CRUX RVCCH-75R Rear View tare da Interface Interface VIM da Tailgate Handle Kamara

Bayanin samfur

R Sightline Multi-View Haɗin kai (RVCCH-75R) ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun kayan aikin RAM ne. Yana fasalin bayaview kamara tare da haɗin VIM (Video in Motion) da kyamarar riƙon wutsiya. Module ɗin yana sanye da masu haɗawa da wayoyi daban-daban don sauƙin shigarwa.

Siffofin Samfur

• Na bayaview kamara tare da haɗin VIM
• Tailgate rike kamara
• 22-pin maza da mata masu haɗawa
• 20 ft. coax na USB
• DIP LED canza don saitunan daban-daban

Sassan Sun Haɗe

• Saukewa: RVCCH-75R
• Saukewa: RVCCH-75R
• Tailgate rike kamara
• Mai daidaitawa
• 20 ft. coax na USB
• 8-Pin Molex

Ayyukan Canjawa DIP:

• DIP 1: Bidiyo a cikin Kunna Motsi (VIM na dindindin) / KASHE (amfani da Green waya)
• DIP 2: Gaba View Kamara A Kunna / KASHE
• DIP 3: Saita zuwa KASHE
• DIP 4: Saita zuwa KASHE
• DIP 5: CAN Karshe Side Rediyo*
• DIP 6: CAN Ƙare Gefen Mota*

* Idan rediyon yana da matsalolin kunnawa, akwai saitunan canza DIP daban-daban don gwadawa.

Umarnin Amfani da samfur

Shigar da Interface RVCCH-75R:

1. Cire rediyon masana'anta don samun dama ga masu haɗin masana'anta.
2. Toshe t-harness tare da masu haɗin WHITE da GRAY. Koma zuwa zanen wayoyi a shafi na 1.
3. Saita saitunan canza DIP masu dacewa akan tsarin RVCCH-75R. Koma ga ginshiƙi na sama.
4. Yi amfani da WHITE 12V Reverse Output waya don kunna kamara. KAR KA haɗa wayar wutar lantarki kusa da kamara zuwa hasken baya. Sanya wannan jan waya don gujewa gajarta. Idan abin hawa yana da watsawar hannu, matsa ƙarfin kyamara zuwa waya mai juyawa ta +12V maimakon. A wannan yanayin, ba a amfani da WHITE 12V Reverse Output waya kuma ya kamata a keɓe.
5. Toshe tushen AV kuma gwada aiki.
6. Ci gaba zuwa shigar da kyamarar hannun wutsiya.

Sanya CDR-02 Kamara:

1. Cire hannun wutsiya na OE.
2. Cire Silinda makullin OE kuma shigar da shi a cikin gidan kyamarar CDR-02.
3. Shigar da sabon hannun wutsiya kuma kunna igiyoyin zuwa rediyo.
4. Cire rediyon masana'anta don samun dama ga masu haɗin masana'anta.
5. Juya wayoyi zuwa rediyo kuma yi haɗin wuta da bidiyo. Don ƙarfafa kyamara, yi amfani da 12V OUTPUT (White Wire). Koma zuwa zanen wayoyi a shafi na 1.
6. Haɗa wayar ƙasan kyamara zuwa ƙasan chassis. Idan hayaniyar bidiyo ta kasance, ana ba da shawarar ƙasa kamara kai tsaye zuwa BLACK waya akan RVCCH-75D T-harness.
7. CDR-02 yana da zaɓin layukan jagorar filin ajiye motoci wanda aka ƙera zuwa ON daga masana'anta. Don kashe layin jagorar filin ajiye motoci, koma zuwa umarnin kamara.

SIFFOFIN KIRKI

• Yana kunna rediyon Mygig don kunna fasalin bidiyo
• An haɗa kyamarar hannun wutsiya
• Keɓancewar ya haɗa da shigarwar Audio / Bidiyo don haɗa ƙarin tushen A/V
• Yana canzawa ta atomatik zuwa Rear-view lokacin da mota ke cikin yanayin Reverse
• Yana goyan bayan motoci tare da watsawar hannu amma baya bayar da +12V Reverse Kamara dole ne a taɓa shi daga waya mai juyawa ta +12V maimakon
• Shigar da Toshe & Kunnawa

KASHIN HADA:

GUDUN CIKI

YADDA ZA'AYI TSAYE

AYYUKAN CIN GINDI:

• DIP 1 = Bidiyo a Kunna Motsi (VIM na dindindin) / KASHE (amfani da Green waya)
• DIP 2 = Gaba View Kamara A Kunna / KASHE
• DIP 3 = Saita zuwa KASHE
• DIP 4 = Saita zuwa KASHE
• DIP 5 = CAN Karshe Side Rediyo
• DIP 6 = CAN Ƙare Gefen Mota*

DIP 5 & 6
Idan rediyo yana da matsalolin kunnawa, da fatan za a gwada waɗannan:

• Ƙoƙari 1: Saita 5 & 6 zuwa ON
• Ƙoƙari 2: Saita 5 zuwa ON da 6 zuwa KASHE
  Ƙoƙari 3: Saita 5 zuwa KASHE da 6 zuwa ON

UMARNIN SHIGA

SHIGA RVCCH-75R INTERFACE

1. Cire rediyon masana'anta don samun damar shiga masana'anta
2. Toshe t-harness da WHITE da GRAY (Duba zanen waya a shafi na 1)
3. Saita saitunan Canjin DIP masu dacewa akan RVCCH-75R (Duba ginshiƙi a sama)
4. Yi amfani da WHITE 12V Reverse Output waya don kunna kamara (duba zanen wayoyi a shafi na 1). KAR KA haɗa wayar wutar lantarki ta ja, kusa da kamara, zuwa hasken baya kuma sanya wannan jajayen waya don gujewa gajarta. Idan abin hawa yana da watsawar hannu, dole ne a taɓa ƙarfin kamara zuwa waya mai juyawa ta +12V A wannan yanayin ba a yi amfani da WHITE 12V Reverse Output waya ba kuma ya kamata a keɓe don guje wa gajarta.
5. Toshe tushen AV kuma gwada Ci gaba don shigar da kyamarar riƙon wutsiya

SHIGA CDR-02 KAMERA

1. Cire ƙofar wutsiya na OE
2. Cire Silinda makullin OE kuma sanya shi a cikin kyamarar CDR-02
3. Shigar da sabon hannun wutsiya kuma gudanar da igiyoyin zuwa ga
4. Cire rediyon masana'anta don samun damar shiga masana'anta
5. Juya wayoyi zuwa rediyon kuma yi wuta da bidiyo Don ƙarfafa kamara, yi amfani da 12V OUTPUT (White Waya). (Dubi Zane na Waya a shafi na 1)
6. Haɗa wayar ƙasan kyamara zuwa chassis Idan hayaniyar bidiyo ta kasance, muna ba da shawarar ƙasan kyamarar kai tsaye zuwa BLACK waya akan RVCCH-75D T-harness.
7. CDR-02 yana da zaɓin jagororin ajiye motocin da aka gina a ciki kuma an ƙera shi zuwa ON daga Don kashe jagororin wurin ajiye motoci, yanke ɓangarorin WHITE waya dake kan kebul na kamara taku 4 daga kyamara. Cire masu haɗin ganga akan kebul na tsawon daƙiƙa 5. Daidaita kibau akan masu haɗin ganga kuma a haɗa su da ƙarfi.
8. Toshe RCA namiji mai rawaya daga kebul na kyamara zuwa RCA mace mai rawaya na t-harness tare da farin
9. Saka kayan a baya don gwada kamara kafin sake sakawa

BAYANI AKAN LED

Tsarin RVCCH-75R yana da LEDs 2 a gefen mai haɗin Molex wanda ke tabbatar da aikinsa kamar haka:

• RED LED: Kunna
  • Tabbatar da Ƙarfi
• BLUE LED: JURIYA
  • Babu BUS, Yana jiran Kashe Bayanai
  • Cikakken Ƙarfin Ƙarfafa SOLID
  • An Gane BUS

SHAWARAR KIYAYYA

Layukan ajiye motoci suna nan don taimaka muku yayin juyawa. Don kashe layin filin ajiye motoci kawai yanke WHITE madauki waya kusa da mahaɗin kyamarar fil 4 kuma sake zagayowar ikon kamara.

Abin da Layukan ke nufi:

• Layin Kore: KYAUTA
• Layin rawaya: KUSA
• Layin ja: GARGADI SOSAI

MASU CANJA:

VES zai zama tushen ku don shigar da AV.

Don samun dama ga maɓallin VES, danna maɓallin RADIO/MEDIA a gefen hagu na rediyon. Maɓallin VES yana aiki ne kawai bayan an shigar da keɓancewa da kyau.

KARATUN MOTA

RAM:
2009 - 2012 RAM Motar

RADIO MAI JATTA

MyGig Radio:
(HARD DISC DRIVE ko HARD DRIVE da aka buga a gefen dama na hannun dama na fuskar rediyo)

Crux Interfacing Solutions
Chatsworth, CA 91311

• Waya: 818-609-9299
• fax: 818-996-8188
• www.cruxinterfacing.com

Takardu / Albarkatu

CRUX RVCCH-75R Rear View tare da Interface Interface VIM da Tailgate Handle Kamara [pdf] Jagoran Jagora Saukewa: RVCCH-75R View tare da Interface Interface VIM da Tailgate Handle Kamara, RVCCH-75R, Rear View tare da Interface Interface VIM da Tailgate Handle Kamara, VIM Interface Interface da Tailgate Handle Kamara, Interface da Tailgate Handle Kamara, Tailgate Handle Kamara, Handle Kamara, Kamara.

Magana

• Manual mai amfani