarwa na 2-10 V akan sigar nuni na na'urar: Na farko, zaɓi fitarwa 0-10 V ta jumper, sannan canza vol.tage (V) fitarwa daga 0-10 V zuwa 2-10 V ta hanyar menu na sanyi. Da fatan za a duba jagorar mai amfani don ƙarin cikakkun bayanai.

2) Kulle nuni:
Shigar da jumper don kulle nuni don hana samun dama ga menu na daidaitawa bayan an gama shigarwa (duba tsarin tsarin wurin fil ɗin).

MATAKI NA 5: MODBUS REGISTERS

Ayyuka don sadarwar Modbus:

Lambar aiki 02 – Karanta halin shigarwa

Lambar aiki 03 – Karanta rijistar riƙon shigarwa

Lambar aiki 04 - Karanta rajistar shigarwa

Lambar aiki 05 - Rubuta coil guda ɗaya

Lambar aiki 06 - Rubuta rajista guda ɗaya

Lambar aiki 16 - Rubuta rajista da yawa

SAKE YIWA/ZURAREWA

Ya kamata a sake amfani da sassan da suka rage daga shigarwa bisa ga umarnin gida. Yakamata a kai na'urorin da aka soke zuwa wurin sake yin amfani da su wanda ya ƙware a sharar lantarki.

SIYASAR GARANTI

Mai siyarwar ya wajaba ya ba da garanti na shekaru biyar don kayan da aka kawo game da kaya da masana'antu. Ana ɗaukar lokacin garanti don farawa akan ranar isar da samfur. Idan an sami lahani a cikin kayan albarkatun ƙasa ko aibi na samarwa, mai siyarwar ya wajaba, lokacin da aka aika samfurin ga mai siyarwa ba tare da bata lokaci ba ko kafin garantin, don gyara kuskuren bisa ga ra'ayinsa ko dai ta hanyar gyara abin da ya lalace. ko ta hanyar isar da sabon samfur kyauta ga mai siye da aika wa mai siye. Kudin bayarwa don gyara ƙarƙashin garanti za a biya ta mai siye da farashin dawowa ta mai siyarwa. Garanti bai ƙunshi lalacewa ta hanyar haɗari, walƙiya, ambaliya ko wasu al'amuran halitta, lalacewa da tsagewa na yau da kullun, rashin kulawa ko rashin kulawa, amfani mara kyau, wuce gona da iri, ajiya mara kyau, kulawa mara kyau ko sake ginawa, ko canje-canje da aikin shigarwa ba wanda mai sayarwa ko wakilinsa mai izini.
Zaɓin kayan don na'urori masu saurin lalacewa alhakin mai siye ne, sai dai idan an yarda da shi bisa doka. Idan mai ƙira ya canza tsarin na'urar, mai siyarwa ba dole ba ne ya yi kwatankwacin canje-canje ga na'urorin da aka riga aka saya. Neman garanti yana buƙatar mai siye ya cika aikin sa daidai da bayarwa kuma ya bayyana a cikin kwangilar. Mai siyarwar zai ba da sabon garanti na kayan da aka musanya ko gyara a cikin garanti, amma kawai zuwa ƙarshen lokacin garanti na asali. Garanti ya haɗa da gyaran ɓangarorin yanki ko na'ura, ko idan an buƙata, sabon sashi ko na'ura, amma ba farashin shigarwa ko musayar ba. Babu wani yanayi da mai siyar ke da alhakin biyan diyya na lalacewa kai tsaye.

 

Haƙƙin mallaka HK Instruments 2021

www.hkinstruments.fi

Sigar shigarwa 7.0 2021

Takardu / Albarkatu

	HK INSTRUMENTS RHT-MOD-Series Masu watsa Humidity [pdf] Jagoran Jagora RHT-MOD-Series Masu watsa Humidity
	HK Instruments RHT-MOD Jerin Humidity Transmitters [pdf] Jagoran Jagora Jerin RHT-MOD Masu watsa Humidity, Jerin RHT-MOD, Masu watsa Humidity, Masu watsawa

Magana

• Manual mai amfani