FlySpark-logo

FlySpark F4 V1 Stack Flight Controller

FlySpark-F4-V1-Stack-Flight-Controller-productƘayyadaddun bayanai

  • Sunan samfur:
    FlySpark F4 V1 BLS 60A Tari
  • Siffofin AI:
    Sensor Fusion, PID Autotuning, Adaptive Filtering
  • Software Tallafi:
    Betaflight, INAV, Ardupilot, EMU-jirgin sama, SkyBrush
  • ESC Communication:
    BLHeli_S Bluetooth & USB-C
  • Haɗin kai:
    3-6S LiPo
  • Girma:
    47.8mm(L) x 47.5mm(W) x 18.3mm(H)
  • hawa:
    30.5 x 30.5mm tare da girman rami 4mm
  • Nauyi:
    34 g

FlySpark-F4-V1-Stack-Flight-Controller-fig-9 FlySpark-F4-V1-Stack-Flight-Controller-fig-10

Umarnin Amfani da samfur

Mai sarrafa Jirgin FlySpark F4 V1

Tsari:
Refer to the user manual for the layout of the flight controller.

Haɗin Wuta:
Connect peripherals as per the provided diagram.

Tsarin App & FC:
Use the recommended apps and follow the configuration instructions.

Sabunta Firmware FC:
Connect the flight controller to a PC via USB for firmware updates.

FLYSPARK BLS 60A 4-IN-1 ESC

Tsari:
Check the layout guide in the manual for proper installation.

Haɗi tare da Motoci & Kebul na Wuta:
Connect motors and power cables securely.

Tsarin ESC:
Use the FlySpark app for ESC configuration settings.

Sabunta Firmware ESC:
Follow the provided steps to update the firmware for ESC.

FlySpark F4 V1 BLS 60A TariFlySpark-F4-V1-Stack-Flight-Controller-fig-1

Bayanin ƘarsheviewFlySpark-F4-V1-Stack-Flight-Controller-fig-20

FlySpark-F4-V1-Stack-Flight-Controller-fig-2 FlySpark-F4-V1-Stack-Flight-Controller-fig-3

KunshinFlySpark-F4-V1-Stack-Flight-Controller-fig-4.1

  • FlySpark F4 V1 Flight Controller x 1
  • FlySpark BLS 60A 4-in-1 ESC x 1
  • 35V 1000uF Low ESR Capacitor x 1
  • M3 Nailan Nut x 4
  • SH 1.0mm 25mm-tsawon 8pin Cable(don haɗin FC-ESC) x 1 SH 1.0mm 75mm-tsawon 6pin Cable* x 1
  • M3*30mm Iner-hexagon sukurori x 4
  • DJI 6pin Cable(80mm) x 1
  • XT60 Power Cable (100mm) x 1

FlySpark-F4-V1-Stack-Flight-Controller-fig-5.2

FC Connection zaneFlySpark-F4-V1-Stack-Flight-Controller-fig-6

Jagora zuwa Haɗin FC & ESC

Hanyar 1:

  • Using 8.Pin JST CableFlySpark-F4-V1-Stack-Flight-Controller-fig-7

Hanyar 2:

Siyar da Kai tsaye

  • Sayar da wayoyi 8 zuwa pads 8 akan kowane ƙarshen, bin ma'anar kushin da ke ƙasaFlySpark-F4-V1-Stack-Flight-Controller-fig-8

Takaddun bayanai masu sarrafa jirgin

FlySpark-F4-V1-Stack-Flight-Controller-fig-11.2

  • Yi amfani da kebul-pin 6 ya zo tare da O3 Air Unit FlySpark-F4-V1-Stack-Flight-Controller-fig-12.1
  • Yi amfani da kebul-pin 6 ya zo tare da FlySpark F4 V1 BLS 60A Stack

FlySpark-F4-V1-Stack-Flight-Controller-fig-13

F C Firmware  update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:

  • Use a USB cable to connect the FlySpark F4 VI flight controller to your PC

Open Betaflight I INAV Configurator.

  • . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.

Navigate to Firmware Flashing:

  • In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.

Select Target and Flash Firmware:

  •  Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
  • Initiate the firmware flashing process.

Lura:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be  performed using a USB connection to your PC.

FlySpark-F4-V1-Stack-Flight-Controller-fig-14

Flyspark BLS 60A 4-in-l ESCFlySpark-F4-V1-Stack-Flight-Controller-fig-15

Haɗin kai tare da Motoci & Kebul na WutaFlySpark-F4-V1-Stack-Flight-Controller-fig-16

ESC Specs FlySpark F4 V1 BLS 60A StackFlySpark-F4-V1-Stack-Flight-Controller-fig-17

ESC Firmware Sabuntawa
Wannan 8-bit 50A ESC ya zo an riga an ɗora shi tare da firmware na BLHeliS amma kuma ana iya haskaka shi zuwa firmware Bluejay, yana ba da tacewa RPM da tallafin Dshot Bi-directional. Bi waɗannan matakan don sabunta firmware:

  1. Prepare Your Drone:
    Remove all propellers from your drone for safety.
  2. Connect ESC to Flight Controller:
    Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly.
  3. Haɗa zuwa PC:
    Use a USB Type-C cable to connect the flight controller to your computer.
  4. Access Firmware Configuration:
    Open the Chrome browser and visit: www.esc-configurator.com
  5. Flashing Steps:
    Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.

FlySpark-F4-V1-Stack-Flight-Controller-fig-21

HANKALI:FlySpark-F4-V1-Stack-Flight-Controller-fig-19

  • PROPELLERS OFF: REMOVE ALL PROPELLERS.
  • SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
  • FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
  • STABLE POWER: ENSURE STABLE POWER SUPPLY.
  • www.FlySpark.in

FAQs

Ta yaya zan sabunta ESC firmware?

To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.

Takardu / Albarkatu

FlySpark F4 V1 Stack Flight Controller [pdf] Manual mai amfani
F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *