Abubuwan da ke ciki boye
1 Module Interface Interface Mai ɗauka SYSTXCCNIM01 Infinity Network
2 Bayanin samfur
3 Shigarwa
4 FAQ
5 HANYOYIN TSIRA
6 GABATARWA
7 SHIGA
8 TSIRIN FARA
9 MALAMAI LED
10 FUSE
11 24 VAC POWER SOURCE
12 Takardu / Albarkatu
12.1 Magana

Mai ɗauka-LOGO

Module Interface Interface Mai ɗauka SYSTXCCNIM01 Infinity Network

Mai ɗauka-SYSTXCCNIM01-Infinity-Network-Infinity-Infinity-Module-PRODUCT

Bayanin samfur

Ƙayyadaddun bayanai

  • Sunan samfur: Module Fannin Sadarwar Sadarwar Sadarwar SYSTXCCNIM01
  • Lambar samfurin: A03231
  • Daidaitawa: Tsarin Infinity
  • Sadarwa: Hanyoyin sadarwa tare da bas ɗin Infinity ABCD
  • Da ake buƙata don Sarrafa:
    • Maida Heat Ventilator (HRV/ERV)
    • Famfu mai zafi mai saurin sadarwa mara sadarwa tare da Tanderun Infinity (aikatun mai guda biyu kawai)
    • Naúrar waje mai sauri biyu mara sadarwa (R-22 Series-A unit)

Shigarwa

La'akarin Tsaro

Kafin fara shigarwa, da fatan za a karanta dukan jagorar koyarwa. Alamar "->" tana nuna canji tun fitowar ta ƙarshe.

Duba Kayan aiki da Wurin Aiki

Kafin shigarwa, duba kayan aiki da file da'awar tare da kamfanin jigilar kaya idan jigilar kaya ta lalace ko bai cika ba.

Wuraren Fassarar da La'akarin Waya

Lokacin nemo Module Interface Module (RIM), zaɓi wuri kusa da Infinity oven ko fan coil inda wayoyi daga kayan aiki zasu iya haɗuwa cikin sauƙi. Kar a dora RIM a cikin naúrar waje kamar yadda aka amince da shi don amfanin cikin gida kawai kuma bai kamata a fallasa shi ga abubuwa ba. A guji hawan RIM akan ma'auni, aikin bututu, ko juyewa da tanderun don hana lalacewar kayan aiki ko aiki mara kyau.

Shigar da Abubuwan

Bi la'akarin wayoyi a ƙasa:

  • Yi amfani da waya mai zafi na yau da kullun don haɗa tsarin Infinity System. Kebul ɗin garkuwa ba lallai bane.
  • Don shigarwa na yau da kullun, yi amfani da 18 – 22 AWG ko waya mafi girma.
  • Tabbatar cewa duk wayoyi sun bi ka'idodin ƙasa, na gida, da na jiha.

Wurin lantarki (HRV/ERV).

Bi umarnin waya da aka bayar a cikin littafin shigarwa na HRV/ERV don haɗa na'urar iska zuwa Module Interface Interface.

Mai Dual Fuel Tare da Waya Wuta Mai Saurin Zafi 1

Koma zuwa zanen wayoyi na aikace-aikacen mai guda biyu a cikin littafin shigarwa don haɗa fam ɗin zafi mai sauri guda ɗaya mara sadarwa tare da Infinity makera zuwa Module Interface Module.

Raka'a Cikin Gida Infinity Tare da Waya Wuta Mai Sauri 2

Koma zuwa zanen wayoyi na musamman zuwa raka'a na cikin gida Infinity da naúrar waje mara saurin sadarwa (R-22 Series-A unit) a cikin littafin shigarwa don haɗa su zuwa Module Interface Module.

Tsarin Fara-Up

Da zarar an gama shigarwa, bi matakan da ke ƙasa don fara tsarin:

LED Manuniya

Kula da alamun LED akan Module Interface Module don kowane lambobin kuskure ko alamun matsayi. Koma zuwa jagorar mai nuna alamar LED a cikin littafin shigarwa don gyara matsala.

Fuse

Duba fis akan Module Interface Interface. Idan fis ɗin ya busa, maye gurbin shi da fiusi mai ƙima iri ɗaya.

24 VAC Power Source

Tabbatar an haɗa tushen wutar lantarki 24 VAC zuwa Module Interface Module don aiki mai kyau.

FAQ

Tambaya: Wadanne na'urori ne Module Interface Module za a iya sarrafa su?

A: Module Interface Module na iya sarrafa Heat farfadowa da na'ura Ventilators (HRV / ERV), wadanda ba sadarwa guda-gudun zafi famfo tare da Infinity tanda (ga dual man fetur aikace-aikace kawai), da kuma wadanda ba sadarwa biyu-gudun waje raka'a (R-22 Series). -A raka'a).

Tambaya: Shin za a iya shigar da Module na Interface Module a waje?

A: A'a, Module Interface Module an yarda dashi don amfani cikin gida kawai kuma bai kamata a taɓa shigar dashi tare da kowane ɓangaren sa da aka fallasa ga abubuwan ba.

Tambaya: Wane nau'in waya ya kamata a yi amfani da shi don haɗa tsarin Infinity?

A: Wayar thermostat ta al'ada ita ce manufa don haɗa tsarin Infinity System. Kebul ɗin garkuwa ba lallai bane. Yi amfani da 18 - 22 AWG ko waya mafi girma don shigarwa na yau da kullun.

NOTE: Karanta duk littafin koyarwa kafin fara shigarwa.
Wannan alamar ➔ tana nuna canji tun fitowar ta ƙarshe.

HANYOYIN TSIRA

Karanta kuma bi umarnin masana'anta a hankali. Bi duk lambobin lantarki na gida yayin shigarwa. Duk wayoyi dole ne su dace da lambobin lantarki na gida da na ƙasa. Rashin ingantattun wayoyi ko shigarwa na iya lalata Tsarin Kula da Infinity. Gane bayanin aminci. Wannan ita ce alamar faɗakarwar aminci ~ . Lokacin da kuka ga wannan alamar akan kayan aiki da a cikin jagorar koyarwa, ku kasance a faɗake ga yuwuwar cutar da mutum. Fahimtar kalmomin siginar HADARI, GARGADI. da HANKALI. Ana amfani da waɗannan kalmomi tare da alamar faɗakarwa. HATTARA yana gano haɗari mafi girma. wanda zai haifar da mummunan rauni ko mutuwa. GARGADI yana nufin haɗari, wanda zai iya haifar da rauni ko mutuwa. Ana amfani da HANKALI don gano ayyuka marasa aminci, waɗanda zasu haifar da ƙaramin rauni na mutum ko lalacewar samfur da kadarori. Ana amfani da NOTE don haskaka shawarwari waɗanda zasu haifar da ingantaccen shigarwa. dogara. ko aiki.

GABATARWA

Ana amfani da Module Interface Module (NIM) don mu'amala da na'urori masu zuwa zuwa bas ɗin Infinity ABCD ta yadda Infinity System zai iya sarrafa su. Na'urori masu zuwa ba su da ikon sadarwa kuma ana buƙatar NIM don sarrafawa:

  • A Heat farfadowa da na'ura Ventilator Energy farfadowa da na'ura Ventilator (HRV/ERV) (lokacin da ba a yi amfani da zoning).
  • Famfu mai zafi mai saurin sadarwa mara sadarwa tare da Infinity makera (aikin mai guda biyu kawai).
  • Naúrar waje mai sauri biyu mara sadarwa (R-22 Series-A unit).

SHIGA

  • Mataki 1-Duba Kayan aiki da Wurin Aiki
    BINCIKE KYAUTA'\IENT - File da'awar tare da shipping kamfanin.
    kafin shigarwa, idan kaya ya lalace ko bai cika ba.
  • Mataki na 2-Bayanin Wuri da La'akarin Waya
    GARGADI
    LANTARKI AL SHOCK HAZARD
    Rashin bin wannan gargaɗin na iya haifar da rauni na mutum ko lahani na kayan aiki.
    Cire haɗin wuta kafin fara shigarwa.

    NOTE: Duk wayoyi dole ne su bi na ƙasa. na gida. da lambobin jiha.

    GANE INTERFACE NETWORK '\IODULE (NIM)
    Zaɓi wuri kusa da Tanderun Infinity ko murhun fanka inda wayoyi daga kayan aiki zasu iya haɗuwa cikin sauƙi.
    NOTE: Kar a hau NIM a naúrar waje. An amince da NIM don amfani na cikin gida kawai kuma bai kamata a taɓa sanya shi tare da kowane kayan aikin sa da aka fallasa ga abubuwan ba.
    Ana iya shigar da NIM a kowane yanki inda zafin jiki ya kasance tsakanin 32° da 158°F. kuma babu taso. Ka tuna cewa damar yin amfani da wayoyi mai yiwuwa shine mafi mahimmancin la'akari.

    HANKALI
    HAZARAR AIKIN LANTARKI
    Rashin bin wannan taka tsantsan zai haifar da lalacewar kayan aiki ko aiki mara kyau.
    Don hana yiwuwar lalacewa ga NIM. kada ku hau kan plenum. aikin bututu. ko ja da tanderu.

    HUKUNCIN WIRING - Waya na yau da kullun na su10stat yana da kyau lokacin da ake haɗa Infinity System (kebul ɗin garkuwa ba lallai ba ne). Yi amfani da 18-22 AWG ko mafi girma don shigarwa na yau da kullun. Tsawon tsayi sama da I 00 ft. yakamata yayi amfani da 18 A WG ko waya mafi girma. Yanke ko ninka baya sannan a buga kowane madugun da ba a buƙata ba. Shirya hanyar zagayawa da wayoyi da wuri don guje wa yiwuwar matsaloli daga baya.

    NOTE: Wutar bas ta ABCD tana buƙatar haɗin waya huɗu kawai:
    duk da haka, yana da kyau a yi aiki da kebul na thermostat mai sama da wayoyi huɗu a yayin da waya ta lalace ko ta karye yayin shigarwa.
    Ana ba da shawarar lambar launi mai zuwa don kowace haɗin motar ABCD:
    A - Green ~ Data A
    B - Yellow~ Data B
    C - Fari ~ 24V AC (Na kowa)
    D - Ja ~ 24V AC (mai zafi)

    Ba dole ba ne a yi amfani da lambar launi da ke sama, amma kowane mai haɗin ABCD a cikin tsarin: \ IUST a haɗa shi akai-akai.

    NOTE:     Rashin amfani da wayoyi na mahaɗin ABCD zai haifar da Infinity System yayi aiki ba daidai ba. Bincika don tabbatar duk wayoyi sun yi daidai kafin a ci gaba da shigarwa ko kunna wuta.

  • Mataki na 3- Shigar da Abubuwan
    SHIGA INTERFACE NETWORK:\IODULE – Shirya hanyar zagaya waya kafin hawa. An ƙera Module ɗin Infinity Network Interface Module ta yadda wayoyi za su iya shigar da shi daga gefe.
    • Cire murfin saman sannan a hau NIM zuwa bango ta amfani da sukurori da anka na bango da aka tanadar.
  • Mataki na 4-Ventilator (HRV/ERV) Waya
    HRV / ERV INSTALLATION - NIM na iya sarrafa mai ɗaukar Heat farfadowa da na'ura Ventilator Energy farfadowa da na'ura (HRV ERV). Haɗa wayoyi huɗu daga allon kula da iska (duba umarnin shigarwa na iska don cikakkun bayanai) zuwa mai haɗawa mai lakabi (YRGB). Wannan lakabin yana gano launi na waya don dacewa da launukan wayar iska (Y~rawaya, R~ ja, G~ kore, B~blue ko baki). Duba hoto na 2 don haɗin iska (HRV ERV).

    Mai ɗauka-SYSTXCCNIM01-Infinity-Network-Infinity-Interface-Module-FIG-1

    NOTE: Idan tsarin yanki ne ( ya ƙunshi Infinity Damper Control Module), ana iya haɗa na'urar hurawa ko dai kai tsaye zuwa Damper Control module ko zuwa NIM. A kowane hali, Infinity Zone Control zai gano da kyau na'urar iska.

  • Mataki na 5- Man Fetur mai Dual tare da Waya Wuta mai Gudu 1
    DUAL FVEL INSTALLATION WITH I-SPEED HEAT PUMP - Ana buƙatar NIM lokacin da wutar lantarki mai saurin canzawa ta Infinity 1s da aka yi amfani da famfo mai zafi guda ɗaya (marasa sadarwa). Duba hoto na 3 don cikakkun bayanai na wayoyi. An
    firikwensin zafin iska na waje:\IUST a haɗa shi zuwa allon kula da tanderun don aiki mai kyau (duba hoto 5 don cikakkun bayanai).

    Mai ɗauka-SYSTXCCNIM01-Infinity-Network-Infinity-Interface-Module-FIG-3Mai ɗauka-SYSTXCCNIM01-Infinity-Network-Infinity-Interface-Module-FIG-2 Mai ɗauka-SYSTXCCNIM01-Infinity-Network-Infinity-Interface-Module-FIG-4

  • Mataki na 6-lnfinity Unit Unit tare da Waya Wuta Mai Sauri Biyu

    2-Speed ​​NO-CO:\I:\IU: \” ICATING WAJEN RANA'AR -
    NIM na iya sarrafa na'urar kwandishan mai saurin sadarwa mai sauri 2 ko famfo mai zafi (R-22 Series-A unit) tare da rukunin cikin gida Infinity. Duba hoto na 4 don cikakkun bayanai na wayoyi.

TSIRIN FARA

Bi tsarin farawa tsarin da aka tsara a cikin Ƙarfin Ƙarfin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa.

MALAMAI LED

Ƙarƙashin aiki marar amfani, LEDs na Yellow da Green za su kasance a kan ci gaba (m). Idan NIM bai yi nasarar sadarwa tare da Infinity Control ba, Green LED ba zai kasance a kunne ba. Idan akwai kurakurai a halin yanzu, alamar Yellow LED za ta kiftawa lambar matsayi mai lamba biyu. Lambobin farko za su yi kiftawa cikin sauri, na biyu kuma a hankali.

BAYANIN LAMBAR MATSAYI

  • 16 = Rashin Sadarwa
  • 45 = Kasawar Hukumar
  • 46 = Ƙarfin shigarwa Voltage

FUSE

A 3-amp Ana amfani da nau'in fuse na mota don kare NIM daga wuce gona da iri na kayan R na waje. Idan wannan fuse ya gaza, akwai yuwuwar akwai ɗan gajeren wayoyi zuwa na'urar da NIM ke sarrafawa. An gyara gajeriyar gajeriyar wayoyi, yakamata a maye gurbin fuse da 3 iri ɗaya amp mota fuse.

24 VAC POWER SOURCE

NIM tana karɓar ƙarfin 24 V AC daga naúrar cikin gida C da D tem1inals (ta hanyar bas ɗin haɗin ABCD). A mafi yawan aikace-aikace, akwai isassun wutar lantarki (Irin VA) da ake samu daga na'ura mai canzawa na cikin gida don ɗaukar na'urar iska ko haɗin haɗin naúrar waje. Ba a buƙatar ƙarin taswira.

Haƙƙin mallaka 2004 CARRIER Corp.• 7310 W. Morris St• Indianapolis, IN 46231

Mai sana'anta yana da haƙƙin dakatarwa, ko canzawa a kowane lokaci, ƙayyadaddun bayanai ko ƙira ba tare da sanarwa ba kuma ba tare da haifar da wajibai ba.

Catalog No. 809-50015
An buga a Amurka
Form NIM01-1SI

Takardu / Albarkatu

Module Interface Interface Mai ɗauka SYSTXCCNIM01 Infinity Network [pdf] Jagoran Jagora
SYSTXCCNIM01 Infinity Network Interface Module, SYSTXCCNIM01, Infinity Network Interface Module

Magana

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *