DTAPE Laser Measure User Manual

Gabatarwa

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

Me Ya Hada

• ACPOTEL 165 Ft Laser Measuring Device
• 1.5V AAA Batteries
• Jakar mai ɗaukar nauyi
• Jagorar mai amfani (wannan takaddar)
• Madadin Hannu
• Akwatin Kunshin

Saita

Shigar da baturi

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

Figure 1: DTAPE Laser Measure and included accessories.

Kunna/Kashe Wuta

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

Umarnin Aiki

Basic Distance Measurement

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

Figure 2: The ultra-HD LCD display showing measurement results.

Juya Juya

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

Wurin Magana Aunawa

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

Figure 4: Switching between front and back measurement reference points.

Hanyoyin Ma'auni da yawa

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

• Nisa: Single point-to-point measurement.
• Yanki: Calculates the area of a surface (length x width).
• Girma: Calculates the volume of a space (length x width x height).
• Pythagoras: Indirect measurement using the Pythagorean theorem (single or double).
• Ci gaba da Aunawa: Real-time tracking of distance as the device is moved.
• Ƙari/Ragewa: Add or subtract measurements.
• Adana Bayanai: Stores historical measurement data.

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

Kulawa

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

• Tsaftace na'urar ta hanyar shafa shi da taushi, bushe bushe.
• Ka guji fallasa na'urar zuwa matsanancin zafi ko hasken rana kai tsaye na tsawon lokaci.
• Store the device in its portable bag when not in use to protect it from dust and impacts.
• Cire batura idan ba za a yi amfani da na'urar ba na tsawon lokaci don hana yaɗuwa.

Shirya matsala

If you encounter issues with your DTAPE Laser Measure, consider the following:

• Na'urar baya kunnawa: Bincika shigarwar baturi kuma tabbatar da cewa batura ba su ƙare ba. Sauya idan ya cancanta.
• Karatun da ba daidai ba: Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
• Laser ba a gani: In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.

For persistent issues, refer to the detailed user manual included in the package or contact customer support.

Ƙayyadaddun bayanai

Garanti da Taimako

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL website.