CSS-MP-V15
SHIGA HW 1.0
Jagoran Shigarwa
Kunshin abun ciki
- Mai sarrafa x 1, bangon bango x 1, littafin mai amfani x 1, Screwdriver x 1, fakitin kit x 1 Kit fakitin: dunƙule x 4, dunƙule anchors x 4, diode (1N4004) x 1 4 pin USB x 1, 8 pin USB x 1, 9 pin na USB x 1
Girman bangon bango
Ƙayyadaddun bayanai
- Girma: 122.5 x 185 x 89 (mm)
- Wutar lantarki: 9-24VDC/1A
- Sadarwar Wiegand: Max zuwa mita 100
- R5485 sadarwa: Max zuwa mita 1000
- Nisa gane fuska: 50 - 100 cm
- Shigar bango: bayar da shawarar tsayin shigarwa 115 ~ 125 cm
umarnin shigarwa
Tsarin aikace-aikacen
(Terminal + CSS-A10 BOX)
(Terminal + CSS-All RELAY BOX)
* Goyan bayan samar da wutar lantarki na POE, kawai goyan bayan injin guda ɗaya, kulle kofa yana buƙatar ƙarin wutar lantarki *
Bayanin Gaban Tasha
Shigarwa
 |
Nasihar tsayin shigarwa | |
| Shigar da tsawo CM (Ƙasa na na'ura) | Gano masu amfani Tsawon CM |
|
| 115 | 153-190 | |
| 117 | 155-195 | |
| 119 | 157-200 | |
| 121 | 159-205 | |
| 123 | 161-210 | |
| 125 | 163-215 | |
Tsawon shigarwa shine yafi ga ɗan gajere Fuskar tana daidaitawa zuwa ƙananan gefen firam ɗin nuni
 |
 |
| Tsayin shigarwa shine yafi ga guntun mutane Nisan ganewa shine kusan 50-100cm Tsawon shigarwa da aka ba da shawarar daga ƙasan injin zuwa ƙasa shine kusan 115-125cm. | Da fatan za a sunkuyar da kan ku kadan yayin da kuke gane don inganta ƙimar nasarar tantancewa |
Yanayin shigarwa
Lokacin shigar da waje, kayan aikin hasken rana kai tsaye, kayan aikin hasken rana, ko kayan aikin hasken rana kai tsaye ta tagogi an hana su Lokacin shigar da cikin gida, tabbatar da cewa dole ne a shigar da wurin nesa da windows/kofofin / l.amps fiye da mita 2 nesa da kayan aiki.
Bayanin Tasha Baya
Tsarin kebul
Bayanin kebul
4 PIN
| 485- | GRAYYA | Don Akwatin Relay BF-50 |
| 485+ | BROWN | |
| VIN | JAN | DC 9-24V (1A) |
| GND | BAKI |
8 PIN
| ALARM-NC | JAWAN BAKI | 10 Mai watsa shiri Ƙararrawar Ƙararrawa/ Ring Relay |
| Ƙararrawa-A'A | FARAR BAYA | |
| ALARM-COM | GREEN BLACK | |
| Farashin 0WG | JAN FARI | WG Input Connect WG Reader |
| Farashin 1WG | BAKI FARIYA | |
| GND | BAKI | GND |
| LED | Orange | Sarrafa WG Reader LED / Buzzer Action |
| BUZZER | PINK BAKI |
9 PIN
| KOFAR-NC | YELU | Kofa Relay |
| KOFAR-A'A | FARIYA | |
| KOFAR-COM | GREEN | |
| fita | VIOLET | Maballin Fita |
| SENSOR | BLUE | Sensor kofa |
| WUTA | PINK | Ƙararrawar Wuta |
| GND | BAKI | GND |
| Farashin 0WG | GRAY BLUE | Rahoton da aka ƙayyade na WG |
| Farashin 1WG | ORANGE BAKI |
Gargadi na FCC
Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Bayanin Bayyanar Radiation
Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikinka.
Takardu / Albarkatu
 |
Fasahar Chiyu CSS-M-V1 Mai Kula da Gane Fuskar [pdf] Jagoran Shigarwa CS-CSS-M-V15, CSCSSMV15, ZDZCS-CSS-M-V15, ZDZCSCSSMV15, CSS-M-V1 Face Gane Mai Sarrafa, CSS-M-V1, Face Gane Mai Sarrafa |
