SHIRI
UNIVERSAL
TPMS SENSOR

Samfura: 1 Sensor (Screw In)

HANKALI:
• Autel MX-Sensors sun isa babu komai kuma dole ne a tsara su tare da kayan aikin Autel TPMS, wanda aka ba da shawarar ga shirin kafin shigarwa.
Ba a tsara wannan firikwensin don amfani da ababen hawa a gasar tsere ba. Tabbatar cewa abin hawa tare da na'urar firikwensin da aka shigar yana kiyaye saurin ƙasa da 300km/h (186mph).

JAGORAN SHIGA

MUHIMMI: Kafin aiki ko kiyaye wannan rukunin, da fatan za a karanta waɗannan umarnin a hankali kuma a kula da gargaɗin Biosafety da taka tsantsan. Yi amfani da wannan naúrar daidai kuma tare da kulawa. Rashin yin haka na iya haifar da lalacewa da/ko rauni na mutum kuma zai ɓata garanti. 1
Sake taya
Cire hular bawul da cibiya kuma ka kashe taya. Yi amfani da sako-sako don kwance katakon taya.
HANKALI: Dole ne mai kwance dutsen ya kasance yana fuskantar bawul.

UMARNIN TSIRA

Kafin shigar da firikwensin, karanta shigarwa da umarnin aminci a hankali. Don dalilai na aminci da mafi kyawun aiki, muna ba da shawarar cewa duk wani aikin gyarawa da ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ne kawai za su yi su, daidai da ƙa'idodin masu kera abin hawa. Bawul ɗin sassa ne masu dacewa da aminci waɗanda aka yi niyya don shigarwa na ƙwararru kawai. Rashin yin hakan na iya haifar da gazawar firikwensin PMS. AUTEL baya ɗaukar kowane alhaki idan akwai kuskure ko kuskuren shigar da samfur.

HANKALI

• Majalisun firikwensin TPMS su ne maye ko gyara sassa don motocin da aka shigar da TPMS na masana'anta.
• Tabbatar da tsara na'urori masu auna firikwensin ta kayan aikin shirye-shiryen firikwensin AUTEL ta takamaiman abin hawa, samfuri da shekara kafin shigarwa.
• Kar a shigar da na'urori masu auna firikwensin TPMS a cikin ƙafafun da suka lalace.
• Domin tabbatar da kyakkyawan aiki, ana iya shigar da na'urori masu auna firikwensin kawai tare da bawuloli da na'urorin haɗi na AUTEL.
• Bayan kammala shigarwa, gwada TPMS na abin hawa bin hanyoyin da aka bayyana a cikin jagorar mai amfani na asali don tabbatar da shigarwa mai kyau.

Sauke taya 
Clamp Tayar kan mai canza taya, sannan a daidaita bawul da karfe 1 na rana dangane da kan rabuwar taya. Saka kayan aikin taya kuma ɗaga katakon taya akan kan mai hawa don sauke dutsen.   HANKALI:
Dole ne a lura da wannan matsayi na farawa yayin aiwatar da saukarwa.

Rage firikwensin Cire nut nut daga tushen bawul, sannan cire taron firikwensin daga bakin.

GARANTI

AUTEL yana ba da tabbacin cewa firikwensin ya kuɓuta daga lahani na kayan aiki na tsawon watanni ashirin da huɗu (24) ko mil 25,000, duk wanda ya zo na farko. AUTEL za ta maye gurbin kowane kaya a lokacin garanti. Garantin zai zama ba komai idan ɗayan waɗannan abubuwan sun faru:

1.  Rashin shigar da samfurori
2. Amfani mara kyau
3. Shigar da lahani ta wasu samfuran
4. Rashin sarrafa kayayyaki
5. Aikace-aikacen da ba daidai ba
6. Lalacewa sakamakon karo ko gazawar taya
7. Lalacewa saboda tsere ko gasa
8. Wucewa takamaiman iyakokin samfurin

TAIMAKON CUSTOMER & TECH
855-288-3587 (Amurka)
0049 (0) 61032000522 (EU)
0086-755-86147779 (CN)
sales@autel.com supporttpms@auteltech.com
www.autel.com www.maxitpms.com

3 Sauke firikwensin Latsa maɓallin latsawa a jikin firikwensin, a hankali ja jikin firikwensin baya tsaye daga bawul ɗin. Yanke kwan fitilar roba kuma haɗa a
daidaitaccen mai cire bawul ɗin taya zuwa bawul. Cire bawul ɗin daga bakin ta hanyar ja ta bakin.

4 Firikwensin hawa da bawul
Mataki 1. Haɗa jikin firikwensin da bututun bawul a kusurwar da ta dace (Yawanci yi amfani da matsakaicin kusurwa na 30 °) kuma ƙara dunƙule. Aiwatar da sabulun taya ko maganin lube zuwa tudun bawul ɗin roba.
Mataki 2. Yi layi na firikwensin sama tare da ramin ramin kuma haɗa daidaitaccen mai cire bawul ɗin taya zuwa ƙarshen bawul.
Mataki na 3. Cire bawul ɗin bawul kai tsaye ta cikin ramin bawul, sa'an nan kuma haɗa hular baya. Lura da kwan fitilar roba na bawul ɗin yana hutawa a gefen gefen.

Firikwensin hawa da bawul
Mataki na 1. Haɗa jikin firikwensin da bututun bawul a kusurwar da ta dace (Yawanci amfani da matsakaicin kusurwar 30°) kuma ƙara dunƙule.
Mataki na 2. Cire dunƙule goro daga bawul tushe.
Mataki na 3. Zamar da tushen bawul ta cikin ramin bawul na bakin tare da firikwensin a cikin bakin.
Mataki na 4. Haɗa dunƙule goro a baya akan bututun bawul tare da ƙarfin Nm 4.0, sannan ƙara murfi.

Tsanaki: 30° ya dace da yawancin rims. Idan kusurwar bai dace da bakin ba yayin shigarwa a mataki na 3, da fatan za a sassauta screw sannan sake yin aiki daga mataki.

FASHI VIEW NA SENSOR

Bayanan fasaha na firikwensin

Nauyin firikwensin ba tare da bawul ba	11g ku
Girma	kusan 42.4*24.1*16.0mm
Max. iyakar matsa lamba	800 a ba

HANKALI: Duk lokacin da aka yi aikin taya ko saukarwa, ko kuma idan an cire firikwensin ko aka maye gurbinsa, ya zama tilas a maye gurbin roba grommet, nut nut, da bawul core tare da sassan mu don tabbatar da hatimi mai kyau.
Wajibi ne a maye gurbin firikwensin idan ya lalace a waje. Madaidaicin firikwensin goro: 4.0 Nm.

Hawan taya 5 Sanya taya a gefen, tabbatar da cewa bawul ɗin yana fuskantar kan rabuwa a kusurwar 180. Sanya taya a kan gefen.

HANKALI: Ya kamata a ɗora taya akan dabaran ta amfani da umarnin masu canza taya.

Bayanin FCC

Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aiki yana ƙarƙashin waɗannan sharuɗɗa guda biyu masu zuwa: (1) wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so. Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta ɗaya ko fiye daga cikin
matakai masu zuwa:

• Sake daidaitawa ko matsar da eriya mai karɓa.
•  Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
  Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako tare da sanarwa mai mahimmanci
  Muhimmiyar Bayani:

Web: www.autel.com
www.maximum.com

Takardu / Albarkatu

AUTEL T1SENSOR-M Mai Shirye-shirye na Universal TPMS Sensor [pdf] Jagoran Shigarwa N8PS2012D, WQ8N8PS2012D, T1SENSOR-M Mai Shirye-shiryen Universal TPMS Sensor, Mai Shirye-shiryen Sensor na TPMS na Duniya

Magana

• Manual mai amfani