Control4 CORE1 Mai Kula
Gabatarwa
An ƙera shi don ƙwarewar nishaɗin ɗakin iyali na musamman, Mai Kula da Control4®CORE 1 yana yin fiye da sarrafa kayan aiki a kusa da TV ɗin ku; shi ne madaidaicin tsarin farawa na gida mai wayo tare da nishaɗin da aka gina a ciki. CORE 1 yana ba da kyakkyawan tsari, mai fahimta, da mai amfani da mai amfani akan allon tare da ikon ƙirƙirar da haɓaka ƙwarewar nishaɗi ga kowane TV a cikin gidan. CORE 1 na iya tsara nau'ikan na'urorin nishaɗi da suka haɗa da 'yan wasan Blu-ray, tauraron dan adam ko akwatunan kebul, na'urorin wasan bidiyo, TV, da kusan kowane samfuri a cikin infrared (IR) ko sarrafa serial (RS-232). Hakanan yana fasalta ikon sarrafa IP don Apple TV, Roku, talabijin, AVRs, ko wasu na'urori masu haɗin cibiyar sadarwa, da amintaccen ikon Zigbee mara waya don fitilu, ma'aunin zafi da sanyio, makullai masu wayo, da ƙari. Don nishaɗi, CORE 1 ya haɗa da ginanniyar uwar garken kiɗa wanda ke ba ku damar sauraron ɗakin karatu na kiɗanku, yawo daga manyan ayyukan kiɗan iri-iri, ko daga na'urorin ku na AirPlay ta amfani da fasahar Control4 ShairBridge.
Abubuwan da ke cikin akwatin
Ana haɗa abubuwa masu zuwa a cikin akwatin CORE 1:
- CORE 1 mai sarrafawa
- AC igiyar wuta
- Masu fitar da iska (2)
- Ƙafafun roba (2, an riga an shigar da shi)
- Eriya ta waje (1 na Zigbee)
Akwai na'urorin haɗi don siya
- CORE 1 Bracket Dutsen bango (C4-CORE1-WM)
- Control4 1U Rack-Mount Kit, Single/Dual Controller (C4-CORE1-RMK)
- Control4 3-Mita Mara waya ta Eriya Kit (C4-AK-3M)
- Control4 Dual-Band Wi-Fi adaftar USB (C4-USBWIFI KO C4-USBWIFI-1)
- Control4 3.5 mm zuwa DB9 Serial Cable (C4-CBL3.5-DB9B)
Bukatu da ƙayyadaddun bayanai
- Lura: Muna ba da shawarar amfani da Ethernet maimakon Wi-Fi don mafi kyawun haɗin cibiyar sadarwa.
- Lura: Ya kamata a shigar da hanyar sadarwa ta Ethernet ko Wi-Fi kafin fara shigar da mai sarrafa CORE 1.
- Lura: CORE 1 yana buƙatar OS 3.3 ko sabo.
Ana buƙatar software na mawaki Pro don saita wannan na'urar. Duba Jagorar Mai Amfani Pro Mawaƙin (ctrl4.co/cpro-ug) don cikakkun bayanai.
Gargadi
- Tsanaki! Don rage haɗarin girgiza wutar lantarki, kar a bijirar da wannan na'urar ga ruwan sama ko danshi.
- Tsanaki! A cikin yanayi na yau da kullun akan USB, software ɗin tana hana fitarwa. Idan na'urar USB da aka makala ba ta bayyana tana kunnawa ba, cire na'urar USB daga mai sarrafawa.
Ƙayyadaddun bayanai
| Abubuwan da aka shigar / abubuwan fitarwa | |
| Fitar bidiyo | 1 bidiyo fita-1 HDMI |
| Bidiyo | HDMI 2.0a; 3840×2160 @ 60Hz; HDCP 2.2 da HDCP 1.4 |
| Audio fita | 2 audio out — 1 HDMI da 1 dijital coax |
| Tsarin sake kunnawa audio | AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA |
| sake kunnawa mai ƙarfi mai ƙarfi | Har zuwa 192 kHz / 24 bit |
| Cibiyar sadarwa | |
| Ethernet | 2. |
| Wi-Fi | Adaftan USB Dual-Band Wi-Fi Na zaɓi (2.4 GHz, 5 Ghz, 802.11ac/b/g/n/a) |
| Zigbee Pro | 802.15.4 |
| Zigbee eriya | Mai haɗa SMA na baya |
| tashar USB | 1 USB 3.0 tashar jiragen ruwa - 500mA |
| Sarrafa | |
| IR waje | 4 IR fita - 5V 27mA max fitarwa |
| IR kama | 1 mai karɓar IR-gaba, 20-60 kHz |
| Serial fita | 2 serial out (an raba tare da IR out 1 da 2) |
| Ƙarfi | |
| Bukatun wutar lantarki | 100-240 VAC, 60/50Hz ko PoE+ |
| Amfanin wutar lantarki | Matsakaicin: 18W, 61 BTUs/ hour Mara aiki: 9W, 30 BTUs/h |
| Sauran | |
| Yanayin aiki | 32˚F ~ 104˚F (0˚C ~ 40˚C) |
| Yanayin ajiya | 4˚F ~ 158˚F (-20˚C ~ 70˚C) |
| Girma (H × W × D) | 1.16 × 7.67 × 5.2 ″ (29.5 × 195 × 132 mm) |
| Nauyi | 1.5 lb (0.68 kg) |
| Nauyin jigilar kaya | 2.3 lb (1.04 kg) |
Ƙarin albarkatu
Ana samun albarkatu masu zuwa don ƙarin tallafi.
- Taimako da bayanai na Control4 CORE: ctrl4.co/core
- Snap One Tech Community da Knowledgebase: tech.control4.com
- Taimakon Fasaha na Control4: ctrl4.co/techsupport
- Sarrafa4 webYanar Gizo: www.control4.com
Gaba view
- LED Aiki-Aikin LED yana nuna lokacin da mai sarrafawa ke yawo da sauti.
- Tagar B IR — Mai karɓar IR don koyan lambobin IR.
- C Caution LED-Wannan LED yana nuna ja mai ƙarfi, sannan yana lulluɓe shuɗi yayin aikin taya.
Lura: The Tsanaki LED bliss orange a lokacin factory mayar da tsari. Duba "Sake saitin zuwa saitunan masana'anta" a cikin wannan takaddar. - D Link LED - LED yana nuna cewa an gano mai sarrafawa a cikin aikin Control4 kuma yana sadarwa tare da Darakta.
- E Power LED - LED mai shuɗi yana nuna cewa ikon AC yana nan. Mai sarrafawa yana kunna kai tsaye bayan an yi amfani da wutar lantarki a kai.
Baya view
- Tashar wutar lantarki - Mai haɗa wutar lantarki ta IEC 60320-C5.
- B IR OUT/SERIAL — jacks na mm 3.5 na har zuwa masu fitar da IR guda huɗu ko don haɗakar masu fitar da IR da na'urori masu lamba. Ana iya saita tashoshin jiragen ruwa 1 da 2 don kansu don sarrafa serial (don sarrafa masu karɓa ko masu canza diski) ko don sarrafa IR. Dubi "Haɗa tashoshin jiragen ruwa na IR / serial ports" a cikin wannan takarda don ƙarin bayani.
- C USB-Tashoshi ɗaya don kebul na USB na waje (kamar sandar USB da aka tsara FAT32). Dubi "Kafa na'urorin ajiya na waje" a cikin wannan takaddar.
- D DIGITAL AUDIO — Abubuwan da ake fitarwa (AUDIO OUT) waɗanda aka raba daga wasu na'urorin Control4 ko daga kafofin jiwuwa na dijital (kafofin watsa labarai na gida ko sabis na yawo na dijital).
- E HDMI OUT - tashar tashar HDMI don nuna menus kewayawa. Hakanan ana samun sauti ta hanyar HDMI.
- Maballin ID na F da SAKESET — ana danna maɓallin ID don gano na'urar a cikin Mawaƙin Pro. Maɓallin ID akan CORE 1 shima LED ne wanda ke nuna martani mai amfani yayin dawo da masana'anta. Ana amfani da RESET pinhole don sake saiti ko masana'anta maido da mai sarrafawa.
- G ENET OUT-RJ-45 jack don haɗin Ethernet fita. Yana aiki azaman mai sauya hanyar sadarwa ta tashar jiragen ruwa 2 tare da ENET/POE+ IN jack.
- H ENET/POE+ IN-RJ-45 jack don haɗin 10/100/1000BaseT Ethernet. Hakanan zai iya kunna mai sarrafawa tare da PoE+.
- I ZIGBEE—Mai haɗa eriya don rediyon Zigbee.
umarnin shigarwa
Don shigar da mai sarrafawa:
- Tabbatar cewa cibiyar sadarwar gida tana wurin kafin fara saitin tsarin. Ana buƙatar haɗin Ethernet zuwa cibiyar sadarwar gida don saitin. Mai sarrafawa yana buƙatar haɗin cibiyar sadarwa don amfani da duk fasalulluka kamar yadda aka tsara. Bayan daidaitawar farko, ana iya amfani da Ethernet (shawarar) ko Wi-Fi (tare da adaftar zaɓi) don haɗa mai sarrafawa zuwa. web- tushen kafofin watsa labaru, sadarwa tare da wasu na'urorin IP a cikin gida, da samun damar sabunta tsarin Control4.
- Dutsen mai sarrafawa kusa da na'urorin gida da kuke buƙatar sarrafawa. Ana iya ɓoye mai sarrafawa a bayan TV, a ɗaura shi akan bango, shigar da shi a cikin rake, ko sanya shi a kan shiryayye. Ana siyar da Kit ɗin Dutsen CORE 1 Rack daban kuma an tsara shi don sauƙin shigarwa har zuwa masu sarrafa CORE 1 guda biyu a gefe a cikin rakodi. Ana siyar da Bracket na bangon CORE 1 daban kuma an tsara shi don sauƙin shigar da mai sarrafa CORE 1 a bayan TV ko a bango.
- Haɗa eriya zuwa mai haɗin eriyar ZIGBEE.
- Haɗa mai sarrafawa zuwa cibiyar sadarwa.
- Ethernet-Don haɗawa ta amfani da haɗin Ethernet, haɗa kebul na cibiyar sadarwa zuwa tashar tashar RJ-45 mai sarrafawa (mai lakabi ENET/POE+ IN) kuma cikin tashar cibiyar sadarwa akan bango ko a canjin hanyar sadarwa.
- Wi-Fi-Don haɗawa ta amfani da Wi-Fi, fara haɗa naúrar zuwa Ethernet, haɗa adaftar Wi-Fi zuwa tashar USB, sannan yi amfani da Mawallafin Pro System Manager don sake saita naúrar don Wi-Fi.
- Haɗa na'urorin tsarin. Haɗa IR da na'urorin serial kamar yadda aka bayyana a cikin "Haɗin tashar jiragen ruwa na IR / serial ports" da "Kafa IR emitters."
- Saita kowace na'urar ma'ajiya ta waje kamar yadda aka bayyana a cikin "Shigar da na'urorin ajiya na waje" a cikin wannan takaddar.
- Idan ana amfani da wutar AC, haɗa igiyar wutar lantarki zuwa tashar wutar lantarkin mai sarrafawa sannan cikin mashin wutar lantarki.
Haɗa tashoshin jiragen ruwa na IR / serial ports (na zaɓi)
Mai sarrafawa yana ba da tashoshin IR guda huɗu, kuma tashoshin 1 da 2 za a iya sake daidaita su da kansu don sadarwar serial. Idan ba a yi amfani da su don serial ba, ana iya amfani da su don IR. Haɗa serial na'urar zuwa mai sarrafawa ta amfani da Control4 3.5 mm-to-DB9 Serial Cable (C4-CBL3.5-DB9B, sayarwa daban).
- Serial tashoshin jiragen ruwa suna goyan bayan ƙimar baud tsakanin 1200 zuwa 115200 baud don m har ma da daidaito. Serial tashoshin jiragen ruwa ba su goyi bayan sarrafa kwararar hardware.
- Dubi labarin Ilimi #268 (ctrl4.co/contr-serial-pinout) don zane-zane.
- Don saita tashar jiragen ruwa don serial ko IR, yi hanyoyin haɗin da suka dace a cikin aikin ku ta amfani da Mawaƙin Pro. Duba Jagorar Mai Amfani Pro Mawaƙi don cikakkun bayanai.
Lura: Za'a iya saita tashoshin jiragen ruwa na serial azaman madaidaiciya-ta hanyar ko banza tare da Mawaƙin Pro. Serial ports ta tsohuwa ana saita su kai tsaye kuma ana iya canza su a cikin Mawaƙi ta zaɓi Null Modem Enabled (SERIAL 1 ko 2).
Kafa IR emitters
Tsarin ku na iya ƙunsar samfuran ɓangare na uku waɗanda ake sarrafawa ta hanyar umarnin IR.
- Haɗa ɗaya daga cikin abubuwan da aka haɗa na IR zuwa tashar IR OUT akan mai sarrafawa.
- Sanya ƙarshen emitter na sanda akan mai karɓar IR akan na'urar Blu-ray, TV, ko sauran na'urar da aka yi niyya don fitar da siginar IR daga mai sarrafawa zuwa na'urar da aka yi niyya.
Saita na'urorin ajiya na waje (na zaɓi)
Kuna iya adanawa da samun dama ga kafofin watsa labarai daga na'urar ajiyar waje, misaliample, rumbun kwamfutarka na cibiyar sadarwa ko na'urar ƙwaƙwalwar ajiyar USB, ta hanyar haɗa kebul ɗin USB zuwa tashar USB da daidaitawa ko bincika kafofin watsa labarai a cikin Mawaki Pro.
- Lura: Muna goyan bayan fayafan kebul na waje kawai ko sandunan USB masu ƙarfi. Kebul na USB masu iko da kai ba su da tallafi.
- Lura: Lokacin amfani da na'urorin ajiya na USB akan mai sarrafa CORE 1, zaku iya amfani da bangare ɗaya kawai tare da matsakaicin girman TB 2. Wannan iyakance kuma ya shafi ma'ajin USB akan wasu masu sarrafawa.
Bayanin direban mawaki Pro
Yi amfani da Ganowar atomatik da SDDP don ƙara direba zuwa aikin Mawaƙi. Duba Jagorar Mai Amfani Pro Mawaƙin (ctrl4.co/cpro-ug) don cikakkun bayanai.
Saitin OvrC da daidaitawa
OvrC yana ba ku sarrafa na'ura mai nisa, sanarwa na ainihin lokaci, da kuma kulawar abokin ciniki, tun daga kwamfutarku ko na'urar hannu. Saita shine toshe-da-wasa, ba tare da tura tashar jiragen ruwa ko adireshin DDNS da ake buƙata ba.
Don ƙara wannan na'urar zuwa asusun OvrC:
- Haɗa mai sarrafa CORE 1 zuwa Intanet.
- Kewaya zuwa OvrC (www.ovrc.com) kuma shiga cikin asusun ku.
- Ƙara na'urar (adireshin MAC da Sabis Tag lambobi da ake buƙata don tantancewa).
Shirya matsala
Sake saita zuwa saitunan masana'anta
Tsanaki! Tsarin dawo da masana'anta zai cire aikin Mawaƙin.
Don mayar da mai sarrafawa zuwa hoton tsohuwar masana'anta:
- Saka ƙarshen shirin takarda ɗaya cikin ƙaramin rami a bayan mai sarrafawa mai lakabin RESET.
- Latsa ka riƙe maɓallin SAKESET. Mai sarrafawa yana sake saiti kuma maɓallin ID ya canza zuwa ja mai ƙarfi.
- Riƙe maɓallin har sai ID ɗin ya haskaka orange sau biyu. Wannan ya kamata ya ɗauki daƙiƙa biyar zuwa bakwai. Maɓallin ID yana walƙiya orange yayin da masana'anta ke aiki. Lokacin da ya cika, maɓallin ID yana kashe kuma wutar lantarki na na'urar tana sake sake sakewa lokaci guda don kammala aikin dawo da masana'anta.
Lura: Yayin aikin sake saiti, maɓallin ID yana ba da amsa iri ɗaya kamar LED Caution a gaban mai sarrafawa.
Zagayowar wutar lantarki mai sarrafawa
- Latsa ka riƙe maɓallin ID na daƙiƙa biyar. Mai sarrafawa yana kashewa yana kunnawa.
Sake saita saitunan cibiyar sadarwa
Don sake saita saitunan cibiyar sadarwar mai sarrafawa zuwa tsoho:
- Cire haɗin wuta zuwa mai sarrafawa.
- Yayin latsawa da riƙe maɓallin ID a bayan mai sarrafawa, iko akan mai sarrafawa.
- Riƙe maɓallin ID har sai maɓallin ID ya zama orange mai ƙarfi kuma Lambobin Haɗin kai da Wutar Wuta suna da shuɗi mai ƙarfi, sannan a saki maɓallin nan da nan.
Lura: Yayin aikin sake saiti, maɓallin ID yana ba da amsa iri ɗaya kamar LED Caution a gaban mai sarrafawa.
Bayanin halin LED
Takardu / Albarkatu
 |
Control4 CORE1 Mai Kula [pdf] Jagoran Shigarwa CORE1, Mai sarrafawa, CORE1 Mai Sarrafa |
