Chemtronics MDRAI302 Motsi Gane Motsi Module

Ƙarsheview

Wannan samfurin ƙirar ƙirar ƙira ce don ingantaccen ɗan adam ko ƙwarewar abu ta amfani da ginanniyar firikwensin RADAR. Gina-hannun abubuwan ganowa waɗanda ke ba da damar cikakken aikin na'urar mai cin gashin kai. Mai ganowa An ƙirƙira don aiki azaman firikwensin motsi na Doppler daga 61 zuwa 61.5 GHz (60.5 zuwa 6l GHz don ƙungiyar ISM ta Jafananci) .Ƙaramin 2-in-I ( firikwensin launi na RGB + IR mai karɓa) fakitin canja wurin epoxy ne mai haske akan jagorar. firam. Tsarin IR yana ba da kyakkyawan aiki ko da a cikin aikace-aikacen hasken yanayi da ke damun yanayi kuma yana ba da kariya daga bugun bugun da ba a sarrafa shi ba. firikwensin launi na RGB babban firikwensin haske na yanayi na dijital wanda ke canza haske zuwa fitowar siginar dijital. Firikwensin launi na RGB don gano hasken yanayi yana da buɗaɗɗen photodiodes 5 (ja, kore, shuɗi, m, IR). Makirifo da aka ɗora a saman samfurin ƙaramin ƙarfi ne mai ƙaramin ƙarfi na ƙasan silicone makirufo tare da fitowar PDM guda ɗaya. Wannan na'urar tana da babban aiki kuma ta dace da aikace-aikace kamar masu rikodin kiɗa da sauran na'urorin lantarki masu dacewa. Na'urar firikwensin launi yana gano ja, kore, shuɗi da fari. Hankali ga halayen ido na mutum. Yana ba da kyakkyawan ramuwa na zafin jiki. Ainihin aikin firikwensin launi shine tsarin umarni mai sauƙi na 12C ƙayyadaddun yarjejeniya. Na'urar accelerometer wani tsari ne na micromachine accelerometer wanda aka riga aka yi amfani dashi wajen samarwa a cikin masana'anta masu rugujewa da balagagge na dangin "femto" na ultra-low-power, high-performance 3- axis linear accelerometers. Akwai haɗe-haɗe-haɗe-haɗe-mataki 32 da aka rigaya, FIFO (na farko-cikin, farkon-fitar) tare da bayanai don masu amfani don iyakance Mai sarrafa Mai watsa shiri

Siffofin

• 60GHz Radar IC tare da watsawa ɗaya da naúrar karɓa ɗaya
• Eriya a cikin Kunshin (AiP) Radar IC
• CW da pulsed-CW yanayin aiki
• Haɗin PLL don Doppler da FMCW ramp tsara
• Launi (R,G,B,W) Sensor tare da Interface 12C
• 2-in-1 ALI (RGB firikwensin launi + mai karɓar IR)
• D-MIC(SPHO655LM4H-1)
• Na'urar accelerometer na micro-machine na dangin "femto".
• 38.4MHZ X-Tal

Aikace-aikace

• Smart TV kayan aiki

Module Sensor Gane Motsi samfuri ne da aka shigar a cikin aikace-aikacen bayan an ɗora shi akan firam ɗin a ainihin amfani.

 Ƙayyadaddun tsarin

 Siffar jiki

Abu	Ƙayyadaddun bayanai
Sunan samfur	Module Sensor Sensor
Sunan Samfura	MDRAI302
Hanyar sadarwa	61.251 GHz (ISM BAND) RADAR (DOPPLER)
Girma	35.00mm x 27.00mm x 1.4mm(T)
Nauyi	2.67 g
Nau'in hawa	FFC Connector(14Pin Header), Screw (1 Hole)
Aiki	Sensor Acceleration, MIC, 2-in-1 ALI, Sensor Launi
Mutual na mutumin da ake ba da shaida	Abubuwan da aka bayar na CHEMTRONICS Co., Ltd
Mai ƙera / ƙasar ƙera	CHEMTRONICS Co., Ltd. / Koriya ta Kudu
Ranar da aka yi	Alama daban
Lambar Shaida	–

Bayanin Pin

Pin A'a.	Sunan Pin	Nau'in	Aiki	Pin A'a.	Sunan Pin	Nau'in	Aiki
1	IRRR_1B	I	Karɓar Siginar IR	2	3.3_PW	P	INPUT 3.3V
3	MCU_M_DET_OUT_1B	I/O	Karanta siginar Ganewa	4	R_SCL1_TV_1B	I/O	MCU_I2C_SCL
5	R_SDA1_TV_1B	I/O	MCU_I2C_SDA	6	MIC_SWITCH_1B	I/O	MIC_ Ikon Wuta
7	R_SCL2_TV	I/O	Sensor_I2C_SCL	8	R_SDA2_TV	I/O	Sensor_I2C_SDA
9	MCU_RESET_1B	O	MCU_RESET	10	R_MIC_DATA_1B	I/O	MIC_I2C_SDA
11	R_MIC_CLK_1B	I/O	MIC_I2C_CLK	12	GND	P	Digital Ground
13	R_LED_STB_OUT_1B	P	RED LED Control	14	KEY_INPUT_R_1B	I	MAGANAR KYAUTA

Ƙayyadaddun Module

SUMMERY KYAUTA

Abu	P/N	Bayani
Radar IC	Saukewa: BGT60LTR11AiP	- Ƙananan Ƙarfin 60GHz Doppler Radar Sensor
MCU	Saukewa: XMC1302-Q024X006	- 8 kbytes akan guntu ROM - 16 kbytes akan guntu mai sauri SRAM - har zuwa 200 kbytes akan-chip Flash shirin da ƙwaƙwalwar bayanai
LDO	LP590715QDQNRQ1	- Motoci 250-mA – Ultra-Low-Amo, Low-IQ LDO
X-TAL	X.ME Saukewa: 112HJVF0038400000	Saukewa: XME-SMD2520 - 38.400000 MHz - 12 PF / 60ohms
FET	2N7002K	– Karamin siginar MOSFET - 60V, 380 mA, Single, N-Channel, SOT-23
MATAKI MAI GIRMA	Saukewa: SN74AVC4T245RSVR	- Transceiver Bus Dual-Bit tare da Configurable Voltage Fassarar da Fitowar Jiha 3
MIC	Saukewa: SPH0655LM4H-1	- Ƙananan Ruɗi / Babban AOP - Ƙananan Amfani na Yanzu a Yanayin Ƙarfin Ƙarfin Ƙarfi – Amsar Mitar Lantarki
HANYAR ARZIKI	LIS2DWLTR	- Ƙarƙashin amo: ƙasa zuwa 1.3 MG RMS a cikin ƙananan ƙarfin Yanayin – wadata voltage, 1.62 zuwa 3.6 V - Babban saurin I2C / SPI fitarwa na dijital
2-in-1 ALI	Saukewa: J315XRHH-R	- Kayan aiki Voltage: Mai karɓar IR (6.0V), Sensor launi na RGB (3.6V) - Kayan aiki na Yanzu: Mai karɓar IR (1.0mA), Sensor launi RGB (20mA) - Tace ta ciki don babban mitar mai walƙiya lamp - Goyan bayan sokewar haske ta atomatik
Sensor Launi	Saukewa: RCS-D6C6CV-R	-i2c dubawa - Gano launuka R, G, B, W
SLIDE S/W	Saukewa: JS6901EM	- Ana amfani da wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun juyawa na kewayawa na yanzu don kayan lantarki.
HANYAR S/W	Saukewa: DHT-1187AC	–

Ƙimar Lantarki

Siga	Bayani	Min.	Buga	Max.	Raka'a
Ƙara Voltage		3.0	–	5.5	V
Aiki Yanzu	RMS	–	–	65	mA

Bayanin Muhalli

Abu	Ƙayyadaddun bayanai
Ajiya Zazzabi	-25 ℃ zuwa + 115 ℃
Yanayin Aiki	-10 ℃ zuwa + 80 ℃
Humidity (Aiki)	85% (50 ℃) dangi zafi
Jijjiga (Aiki)	5 Hz zuwa 500 Hz sinusoidal, 1.0G
Sauke	Babu lalacewa bayan digo 75cm akan bene na kankare
ESD [Electrostatic fitarwa]	+/- 0.8 kV Samfurin Jikin Dan Adam (JESD22-A114-B)

  Bayanin RF

 Halayen tsarin

Siga	Sharadi	Min.	Buga	Max.	Raka'a
Mitar da ake watsawa (EU ISM BAND)	Vtune = VCPOUTPL		61.251		GHz
Zubar da Zuciya <40GHz				-42	dBm
Zubar da Zuciya > 40GHz da <57GHz				-20	dBm
Zubar da Zuciya > 68GHz da <78GHz				-20	dBm
Zubar da Zuciya > 78GHz				-30	dBm

 Halayen Antenna

Siga	Yanayin Gwajin	Min.	Buga	Max.	Raka'a
Tsawon Mitar Aiki			61.251		GHz
Mai watsa Eriya Gain	@ Freq = 61.25GHz		6.761		dBi
Mai karɓa Eriya Gain	@ Freq = 61.25GHz		6.761		dBi
Horizontal -3Db Beamwidth	@ Freq = 61.25GHz		80		Deg
A tsaye -3dB Nisa	@ Freq = 61.25GHz		80		Deg
Matsakaicin gefen gefe	@ Freq = 61.25GHz		12		dB
Matsewar gefelobe na tsaye	@ Freq = 61.25GHz		12		dB
Warewar TX-RX	@ Freq = 61.25GHz		35		dB

Module Majalisar

A kula kar a lalata tsarin a lokacin da kuke harhada ko tarwatsewa. Idan ka danna RADAR IC da yawa, shi
na iya shafar aikin gabaɗaya.

FCC MODULAR BAYANIN YARDA DA EXAMPLES 

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
   HANKALICanje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
   NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 ko Dokokin FCC. Ihese imits an ƙera su ne don ba da kariya mai ma'ana daga cutar da kutsawa cikin shigarwar mazaunin. Wannan kayan aikin 8 yana haɓaka amfani kuma yana iya haskaka wutar lantarki ta rediyo kuma, ban shigar da ni ba kuma an yi amfani da ni daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa rashin lafiya na tsaka-tsakin ba zai faru a cikin wani shigarwa na musamman ba. idan wannan kayan aikin ya haifar da tsangwama ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
  Bayanin Bayyanar Radiation na FCC:
  Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.

Umarnin Haɗin kai OEM

An yi nufin wannan na'urar don masu haɗin gwiwar OEM kawai a ƙarƙashin waɗannan sharuɗɗa masu zuwa: Dole ne a shigar da ƙirar a cikin kayan aiki kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani, kuma ƙirar mai watsawa ba za ta kasance tare da kowane mai watsawa ko eriya ba. . Za a yi amfani da na'urar ne kawai tare da eriyar ciki ta kan jirgi wacce aka fara gwadawa kuma an tabbatar da ita tare da wannan tsarin. Ba a tallafawa eriya na waje. Muddin waɗannan sharuɗɗa 3 na sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu). Ƙarshen samfurin na iya buƙatar Gwajin Tabbaci, Bayanin Gwajin Halatta Canjin Class Il ko sabon Takaddun shaida. Da fatan za a haɗa da ƙwararren takardar shedar FCC don tantance abin da zai dace daidai da samfurin ƙarshen.
Ingancin amfani da takaddun shaida:
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (ror exampwasu abubuwan haɗin kwamfutar tafi-da-gidanka ko haɗin gwiwa tare da wani mai watsawa), to, izinin FCC na wannan ƙa'idar a hade tare da kayan aikin rundunar ba'a la'akari da inganci kuma ba za a iya amfani da ID na FCC na module ɗin akan samfurin ƙarshe ba. A cikin waɗannan abubuwan, mai haɗin OEM zai ɗauki alhakin sake kimanta ƙarshen samfurin (ciki har da mai watsawa) da kuma samun keɓancewar FC FC. A irin waɗannan lokuta, da fatan za a haɗa da ƙwararren takardar shedar Fc don tantance idan Canjin Class II Mai Izinin ko ana buƙatar sabon Takaddun shaida.
Haɓaka Firmware:
Software da aka tanadar don haɓaka firmware ba zai iya rinjayar kowane sigogi na RF kamar yadda aka tabbatar da FCC tor wannan module, don hana abubuwan da aka yarda da su.
Ƙarshen alamar samfur:
An ba da izinin wannan tsarin mai watsawa kawai don amfani a cikin na'ura inda za'a iya shigar da eriya ta yadda za'a iya kiyaye 20 cm tsakanin eriya da masu amfani. Dole ne a yi wa samfurin ƙarshe lakafi a wuri mai ganuwa tare da mai zuwa: "Ya ƙunshi ID na FCC: A3LMDRAI302".

Bayanin da dole ne a sanya shi a cikin jagorar mai amfani na ƙarshe:
Mai haɗin OEM dole ne ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF ɗin a cikin littafin jagorar ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.

FCC MODULAR BAYANIN YARDA DA EXAMPLES

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
   HANKALI: Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
   NOTE: An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa maɓalli a kan wani kewaye daban da wanda aka haɗa mai karɓar ku zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
  GARGADI
  Canje-canje ko gyare-gyaren da masana'anta suka yarda da su na iya ɓata ikon mai amfani don sarrafa kayan aiki.
  “HANKALI: Bayyanawa ga Mitar Radiyo.
  Za a saka eriya ta irin wannan hanya don rage yuwuwar hulɗar ɗan adam yayin aiki na yau da kullun. Bai kamata a tuntuɓar eriya yayin aiki don guje wa yuwuwar ƙetare iyakar fiddawar mitar rediyo na FCC.

Bayanin IC

Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aiki ya dogara da
bin sharadi guda biyu:

1.  wannan na'urar bazai haifar da tsangwama ba, kuma
2.  dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
   Dole ne a yi wa samfurin ƙarshen lakabi don nuna lambar takardar shedar masana'antar Kanada na ƙirar. Ya ƙunshi nau'in watsawa IC: 649E-MDRAI302
   Bayani ga OEM Integrator
   Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin yanayi masu zuwa:
   1. Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani, da
   2. Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
      Ƙarshen lakabin samfurin Alamar ƙarshen samfurin dole ne ya ƙunshi ID na FCC: A3LMDRAI302, Ya ƙunshi IC: 649E-MDRAI302 ″.
      “TSANANIN: Bayyanawa zuwa Mitar Radiyo. Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikinka. An ba da izinin wannan tsarin mai watsawa kawai don amfani a cikin na'ura inda za'a iya shigar da eriya ta yadda za'a iya kiyaye 20 cm tsakanin eriya da masu amfani.

 Jerin dokokin FCC masu aiki

Lissafin dokokin FCC waɗanda suka dace da mai watsawa na zamani. Waɗannan su ne ƙa'idodi waɗanda ke kafa ƙa'idodin aiki na musamman, ƙarfi, hayaki mai ɓarna, da aiki na yau da kullun. KADA KA lissafta bin ka'idodin radiyo na rashin niyya (Sashe na 15 Ƙarshe na B) tunda wannan ba shine sharadi na tallafin ƙirar ba wanda aka ƙaddamar ga mai ƙira. Duba kuma Sashe na 2.10 na ƙasa game da buƙatun sanar da masana'antun baƙi cewa ana buƙatar ƙarin gwaji.3
Bayani: Wannan tsarin ya dace da bukatun FCC sashi na 15C(15.255).

Taƙaita takamaiman yanayin amfani na aiki

Bayyana sharuɗɗan amfani waɗanda suka dace da na'urar watsawa na zamani, gami da na exampko kowane iyaka akan eriya, da sauransu. Misaliample, idan an yi amfani da eriya-to-point waɗanda ke buƙatar rage ramuwa na ramuwa don asarar kebul, to dole ne wannan bayanin ya kasance cikin umarnin. idan iyakokin yanayin amfani ya ƙaru zuwa ƙwararrun masu amfani, to dole ne umarnin ya bayyana cewa wannan bayanin kuma ya wuce zuwa littafin jagorar mai sana'anta. Bugu da kari, ana iya buƙatar wasu bayanai, kamar riba mafi kololuwa a kowane rukunin mitar da mafi ƙarancin riba, musamman don manyan na'urori a cikin ƙungiyoyin DFS 5 GHz.
Bayani: EUT tana da Eriya Chip, kuma eriyar tana amfani da eriya na dindindin wanda ba za a iya maye gurbinsa ba.

Hanyoyi masu iyakataccen tsari

idan aka amince da na'urar watsawa ta zamani azaman ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai, to, mai sarrafa na'ura yana da alhakin amincewa da mahallin masaukin da ake amfani da ƙayyadaddun module da shi. Dole ne mai ƙira na ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun tsarin dole ne su bayyana, duka a cikin shigarwa da kuma a cikin umarnin shigarwa, madadin yana nufin cewa ƙayyadadden ƙirar ƙirar yana amfani da shi don tabbatar da cewa mai watsa shiri ya cika buƙatun da suka dace don gamsar da ƙayyadaddun tsarin. Ƙaƙƙarfan masana'anta yana da sassauci don ayyana madadin hanyar sa don magance sharuɗɗan da ke iyakance amincewar farko, kamar: garkuwa, ƙaramar sigina. amplitude, buffered modulation/tatainputs, ko ka'idojin samar da wutar lantarki. Madadin hanyar zata iya haɗawa da cewa mai ƙayyadaddun ƙirar ƙirar reviewcikakken bayanan gwaji ko ƙirar runduna kafin ba da izinin masana'anta. Wannan ƙayyadadden ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanan RF ne lokacin da ya zama dole don nuna yarda a cikin takamammen runduna. Dole ne mai ƙirar ƙirar ya bayyana yadda za a kiyaye ikon samfurin da za a shigar da na'urar watsawa a cikinsa ta yadda za a tabbatar da cikakken yarda da samfurin koyaushe. Don ƙarin runduna ban da takamaiman rundunar da aka samo asali tare da ƙayyadaddun tsari, ana buƙatar canji mai ƙyalli na Class Il akan kyautar module don yin rijistar ƙarin rundunar a matsayin takamaiman mai watsa shiri wanda kuma aka amince dashi tare da tsarin.

Bayani: Bayyanannun umarni na musamman waɗanda ke bayyana yanayin,
iyakoki da matakai don wasu kamfanoni don amfani da/ko haɗa tsarin cikin na'ura mai masaukin baki
(duba cikakkun umarnin haɗin kai a ƙasa).
Gyara

Bayanan shigarwa

1. Kayayyakin misaliampLe kamar haka: Ya kamata samfurin mai watsa shiri ya ba da ikon da aka tsara na 1.5 V, 3.0-5.5 VDC zuwa module.
2. Tabbatar cewa an shigar da ƙirar ƙirar daidai.
3. Tabbatar cewa tsarin ba ya ƙyale masu amfani su maye gurbin ko rushewa
4. Module da aka ƙayyade samfur ne da aka shigar a cikin aikace-aikacen bayan an ɗora shi akan firam ɗin a ainihin amfani. Frame wani ɓangaren garkuwa don rufe tsarin.

Alamar ƙirar eriya

Don mai watsawa na zamani tare da ƙirar eriya, duba jagora a cikin Tambaya ta 11 na KDB Publication 996369 DO2 FAQModules don Micro-Strip Eriya da burbushi. Bayanin haɗin kai zai ƙunshi don sake TCBview umarnin haɗin kai don abubuwa masu zuwa: shimfidar ƙirar ƙira, jerin sassan (BOM), eriya, masu haɗawa, da buƙatun keɓewa.

1. Bayanin da ya haɗa da bambance-bambancen da aka halatta (misali iyakokin iyaka, kauri, tsayi, faɗi, siffa (s), madaurin wuta, da rashin ƙarfi kamar yadda ya dace ga kowane nau'in eriya);
2. Kowace ƙira za a yi la'akari da nau'i daban-daban (misali, tsawon eriya a cikin (s) da yawa na mita, tsayin raƙuman ruwa, da siffar eriya (alamu a lokaci) na iya rinjayar ribar eriya kuma dole ne a yi la'akari;
3. Za a samar da sigogi ta hanyar ba da izini ga masana'antun masauki don tsara shimfidar allon allon bugawa (PC);
4. Abubuwan da suka dace ta masana'anta da ƙayyadaddun bayanai;
5. Hanyoyin gwaji don tabbatar da ƙira; da hanyoyin gwajin samarwa don tabbatar da yarda. Mai ba da kyautar module ɗin zai ba da sanarwar cewa duk wani sabani (s) daga ƙayyadaddun sigogi na alamar eriya, kamar yadda aka bayyana ta umarnin, yana buƙatar mai sarrafa kayan aikin dole ne ya sanar da mai ba da kyautar module cewa suna son canza ƙirar eriya. A wannan yanayin, ana buƙatar aikace-aikacen canji na Class Il don zama filed ta mai bayarwa, ko masana'anta na iya ɗaukar nauyi ta hanyar canji a cikin FCC ID (sabon aikace-aikacen) tsarin da aikace-aikacen canji na Class lI ke biye da shi. Bayani: Ee, Modubul ɗin tare da ƙirar eriyar alama, kuma An nuna wannan littafin jagorar ƙirar ƙira, eriya, masu haɗawa, da buƙatun keɓewa.

 Abubuwan la'akari da bayyanar RF

Yana da mahimmanci ga masu ba da kyauta a sarari su bayyana yanayin bayyanar RF a sarari da ke ba da izinin masana'anta samfurin masauki don amfani da tsarin. Ana buƙatar nau'ikan umarni guda biyu don bayanin bayyanar RF: (1) zuwa ga masana'anta samfurin, don ayyana yanayin aikace-aikacen (wayar hannu, xx cm mai ɗauka daga jikin mutum); da (2) ƙarin rubutu da ake buƙata don masana'anta samfurin mai watsa shiri don samarwa don kawo ƙarshen masu amfani a cikin littattafan samfuran ƙarshen su. Idan ba a bayar da bayanan bayyanar RF da sharuɗɗan amfani ba, to ana buƙatar masana'anta samfurin mai watsa shiri don ɗaukar nauyin ƙirar ta canji a FCC ID (sabon aikace-aikace). Bayani: Wannan tsarin ya dace da iyakokin fiddawa na FCC RF da aka tsara don yanayin da ba a sarrafa shi, Wannan kayan aikin yakamata a shigar da sarrafa shi tare da mafi ƙarancin nisa na santimita 20 tsakanin radiyo da jikin ku. An ƙirƙira wannan ƙirar don yin biyayya ga Bayanin FCC fcc shine.

Antenna

Dole ne a samar da jerin eriya da aka haɗa a cikin aikace-aikacen takaddun shaida a cikin umarnin. Don masu watsawa na yau da kullun da aka amince da su azaman ƙayyadaddun kayayyaki, duk umarnin mai sakawa ƙwararru dole ne a haɗa su azaman ɓangare na bayanin zuwa ga masana'anta samfurin. Lissafin eriya kuma za su gano nau'ikan eriya (monopole, PIFA, dipole, da sauransu.ampba a la'akari da eriya ta "omni-directional" a matsayin takamaiman "nau'in eriya). Don yanayi inda masana'anta samfurin ke da alhakin mai haɗin waje, misaliamptare da fil ɗin RF da ƙirar ƙirar eriya, umarnin haɗin kai zai sanar da mai sakawa cewa dole ne a yi amfani da mahaɗin eriya na musamman akan Sashe na 15 masu watsa izini da aka yi amfani da su a cikin samfurin mai masaukin baki. Masu kera na'ura za su samar da jerin masu haɗin haɗin gwiwa na musamman. Bayani: EUT tana da Eriya Chip, kuma eriya tana amfani da eriya ta dindindin wanda ke da alaƙa.

Alamar alama da bayanin yarda

Masu ba da tallafi suna da alhakin ci gaba da bin ƙa'idodin su ga dokokin FCC. Wannan ya haɗa da ba da shawara ga masana'antun samfuran baƙi cewa suna buƙatar samar da tambarin zahiri ko e-label mai faɗi "Ya ƙunshi ID na FCC tare da ƙãre samfurinsu. Dubi Sharuɗɗa don Lakabi da Bayanin Mai Amfani don Na'urorin RF KDB Publication 784748. Bayani:Tsarin mai masaukin da ke amfani da wannan tsarin, yakamata ya kasance da lakabin a fili a fili yana nuna rubutun masu zuwa: "Ya ƙunshi FCC ID: A3LMDRAI302, Ya ƙunshi IC: 649E-MDRAI302"

Bayani kan hanyoyin gwaji da ƙarin buƙatun gwaji

Ana ba da ƙarin jagora don gwada samfuran baƙi a cikin KDB Publication 996369 D04 Jagorar Haɗin Module. Ya kamata hanyoyin gwaji suyi la'akari da yanayin aiki daban-daban don mai watsawa na zamani a cikin runduna, da kuma tarwatsa mahara masu watsawa lokaci guda ko wasu masu watsawa a cikin samfurin rundunar. Ya kamata wanda aka ba da kyauta ya ba da taƙaitaccen bayani kan yadda ake saita hanyoyin gwaji don ƙimar samfurin mai masaukin baki don yanayin aiki daban-daban don watsawa na zamani a cikin runduna, tare da yawa, na'urorin watsawa lokaci guda ko wasu masu watsawa a cikin rundunar. Masu ba da tallafi na iya haɓaka amfanin masu watsa su na zamani ta hanyar samar da hanyoyi na musamman, hanyoyi, ko umarni waɗanda ke kwaikwaya ko keɓanta haɗin kai ta hanyar kunna mai watsawa. Ihis na iya 8reatly Simpiry ƙudirin masana'anta cewa samfurin kamar yadda aka shigar a cikin runduna ya cika buƙatun FCC.
Bayani: Babban bandeji na iya haɓaka amfanin masu watsa shirye-shiryen mu na yau da kullun ta hanyar samar da umarni waɗanda ke kwaikwaya ko keɓance haɗin kai ta hanyar kunna mai watsawa.

Ƙarin gwaji, Sashe na 15 Ƙarƙashin Ƙaƙwalwar Sashe na B

Ya kamata wanda aka ba da kyauta ya haɗa da sanarwa cewa mai watsawa na zamani FCC ne kawai aka ba da izini don takamaiman sassa na ƙa'ida (watau, dokokin watsawa na FCC) da aka jera akan kyautar, kuma mai ƙirar samfurin yana da alhakin bin duk wasu dokokin FCC da suka shafi mai masaukin baki ba a rufe shi da kyautar ba da takaddun shaida na zamani. Idan mai ba da kyauta ya tallata samfuran su azaman Sashe na 15 Subpart B mai yarda (lokacin kuma ya ƙunshi da'irar dijital-radiator ba da gangan ba), to mai bayarwa zai ba da sanarwar cewa samfurin ƙarshe na ƙarshe yana buƙatar gwajin yarda da Sashe na 15 Subpart B tare da shigar da na'urar watsawa ta zamani. .
Bayani: Module ba tare da gangan-radiator dijital circuity, don haka module ba ya bukatar wani kimanta ta FCC Part 15 Subpart B. Mai watsa shiri shoule za a kimanta ta FCC Subpart B.

Takardu / Albarkatu

Chemtronics MDRAI302 Motsi Gane Motsi Module [pdf] Manual mai amfani MDRAI302, A3LMDRAI302, MDRAI302 Motsi Gane Sensor Module, Motion Gane Sensor Module

Magana

• Manual mai amfani