Sigar AQUALABO Monobloc Pheht Sensor Lamba
FAQs
- Tambaya: Sau nawa zan iya daidaita firikwensin PHEHT?
- A: Ana ba da shawarar daidaita firikwensin aƙalla sau ɗaya kowane [ƙayyadaddun tsarin lokaci] ko kamar yadda tsarin amfani ya nuna.
- Tambaya: Menene mahimmancin alamar CE akan firikwensin?
- A: Alamar CE tana nuna cewa samfurin ya dace da lafiyar Turai, aminci, da ka'idodin kariyar muhalli.
Gabaɗaya
Domin kiyayewa da tabbatar da kyakkyawan tsarin aiki na firikwensin PHEHT, masu amfani dole ne su bi kariyar tsaro da gargaɗin da aka nuna a cikin wannan jagorar.
Haɗawa da kunnawa:
- Taruwa, haɗin wutar lantarki, kunnawa, aiki, da kiyaye tsarin aunawa dole ne kawai a gudanar da su ta hanyar ƙwararrun ma'aikata waɗanda masu amfani da wuraren ke ba da izini kawai.
- Dole ne ma'aikatan da aka horar su saba da kuma bi umarnin da ke cikin wannan littafin.
- Tabbatar cewa wutar lantarki ta bi ƙayyadaddun bayanai kafin haɗa na'urar.
- Dole ne a shigar da maɓalli mai alamar wuta kusa da na'urar.
- Bincika duk haɗin gwiwa kafin kunna wuta.
- Kada kayi ƙoƙarin amfani da kayan aikin da suka lalace: yana iya wakiltar haɗari kuma yakamata a yi masa lakabi da kuskure.
- Dole ne kawai masana'anta su yi gyare-gyare ko kuma ta AQUALABO sashen sabis na tallace-tallace.
Alama a jikin firikwensin:
Alamar a jikin firikwensin yana nuna lambar serial na firikwensin (don ganowa) da LOGO CE.
| 1 | Datamatrix (ya ƙunshi lambar serial) |
| 2 | Serial lamba PHEHT firikwensin: SN-PPHOX-YYYY X : sigar YYYY: lamba |
| 3 | Alamar CE |
Halaye
Halayen fasaha.: Za a iya gyara halayen fasaha ba tare da sanarwa na gaba ba.
| pH | |
| Ƙa'idar auna | Haɗaɗɗen lantarki (pH/ref): gilashin musamman, Ag/AgCI ref. Gelled electrolyte (KCI) |
| Rage | 0-14 pH |
| Ƙaddamarwa / Daidaitacce | 0,01 pH; ± 0,1 pH |
| Rashin layi | R2> 0.99 (2 |
| Lokacin amsawa | T90 <20s (bambancin pH4/pH9) |
| Redox | |
| Ƙa'idar auna | Haɗaɗɗen lantarki (Redox/Reference): Platinum tip, Ag/AgCI AgAgCl. Maganar Gelled (KCI) |
| Rage | - 1000 zuwa + 1000 mV |
| Ƙaddamarwa / Daidaitawa | 0,1 mV; ± 2 mV |
| Lokacin amsawa | T90< 5s |
| Zazzabi | |
| Fasaha | NTC |
| Rage | 0,00 °C zuwa + 50,00 ° C |
| Ƙaddamarwa / Daidaitawa | 0,01 °C; ± 0,5 °C |
| Rashin layi | R2>0.99 |
| Lokacin amsawa | T90< 50 s |
| Sensor | |
| Yanayin ajiya | 0°C zuwa +60°C |
| Kariya | IP68 |
| Interface | Modbus RS-4851 a matsayin misali ko SDI-122,3
1,2. firikwensin yana amsawa a yanayin Modbus/SDI12 gami da lokacin jiran aiki 3. Amfani da haɗa bas ɗin SDI12 na iya ƙara yawan jiran aiki har zuwa 100 µA dangane da matakin layin (sama ko ƙasa). Ba a ƙara yawan amfani ba idan layin SDI12 ya katse ko aka fito dashi a 0V (Modbus RTU kawai) |
| Ma'aunin Wartsakewa | Matsakaicin <1 seconds |
| Alamar dubawa | Modbus 1 RS-485 ko SDI-12 2,3
1,2 firikwensin yana amsawa a Modbus / SDI12 gami da lokacin jiran aiki 3 Amfani da haɗin bas ɗin SDI12 na iya ƙara ƙarfin jiran aiki amfani * har zuwa 100uA dangane da matakin layin (babba ko ƙasa). Ba a ƙara yawan amfani ba idan an katse layin SDI12 ko aka sake shi zuwa 0V (Modbus RTU kawai) |
| Samar da wutar lantarki na Sensor (RS485 da SDI12) | 5V 1,2 zuwa 12 3,4V DC (lokacin dumi 100 ms)
1 Mafi ƙarancin 4.5V tare da 1m na USB, boot, da daidaito ba a da garantin ƙarƙashin 5V 2 Mafi ƙarancin voltage ya fuskanci asarar da ke da alaƙa da tsawon na USB 3 13V Cikakken iyaka tare da ci gaba da cin abinci fiye da 2mA 4 Karamin wuce gona da iri tsakanin 12V da 12.5V |
| Yawan Amfani a 5V (RS485) Ana iya amfani da shi lokacin amfani da "yanayin ƙarancin wuta"
An ba da shawarar don ƙarancin wutar lantarki (ma'aunin 1 yana amfani da ƙasa da 10 µWh) Dangane da gyare-gyare idan akwai juyin halitta sassa na ciki |
jiran aiki ta atomatik ƙasa da 10 μA* (50 μW)
Matsakaicin kololuwar halin yanzu: 500 mA (1 ms) / 41 mA (6.5 ms) Matsakaicin halin yanzu yayin aunawa: 25 mA (125mW kuMatsakaicin halin yanzu yayin aunawa: 17 mA (85mW kuMatsakaicin RS485 na yanzu (1 meas. / seconde): 4.8 mA (mA)24mW kuMatsakaicin RS485 na yanzu (1 meas. / 10 seconds): 0.5 mA (2.5mW ku) Yanayin wutar lantarki mai ci gaba RS485 na yanzu: 17 mA ci gaba (85mW ku) |
| Yawan Amfani a 12V (RS485) Ana iya amfani da shi lokacin amfani da "yanayin ƙarancin wuta"
Karka taɓa wuce 12.0V don ƙaramin ƙarfi (ma'aunin 1 yana amfani da ƙasa da 25 µWh) Dangane da gyare-gyare idan akwai juyin halitta sassa na ciki |
jiran aiki ta atomatik ƙasa da 12 μA* (144 μW)
Matsakaicin kololuwar halin yanzu: 500 mA (1 ms) / 60 mA (6.5 ms) Matsakaicin halin yanzu yayin aunawa: 25 mA (300) mWMatsakaicin halin yanzu yayin aunawa: 17 mA (204 mWMatsakaicin RS485 na yanzu (1 meas. / seconde): 4.8 mA (mA)57.6mW ku) Matsakaicin RS485 na yanzu (1 meas. / 10 seconds): 0.5 mA (6 mW) Yanayin wuta mai ci gaba matsakaita na yanzu RS485: 17mA mai ci gaba (204mW) |
| Yawan Amfani a 12.5V (RS485) Ana iya amfani da shi lokacin amfani da "yanayin ƙarancin wuta"
Ba a ba da shawarar ga ƙananan ƙarfi ba Dangane da gyare-gyare idan akwai juyin halitta sassa na ciki |
jiran aiki ta atomatik ƙasa da 15 μA* (187.5 μW) max 1 mA
Matsakaicin kololuwar halin yanzu: 500 mA (1 ms) / 62.6 mA (6.5 ms) Matsakaicin halin yanzu yayin aunawa: 25 mA (312.5mW kuMatsakaicin halin yanzu yayin aunawa: 17 mA (212.5mW) Matsakaicin RS485 na yanzu (1 meas. / seconde): 4.8 mA (mA)60mW ku) Yanayin ƙarfin ci gaba matsakaita na yanzu RS485: 17 mA ci gaba (312.5mW) |
| Sensor | |
| Girma | Diamita: 27 mm; Tsawon: 171,5 mm |
| Nauyi | 350g (sensor + 3 m na USB) |
| Kayan abu | PVC, DELRIN, musamman pH gilashin, platinum, polyamide |
| Matsin lamba | 5 barce |
| Kebul | Coaxial sulke, Polyurethane, danda waya, ko Fisher connector |
CE yarda.
- Karkashin labarin 11 na umarnin 89/336 / EEC dangane da dacewa da lantarki.
- Mun ayyana cewa an gwada firikwensin dijital na kewayon DIGISENS firikwensin PHEHT Monobloc kuma an ayyana shi cikin dacewa da ƙa'idodin Turai lokacin amfani da shi cikin yanayin ci gaba da wutar lantarki.
- Daidaitaccen gwaje-gwaje: NF EN IEC 61326-1: 2021-06
- NF EN IEC 61326-1 (2021-06)
- Kayan lantarki don aunawa, sarrafawa, da amfani da dakin gwaje-gwaje - Bukatun EMC -
- Kashi na 1: Gabaɗaya bukatun.
NASARA NA AL'ADA [1]
- NF EN 55011: 2016-06 +/A1: 2017-06 +/A2: 2021-04
- Masana'antu, kimiyya, da kayan aikin likita - Halayen rikicewar mitar rediyo - Iyakoki da hanyoyin aunawa.
- Kariya: Radiated rigakafi TS EN 61000-4-3 muhallin masana'antu - Sharuɗɗan A
- TS EN 61000-4-2 muhallin masana'antu - Ma'auni B
- Yanayin gama gari TS EN 61000-4-6 Yanayin masana'antu - Sharuɗɗan A
- TS EN 61000-4-5 Yanayin masana'antu - Ma'auni B
- TS EN 61000-4-4 Yanayin masana'antu - Ma'auni B
- Saukewa: EN55011B
- Radiated hayaki - EN 55011 Rukuni na 1 - Class A
- Abubuwan da aka yi watsi da su - EN 55011 Rukuni na 1 - Class A
Gane tsarin aunawa wanda ya ƙunshi:
- bincike daya
- Kebul na Ponsel. EN 61000-4-5
Sunan Kasuwanci: DIGISENS
- Mai ƙira AQUALABO
- 90, Rue du Professeur P. Milliez
- 94506 Champiny sur Marne
- UE alhakin: AQUALABO
- 90, Rue du Professeur P. Milliez
- 94506 Champiny sur Marne
Bayani
Samfurin Ƙarsheview
- Haɗaɗɗen firikwensin PHEHT ya dogara ne akan ka'idar auna bambancin yuwuwar tsakanin na'urar tunani (Ag/AgCl) da na'urar ma'auni (gilashin pH na musamman don ma'aunin pH, da zobe na platinum don ma'aunin ORP).
- Ana ba da ma'aunin da aka dawo don zafin jiki na 25 °.
- An ƙera na'urar firikwensin PHEH Monobloc don yin aiki a cikin tabkuna da koguna, ruwan teku tare da abubuwan gudanarwa na 55 mS/cm, da ruwa mai datti tare da haɓakawa sama da 200 mS/cm.
- Wannan firikwensin yana nuna alamar "tsawon rai". Fasahar Plastogel® PONSEL tana haɓaka rayuwar binciken da buƙatar sake cikawa.
- An tsara wannan firikwensin kuma don aikace-aikacen hannu da kuma a cikin wurin aiki waɗanda suka kasance yanayi mafi wahala ga firikwensin pH / ORP dangane da juriya na firikwensin, amsawar lokaci mai sauri, dogaro kaɗan na kwarara, da ƙarancin wutar lantarki.
- Na'urar firikwensin yana fasalta ingantacciyar rigakafin tsangwama godiya ga hadedde preamplifier da sarrafa siginar dijital. Ƙimar da aka auna don pH ana biya ta atomatik tare da zafin jiki, kuma ana canjawa wuri ba tare da tsangwama ba zuwa naúrar nuni da mai sarrafawa ta hanyar sadarwa ta dijital. Sakamakon haka, aikin toshe-da-wasa na tsarin yana kunna ba tare da buƙatar sake daidaitawa ba. Har ila yau, firikwensin ya haɗa da littafin shiga mai ɗauke da ƙididdiga goma na ƙarshe na nasara a cikin nau'i na ma'ajin zobe.
Aikace-aikace
- Ƙaƙƙarfan firikwensin firikwensin ya dace musamman ga wuraren aikace-aikace masu zuwa:
- Masana'antu da na birni na kula da najasa
- Gudanar da ruwan sha (nitrification da de-nitrification)
- Kulawar ruwan saman
- Kula da ruwan sha
Gina da girma.
- Strainer na kariya
- Jikin firikwensin tare da ma'aunin lantarki
- Kebul bushing
- Kebul na haɗin haɗin gwiwa amintacce
Sadarwa.
Modbus RTU yayi rijista.
Dole ne tsarin haɗin gwiwar ya dace da MODBUS RTU. Duba takarda:
- Modbus_over_serial_line_V1_02.pdf
- Modbus_Application_Protocol_V1_1a.pdf
- Ƙwaƙwalwar Modbus don PONSEL Dijital Sensors: SENSOR_TramesCom_xxx_UK.xls ( koma zuwa AQUALABO website)
Jirgin žwažwalwar ajiya na Modbus iri ɗaya ne ga kowane siga na Sensors. Ka'idar Modbus don Sensors tana ba ku damar auna ma'aunin (+ zafin jiki) na Sensor da daidaita ma'aunin (+ zazzabi). Bugu da ƙari, akwai wasu lambobi na ayyuka kamar:
- Zaɓi matsakaicin ƙimar
- Karanta bayanin Sensor
- Koma zuwa tsoffin ƙididdiga
- Gyara adireshin Sensor
- Bayani game da matakan da aka gudanar (Matakan da ba a iya tantancewa, matakan da ake ci gaba, da sauransu).
- Kwanan wata da sunan ma'aikacin da ya yi gyare-gyare da dai sauransu.
Don samun ƙarin bayani kan buɗaɗɗen ka'idojin Modbus na PONSEL da fatan za a tuntuɓi sigar ƙarshe na waɗannan takaddun:
- pdf da file: Modbus_SpecificationsVxxx-EN
- The Excel file: Tsarin firikwensin Dijital_XXX_UK
Saukewa: SDI12.
- Akwai lissafin rajistar SDI12 don sadarwar cibiyar sadarwa. Koma zuwa ga AQUALABO web shafin don ƙarin bayani.
Matsalolin Zazzabi
- Ma'aunin pH ya dogara da sigogi:
- Zazzabi na matsakaicin ma'auni
- Ana adana wannan dogara a cikin na'urar auna firikwensin ta hanyar ayyuka.
- Saboda haka firikwensin zai iya ƙayyade pH na ma'aunin. matsakaita, don watsa abubuwan da ke tasiri a sama, cikin sigar diyya, zuwa mai watsawa/mai sarrafawa.
- Matsakaicin zafin jiki yana atomatik kuma ana sarrafa shi kai tsaye ta hanyar firikwensin haɗe-haɗe na zafin jiki (NTC).
Sampdarajar ling
- Na'urori masu auna firikwensin PHEHT ba sa aiwatar da kowane ma'auni mai ci gaba, amma yana yiwuwa a auna duk 500 mS.
Shigarwa
Zabin shigarwa na Sensor
Don shigar da na'urori masu auna firikwensin a cikin yanayin nutsewa ko shigar da bututu, muna ba da shawara ta amfani da na'urorin haɗi waɗanda AQUALABO suka daidaita kuma suka gabatar.
Na'urorin haɗi don shigarwa na nutsewa.
- A cikin yanayin nutsewa, wajibi ne don kula da firikwensin ta jiki kuma kada a bar firikwensin da kebul ya dakatar da shi a cikin haɗarin lalata firikwensin.
- AQUALABO ya ba da shawarar iyaka ko sanda (gajere da dogon sigar) don shigar da firikwensin a buɗaɗɗen kwanduna. Ana iya sanya shi nesa mai nisa daga gefen kwandon tare da rataye madaidaicin akan sarkar, misaliample.
Da fatan za a kula da waɗannan yayin shirin saitin ku:
- Dole ne abin da ya dace ya kasance cikin sauƙi don ba da damar firikwensin ko abin da ya dace da kansa don kiyayewa da tsaftacewa akai-akai
- Kada ka ƙyale dacewa (da haka kuma firikwensin) yayi murzawa da buga gefen kwandon
- Lokacin aiki tare da tsarin da ya haɗa da matsa lamba da/ko zafin jiki, tabbatar da cewa dacewa da firikwensin sun cika duk buƙatun da suka dace
- Dole ne mai ƙirar tsarin ya bincika cewa kayan da ke cikin dacewa da firikwensin sun dace da ma'auni (daidaituwar sinadarai, alal misali)
| Kayan abu | PVC |
| Zazzabi mai yarda | 0 zuwa 60 ° C |
| Matsin lamba max. | 5 barce |
Gajeren sanda
Ana samun guntun sandar a cikin nau'i biyu: sigar mai rufe baki. An haɗa bututun tallafi a cikin tayin.
|
PF-ACC-C-00609 |
GAJERIN WUTA
Abubuwan da aka bayar na PHEHT Monobloc SENSOR (1495 mm, RUWAN GINDI) |
sigar tare da shutter don hawa tare da sarkar An haɗa bututun tallafi a cikin tayin.
|
PF-ACC-C-00614 |
GAJERIN POLE NA PHEHT MONOBLOC SENSOR (1550 mm, RING SHUTTER) |
Dogon sanda
Ana samun dogayen sanduna a cikin nau'in gwiwar hannu, don shigarwa a cikin kwandon iska, da madaidaiciya, don aikace-aikace a cikin tashoshi masu buɗewa. Kowane sanda yana sanye da abin rufe fuska da kuma haɗin gwiwar hana ruwa. Ƙarƙashin ɓangaren ya haɗa da bututun ƙarfe wanda ya dace da firikwensin wanda ke tabbatar da goyon bayan injinsa.
Sanyin gwiwar hannu tare da rufewar gwiwar hannu
|
PF-ACC-C-00608 |
90° DOGON sanda na ELBOW GA PHEHT MONOBLOC SENSOR (2955 mm, RUWAN GINDI) |
Madaidaicin sandar sanda mai tsayi tare da murfi a gwiwar hannu
|
PF-ACC-C-00611 |
DOGON DOGON POLE GA PHEHT MONOBLOC SENSOR
(2745 mm, RUWAN GINDI) |
Na'urorin hawa don igiya.
Abubuwan da aka gyara don sanduna suna sassauƙa kuma an yi nazari na musamman don daidaitawa da daidaitawa daban-daban na taro.
Pole kit gyarawa
| NC-ACC-C-00009 | KATIN GYARAN POLY DOMIN LABARI NA LABARI (A KANANAN BANGO) |
| NC-ACC-C-00010 | KATIN GYARAN GASKIYA DOMIN LABARI NA LABARI (AKAN LIFE) |
| NC-ACC-C-00011 | KATIN GYARAN POLY DOMIN SENSORATAR LABARI (A TSAYEN AXIS) |
| PF-ACC-C-00272 | GASKIYA A tsaye DOMIN POLE SENSOR LABARI (ZA GYARA AKAN KASA) |
Kit ɗin kayan haɗi
Kayan kayan haɗi don haɗuwa da sanduna tare da sarkar.
| NC-ACC-C-00012 | KATIN GYARAN POLE DOMIN SENSOR LABARI (A KANANAN BANGO) |
| NC-ACC-C-00013 | KATIN GYARAN POLE DOMIN SENSOR LABARI (A LAYIN RAYUWA) |
| NC-ACC-C-00014 | KATIN GYARAN POLE DOMIN SENSOR LABARI (A TSAYE AXIS) |
Na'urorin haɗi don PVC bututu-hawa
- Ana isar da kowane tsarin taro tare da adaftan (da mahaɗin da suka dace) da kuma T guda ɗaya (90 ° don firikwensin PHEHT) don tsayawa akan bututu mai diamita 50 mm.
- Nau'in ƙirar sa na musamman yana tabbatar da madaidaicin shigar da firikwensin, don haka yana hana ma'aunin da ba daidai ba.
- Da fatan za a lura da waɗannan abubuwan yayin tsara tsarin saitin bututunku:
- Dole ne mai dacewa ya zama mai sauƙi don ba da damar firikwensin ko abin da ya dace da kansa don kiyayewa da tsaftacewa akai-akai.
- Muna ba da shawarar ma'aunin kewayawa. Dole ne ya yiwu a cire firikwensin ta hanyar amfani da bawuloli masu kashewa.
- Lokacin aiki tare da tsarin da ya haɗa da matsa lamba da/ko zafin jiki, tabbatar da cewa dacewa da firikwensin sun cika duk buƙatun da suka dace.
- Dole ne mai ƙirar tsarin ya bincika cewa kayan da ke cikin dacewa da firikwensin sun dace da ma'auni (daidaituwar sinadarai, alal misali)
Na'urorin haɗi na bakin karfe bututu-hawa
- Ana ba da shawarar kayan haɗi na haɗuwa don bututu mara nauyi tare da adaftan da haɗin gwiwa tare da ko ba tare da tsarin clamp / Nonuwa.
- Matsakaicin madaidaicin matsi don firikwensin shine sanduna 5.
- Za a iya ba da tsarin taro tare da ko ba tare da bakin karfe cl baamp.
- Adaftan ya dace da 51 mm diamita na waje clamp
- Tsarin hawa don firikwensin PHEHT (PF-ACC-C-00612)
- adaftan
- Bayanan Bayani na PHEHT
Na'urorin haɗi na Majalisar
Shigar da firikwensin a cikin kayan haɗi na taro
Saka a cikin sanda.
An ɗora firikwensin akan dacewa mai dacewa kamar yadda aka bayyana a ƙasa, ta amfani da mariƙin firikwensin, wanda za'a iya amfani da shi duka ga gajere da dogon sanda:
- Cire hular kariya akan firikwensin kuma saka firikwensin (2) cikin bututun ƙarfe (1) har zuwa tasha.
- Saka kebul na firikwensin a cikin bututu mai dacewa (6) kuma gabaɗaya ciyarwa.
- Maƙala mariƙin firikwensin tare da goro (5) akan bututu mai dacewa (6) kuma ƙara har sai hannuwa.
Shigar da tsarin hawan igiyar ruwa na PVC.
- Cire goro (3) daga madaidaicin kwararar PVC (1).
- Jagorar kebul na firikwensin ta hanyar goro a kan dacewa.
- Saka firikwensin (2) cikin dacewa har zuwa matsayin da aka nuna a tsakiyar hoton da ke sama.
- Maƙale goro a kan abin da ya dace har zuwa tasha.
Shigar da Bakin Karfe a cikin tsarin hawan bututu.
- Bayan walda clamp akan bututun bakin karfe, cire clamp daga tsarin kuma cire adaftar PVC.
- Cire goro daga adaftar.
- Jagorar kebul na firikwensin ta hanyar goro a kan adaftar kuma saka firikwensin tare da zoben kullewa a cikin abin da ya dace har zuwa tasha.
- Sake sanya adaftar a cikin nono, kuma a sake murƙushe goro.
Haɗin lantarki
Na'urar firikwensin zai iya isar da ita a cikin sigar danda ba ta da waya akan 3, 7, 15 m, ko kuma akan wani tsayin (har zuwa 100 m).
VNote:
- Kar a taba wuce juzu'itage na 10VDC (cikakkar madaidaicin ƙima) akan layin sadarwa RS485, A, ko B, ƙarƙashin hukuncin halakar da ba za a iya jurewa ba na bangaren transceiver RS 485.
- SDI-12: girmama voltage darajar da aka kwatanta a cikin ma'auni mai alaƙa (masu ƙima: 5 VDC)
- Koyaushe haɗa ƙasa + garkuwa da farko.
- Koyaushe haɗa V- (baƙar fata) + Garkuwa (Green/Yellow) daga firikwensin zuwa duka V-/0V/GND daga samar da wutar lantarki DA GND daga maigidan RS485/SDI12 don gujewa lalata firikwensin (kamar yadda RS485 ya bayyana).
Farawa da Kulawa
Farawa ta farko
- Da zarar an haɗa firikwensin zuwa tashar ku, firikwensin yana zaune a cikin na'urorin haɗin haɗin gwiwa kuma an aiwatar da ma'auni akan sashin nuni, firikwensin yana shirye don farawa na farko.
Lura:
- Don aunawa, dole ne ka kawar da kumfa da ke makale a ƙarƙashin kwan fitilar pH.
- Yayin gabatar da firikwensin a yanayin aunawa, jira yanayin zafin firikwensin kafin auna aiki.
Gilashin lantarki yana da rauni ga:
- sunadarai (masu kaushi na kwayoyin halitta, acid da tushe mai karfi, peroxide, hydrocarbons),
- jiyya na inji (tasiri).
- Redox m electrode yana kula da tallan sulfide akan platinum.
An fara:
- Cire baƙar hular kariya (ta hanyar riƙon kan firikwensin ƙasa da ta kwance murfin zuwa dama).
- Ana isar da firikwensin bushewa, kuma gilashin pH dole ne a sake mai da ruwa domin an inganta matakan.
- Bayan busassun ajiya, sake sanya kwan fitila na pH na tsawon sa'o'i 12 (dare ɗaya) a cikin daidaitaccen bayani pH4 ko a cikin maganin tsaftacewa da aka kawo daga AQUALABO Control (PF-CSO-C-00010).
Daidaitawa
- An daidaita firikwensin zuwa ƙayyadaddun bayanai a masana'anta. Yawan gyare-gyare ya dogara da aikace-aikacen (ya dogara da ɓata na firikwensin, a kan tafiyar da yanayin yanayi.) Idan ana buƙatar daidaitawa, bari firikwensin ya zo daidai da tsari kafin daidaitawa. Kar a daidaita firikwensin a saitin.
- Bayan an maye gurbin harsashi, yakamata a aiwatar da calibration.
- Hakanan yana da kyau a tsaftace firikwensin akai-akai a cikin maganin tsaftacewa (PF-CSO-C-00010) (duba Babi Maintenance 5.3).
- Tare da gyare-gyaren maki biyu, ma'aunin sifili (sakewa tare da daidaitaccen bayani) da gangare (maganin ma'auni na biyu) na firikwensin an daidaita su. Wannan hanyar daidaitawa tana ba da mafi girman matakin daidaito mai yuwuwa kuma ana ba da shawarar musamman.
pH calibration. Gyaran daidaitawa.
Ana aiwatar da shi kamar haka:
- Na'urar firikwensin da aka tsaftace (don duba babi na 5.3) an nutsar da shi a cikin daidaitaccen bayani na farko (PH 7.01 a 25 ° C don example) don ƙayyade ma'anar sifili (offset). Kula da daidaitaccen bayani a ƙarƙashin tashin hankali kuma jira firikwensin ya sanya kansa cikin ma'auni tare da zazzabi na daidaitaccen bayani.
- PH na daidaitaccen bayani ya bambanta da zafin jiki, lura da zafin jiki na maganin kuma koma zuwa kwamitin bambancin pH bisa ga zafin jiki don gyara ƙimar pH da za a daidaita.
- Don misaliample, don daidaitaccen bayani pH 7.01 a 25 ° C idan zazzabi na daidaitaccen bayani shine 20 ° C ƙimar pH shine 7.03.
| Daidaitaccen PH 7.01 a 25 ° C | °C | °F | pH |
| 0 | 32 | 7.13 | |
| 5 | 41 | 7.10 | |
| 10 | 50 | 7.07 | |
| 15 | 59 | 7.04 | |
| 20 | 68 | 7.03 | |
| 25 | 77 | 7.01 | |
| 30 | 86 | 7.00 | |
| 35 | 95 | 6.99 | |
| 40 | 104 | 6.98 | |
| 45 | 113 | 6.98 |
- Wanka (da ruwa mai tsafta) da bushewar firikwensin da yadi mai laushi ko takarda mai sha.
Gyaran gangara.
- An ƙayyade gangaren firikwensin ta hanyar sanyawa a cikin maganin buffer pH na biyu.
- Nutsar da firikwensin a cikin daidaitaccen bayani da aka zaɓa, kula da daidaitaccen bayani a ƙarƙashin tashin hankali, kuma jira firikwensin ya sanya kansa cikin daidaito tare da zazzabi na daidaitaccen bayani.
- PH na daidaitaccen bayani ya bambanta da zafin jiki, lura da zafin jiki na maganin kuma koma zuwa kwamitin bambancin pH bisa ga zafin jiki don gyara ƙimar pH da za a daidaita.
- Don misaliample, don daidaitaccen bayani pH 4.01 a 25 ° C idan zazzabi na daidaitaccen bayani shine 20 ° C ƙimar pH shine 4.00.
| Daidaitaccen PH 4.01 a 25°C | °C | °F | pH |
| 0 | 32 | 4.01 | |
| 5 | 41 | 4.00 | |
| 10 | 50 | 4.00 | |
| 15 | 59 | 4.00 | |
| 20 | 68 | 4.00 | |
| 25 | 77 | 4.01 | |
| 30 | 86 | 4.02 | |
| 35 | 95 | 4.03 | |
| 40 | 104 | 4.04 | |
| 45 | 113 | 4.05 |
- Duba yuwuwar Redox.
Bikin diyya.
- Mataki na farko a cikin daidaitawa shine saita saiti ta hanyar fallasa firikwensin zuwa iska. An saita tsohuwar ƙimar wannan ma'auni a 0 mV kuma ba za a iya canzawa ba. Jira tabbatar da ma'auni kuma tabbatar da ma'anar daidaitawa.
Tabbatar da gangara.
- Nitsar da firikwensin a cikin daidaitaccen bayani da aka zaɓa (240mV don example), kula da daidaitaccen bayani a ƙarƙashin tashin hankali, kuma jira firikwensin ya sanya kansa cikin ma'auni tare da zafin jiki na daidaitaccen bayani.
- Wanka (da ruwa mai tsafta) da bushewar firikwensin da yadi mai laushi ko takarda mai sha.
Kulawa
- Jadawalin kulawa yana nuna ƙaramin tazara don ayyukan kulawa na yau da kullun. Yi ayyukan kulawa akai-akai don aikace-aikacen da ke haifar da lalatawar lantarki.
- Lura: Kada a tarwatsa binciken don kulawa ko tsaftacewa.
- Dole ne koyaushe a kiyaye firikwensin mai tsabta, musamman a yankin da ke kusa da kwan fitila na pH da faifan platinum (Ma'aunin Redox).
- Kasancewar biofilm akan kwan fitila na pH na iya haifar da kuskuren aunawa.
- Don kwan fitila pH, Ya kamata a tsaftace kwan fitila mai datti da dumi, ruwan sabulu.
- Don ma'aunin redox, tsaftace faifan platinum don inganta ma'aunin yuwuwar redox.
- Idan na'urar firikwensin ba ta aiki, sai a wanke ta kafin a adana ta, sannan a sanya hular kariyar da abin kariya da kuma wani wuri mai ɗanɗano mai ɗanɗano (kamar auduga).
Tsaftacewa.
- Kurkure sosai da firikwensin da kwan fitila tare da bayyanannen ruwa.
- Don gilashin pH: idan adibas kamar biofilm ko laka sun ci gaba, sanya firikwensin a cikin maganin tsaftacewa (1SN004) na ƴan sa'o'i da kurkura sosai kafin amfani.
- Ka guji yin amfani da zane mai laushi ko takarda mai ɗaukar nauyi saboda ƙwallon gilashin yana da matuƙar rauni ga gogayya.
- Don ɓangaren Redox, tsaftace faifan platinum tare da takarda mai laushi mai laushi (nau'in P1200 ko P220) kuma kurkura wutar lantarki da ruwa mai tsabta.
- Electrolyte "PLASTOGEL" ® yana sadarwa kai tsaye tare da yanayin waje ba tare da tsaka-tsakin capillary ko porous ba. Don haka babu haɗarin rufewa ko rushe bayanin.
- Plastogel yana son zama talauci a cikin KCl bisa ga amfani da firikwensin PHEHT. Lokacin da Plastogel ya ƙare, binciken ba zai sake amsa bambancin pH ba kuma yana jinkirin daidaitawa.
- A wannan yanayin, ya zama dole don ci gaba zuwa canjin firikwensin.
BAYANIN HULDA
- AQUALABO Bayan-Sabis Sabis
- AQUALABO
- 115 Rue Michel MARION
- 56850 CAUDAN
- FRANCE
- Tel.: + 33 (0) 4 11 71 97 41
- AQUALABO
- 90 Rue du farfesa P. Milliez
- 94506 ChampMarne Faransa
- Tel.: +33 (0) 1 55 09 10 10
- Sigar 1.1
- Sabuntawa: Maris 2024
Takardu / Albarkatu
 |
Sigar AQUALABO Monobloc Pheht Sensor Lamba [pdf] Manual mai amfani Sigar Monobloc Pheht Sensor Lambobi, Sensor Lambobi na Pheht, Sensor Lambobin Pheht, Sensor Lambobi, Sensor |
