ESPRESSIF ESP32-C3-MINI-1 Wi-Fi da Bluetooth LE Module
Ƙayyadaddun bayanai
- Ladabi: Wi-Fi da Bluetooth LE
- Yawan Mitar: Ba a kayyade ba
- Module na Radiyo: Haɗe-haɗe crystal
- Mai aiki Voltage/Samar Wuta: Ba a kayyade ba
- Aiki Yanzu: 500 mA
- Mafi ƙanƙanta na Yanzu Ana bayarwa ta Wuta bayarwa: Ba a kayyade ba
- Yanayin yanayi: Ba a kayyade ba
- Matsayin Ji daɗin Danshi (MSL): Ba a kayyade ba
Module Overview
ESP32-C3-MINI-1 shine babban maƙasudin Wi-Fi da Bluetooth LE module wanda ya dace da gidaje masu kaifin baki, sarrafa kansa na masana'antu, kula da lafiya, na'urorin lantarki, da sauransu. aikace-aikace daban-daban.
Bayanin Pin
- Tsarin yana da fil 53 tare da ayyuka daban-daban da suka haɗa da GPIO, samar da wutar lantarki, da fil ɗin sarrafawa. Koma ga zanen fil ɗin don ƙarin cikakkun bayanai.
Falon Layout
- Kafin farawa, tabbatar cewa kuna da duk kayan aikin kayan aikin da ake buƙata don aiki tare da tsarin ESP32-C3-MINI-1.
Haɗin Hardware
- Haɗa ƙirar ESP32-C3-MINI-1 zuwa saitin haɓaka ku ta bin kwatancen fil ɗin da aka bayar a cikin jagorar.
Shigar da Sakamako
- Shigar da duk mahimman software da kayan aikin da ake buƙata don haɓaka ESP32-C3-MINI-1.
Samu ESP-IDF
- Zazzagewa kuma saita ESP-IDF (Espressif IoT Development Framework) don tsara tsarin.
Saita Kayan aiki
- Sanya kayan aikin haɓakawa kamar IDEs, masu tarawa, da masu gyara kurakurai don ci gaban ESP32-C3-MINI-1.
Saita Canjin Muhalli
- Kafa masu canjin yanayi don tabbatar da aiki mai kyau na yanayin ci gaba.
FAQ
Tambaya: A ina zan sami sabon sigar littafin jagorar mai amfani?
A: Kuna iya komawa zuwa sabon sigar koyaushe a https://www.espressif.com/en/support/download/documents.
Q: Nawa fil na ESP32-C3-MINI-1 module yake da su?
A: Tsarin yana da jimlar fil 53 tare da ayyuka daban-daban.
Koma ma'anar fil a cikin littafin don cikakkun bayanai.
Game da Wannan Takardun
- Wannan jagorar mai amfani yana nuna yadda ake farawa da tsarin ESP32-C3-MINI-1.
Sabunta Takardu
- Da fatan za a koma zuwa sabon sigar a koyaushe https://www.espressif.com/en/support/download/documents.
Tarihin Bita
- Don tarihin sake fasalin wannan takarda, da fatan za a koma shafi na ƙarshe.
Sanarwa Canjin Takardu
- Espressif yana ba da sanarwar imel don ci gaba da sabunta ku kan canje-canje ga takaddun fasaha. Da fatan za a yi rajista a www.espressif.com/en/subscribe.
Takaddun shaida
- Zazzage takaddun shaida don samfuran Espressif daga www.espressif.com/en/certificates.
Ƙarsheview
Module Overview
ESP32-C3-MINI-1 babban maƙasudi ne na Wi-Fi da Bluetooth LE. Saitin arziƙin na gefe da ƙananan girman sa wannan ƙirar ya zama kyakkyawan zaɓi don gidaje masu wayo, sarrafa kansa na masana'antu, kula da lafiya, kayan lantarki na mabukaci, da sauransu.
Tebur 1: Bayanan Bayani na ESP32C3MINI1
| Categories | Siga | Ƙayyadaddun bayanai |
| Wi-Fi | Ka'idoji | 802.11 b/g/n (har zuwa 150 Mbps) |
| Kewayon mita | 2412 ~ 2462 MHz | |
| Bluetooth® | Ka'idoji | Bluetooth® LE: Bluetooth 5 da Bluetooth mesh |
| Rediyo | Class-1, class-2 da class-3 watsawa | |
| Hardware | Module musaya | GPIO, SPI, UART, I2C, I2S, ramut na gefe, LED PWM mai sarrafawa, babban mai sarrafa DMA, TWAI® mai sarrafawa (mai jituwa tare da ISO 11898-1), firikwensin zafin jiki, SAR ADC |
| Haɗe-haɗe crystal | 40 MHz crystal | |
| Ƙa'idar aikitage/Power wadata | 3.0 ~ 3.6 V | |
| Aiki na yanzu | Matsakaici: 80mA | |
| Mafi ƙarancin halin yanzu ana isar da wutar lantarki | 500 mA | |
| Yanayin yanayi | -40 °C ~ +105 °C | |
| Matsayin jin daɗi (MSL) | Mataki na 3 |
Bayanin Pin
Module ɗin yana da fil 53. Duba ma'anar fil a Tebu 2.
Don daidaitawar fil, da fatan za a koma ga Takardar bayanan Iyali ESP32-C3.
Tebur 2: Ma'anar Ma'anar Pin
| Suna | A'a. | Nau'in | Aiki |
| GND | 1, 2, 11, 14, 36-53 | P | Kasa |
| 3V3 | 3 | P | Tushen wutan lantarki |
| NC | 4 | - | NC |
| IO2 | 5 | I/O/T | GPIO2, ADC1_CH2, FSPIQ |
| IO3 | 6 | I/O/T | GPIO3, ADC1_CH3 |
| NC | 7 | - | NC |
| EN | 8 | I | High: a kunne, yana ba da damar guntu. Ƙananan: a kashe, guntu yana kashe wuta.
Lura: Kar a bar fil ɗin EN yana yawo. |
| NC | 9 | - | NC |
| NC | 10 | - | NC |
| Suna | A'a. | Nau'in | Aiki |
| IO0 | 12 | I/O/T | GPIO0, ADC1_CH0, XTAL_32K_P |
| IO1 | 13 | I/O/T | GPIO1, ADC1_CH1, XTAL_32K_N |
| NC | 15 | - | NC |
| IO10 | 16 | I/O/T | GPIO10, FPICS0 |
| NC | 17 | - | NC |
| IO4 | 18 | I/O/T | GPIO4, ADC1_CH4, FSPIHD, MTMS |
| IO5 | 19 | I/O/T | GPIO5, ADC2_CH0, FSPIWP, MTDI |
| IO6 | 20 | I/O/T | GPIO6, FPICLK, MTCK |
| IO7 | 21 | I/O/T | GPIO7, FSPID, MTDO |
| IO8 | 22 | I/O/T | Farashin GPIO8 |
| IO9 | 23 | I/O/T | Farashin GPIO9 |
| NC | 24 | - | NC |
| NC | 25 | - | NC |
| IO18 | 26 | I/O/T | Farashin GPIO18 |
| IO19 | 27 | I/O/T | Farashin GPIO19 |
| NC | 28 | - | NC |
| NC | 29 | - | NC |
| Saukewa: RXD0 | 30 | I/O/T | GPIO20, U0RXD, |
| MUX0 | 31 | I/O/T | GPIO21, U0TXD |
| NC | 32 | - | NC |
| NC | 33 | - | NC |
| NC | 34 | - | NC |
| NC | 35 | - | NC |
Farawa akan ESP32C3MINI1
Abin da kuke Bukata
- Don haɓaka aikace-aikace don ƙirar ESP32-C3-MINI-1 kuna buƙata.
- 1 x ESP32-C3-MINI-1
- 1 x Espressif RF kwamitin gwaji
- 1 x USB-to-Serial allon
- 1 x Kebul na Micro-USB
- 1 x PC mai sarrafa Linux
- A cikin wannan jagorar mai amfani, muna ɗaukar tsarin aiki na Linux azaman example. Don ƙarin bayani game da sanyi akan Windows da macOS, da fatan za a koma zuwa Jagorar Shirye-shiryen ESP-IDF.
Haɗin Hardware
- Sayar da tsarin ESP32-C3-MINI-1 zuwa allon gwajin RF kamar yadda aka nuna a hoto 2.
- Haɗa allon gwajin RF zuwa allon USB-zuwa-Serial ta TXD, RXD, da GND.
- Haɗa allon USB-zuwa-Serial zuwa PC.
- Haɗa allon gwajin RF zuwa PC ko adaftar wuta don ba da damar samar da wutar lantarki 5 V, ta kebul na Micro-USB.
- Yayin zazzagewa, haɗa IO0 zuwa GND ta hanyar tsalle. Sannan, kunna “ON” allon gwaji.
- Zazzage firmware cikin Flash. Don cikakkun bayanai, duba sassan da ke ƙasa.
- Bayan zazzagewa, cire jumper akan IO0 da GND.
- Ƙaddamar da allon gwajin RF kuma. ESP32-C3-MINI-1 zai canza zuwa yanayin aiki. Guntu zai karanta shirye-shirye daga Flash akan farawa.
Lura: IO0 yana da ma'ana cikin ciki high. Idan an saita IO0 don cirewa, an zaɓi yanayin Boot. Idan wannan fil ɗin yana jan ƙasa ko hagu yana iyo, an zaɓi yanayin zazzagewa. Don ƙarin bayani akan ESP32-C3-MINI-1, da fatan za a koma zuwa ESP32-C3-MINI-1 Datasheet.
- CentOS 7.
- Ubuntu da Debian (umarni ɗaya ya kasu kashi biyu).
- Arch.
Lura:
- Wannan jagorar tana amfani da directory ~/esp akan Linux azaman babban fayil ɗin shigarwa don ESP-IDF.
- Ka tuna cewa ESP-IDF baya goyan bayan sarari a cikin hanyoyi.
Samu ESPDF
- Don gina aikace-aikacen ESP32-C3-MINI-1, kuna buƙatar ɗakunan karatu na software wanda Espressif ya bayar a cikin ESP-IDF ma'ajin.
- Don samun ESP-IDF, ƙirƙiri jagorar shigarwa (~/esp) don zazzage ESP-IDF zuwa kuma rufe ma'ajiyar tare da 'git clone':
- Za a sauke ESP-IDF zuwa ~/esp/esp-idf. Shawara Sigar ESP-IDF don bayani game da wane nau'in ESP-IDF don amfani da shi a cikin wani yanayi da aka bayar.
Saita Kayan aiki
- Baya ga ESP-IDF, kuna buƙatar shigar da kayan aikin da ESP-IDF ke amfani da su, kamar na'ura mai haɗawa, debugger, fakitin Python, da sauransu. ESP-IDF yana ba da rubutun mai suna 'install. sh,' don taimakawa saita kayan aikin a tafi ɗaya.
Saita Canjin Muhalli
- Har yanzu ba a ƙara kayan aikin da aka shigar zuwa canjin yanayin PATH ba. Don yin amfani da kayan aikin daga layin umarni, dole ne a saita wasu masu canjin yanayi.
- ESP-IDF yana ba da wani rubutun 'fitarwa. sh,' wanda ya aikata hakan. A cikin tashar da za ku yi amfani da ESP-IDF, gudu:
- Yanzu komai yana shirye, zaku iya gina aikinku na farko akan tsarin ESP32-C3-MINI-1.
Ƙirƙiri Aikin Farko na Farko Fara Aiki
- Yanzu kun shirya don shirya aikace-aikacen ku don tsarin ESP32-C3-MINI-1. Kuna iya farawa da fara/sannu_duniya aikin daga examples directory a cikin ESP-IDF.
- Kwafi fara farawa/hello_world zuwa ~/esp directory:
- Akwai kewayon exampda ayyukan a cikin exampLes directory a cikin ESP-IDF. Kuna iya kwafi kowane aiki kamar yadda aka gabatar a sama kuma ku gudanar da shi. Hakanan yana yiwuwa a gina examples a wurin, ba tare da kwafi su farko ba.
Haɗa Na'urar ku
- Yanzu haɗa na'urar ESP32-C3-MINI-1 ɗin ku zuwa kwamfutar kuma duba ƙarƙashin tashar tashar tashar jiragen ruwa na ganuwa. Serial ports a Linux suna farawa da '/ dev/tty' a cikin sunayensu.
- Gudun umarni a ƙasa sau biyu, na farko tare da cire allon, sannan tare da toshewa. Tashar da ke bayyana a karo na biyu ita ce wacce kuke buƙata:
- Lura: Rike sunan tashar jiragen ruwa da amfani kamar yadda zaku buƙaci shi a matakai na gaba.
Sanya
- Kewaya zuwa kundin adireshin ku na 'hello_world' daga Mataki 2.4.1. Fara wani Project, saita ESP32-C3 a matsayin manufa, kuma gudanar da tsarin tsarin aikin 'menuconfig'.
- Saita manufa tare da 'idf.py set- target esp32c3' yakamata a yi sau ɗaya, bayan buɗe sabon aiki. Idan aikin ya ƙunshi wasu gine-ginen da aka gina da kuma daidaitawa, za a share su kuma a fara farawa.
- Ana iya ajiye manufa a cikin canjin yanayi don tsallake wannan matakin kwata-kwata. Duba Zaɓin Makasudin don ƙarin bayani.
- Idan matakan da suka gabata an yi su daidai, menu mai zuwa yana bayyana:
- Launuka na menu na iya bambanta a tashar ku. Kuna iya canza kamanni tare da zaɓi'-style'. Da fatan za a gudanar da saitin menu na idf.py -help don ƙarin bayani.
Gina Aikin
- Gina aikin ta hanyar gudu
- Wannan umarnin zai tattara aikace-aikacen da duk abubuwan ESP-IDF, sannan kuma zai samar da bootloader, tebur na bangare, da binaries na aikace-aikace.
- Idan babu kurakurai, ginin zai ƙare ta hanyar samar da firmware binary .bin file.
Filasha zuwa Na'urar
- Finata binaries ɗin da kuka gina akan tsarin ku na ESP32-C3-MINI-1 ta hanyar gudu.
- Sauya PORT da sunan tashar tashar jiragen ruwa na samfurin ku daga Mataki: Haɗa na'urar ku.
- Hakanan zaka iya canza ƙimar baud flasher ta maye gurbin BAUD tare da ƙimar baud ɗin da kuke buƙata. Adadin baud ɗin tsoho shine 460800.
- Don ƙarin bayani kan muhawara idf.py, duba idf.py.
- Lura: Zaɓin 'flash' yana ginawa da walƙiya aikin ta atomatik, don haka gudanar da'idf.py gini' ba lallai bane.
- Idan komai ya yi kyau, aikace-aikacen "hello_world" zai fara aiki bayan ka cire jumper akan IO0 da GND, kuma ka sake kunna allon gwaji.
Saka idanu
- Don bincika idan da gaske "hello_world" yana gudana, rubuta 'idf.py -p PORT Monitor' (Kada ku manta da maye gurbin PORT da sunan tashar tashar ku).
Wannan umarni yana ƙaddamar da aikace-aikacen IDF Monitor:
- Bayan farawa da rajistan ayyukan bincike gungura sama, yakamata ku ga "Hello duniya!" bugu daga aikace-aikacen.
- Don fita daga IDF duba yi amfani da gajeriyar hanya Ctrl+].
- Wannan shine kawai abin da kuke buƙatar farawa tare da tsarin ESP32-C3-MINI-1! Yanzu kun shirya don gwada wasu examples a cikin ESP-IDF ko tafi daidai don haɓaka aikace-aikacenku.
Abubuwan Koyo
Takardun Dole Karanta
- Da fatan za a san kanku da waɗannan takaddun.
- Takardar bayanan Iyali ESP32-C3
- Wannan gabatarwa ce ga ƙayyadaddun kayan aikin ESP32-C3, gami da ƙariview, ma'anar fil, bayanin aiki, mahaɗar yanayi, halayen lantarki, da dai sauransu.
- Jagorar Shirye-shiryen ESP-IDF
- Takaddun bayanai masu yawa don tsarin haɓaka ESP-IDF, kama daga jagororin kayan aiki zuwa nassoshin API.
- ESP32-C3 Bayanan Bayani na Fasaha
- Cikakkun bayanai kan yadda ake amfani da ƙwaƙwalwar ESP32-C3 da kayan aiki.
- Bayanin oda samfuran Espressif
Muhimman Albarkatu
- Anan ga mahimman albarkatun ESP32-C3 masu alaƙa.
- Saukewa: ESP32BBS Injiniya-zuwa-Injiniya (E2E) Community don samfuran Espressif inda zaku iya buga tambayoyi, raba ilimi, bincika dabaru, da kuma taimakawa warware matsaloli tare da injiniyoyin ƙwararru.
Tarihin Bita
| Kwanan wata | Sigar | Bayanan sanarwa |
| 2021-02-01 | V0.1 | Sakin farko |
Jerin Dokokin FCC masu aiki
- FCC Sashe na 15 Karamin Sashe na C 15.247 & 15.209
Musamman Sharuɗɗan Amfani
- Tsarin yana da WiFi da ayyukan BLE.
Mitar Aiki:
- WiFi: 2412 ~ 2462 MHz
- Bluetooth: 2402 ~ 2480 MHz
Adadin Tashoshi:
- WiFi: 12
- Bluetooth: 40
Modulation:
- WiFi: DS; OFDM
- Bluetooth: Farashin GFSK
- Nau'in: Eriyar PCB akan jirgi
- Riba: 3.96 dBi Max
Ana iya amfani da ƙirar don aikace-aikacen IoT tare da matsakaicin eriya 3.96 dBi. Mai ƙera masaukin da ke shigar da wannan ƙa'idar a cikin samfuran su dole ne su tabbatar da cewa samfurin haɗe-haɗe na ƙarshe ya bi ka'idodin FCC ta hanyar kimanta fasaha ko kimanta dokokin FCC, gami da aikin watsawa. Mai sana'anta ya kamata ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF a cikin littafin jagorar ƙarshen samfurin wanda ya haɗa wannan tsarin. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari/gargaɗi da ake buƙata kamar yadda aka nuna a cikin wannan jagorar.
Tsare-tsaren Module masu iyaka
Bai dace ba. Samfurin samfurin guda ɗaya ne kuma ya dace da buƙatun FCC Sashe na 15.212.
Zane-zanen Eriya
Bai dace ba. Module ɗin yana da eriyar sa kuma baya buƙatar bugu na runduna microstrip trace eriya, da sauransu.
La'akari da Bayyanar RF
Dole ne a shigar da ƙirar a cikin kayan aikin mai watsa shiri kamar yadda aƙalla 20cm ana kiyaye shi tsakanin eriya da jikin mai amfani; kuma idan an canza bayanin bayyanarwar RF ko shimfidar tsarin, to ana buƙatar mai sana'anta samfurin ya ɗauki alhakin tsarin ta canji a FCC ID ko sabon aikace-aikace. Ba za a iya amfani da ID na FCC na ƙirar akan samfurin ƙarshe ba.
A cikin waɗannan yanayi, masana'anta za su ɗauki alhakin sake kimanta ƙarshen samfurin (ciki har da mai watsawa) da samun izinin FCC daban.
Bayanin Antenna sune kamar haka:
- Nau'in: Eriyar PCB akan jirgi
- Riba: 3.96db ku
- Anyi nufin wannan na'urar don masana'antun baƙi kawai a ƙarƙashin yanayi masu zuwa:
- Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
- Za a yi amfani da tsarin tare da eriya (s) na waje waɗanda aka gwada da asali tare da wannan tsarin.
- Dole ne eriyar ta kasance ko dai ta kasance a haɗe ta har abada ko kuma a yi amfani da na'urar haɗin eriya ta musamman.
- Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, masana'anta har yanzu suna da alhakin gwada ƙarshen samfurin su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).
Lakabi da Bayanin Biyayya
- Masu sana'a samfurin mai watsa shiri suna buƙatar samar da tambarin jiki ko e-lamba mai faɗi "Ya ƙunshi ID na FCC: 2BDC6- SHELLYXMOD1H8" tare da ƙãre samfurinsu.
- Bayani kan hanyoyin gwaji da ƙarin buƙatun gwaji
Mitar Aiki:
- WiFi: 2412 ~ 2462 MHz
- Bluetooth: 2402 ~ 2480 MHz
Adadin Tashoshi:
- WiFi: 12
- Bluetooth: 40
Modulation:
- WiFi: DS; OFDM
- Bluetooth: Farashin GFSK
- Dole ne masana'antun masu watsa shirye-shirye su yi gwaje-gwajen watsawa da gudanar da hayaki da hayaƙi, da dai sauransu, bisa ga ainihin hanyoyin gwaji don mai watsawa na yau da kullun a cikin runduna, da kuma na'urorin watsawa da yawa a lokaci guda ko wasu masu watsawa a cikin samfurin rundunar. Sai kawai lokacin da duk sakamakon gwajin yanayin gwaji ya bi ka'idodin FCC, to za a siyar da samfurin ƙarshe bisa doka.
FCC
Ƙarin gwaji, Sashe na 15 Ƙarfafan Sashe na B
Mai watsawa na yau da kullun FCC ce kawai ke da izini don FCC Sashe na 15 Sashe na C 15.247 & 15.209 kuma masana'anta samfurin suna da alhakin bin duk wasu ƙa'idodin FCC waɗanda ke aiki ga mai watsa shiri ba tare da tallafin takaddun shaida na zamani ba. Idan wanda aka ba da kyauta ya tallata samfuran su azaman Sashe na 15 yana bayyana cewa kazar ta samar da daidaitattun rana Sashe shine gwajin yarda da sudipal ya ci ya shigar da na'urar watsawa.
An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da shi, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi da amfani da umarnin ba, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rarrabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani kanti a kan kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan kayan aikin ya cika FCC RF iyakokin fallasa hasken da aka tsara don yanayi mara sarrafawa. Wannan na'urar da eriya ba dole ne su kasance tare ko aiki tare da kowane eriya ko mai watsawa ba.
Dole ne a shigar da eriya da ake amfani da su don wannan mai watsawa don samar da nisa na aƙalla 20 cm daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.
Umarnin Haɗin Kan OEM
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin yanayi masu zuwa:
Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
Za a yi amfani da tsarin tare da eriya (s) na waje waɗanda aka gwada da asali tare da wannan tsarin.
Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).
Ingancin Amfani da Takaddun shaida na Module
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko wurin haɗin gwiwa tare da wani mai watsawa), to, izinin FCC na wannan ƙirar a hade tare da kayan aikin rundunar ba a ɗaukan inganci kuma ba za a iya amfani da ID na FCC na module ɗin akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance da alhakin sake kimanta samfurin ƙarshe (gami da mai watsawa) da samun izinin FCC daban.
Ƙarshen Lakabin Samfura
Dole ne a yi wa samfurin ƙarshen alamar alama a wuri mai zuwa tare da mai zuwa: "Ya ƙunshi Mai watsawa Module FCC ID: 2BDC6-SHELLYXMOD1H8".
Sanarwa da Haƙƙin mallaka
- Bayani a cikin wannan takarda, gami da URL nassoshi, ana iya canzawa ba tare da sanarwa ba.
- DUK BAYANIN KASHI NA UKU A CIKIN WANNAN TAKARDUN ANA BADA KAMAR YADDA BABU WARRANCI GA GASKIYA DA INGANTACCEN SA.
- BABU WARRANTI DA AKA BAYAR DA WANNAN TAKARDON DON SAMUN SANUNSA, RA'AYIN TSINUWA, KO KWANTA GA KOWANE MUSAMMAN MANUFAR, KUMA BABU WANI Garantin da ya fito daga kowane Shawara, BAYANI, BAYANI, BAYANIAMPLE.
- Duk wani abin alhaki, gami da abin alhaki don keta haƙƙin mallaka, da ya shafi amfani da bayanai a cikin wannan takaddar ba a musanta ba.
- Babu wani lasisi da aka bayyana ko bayyana, ta estoppel ko akasin haka, ga kowane haƙƙin mallakar fasaha da aka bayar anan.
- Alamar Memba ta Wi-Fi Alliance alamar kasuwanci ce ta Wi-Fi Alliance. Tambarin Bluetooth alamar kasuwanci ce mai rijista ta Bluetooth SIG.
- Duk sunayen kasuwanci, alamun kasuwanci, da alamun kasuwanci masu rijista da aka ambata a cikin wannan takaddar mallakin masu su ne kuma an yarda dasu.
- Haƙƙin mallaka © 2021 Espressif Systems (Shanghai) Co., Ltd. Duk haƙƙin mallaka.
- www.espressif.com
Takardu / Albarkatu
 |
ESPRESSIF ESP32-C3-MINI-1 Wi-Fi da Bluetooth LE Module [pdf] Manual mai amfani ESP32-C3-MINI-1, ESP32-C3-MINI-1 Wi-Fi da Bluetooth LE Module, Wi-Fi da Bluetooth LE Module, Bluetooth LE Module, LE Module, Module |
