AXXESS AXTC-LN31 GM Data Interface tare da SWC 2019-Up
APPLICATIONS
SIFFOFIN INTERFACE
- Yana ba da ikon na'ura mai riƙewa (10-amp)
- Yana bayar da haske, birki na ajiye motoci, baya, da kuma saurin azanci
- Yana riƙe sautin faɗakarwa ta hanyar lasifikar kan allo
- Yana riƙe kyamarar madadin masana'anta
- Yana riƙe da sarrafa sauti akan sitiyarin
- An ƙera shi don dacewa da duk manyan samfuran rediyo
- Yana gano nau'in abin hawa ta atomatik, haɗin rediyo, da saitattun sarrafawa
- Ikon sanya maɓallan sarrafa sitiyari biyu
- Yana riƙe saitunan ƙwaƙwalwar ajiya ko da bayan cire haɗin baturi ko cire haɗin keɓancewa (ƙwaƙwalwar ajiya mara ƙarfi)
- Tsara don wadanda baampsamfura masu inganci, ko lokacin ƙetare masana'anta amplififi
- Yana riƙe ma'auni kuma ya ɓace
- Micro-B USB ana sabunta shi
† Ana iya samun lambar rediyo a cikin Label ɗin Gane Sashen Sabis da ke:
Akwatin safar hannu – Equinox/Terain
QR kawai (duba bayanin kula) - Camaro/Canyon/Colorado/Malibu/Sierra/Silverado
LuraMotocin GM na zamani suna canzawa zuwa lakabin salon QR. Idan Label ɗin Sabis na Mataimakin Mataimakin ba a wurin da aka jera shi, duba Label ɗin Takaddun Takaddun Mota a ciki na buɗe ƙofar direba don lambar QR.
INTERFACE BANGASKIYA
- Saukewa: AXTC-LN31
- Saukewa: AXTC-LN31
- 3.5mm adaftar
ABUBUWAN DA AKE BUKATAR ABUBUWAN DA AKA KIRA
- • Kayan aiki na crimping da masu haɗawa, ko bindiga mai siyar, solder, da raguwar zafi • Tef • Mai yankan waya
• Zauren zip
Bayanin samfur
HANYOYI
SHIRI
- Bude ƙofar direba, kuma ci gaba da buɗewa yayin aiwatar da shirye-shirye.
- Zagayowar kunnawa.
- Haɗa da Saukewa: AXTC-LN31 kayan aiki ga Saukewa: AXTC-LN31 dubawa, sa'an nan kuma zuwa ga kayan aikin waya a cikin abin hawa.
- Gano wurin Ƙara girma maballin akan sitiyarin. Shirya abin dubawa ta danna maɓallin Ƙara girma button har LED ya daina walƙiya.
- LED ɗin zai haska Green & Ja yayin da keɓancewar ke shirin rediyo zuwa abubuwan sarrafa sitiyari. Da zarar an shirya, LED ɗin zai fita, sannan ya samar da tsarin da zai gano nau'in rediyon da aka sanya. Koma zuwa sashin amsawar LED LED a ƙarƙashin Shirya matsala don nau'ikan rediyo.
- LED ɗin zai fita, sannan kuma da sauri ya yi walƙiya Green & Red yayin da keɓancewar ke shirin kanta zuwa abin hawa. Da zarar an tsara shi, LED ɗin zai sake fita, sannan ya juya m Green.
- A kashe wutar lantarki, sannan a kunna.
- Gwada duk ayyukan shigarwa don aiki mai kyau.
CUTAR MATSALAR
Idan mai dubawa ya kasa aiki, danna kuma saki maɓallin sake saiti, sannan maimaita tsarin shirye-shirye daga mataki na 4 don sake gwadawa.
Ana iya samun ƙarin matakan magance matsala da bayanai a:
axxessinterfaces.com/product/AXTC-LN31
Bayanin LED na ƙarshe
A karshen shirye-shirye LED zai juya Solid Green wanda ke nuna cewa shirye-shiryen ya yi nasara. Idan LED ɗin bai juya Solid Green ba, duba jerin da ke ƙasa don fahimtar ɓangaren shirye-shirye da matsalar zata iya tasowa.
Lura: Idan LED ya nuna Solid Green don Wuce (yana nuna duk abin da aka tsara daidai), duk da haka sarrafa sitiyarin baya aiki, tabbatar da cewa an toshe jack ɗin 3.5mm, kuma an saka shi cikin madaidaicin jack a cikin rediyo. Da zarar an gyara, danna maɓallin sake saiti, sannan kuma shirin sake.
Samun matsaloli? Mun zo nan don taimakawa.
Tuntuɓi layin Tallafin Fasaha a:
386-257-1187
Ko ta hanyar imel a:
techsupport@metra-autosound.com
Sa'o'in Tallafi na Fasaha (Lokacin Daidaita Gabas)
Litinin - Juma'a: 9:00 na safe - 7:00 na yamma
Asabar: 10:00 na safe - 7:00 na yamma
Lahadi: 10:00 na safe - 4:00 na yamma
Takardu / Albarkatu
 |
AXXESS AXTC-LN31 GM Data Interface tare da SWC 2019-Up [pdf] Jagoran Jagora AXTC-LN31, GM Data Interface tare da SWC 2019-Up, AXTC-LN31 GM Data Interface tare da SWC 2019-Up |
