Jagorar Aikace-aikace
Amfani da Standard Rasberi Pi OS a kunne
Saukewa: ED-IPC3020
Abubuwan da aka bayar na EDA Technology Co., Ltd
Fabrairu 2024
Tuntube Mu
Na gode sosai don siyayya da amfani da samfuranmu, kuma za mu yi muku hidima da zuciya ɗaya.
A matsayinmu na ɗaya daga cikin abokan haɗin gwiwar ƙira na duniya na Rasberi Pi, mun himmatu wajen samar da mafita na kayan aiki don IOT, sarrafa masana'antu, sarrafa kansa, makamashin kore da kuma bayanan ɗan adam wanda ya dogara da dandalin fasahar Raspberry Pi.
Kuna iya tuntuɓar mu ta hanyoyi masu zuwa: EDA Technology Co., LTD
Adireshi: Ginin 29, No.1661 Babban Titin Jialuo, Gundumar Jiading, Shanghai
Wasika: sales@edatec.cn
Waya: +86-18217351262
Website: https://www.edatec.cn
Goyon bayan sana'a:
Wasika: support@edatec.cn
Waya: +86-18627838895
Wechat: zzw_1998-
Bayanin Haƙƙin mallaka
ED-IPC3020 da haƙƙin mallakar fasaha masu alaƙa mallakar EDA Technology Co., LTD.
EDA Technology Co., LTD ta mallaki haƙƙin mallaka na wannan takarda kuma tana da haƙƙin mallaka. Ba tare da rubutaccen izinin EDA Technology Co., LTD ba, babu wani ɓangare na wannan takarda da za a iya gyara, rarraba ko kwafi ta kowace hanya ko tsari.
Disclaimer
EDA Technology Co., LTD baya bada garantin cewa bayanin da ke cikin wannan littafin ya kasance na zamani, daidai, cikakke ko na inganci. EDA Technology Co., LTD kuma baya bada garantin ƙarin amfani da wannan bayanin. Idan asarar kayan ko abin da ba na kayan abu ba ya haifar da amfani ko rashin amfani da bayanan da ke cikin wannan jagorar, ko ta amfani da bayanan da ba daidai ba ko da bai cika ba, muddin ba a tabbatar da cewa niyya ne ko sakaci na EDA Technology Co., LTD, ana iya keɓanta da'awar abin alhaki na EDA Technology Co., LTD. EDA Technology Co., LTD tana da haƙƙin haɓakawa ko haɓaka abubuwan ciki ko ɓangaren wannan littafin ba tare da sanarwa ta musamman ba.
Gabatarwa
Iyalin Karatu
Wannan jagorar tana aiki ga masu karatu masu zuwa:
- Injiniya Injiniya
- Injiniyan Lantarki
- Injiniyan Software
- Injiniyan Tsari
Taron Alama
| Alama | Umarni |
 |
Alamun gaggawa, suna nuna mahimman fasali ko ayyuka. |
 |
Alamun sanarwa, wanda zai iya haifar da rauni na mutum, lalacewar tsarin, ko katsewar sigina/asara. |
 |
Alamomin faɗakarwa, waɗanda za su iya haifar da babbar illa ga mutane. |
Umarnin Tsaro
- Ya kamata a yi amfani da wannan samfurin a cikin yanayin da ya dace da ƙayyadaddun ƙira, in ba haka ba yana iya haifar da gazawa, kuma rashin daidaituwar aiki ko lalacewar ɓangarorin da ya haifar da rashin bin ƙa'idodin da suka dace ba su cikin iyakokin tabbacin ingancin samfur.
- Kamfaninmu ba zai ɗauki kowane alhaki na doka don hatsarurrukan amincin mutum da asarar dukiya da ke haifar da aikin samfur ba bisa ka'ida ba.
- Don Allah kar a canza kayan aiki ba tare da izini ba, wanda zai iya haifar da gazawar kayan aiki.
- Lokacin shigar da kayan aiki, wajibi ne a gyara kayan aiki don hana shi faduwa.
- Idan kayan aikin suna da eriya, da fatan za a kiyaye nisa na akalla 20cm daga kayan aiki yayin amfani.
- Kada a yi amfani da kayan tsaftace ruwa, kuma nisantar da ruwa da kayan wuta.
- Ana tallafawa wannan samfurin don amfanin cikin gida kawai.
Ƙarsheview
Wannan babin yana gabatar da bayanan bango da kewayon aikace-aikace na amfani da daidaitaccen Rasberi Pi OS akan jerin ED-IPC3020.
1.1 Fage
ED-IPC3020 jerin samfuran suna da tsarin aiki tare da shigar da BSP ta tsohuwa lokacin barin masana'anta. Ya ƙara tallafi don BSP, ƙirƙira masu amfani, kunna SSH kuma yana goyan bayan haɓaka kan layi na BSP. Yana da aminci kuma abin dogara, kuma masu amfani za su iya amfani da tsarin aiki.
NOTE:
Idan mai amfani ba shi da buƙatu na musamman, ana ba da shawarar yin amfani da tsohuwar tsarin aiki. Hanyar saukewa ita ce Saukewa: ED-IPC3020.
Idan mai amfani yana son yin amfani da daidaitaccen Rasberi Pi OS bayan karɓar samfurin, wasu ayyuka ba za su kasance ba bayan canza tsarin aiki zuwa daidaitaccen Rasberi Pi OS. Domin magance wannan matsalar, ED-IPC3020 yana goyan bayan shigarwa akan layi don fakitin Firmware don sa samfurin ya fi dacewa da daidaitaccen Rasberi Pi OS kuma tabbatar da cewa ana iya amfani da duk ayyuka.
ED-IPC3020 yana goyan bayan daidaitaccen Rasberi Pi OS ta hanyar shigar da fakitin kernel da fakitin firmware akan layi akan daidaitaccen Rasberi Pi OS (bookworm).
1.2 Rage Aikace-aikacen
Abubuwan da ke cikin wannan aikace-aikacen sun haɗa da ED-IPC3020.
Tunda yin amfani da tsarin aiki mai 64-bit zai iya mafi kyawun amfani da aikin kayan aikin, ana ba da shawarar yin amfani da daidaitaccen Raspberry Pi OS (bookworm) mai 64-bit. Cikakkun bayanai sune kamar haka:
| Samfurin Samfura | OS mai goyan baya |
| Saukewa: ED-IPC3020 | Rasberi Pi OS (Desktop) 64-bit-bookworm (Debian 12) Rasberi Pi OS(Lite) 64-bit-bookworm (Debian 12) |
Jagorar Aikace-aikace
Wannan babin yana gabatar da matakan aiki na amfani da daidaitaccen Rasberi Pi OS akan jerin ED-IPC3020.
2.1 Tsarin Aiki
Babban tsarin aiki na tsarin aikace-aikacen yana kamar yadda aka nuna a ƙasa. 
2.2 Zazzage OS File
Kuna iya saukar da Rasberi Pi OS da ake buƙata file bisa ga ainihin bukatun. Hanyoyin zazzagewa sune kamar haka:
| OS | Zazzage Hanya |
| Rasberi Pi OS (Desktop) 64-bit-bookworm (Debian 12) | https://downloads.raspberrypi.com/raspios_arm64/images/raspios_arm64-202312-06/2023-12-05-raspios-bookworm-arm64.img.xz |
| Rasberi Pi OS (Lite) 64-bitbookworm (Debian 12) | https://downloads.raspberrypi.com/raspios_lite_arm64/images/raspios_lite_arm64-2023-12-11/2023-12-11-raspios-bookworm-arm64-lite.img.xz |
2.3 walƙiya zuwa katin SD
ED-IPC3020 yana farawa tsarin daga katin SD ta tsohuwa. Idan kana son amfani da sabuwar OS, kana buƙatar flash OS zuwa katin SD. Ana ba da shawarar yin amfani da kayan aikin Rasberi Pi, kuma hanyar zazzagewa ita ce kamar haka:
Hoton Rasberi Pi: https://downloads.raspberrypi.org/imager/imager_latest.exe.
Shiri:
- An gama saukewa da shigar da kayan aikin Rasberi Pi Imager zuwa PC na Windows.
- An shirya mai karanta katin.
- The OS file an samu.
- An sami katin SD na ED-IPC3020.
Matakai:
An bayyana matakan ta amfani da Windows OS azaman example.
- Saka katin SD a cikin mai karanta katin, sannan saka mai karanta katin a cikin tashar USB na PC.
- Bude Hoton Rasberi Pi, zaɓi “ZABI OS” kuma zaɓi “Yi amfani da Kwamfuta” a cikin babban fage.
- Bisa ga faɗakarwa, zaɓi OS da aka sauke file ƙarƙashin hanyar da aka ayyana mai amfani kuma komawa zuwa babban shafi.
- Danna "ZABI STORAGE", zaɓi katin SD na ED-IPC3020 a cikin "Ajiye", sannan komawa zuwa babban shafi.
- Danna "Gaba", zaɓi "NO" a cikin pop-up "Yi amfani da gyare-gyaren OS?" fanni.
- Zaɓi "YES" a cikin fage na "Gargadi" don fara rubuta hoton.
- Bayan an gama rubutun OS, da file za a tabbatar.
- Bayan an gama tabbatarwa, danna “CIGABA” a cikin akwatin “Rubuta Nasara”.
- Rufe Hoton Rasberi Pi, sannan cire mai karanta katin.
- Saka katin SD cikin ED-IPC3020 kuma kunna sake.
2.4 Kanfigareshan na farko
Wannan sashe yana gabatar da saitunan da suka dace lokacin da masu amfani suka fara tsarin a karon farko.
2.4.1 Daidaitaccen Rasberi Pi OS (Desktop)
Idan kuna amfani da sigar Desktop na daidaitaccen Rasberi Pi OS, kuma OS ɗin ba a saita shi a cikin “daidaitawar OS” na Rasberi Pi Imager kafin walƙiya zuwa katin SD. Saitin farko yana buƙatar kammala lokacin da aka fara tsarin.
Shiri:
- Na'urorin haɗi kamar nuni, linzamin kwamfuta, madannai da adaftar wuta waɗanda za'a iya amfani da su akai-akai an shirya su.
- Cibiyar sadarwa da za a iya amfani da ita kullum.
- Sami kebul na HDMI da kebul na cibiyar sadarwa wanda za'a iya amfani dashi akai-akai.
Matakai:
- Haɗa na'urar zuwa cibiyar sadarwa ta hanyar kebul na cibiyar sadarwa, haɗa nuni ta hanyar kebul na HDMI, kuma haɗa linzamin kwamfuta, madannai, da adaftar wutar lantarki.
- Wutar na'urar kuma tsarin zai fara. Bayan tsarin ya fara kullum, rukunin "Barka da zuwa Rasberi Pi Desktop" zai tashi.
- Danna "Na gaba" kuma saita sigogi kamar "Ƙasa", "Harshe" da "Timezone" a cikin buƙatun "Set Country" bisa ga ainihin bukatun.
NASIHA:
Tsohuwar maɓalli na tsarin shine shimfidar madannai na Biritaniya, ko kuma za ku iya duba “Yi amfani da madannai na Amurka” kamar yadda ake buƙata. - Danna "Na gaba" don keɓancewa da ƙirƙirar "username" da "Password" don shiga cikin tsarin a cikin pop-up "Create User" pane.
- Danna "Na gaba":
Idan kayi amfani da tsohon sigar tsohuwar sunan mai amfani pi da tsoho kalmar sirrin raspberry lokacin ƙirƙirar sunan mai amfani da kalmar wucewa, akwatin faɗakarwa mai zuwa zai tashi kuma danna "Ok".
Wurin “Set Up Screen” yana buɗewa, kuma ana saita sigogi masu alaƙa da allon kamar yadda ake buƙata.
- Danna "Na gaba" kuma zaɓi cibiyar sadarwar mara waya don haɗawa a cikin pop-up "Zaɓi hanyar sadarwa ta WiFi".
- Danna "Next" kuma shigar da kalmar wucewa ta hanyar sadarwa mara waya a cikin pop-up "Shigar da kalmar wucewa ta WiFi".
- Danna "Next", sannan danna "Na gaba" a cikin fa'idar "Update Software" don dubawa da sabunta software ta atomatik.
- Bayan dubawa da sabunta manhajar, danna “Ok”, sannan ka danna “Restart” a cikin “Setup Complete” pop-up don kammala tsarin farko da fara tsarin.
- Bayan farawa, shigar da tebur na OS.
NOTE:
Za a iya samun ɗan bambance-bambance a cikin tsarin farko na nau'ikan Rasberi Pi OS daban-daban, da fatan za a koma zuwa ainihin mu'amala. Don ayyuka masu alaƙa, da fatan za a duba https://www.raspberrypi.com/documentation/computers/getting-started.html#getting-started-withyour-raspberry-pi.
4.2 Daidaitaccen Rasberi Pi OS (Lite)
Idan kuna amfani da nau'in Lite na daidaitaccen Rasberi Pi OS, kuma OS ɗin ba a saita shi a cikin “daidaitawar OS” na Rasberi Pi Imager kafin walƙiya zuwa katin SD. Saitin farko yana buƙatar kammala lokacin da aka fara tsarin.
Shiri:
- Na'urorin haɗi kamar nuni, linzamin kwamfuta, madannai da adaftar wuta waɗanda za'a iya amfani da su akai-akai an shirya su.
- Cibiyar sadarwa da za a iya amfani da ita kullum.
- Sami kebul na HDMI da kebul na cibiyar sadarwa wanda za'a iya amfani dashi akai-akai.
Matakai:
- Haɗa na'urar zuwa cibiyar sadarwa ta hanyar kebul na cibiyar sadarwa, haɗa nuni ta hanyar kebul na HDMI, kuma haɗa linzamin kwamfuta, madannai, da adaftar wutar lantarki.
- Wutar na'urar kuma tsarin zai fara. Bayan tsarin ya fara kullum, sashin "Configuring-Configuring-Configuring Keyboard" zai tashi. Kuna buƙatar saita maɓallin madannai bisa ga ainihin buƙatun.
- Zaɓi "Ok", sannan za ku iya fara ƙirƙirar sabon sunan mai amfani a cikin rukunin.
- Zaɓi "Ok", sannan za ku iya fara saita kalmar sirri don sabon mai amfani a cikin rukunin.
- Zaɓi "Ok", sa'an nan kuma shigar da kalmar sirri a cikin ayyuka.
- Zaɓi "Ok" don kammala saitin farko kuma shigar da haɗin shiga.
- Bisa ga faɗakarwa, shigar da sunan mai amfani da kalmar sirri don shiga cikin tsarin. Bayan an gama farawa, shigar da tsarin aiki.
2.5 Sanya Kunshin Firmware
Wannan sashin yana gabatar da takamaiman ayyuka na shigar da fakitin firmware akan daidaitaccen Rasberi Pi OS. Ya dace da daidaitaccen Rasberi Pi OS (bookworm).
Bayan walƙiya zuwa katin SD na Raspberry Pi OS (bookworm) akan jerin ED-IPC3020, zaku iya saita tsarin ta ƙara tushen edatec apt, shigar da fakitin kernel, shigar da fakitin firmware, da kashe haɓakar kernel na rasberi, ta yadda ana iya amfani da tsarin kullum.
Shiri:
An gama walƙiya zuwa katin SD da saitin farawa na Rasberi Pi daidaitaccen OS (bookworm).
Matakai:
- Bayan na'urar ta fara kullum, aiwatar da umarni masu zuwa a cikin rukunin umarni don ƙara tushen edatec apt.
curl -sS https://apt.edatec.cn/pubkey.gpg | sudo apt-key add -
echo "deb https://apt.edatec.cn/raspbian barga main" | sudo tee
/etc/apt/sources.list.d/edatec.list
sudo dace update
- Yi umarni mai zuwa don shigarwa da sabunta kunshin kernel.
sudo dace shigar -y ed-linux-image-6.1.58-2712
curl -s 'https://apt.edatec.cn/downloads/202403/kernel-change.sh' | sudo bash -s
6.1.58-rpi7-rpi-2712 - Yi umarni mai zuwa don shigar da fakitin firmware.
sudo dace shigar -y ed-ipc3020-firmware
NASIHA:
Idan kun shigar da fakitin firmware ba daidai ba, zaku iya aiwatar da “sudo apt-get –purge remove package” don share shi, inda “kunshin” shine sunan fakitin. - Yi umarni mai zuwa don kashe haɓaka haɓakar kernel na rasberi.
dpkg -l | grep linux-image | awk '{bugu $2}' | grep ^linux | yayin karantawa
layi; yi sudo apt-mark riƙe $ layi; yi - Bayan an gama shigarwa, aiwatar da umarni mai zuwa don bincika ko an shigar da fakitin firmware cikin nasara.
dpkg -l | grep ed-ipc3020-firmware
Sakamakon a hoton da ke ƙasa yana nuna cewa an shigar da fakitin firmware cikin nasara.
- Yi umarni mai zuwa don sake kunna na'urar.
sudo sake yi
Sabunta Firmware (Na zaɓi)
Bayan tsarin yana farawa kullum, zaku iya aiwatar da umarni masu zuwa a cikin rukunin umarni don haɓaka firmware na tsarin da haɓaka ayyukan software.
NASIHA:
Idan kuna da matsalolin software lokacin amfani da samfuran jerin samfuran ED-IPC3020, zaku iya ƙoƙarin haɓaka tsarin Firmware.
sudo dace update
sudo dace haɓakawa
Takardu / Albarkatu
 |
EDA ED-IPC3020 Series Amfani da Daidaitaccen Rasberi [pdf] Jagorar mai amfani ED-IPC3020 Jerin Amfani da Daidaitaccen Rasberi, ED-IPC3020 Jerin, Amfani da Daidaitaccen Rasberi, Daidaitaccen Rasberi, Rasberi |