BAFANG DP C262.CAN Nuna

Abubuwan da ke ciki boye
1 MUHIMMAN SANARWA
2 GABATARWA NA NUNA
3 BAYANIN KYAUTATA
3.1 Ƙayyadaddun bayanai
3.2 Aiki Ya Ƙareview
4 BAYYANA BAYANI
5 BAYANIN MALAMAI
6 AIKIN AL'ADA
6.1 Canja tsarin ON/KASHE
6.2 Zaɓin Matakan Taimako
6.3 Zaɓin Yanayin
6.4 Fitilolin mota / hasken baya
6.5 Taimakon Tafiya
6.6 Alamar Ƙarfin Baturi
6.7 Sabis
7 STINGS
7.1 "Setting" dubawa
7.2 "Bayani" dubawa
8 BAYANIN KUSKUREN CODE
9 MAGANAR GARGAƊI
10 Takardu / Albarkatu
10.1 Magana
11 Labarai masu alaka

MUHIMMAN SANARWA

  • Idan bayanin kuskure daga nuni ba zai iya gyara ba bisa ga umarnin, tuntuɓi dillalin ku.
  • An tsara samfurin don zama mai hana ruwa. Ana ba da shawarar sosai don guje wa nutsar da nuni a ƙarƙashin ruwa.
  • Kada a tsaftace nuni tare da jet mai tururi, mai tsaftar matsa lamba ko bututun ruwa.
  • Da fatan za a yi amfani da wannan samfurin tare da kulawa.
  • Kada a yi amfani da masu sirara ko wasu kaushi don tsaftace nuni. Irin waɗannan abubuwa na iya lalata saman.
  • Ba a haɗa garanti ba saboda lalacewa da amfani na yau da kullun da tsufa.

GABATARWA NA NUNA

  • Model: DP C262.CAN BUS
  • Kayan gida shine ABS, an yi murfin da taga daga gilashin soda-lime, maɓallin shine kayan TPV, kamar haka:
  • Alamar alamar ita ce kamar haka:

Lura: Da fatan za a kiyaye alamar lambar QR a haɗe zuwa kebul na nuni. Ana amfani da bayanin daga Lakabin don yuwuwar sabunta software daga baya.

BAYANIN KYAUTATA

Ƙayyadaddun bayanai
  • Yanayin aiki: -20 ℃ ~ 45 ℃
  • Adana zafin jiki: -20 ℃ ~ 60 ℃
  • Mai hana ruwa: IP65
  • Yanayin zafi: 30% -70% RH
Aiki Ya Ƙareview
  • Alamar saurin sauri (gami da saurin ainihin lokacin, max. gudun da matsakaicin gudu)
  • Naúrar tana canzawa tsakanin km da mil.
  • Alamar ƙarfin baturi
  • Sarrafa da nuni ga fitilun mota
  • Alamar matakin taimako
  • Alamar tafiya (ciki har da TRIP, ODO da RANGE)
  • Alamar wutar lantarki (ciki har da ikon shigar da mota, ikon shigar da mutum)
  • Alamar lokaci don tafiya ɗaya
  • Misalin taimakon tafiya
  • Alamar saƙon kuskure
  • Nunawa don cin kuzarin CALORIES (NOTE: Idan mai sarrafawa yana da wannan aikin)
  • Nuni don ragowar nisa. (NOTE: yana buƙatar mai sarrafawa yana da wannan aikin)

BAYYANA BAYANI

  1. Alamar fitillu
  2. Nuna sauri a cikin ainihin lokaci
  3. Zaɓin yanayi:
    nisan tafiya ɗaya (TRIP), jimlar nisa
    ODO, matsakaicin gudu (MAX), matsakaicin gudu
    (AVG), sauran nisa (RANGE), makamashi
    amfani (CALORIES), lokaci (TIME). (Lura:
    Aiki iri ɗaya yana buƙatar goyon bayan Mai Gudanarwa).
  4. Matsayin tallafi da nunin taimakon tafiya
  5. Alamar ƙarfin baturi
  6. "Service" nuni.
  7. Alamar naúrar sauri
  8. Alamar shigar da wutar lantarki
  9. Alamar shigar da ikon ɗan adam

BAYANIN MALAMAI

AIKIN AL'ADA

Canja tsarin ON/KASHE

Latsa kuma ka riƙe (> 2S) don kunna nunin, HMI ta fara nuna boot ɗin LOGO. Latsa kuma riƙe (> 2S) zai iya sake kashe HMI.

Zaɓin Matakan Taimako

Lokacin da HMI ya kunna, danna kaɗan (<0.5s) ko don zaɓar matakin taimako (yawan matakin taimakon yana buƙatar daidaitawa zuwa mai sarrafawa), Matsayi mafi ƙasƙanci shine Mataki na 0, matakin mafi girma shine 5. A kan tsoho shine Level 1, "0" yana nufin babu taimakon wutar lantarki. The interface yana kamar haka:

Zaɓin Yanayin

A taƙaice danna maɓallin "Yanayin" (<0.5s) zuwa view daban-daban yanayin da bayanai.

  1. Tsarin tare da firikwensin juzu'i, madauwari yana nuna nisan tafiya guda ɗaya (Trip,km) → jimlar nisa (ODO, km) → matsakaicin saurin (MAX, km/h) → matsakaicin saurin (AVG, km/h) → ragowar nisa (RANGE,km) ) → cadence (CADENCE) → amfani da makamashi (CALORIES/CAL,KCal) → lokacin hawan (TIME,min) → zagayowar.
  2. Idan tsarin tare da firikwensin saurin gudu, yana nuna tazarar tafiya guda ɗaya (Trip,km) → jimlar nisa (ODO, km) → matsakaicin gudun (MAX,km/h) → matsakaicin gudu (AVG,km/h) → ragowar nisa (RANGE) ,km) → lokacin hawan (TIME,min) → zagayowar.
Fitilolin mota / hasken baya

Latsa ka riƙe (> 2S) don kunna fitilar baya da kuma fitilun mota.
Latsa ka riƙe (> 2S) sake kashe hasken baya da fitilun mota.

Taimakon Tafiya

Lokacin da Pedelec ɗinku ba ya motsi, danna kaɗan maɓalli har sai alamar taimakon Tafiya ana nunawa. A wannan lokacin, dogon latsawa maballin, Pedelec ya shiga yanayin taimakon tafiya, mai nuna alama zai yi haske. Idan saki maɓallin zai dakatar da wannan, idan babu wani aiki tsakanin 5s zai dawo kai tsaye zuwa matakin 0. Ana dakatar da wannan daga yanayin taimakon Tafiya.(kamar yadda yake)

Alamar Ƙarfin Baturi

Kashi na kashitage na ƙarfin baturi na yanzu da jimlar ƙarfin yana nunawa daga 100% zuwa 0% bisa ga ainihin ƙarfin (kamar yadda aka nuna a cikin adadi na ƙasa).

Sabis

HMI za ta yi tsokaci don kulawa bisa ga nisan mil da lokutan caja baturi. Lokacin da nisan mil ya wuce 5000km (sau 100 don caja) kuma aikin "Service" ya kunna, alamar "Sabis" za a nuna akan HMI. Ana iya saita wannan aikin a cikin dubawa. Domin aikin yana da cikakken bayani a cikin rubutu mai zuwa.

STINGS

Bayan HMI ya kunna, a taƙaice danna maɓallin "Yanayin" sau biyu don shigar da "Setting". A taƙaice danna ko (<0.5s) don zaɓar sannan a taƙaice danna (<0.5S) maɓallin “Yanayin” don tabbatarwa da shigar da zaɓin.
Lura: gudun dole ne ya zama "0" sannan zai iya shigar da saiti.

Kuna iya da sauri danna maɓallin "Yanayin" (<0.5S) sau biyu a kowane lokaci, ko zaɓi "Back" ko "Fita" don komawa zuwa babban dubawa.

"Setting" dubawa

A cikin “Setting” dubawa, a taƙaice danna (<0.5S) ko zuwa zaɓi "Setting" sa'an nan a taƙaice danna (<0.5S) "Yanayin" don tabbatarwa kuma shigar da "Setting".

“Sake saitin Tafiya”—saitin aikin sake saiti don tafiya ɗaya

A taƙaice danna or don zaɓar "Sake saitin Tafiya", sannan a taƙaice danna "Yanayin" don shigar da abun. Zaɓi "NO"/"YES" ("YES"- don share, "NO"-babu aiki), sannan a taƙaice danna "Yanayin" don ajiyewa kuma fita zuwa "Setting" interface.
NOTE: ana sake saita lokacin hawan keke, matsakaicin gudu da matsakaicin gudu a lokaci guda.

"Naúrar" - saita naúrar km/mile

A taƙaice danna or don zaɓar "Unit", sannan a taƙaice danna "Yanayin" don shigar da abun. Zaɓi "Metric"/ "Imperial", sannan a taƙaice danna "Yanayin" don ajiyewa da fita zuwa "Setting" interface.

"Haske" - saita hasken baya

A taƙaice danna or don zaɓar "Haske", sannan a taƙaice danna "Yanayin" don shigar da abun. Zaɓi kashi ɗayatage kamar yadda "100%"/ "75%"/"50%"/"30%"/"10%", sannan a taƙaice danna "Yanayin" don ajiyewa da fita zuwa "Setting" interface.
Lura: "10%" shine mafi ƙarancin haske kuma 100% shine mafi girman haske.

"Kashe atomatik" - saita lokacin kashewa ta atomatik

A taƙaice danna or don zaɓar "Auto Off", sannan a taƙaice danna "Yanayin" don shigar da abun. Zaɓi lokacin kashewa ta atomatik azaman "KASHE"/"9"/"8"/"7"/"6"/"5"/"4"/"3"/"2"/"1", a taƙaice danna "Yanayin". ” don ajiye saitin kuma fita zuwa “Setting” interface.
Sanarwa: "KASHE" yana nufin wannan aikin a kashe, naúrar minti ce.

"Yanayin Taimako" - saita matakin taimako

A taƙaice danna or don zaɓar “Yanayin Taimakawa”, sannan a taƙaice danna “Yanayin” don shigar da abun. Zaɓi matakin taimako kamar "3"/"5"/"9", sannan a taƙaice danna "Yanayin" don ajiyewa da fita zuwa "Setting" interface.

"Sabis" - kunna/kashe nunin Sabis

A taƙaice danna or don zaɓar "Service", sannan a taƙaice danna "Yanayin" don shigar da abun. Zaɓi "NO"/"YES" ("YES" yana nufin alamar sabis yana kunne; "NO" yana nufin alamar sabis ɗin a kashe), sannan danna "Yanayin" a taƙaice don ajiyewa da fita zuwa "Setting" interface.

"Bayani" dubawa

A cikin Saitin dubawa, a taƙaice danna (<0.5S) or don zaɓar “Bayani” sannan a ɗan latsa (<0.5S) “Yanayin” don tabbatarwa da shigar da “Bayanai”.

View "Girman Taya"

A taƙaice danna or don zaɓar ” Girman Dabarun ”, sannan a taƙaice danna “Yanayin” zuwa view Tsohuwar girman dabaran, sannan a taƙaice danna "Yanayin" don fita baya zuwa "Bayani" dubawa.

View "Iyayin Gudu"

A taƙaice danna or don zaɓar "Iyayin Gudun Gudun", sannan a taƙaice danna "Yanayin" zuwa view tsoho iyaka gudun, sa'an nan a taƙaice danna "Yanayin" don fita baya zuwa "Bayani" dubawa.

View "Bayanin baturi."

A taƙaice danna or don zuwa "Battery Info.", sannan a taƙaice danna "Yanayin" don shigarwa, sannan danna "+" ko "-" don zuwa. view bayanan baturi (b01 → b04 → b06 → b07 → b08 → b09 → b10 → b11 → b12 → b13 → d00 → d01 → d02 → … → dn → Hardware Ver → Software Ver), a takaice danna “Mode” don fita baya baya. zuwa "Information" dubawa.
Sanarwa: Idan baturin ba shi da aikin sadarwa, ba za ka ga kowane bayanai daga baturi ba.

Lambar Ma'anar Code Naúrar
b01 Yanayin zafi na yanzu ℃
b04 Jimlar voltage mV
b06 Matsakaicin halin yanzu mA
b07 Ragowar iya aiki mAh
b08 Cikakken cajin ƙarfin baturi mAh
b09 Cajin dangi a kashi ɗayatage %
b10 Cikakken Cajin cikin kashi ɗayatage %
b11 Lokacin Zagayowar sau
b12 Max lokacin rashin caji Sa'a
b13 Lokacin Ƙarshe na Ƙarshe Sa'a
d00 Yawan tantanin halitta  
d01 Voltage Cell 1 mV
d02 Voltage Cell 2 mV
dn Voltage Cell n mV
e01 Hardware Version  
e02 Sigar Software  

NOTE: Idan ba a gano bayanai ba, yana nuna "-".

View "Bayani Nuni"

A taƙaice danna or don zaɓar “Bayani Nuni”, sannan a taƙaice danna “Yanayin” zuwa view shi, a taƙaice danna or ku view "Hardware Ver" ko "Software Ver", sannan a taƙaice danna "Yanayin" don komawa zuwa "Bayani".

View "Ctrl Bayani"

A taƙaice danna or don zaɓar "Ctrl Info", sannan a taƙaice danna "Yanayin" zuwa view shi, a taƙaice danna or ku view "Hardware Ver" ko "Software Ver", sannan a taƙaice danna "Yanayin" don komawa zuwa "Bayani".

View "Bayani na Torque"

A taƙaice danna or don zaɓar "Bayanin Ƙirar Wuta", sannan a taƙaice danna "Yanayin" zuwa view shi, a taƙaice danna or ku view "Hardware Ver" ko "Software Ver", sannan a taƙaice danna "Yanayin" don komawa zuwa "Bayani".
NOTE: Idan Pedelec ɗinku ba shi da firikwensin juzu'i, to ba za a iya nuna "Bayanin Ƙirar Wuta" ba.

View "Lambar Kuskure"

A taƙaice danna or don zaɓar "Error Code", sannan a taƙaice danna "Yanayin" zuwa view shi, a taƙaice danna or ku view saƙon kuskure na sau goma na ƙarshe ta "E-Code0" zuwa "E-Code9", sannan danna "Yanayin" a taƙaice don fita zuwa "Bayanai".
NOTE: 00 yana nufin babu kuskure.

View "Lambar Gargaɗi"

A taƙaice danna or don zaɓar "Warn Code", sannan a taƙaice danna "Yanayin" zuwa view shi, a taƙaice danna or ku view saƙon faɗakarwa na sau goma na ƙarshe ta “W-Code0” zuwa “W-Code9”, sannan a taƙaice danna “Yanayin” don komawa baya zuwa “Bayani”.

BAYANIN KUSKUREN CODE

HMI na iya nuna kurakuran Pedelec. Lokacin da aka gano kuskure, ɗaya daga cikin lambobin kuskure masu zuwa za'a nuna akan matsayin nunin gudun.

Lura: Da fatan za a karanta a hankali bayanin lambar kuskure. Lokacin da lambar kuskure ta bayyana, da fatan za a fara sake kunna tsarin. Idan ba a kawar da matsalar ba, tuntuɓi dillalin ku ko ma'aikatan fasaha.

Kuskure Sanarwa Shirya matsala
04 Makullin yana da laifi.
  1. Duba mai haɗawa da kebul na maƙura ba su lalace ba kuma an haɗa su daidai.
  2. Cire haɗin kuma sake haɗa ma'aunin, idan har yanzu babu aiki da fatan za a canza ma'aunin.
05 Makullin baya komawa daidai matsayinsa. Bincika mai haɗawa daga maƙullan an haɗa daidai. Idan wannan bai magance matsalar ba, da fatan za a canza magudanar.
07 Ƙarfafawatage kariya
  1. Cire kuma sake saka baturin don ganin ko ya warware matsalar.
  2. Amfani da kayan aikin BESST sabunta mai sarrafawa.
  3. Canja baturin don warware matsalar.
08 Kuskure tare da siginar firikwensin zauren cikin motar
  1. Duba duk masu haɗawa daga motar an haɗa su daidai.
  2. Idan har yanzu matsalar tana faruwa, da fatan za a canza motar.
09 Kuskure tare da tsarin Injin Da fatan za a canza motar.
10 Zazzabi a cikin injin ya kai matsakaicin ƙimar kariya
  1. Kashe tsarin kuma ba da damar Pedelec ya huce.
  2. Idan har yanzu matsalar tana faruwa, da fatan za a canza motar.
11 Ma'aunin zafin jiki a cikin motar yana da kuskure Da fatan za a canza motar.
12 Kuskure tare da firikwensin halin yanzu a cikin mai sarrafawa Da fatan za a canza mai sarrafawa ko tuntuɓi mai samar da ku.
13 Kuskure tare da firikwensin zafin jiki a cikin baturin
  1. Duba duk masu haɗin baturin an haɗa su daidai da motar.
  2. Idan har yanzu matsalar tana faruwa, da fatan za a canza baturin.
14 Yanayin kariyar da ke cikin mai sarrafawa ya kai matsakaicin ƙimar kariya
  1. Bada pedelec ya huce kuma ya sake kunna tsarin.
  2. Idan har yanzu matsalar tana faruwa, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
15 Kuskure tare da firikwensin zafin jiki a cikin mai sarrafawa
  1. Bada pedelec ya huce kuma ya sake kunna tsarin.
  2. Idan har yanzu matsalar tana faruwa, Da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
21 Kuskuren firikwensin sauri
  1. Sake kunna tsarin
  2. Bincika cewa maganadisu da ke haɗe da magana yana daidaita da firikwensin gudun kuma tazarar tana tsakanin mm 10 zuwa 20 mm.
  3. Bincika cewa an haɗa haɗin firikwensin saurin daidai.
  4. Haɗa pedelec zuwa BESST, don ganin ko akwai sigina daga firikwensin gudun.
  5. Amfani da BESST Tool- sabunta mai sarrafawa don ganin ko ya warware matsalar.
  6. Canja firikwensin saurin don ganin ko wannan yana kawar da matsalar. Idan har yanzu matsalar tana faruwa, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
25 Kuskuren siginar karfin wuta
  1. Bincika cewa an haɗa duk haɗin kai daidai.
  2. Da fatan za a haɗa pedelec zuwa tsarin BESST don ganin ko kayan aikin BESST na iya karanta karfin juyi.
  3. Yin amfani da BESST Tool sabunta mai sarrafawa don ganin idan ya warware matsalar, idan ba haka ba, don Allah canza firikwensin karfin wuta ko tuntuɓi mai kaya.
26 Siginar saurin firikwensin karfin juyi yana da kuskure
  1. Bincika cewa an haɗa duk haɗin kai daidai.
  2. Da fatan za a haɗa pedelec zuwa tsarin BESST don ganin ko kayan aikin BESST na iya karanta siginar sauri.
  3. Canja Nuni don ganin ko an warware matsalar.
  4. Yin amfani da BESST Tool sabunta mai sarrafawa don ganin idan ya warware matsalar, idan ba haka ba, don Allah canza firikwensin karfin wuta ko tuntuɓi mai kaya.
27 Juyawa daga mai sarrafawa Amfani da kayan aikin BESST sabunta mai sarrafawa. Idan har yanzu matsalar tana faruwa, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
30 Matsalar sadarwa
  1. Duba duk haɗin da ke kan pedelec an haɗa su daidai.
  2. Amfani da BESST Tool yana gudanar da gwajin gwaji, don ganin ko zai iya nuna matsalar.
  3. Canja nuni don ganin ko an warware matsalar.
  4. Canza kebul na EB-BUS don ganin ko ta warware matsalar.
  5. Yin amfani da kayan aikin BESST, sake sabunta software mai sarrafawa. Idan har yanzu matsalar tana faruwa don Allah canza mai sarrafawa ko tuntuɓi mai kawo kaya.
33 Siginar birki yana da kuskure (Idan na'urori masu auna birki sun dace)
  1. Bincika duk masu haɗin haɗin suna da alaƙa daidai akan birki.
  2. Canja birki don ganin ko an warware matsalar.

Idan matsala ta ci gaba Da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
35 Da'irar ganowa don 15V yana da kuskure Yin amfani da kayan aikin BESST sabunta mai sarrafawa don ganin ko wannan ya warware matsalar. Idan ba haka ba, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
36 Da'irar ganowa akan faifan maɓalli yana da kuskure Yin amfani da kayan aikin BESST sabunta mai sarrafawa don ganin ko wannan ya warware matsalar. Idan ba haka ba, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
37 Wurin WDT yayi kuskure Yin amfani da kayan aikin BESST sabunta mai sarrafawa don ganin ko wannan ya warware matsalar. Idan ba haka ba, da fatan za a canza mai sarrafawa ko tuntuɓi mai kawo kaya.
41 Jimlar voltage daga baturin yayi tsayi da yawa Da fatan za a canza baturin.
42 Jimlar voltage daga baturin yayi ƙasa da ƙasa Da fatan za a yi cajin baturi. Idan har yanzu matsalar tana faruwa, da fatan za a canza baturin.
43 Jimlar ƙarfi daga sel baturin ya yi girma da yawa Da fatan za a canza baturin.
44 Voltage na tantanin halitta ɗaya ya yi yawa Da fatan za a canza baturin.
45 Zazzabi daga baturin ya yi yawa Da fatan za a bar mashin ɗin ya huce.
Idan har yanzu matsala ta faru, da fatan za a canza baturin.
46 Yanayin zafin baturin yayi ƙasa sosai Da fatan za a kawo baturin zuwa yanayin zafi. Idan har yanzu matsalar tana faruwa, da fatan za a canza baturin.
47 SOC na baturin yayi girma da yawa Da fatan za a canza baturin.
48 SOC na baturin ya yi ƙasa sosai Da fatan za a canza baturin.
61 Canjin gano lahani
  1. Duba mai sauya kaya bai cunkushe ba.
  2. Da fatan za a canza mai sauya kaya.
62 Derailleur na lantarki ba zai iya saki ba. Da fatan za a canza magudanar ruwa.
71 Kulle na lantarki ya matse
  1. Yin amfani da kayan aikin BESST yana sabunta Nuni don ganin idan ya warware matsalar.
  2. Canja nuni idan har yanzu matsalar tana faruwa, da fatan za a canza makullin lantarki.
81 Tsarin Bluetooth yana da kuskure Yin amfani da kayan aikin BESST, sake sabunta software ɗin akan nuni don ganin ko ta warware matsalar.
Idan ba haka ba, Da fatan za a canza nuni.

MAGANAR GARGAƊI

Gargadi Sanarwa Shirya matsala
28 Farkon firikwensin Torque ba al'ada ba ne. Sake kunna tsarin kuma lura kar a taka crank da wuya lokacin sake farawa.

Takardu / Albarkatu

BAFANG DP C262.CAN Nuna [pdf] Manual mai amfani
DP C262.CAN Nuni, C262.CAN Nuni, Nuni

Magana

Labarai masu alaka

Bar sharhi

Ba za a buga adireshin imel ɗin ku ba. Ana yiwa filayen da ake buƙata alama *