Bayani na AOC24G2SAE
Ƙayyadaddun bayanai
- Samfura: 24G2SE/24G2SAE
- Tushen wuta: Nau'in da aka nuna akan lakabin
- Shigar da wutar lantarki: 100-240V AC, Min. 5A
Tsaro
Taron kasa
Ƙananan sassan da ke gaba suna bayyana ƙa'idodin ƙa'idodin da aka yi amfani da su a cikin wannan takarda.
Bayanan kula, Gargaɗi, da Gargaɗi
A cikin wannan jagorar, tubalan rubutu na iya kasancewa tare da gunki kuma a buga shi da nau'in m ko cikin nau'in rubutun. Waɗannan tubalan bayanin kula ne, gargaɗi, da gargaɗi, kuma ana amfani da su kamar haka:
NOTE: NOTE yana nuna mahimman bayanai waɗanda ke taimaka maka yin amfani da tsarin kwamfutarka da kyau.
HANKALI: Tsanaki yana nuna yiwuwar lalacewar hardware ko asarar bayanai kuma yana gaya muku yadda zaku guje wa matsalar.
GARGADI: WARNING yana nuna yuwuwar cutar da jiki kuma yana gaya muku yadda zaku guje wa matsalar. Wasu gargaɗin na iya bayyana a madadin tsari kuma ƙila ba su tare da gunki. A irin waɗannan lokuta, ƙayyadaddun gabatar da gargaɗin yana da izini ta hanyar hukuma.
Ƙarfi
- Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.
- Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi tare da fil na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
- Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare
saka idanu daga lalacewa saboda hauhawar wutar lantarki. - Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki.
- Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A.
- Za a shigar da soket ɗin bango a kusa da kayan aiki kuma ya zama mai sauƙi.
Shigarwa
- Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, tawul, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafkuna, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.
- Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Zai iya lalata sassan kewaye da ke haifar da wuta ko lantarki
gigice. Kada a taɓa zubar ruwa a kan duba. - Kada a sanya gaban samfurin a ƙasa.
- Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
- Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.
- Don gujewa yuwuwar lalacewa, ga misaliampidan panel ɗin yana barewa daga bezel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5. Idan madaidaicin kusurwa -5 digiri na ƙasa ya wuce, lalacewar na'urar ba za a rufe ƙarƙashin garanti ba.
- Duba ƙasa da shawarwarin wuraren samun iska a kusa da mai saka idanu lokacin da aka shigar da na'urar a bango ko a tsaye:
An shigar dashi tare da tsayawa
Tsaftacewa
- Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
- Lokacin tsaftacewa, tabbatar da cewa ba a zubar da wanki a cikin samfurin ba. Tufafin tsaftacewa bai kamata ya zama mai tauri ba saboda zai tarar da fuskar allo.
- Da fatan za a cire haɗin wutar lantarki kafin tsaftace samfurin.
Sauran
- Idan samfurin yana fitar da wani bakon kamshi, sauti ko hayaki, cire haɗin wutar lantarki NAN TAKE kuma tuntuɓi Cibiyar Sabis.
- Tabbatar cewa ba'a toshe wuraren buɗewar da tebur ko labule.
- Kada a sa na'urar duba LCD a cikin tsananin girgiza ko yanayin tasiri yayin aiki.
- Kar a ƙwanƙwasa ko sauke na'urar duba yayin aiki ko sufuri.
Saita
Abubuwan da ke cikin Akwati
Ba duk siginar igiyoyi (DP, HDMI igiyoyi) za a bayar ga duk ƙasashe da yankuna. Da fatan za a bincika tare da dila na gida ko ofishin reshe na AOC don tabbatarwa.
Saita Tsaya & Tushe
Da fatan za a saita ko cire tushe ta bin matakan kamar ƙasa.
Saita:
Cire:
Daidaitawa Viewcikin Angle
Don mafi kyau duka viewAna ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar mai duba zuwa naka zaɓi.
Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.
Kuna iya daidaita mai duba kamar a ƙasa:
NOTE:
Kada ku taɓa allon LCD lokacin da kuke canza kusurwa. Yana iya haifar da lalacewa ko karya allon LCD.
Gargadi
- Don guje wa yuwuwar lalacewar allo, kamar bawon panel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5.
- Kar a danna allon yayin daidaita kusurwar mai duba. Riƙe bezel kawai.
Haɗa Monitor
Haɗin Kebul A Bayan Kula da Kwamfuta:
- HDMI-2
- HDMI-1
- DP
- D-SUB
- Sauti a ciki
- Wayar kunne
- Ƙarfi
Haɗa zuwa PC
- Haɗa igiyar wutar lantarki zuwa bayan nuni da ƙarfi.
- Kashe kwamfutarka kuma cire igiyoyin wutar lantarki.
- Haɗa kebul ɗin siginar nuni zuwa mai haɗin bidiyo a bayan kwamfutarka.
- Toshe igiyar wutar lantarki na kwamfutarku da nunin ku zuwa mashigar da ke kusa.
- Kunna kwamfutarka kuma nunawa.
Idan duban ku ya nuna hoto, shigarwa ya cika. Idan baya nuna hoto, da fatan za a duba Shirya matsala. Don kare kayan aiki, koyaushe kashe PC da LCD duba kafin haɗawa.
Hawan bango
Ana Shiri Don Shigar Hannun Dutsen bango Na zaɓi.
Ana iya haɗa wannan na'ura mai duba zuwa hannun bangon bango da kuka saya daban. Cire haɗin wuta kafin wannan hanya. Bi waɗannan matakan:
- Cire tushe.
- Bi umarnin masana'anta don haɗa hannun hawan bango.
- Sanya hannun hawan bango a bayan na'urar duba. Yi layi a ramukan hannu tare da ramukan a bayan mai duba.
- Sake haɗa igiyoyin. Koma zuwa littafin jagorar mai amfani wanda ya zo tare da hannun ɗaurin bango na zaɓi don umarnin liƙa shi zuwa bango.
An lura: Babu ramukan hawa na VESA don kowane samfuri, da fatan za a bincika tare da dila ko sashen hukuma na AOC.
* Tsarin nuni na iya bambanta da waɗanda aka kwatanta.
Gargadi
- Don guje wa yuwuwar lalacewar allo, kamar bawon panel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5.
- Kar a danna allon yayin daidaita kusurwar mai duba. Riƙe bezel kawai.
Ayyukan daidaitawa-Aiki (akwai don zaɓin ƙira)
- Ayyukan Adawa-Sync yana aiki tare da DP/HDMI
- Katin Graphics mai jituwa: Jerin shawarwarin kamar na ƙasa ne, kuma ana iya bincika ta ziyartar www.AMD.com
- Jerin Radeon ™ RX Vega
- Radeon series RX 500 jerin
- Radeon series RX 400 jerin
- Radeon™ R9/R7 300 jerin (R9 370/X, R7 370/X, R7 265 sai dai)
- Radeon Pro Duo (2016)
- Jerin Radeon ™ R9 Nano
- Radeon™ R9 Fury jerin
- Jerin Radeon ™ R9/R7 200 (R9 270/X, R9 280/X ban da)
Daidaitawa
Hotkeys
| 1 | Tushen/Fita |
| 2 | Yanayin Wasa/ |
| 3 | Kiran Kira /> |
| 4 | Menu/Shiga |
| 5 | Ƙarfi |
- Ƙarfi
Danna maɓallin wuta don kunna mai duba. - Menu/Shiga
Lokacin da babu OSD, Danna don nuna OSD ko tabbatar da zaɓin. Danna kamar daƙiƙa 2 don kashe mai duba. - Wasan Yanayin/
Lokacin da babu OSD, danna maɓallin "<" don buɗe aikin yanayin wasan, sannan danna maɓallin "<" ko ">" don zaɓar yanayin wasan (FPS, RTS, Racing, Gamer 1, Gamer 2 ko Gamer 3) dogara akan tsarin wasan. nau'ikan wasa daban-daban. - Kiran Kira />
Lokacin da babu OSD, danna maɓallin Dial Point don nunawa / ɓoye Dial Point. - Tushen/Fita
Lokacin da OSD ke rufe, danna Maballin Maɓalli/Fita zai zama aikin maɓallin zafi mai zafi.
Lokacin da OSD ke rufe, danna Maɓallin Maɓalli/Fita ci gaba da kusan daƙiƙa 2 don yin saiti ta atomatik (Sai don samfuran tare da D-Sub).
Saitin OSD
Umarni na asali da sauƙi akan maɓallan sarrafawa.
- Danna maɓallin MENU don kunna OSD taga.
- Danna < ko > don kewaya cikin ayyukan. Da zarar aikin da ake so ya haskaka, danna maballin MENU don kunna shi, danna <ko> don kewaya cikin ayyukan ƙananan menu. Da zarar aikin da ake so ya haskaka, danna maɓallin MENU don kunna shi.
- Danna < ko > don canza saitunan aikin da aka zaɓa. Danna maɓallin AUTO-don fita. Idan kuna son daidaita kowane
sauran ayyuka, maimaita matakai 2-3. - Ayyukan Kulle OSD: Don kulle OSD, danna ka riƙe maɓallin MENU yayin da mai saka idanu ke kashe sannan danna maɓallin wuta don kunna mai duba. Don buɗe OSD - latsa ka riƙe maɓallin MENU yayin da mai saka idanu ke kashe sannan danna maɓallin wuta don kunna mai duba.
Bayanan kula
- Idan samfurin yana da shigarwar siginar guda ɗaya kawai, abu na "Input Select" yana kashe don daidaitawa.
- DCR, Boost Color da Boost Picture, ga waɗannan jihohin cewa jiha ɗaya ce kawai zata iya wanzu
Hasken haske
Lura:
Lokacin da aka gano HDR, ana nuna zaɓin HDR don daidaitawa; lokacin da ba a gano HDR ba, ana nuna zaɓin Yanayin HDR don daidaitawa.
Saitin Hoto
|
Agogo | 0-100 | Daidaita agogon hoto don rage amo a tsaye-Layi. |
| Mataki | 0-100 | Daidaita Matakin Hoto don rage amo a tsaye-Line | |
| Kaifi | 0-100 | Daidaita kaifin hoto | |
| H. Matsayi | 0-100 | Daidaita matsayi a kwance na hoton. | |
| V. Matsayi | 0-100 | Daidaita matsayi na tsaye na hoton. |
Saita Launi
|
|
Zazzabi Launi. |
Dumi | Tuna Zazzaɓin Launi mai Dumi daga EEPROM. | |
| Na al'ada | Tuna Yanayin Launi na Al'ada daga EEPROM. | |||
| Sanyi | Tuna Zazzaɓin Launi mai sanyi daga EEPROM. | |||
| sRGB | Tuna Yanayin Launi na SRGB daga EEPROM. | |||
|
Mai amfani |
Ja | Red Riba daga Digital-rejista | ||
| Kore | Green Gain Digital-rejista. | |||
| Blue | Blue Gain daga Digital-rejista | |||
|
Yanayin DCB |
Cigaba | kunnawa ko kashewa | A kashe ko Kunna Cikakken Yanayin Haɓakawa | |
| Nature Fata | kunnawa ko kashewa | A kashe ko Kunna Yanayin fata na yanayi | ||
| Filin Green | kunnawa ko kashewa | A kashe ko Kunna Yanayin Filin Kore | ||
| Sky-blue | kunnawa ko kashewa | A kashe ko Kunna Yanayin Sky-blue | ||
| Gano atomatik | kunnawa ko kashewa | A kashe ko Kunna Yanayin AutoDetect | ||
| KASHE | kunnawa ko kashewa | A kashe ko Kunna Yanayin DCB | ||
| Demo na DCB | kunnawa ko kashewa | A kashe ko Kunna Demo | ||
| Ja | 0-100 | Jan riba daga Digital-rejista. | ||
| Kore | 0-100 | Green riba daga Digital-rejista. | ||
| Blue | 0-100 | Blue riba daga Digital-rejista. |
Lura:
Lokacin da "HDR Mode" karkashin "Luminance" aka saita zuwa mara-kashe jihar, duk abubuwa karkashin "Launi Saita" ba za a iya gyara.
Haɓaka Hoto
|
Firam mai haske | kunnawa ko kashewa | A kashe ko Kunna Firam mai haske |
| Girman Firam | 14-100 | Daidaita Girman Firam | |
| Haske | 0-100 | Daidaita Tsarin Haske | |
| Kwatancen | 0-100 | Daidaita Ma'auni na Frame | |
| H. matsayi | 0-100 | Daidaita Frame a kwance Matsayi | |
| V. matsayi | 0-100 | Daidaita Frame Matsayi na tsaye |
Lura:
Lokacin da “Yanayin HDR” a ƙarƙashin “Luminance” aka saita zuwa yanayin da ba a kashe ba, duk abubuwan da ke ƙarƙashin “Boost Hoto” ba za a iya daidaita su ba.
OSD Saita
|
Harshe | Zaɓi harshen OSD | |
| Lokaci ya ƙare | 5-120 | Daidaita Lokacin OSD | |
|
Damar DP |
1.1/1.2/1.4 |
Da fatan za a lura cewa kawai goyon bayan DP1.2/DP1.4
Adaptive-Sync/AMD FreeSync Premium/G-SYNC aiki |
|
| H. Matsayi | 0-100 | Daidaita matsayi na kwance na OSD | |
| V. Matsayi | 0-100 | Daidaita matsayi na OSD a tsaye | |
| Ƙarar | 0-100 | Daidaita Ƙarar. | |
| Gaskiya | 0-100 | Daidaita nuna gaskiya na OSD | |
| Tunatarwa Hutu | kunnawa ko kashewa | Rage tunatarwa idan mai amfani ya ci gaba da aiki don ƙarin
fiye 1hrs |
Lura:
Idan abun cikin bidiyo na DP yana goyan bayan DP1.2/DP1.4, don Allah zaɓi DP1.2/DP1.4 don DP Capability; in ba haka ba, don Allah zaɓi DP1.1
Saitin Wasan
 |
Yanayin Wasan | FPS | Don kunna wasannin FPS (Masu harbin Mutum na farko). Yana haɓaka bayanan matakin baƙar fata mai duhu. |
| RTS | Don kunna RTS (Dabarun Lokaci na Gaskiya). Inganta ingancin hoto. | ||
| Racing | Don yin wasannin tsere, Yana ba da lokacin amsawa mafi sauri da jikewar launi. | ||
| Gamer 1 | An adana saitunan zaɓin mai amfani azaman Gamer 1. | ||
| Gamer 2 | An adana saitunan zaɓin mai amfani azaman Gamer 2. | ||
| Gamer 3 | An adana saitunan zaɓin mai amfani azaman Gamer 3. | ||
| kashe | Babu haɓakawa ta hanyar wasan hoto na Smart | ||
| Ikon Inuwa | 0-100 | Shadow Control Default shine 50, sannan mai amfani na ƙarshe zai iya daidaitawa daga 50 zuwa 100 ko 0 don ƙara bambanci don bayyananniyar hoto.1. Idan hoto ya yi duhu sosai don a gan shi dalla-dalla, daidaitawa daga 50 zuwa 100 don bayyananniyar hoto.2. Idan hoton ya yi fari da yawa don a gan shi dalla-dalla a sarari, daidaitawa daga 50 zuwa 0 don bayyananniyar hoto | |
| Overdrive | Mai rauni | Daidaita lokacin amsawa. | |
| Matsakaici | |||
| Mai ƙarfi | |||
| Ƙara | |||
| Kashe | |||
| Launin Wasan | 0-20 | Launin Wasan zai samar da matakin 0-20 don daidaita jikewa don samun ingantacciyar hoto. | |
| Yanayin LowBlue | Karatu / Office / Intanet / Multimedia / A kashe | Rage igiyar hasken shuɗi ta hanyar sarrafa zafin launi. | |
| MBR | 0 ~ 20 | Daidaita Mutuwar Rufewar Motsi. | |
| Adaptive-Sync | Kunna/Kashe | Daidaita Adaptive-Sync. | |
| Madaidaicin Counter | Kashe / Dama- sama / Dama-saukar / Hagu- ƙasa / Hagu-Up | Nuna mitar V akan kusurwar da aka zaɓa |
Lura:
Ana samun aikin MBR da Overdrive Boost kawai lokacin da Adaptive-Sync/AMD FreeSync Premium/G-SYNC ke kashe kuma mitar a tsaye ta kai 75 Hz.
Ƙari
|
Input Zabi | Zaɓi Tushen Siginar shigarwa | |
| Sanya atomatik. | eh ko a'a | Daidaita hoton ta atomatik zuwa tsoho | |
| A kashe mai ƙidayar lokaci | 0hrs | Zaɓi lokacin kashe DC | |
|
Girman Hoto |
Fadi |
Zaɓi rabon hoto don nunawa. |
|
| 4:3 | |||
| DDC/CI | eh ko a'a | Kunna/KASHE Tallafin DDC/CI | |
| Sake saiti | eh ko a'a | Sake saita menu zuwa tsoho. |
Fita
Alamar LED
| Matsayi | Launi na LED |
| Cikakken Yanayin Ƙarfi | Fari |
| Yanayin Kashe Aiki | Lemu |
Shirya matsala
| Matsala & Tambaya | Mahimman Magani |
| Wutar Wuta Ba a Kunnawa | Tabbatar cewa maɓallin wuta yana kunne kuma Igiyar Wutar tana haɗe da kyau zuwa tashar wutar lantarki ta ƙasa da kuma na'urar duba. |
|
Babu hotuna akan allon |
Ana haɗa igiyar wutar lantarki daidai?
Duba haɗin igiyar wutan lantarki da wutan lantarki. An haɗa kebul daidai? (An haɗa ta amfani da kebul na VGA) Duba haɗin kebul na VGA. (An haɗa ta amfani da kebul na HDMI) Duba haɗin kebul na HDMI. (An haɗa ta amfani da kebul na DP) Duba haɗin kebul na DP. * Ba a samun shigarwar VGA/HDMI/DP akan kowane samfurin. Idan wuta tana kunne, sake kunna kwamfutar don ganin allon farko (allon shiga), wanda za'a iya gani. Idan allon farko (allon shiga) ya bayyana, kunna kwamfutar a cikin yanayin da ya dace (yanayin aminci don Windows 7/8/10) sannan canza mitar katin bidiyo. (Duba zuwa Saitin Mafi kyawun Ƙimar) Idan allon farko (allon shiga) bai bayyana ba, tuntuɓi Cibiyar Sabis ko dilan ku. Shin kuna iya ganin "Ba a Tallafin Shigarwa" akan allon? Kuna iya ganin wannan saƙon lokacin da sigina daga katin bidiyo ya wuce iyakar ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Daidaita matsakaicin ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Tabbatar cewa an shigar da Direbobi na AOC. |
|
Hoto Mai Haushi ne & Yana Da Matsalolin Shadowing Fatalwa |
Daidaita Ƙarfi da Ƙarfafawa. Danna don daidaitawa ta atomatik.
Tabbatar cewa ba kwa amfani da kebul na tsawo ko akwatin canzawa. Muna ba da shawarar toshe na'urar kai tsaye zuwa mai haɗa fitarwar katin bidiyo a baya. |
| Hoto Bounces, Flickers Ko Tsarin Kalamai Ya Bayyana A Hoton | Matsar da na'urorin lantarki waɗanda zasu iya haifar da kutsewar lantarki zuwa nesa da su
mai saka idanu kamar yadda zai yiwu. Yi amfani da matsakaicin ƙimar wartsakewa mai saka idanu zai iya a ƙudurin da kuke amfani da shi. |
|
Monitor yana Makale A Kashe Aiki- Yanayin" |
Ya kamata Maɓallin Wutar Kwamfuta ya kasance a wurin ON.
Katin Bidiyon Kwamfuta yakamata a sanya shi da kyau a cikin ramin sa. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. Duba kebul na bidiyo na mai duba kuma tabbatar da cewa ba a lanƙwasa fil ba. Tabbatar cewa kwamfutarka tana aiki ta hanyar buga maɓallin CAPS LOCK akan keyboard yayin kallon CAPS LOCK LED. LED ya kamata ya kunna ko Kashe bayan buga maɓallin LOCK na CAPS. |
| Rasa ɗayan manyan launuka (RED, GREEN, ko BLUE) | Duba kebul na bidiyo na mai saka idanu kuma tabbatar da cewa babu fil da ya lalace. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. |
| Hoton allo baya tsakiya ko girmansa yadda ya kamata | Daidaita H-Position da V-Position ko latsa hot-key (AUTO). |
| Hoton yana da lahani masu launi (farin ba ya kama da fari) | Daidaita launi RGB ko zaɓi zafin launi da ake so. |
| Rikici a kwance ko a tsaye akan allon | Yi amfani da yanayin rufe Windows 7/8/10 don daidaita CLOCK da FOCUS. Danna don daidaitawa ta atomatik. |
|
Ka'ida & Sabis |
Da fatan za a koma zuwa Doka & Bayanin Sabis wanda ke cikin littafin CD ko www.aoc.com (don nemo samfurin da kuka saya a cikin ƙasarku kuma don nemo Dokoki & Bayanin Sabis a shafi na Tallafi.) |
Ƙayyadaddun bayanai
Ƙididdigar Gabaɗaya
|
Panel |
Sunan samfurin | Saukewa: CQ27G3Z | ||
| Tsarin tuki | TFT launi LCD | |||
| Viewiya Girman Hoto | 68.5 cm diagonal | |||
| Matsakaicin pixel | 0.2331mm(H) x 0.2331mm(V) | |||
|
Wasu |
Takaitaccen sikelin sikelin | 30k-230kHz (HDMI)
30k-255kHz (DP) |
||
| Girman sikanin kwance (Mafi girman) | 596.736mm ku | |||
| Tsayin sikelin tsaye | 48-144Hz (HDMI)
48-240Hz (DP) |
|||
| Girman Duban Tsaye (Mafi girman) | 335.664mm ku | |||
| Mafi kyawun ƙudurin saiti | 2560×1440@60Hz | |||
| Matsakaicin ƙuduri | 2560×1440@144Hz (HDMI)
2560×1440@240Hz (DP) |
|||
| Toshe & Kunna | VESA DDC2B/CI | |||
| Tushen wutar lantarki | 100-240V~, 50/60Hz, 1.5A | |||
|
Amfanin Wuta |
Na al'ada (Tsohon haske da bambanci) | 32W | ||
| Max. (haske = 100, bambanci = 100) | ≤ 68W | |||
| Yanayin jiran aiki | ≤ 0.3W | |||
| Halayen Jiki | Nau'in Haɗawa | HDMI/DP/Earphone | ||
| Nau'in Siginar Kebul | Mai iya cirewa | |||
|
Muhalli |
Zazzabi | Aiki | 0° ~ 40° | |
| Mara Aiki | -25° ~ 55° | |||
| Danshi | Aiki | 10% ~ 85% (ba mai sanyawa) | ||
| Mara Aiki | 5% ~ 93% (ba mai sanyawa) | |||
| Tsayi | Aiki | 0 ~ 5000 m (0 ~ 16404 ft) | ||
| Mara Aiki | 0 ~ 12192m (0 ~ 40000ft) | |||
|
Panel |
Sunan samfurin | 24G2SAE/24G2SAE/BK | ||
| Tsarin tuki | TFT launi LCD | |||
| Viewiya Girman Hoto | 60.5 cm diagonal | |||
| Matsakaicin pixel | 0.2745mm(H) x 0.2745mm(V) | |||
| Bidiyo | R, G, B Interface & HDMI lnterface & DP Interface | |||
| Rarraba Daidaitawa. | H/V TTL | |||
| Nuni Launi | 16.7M Launuka | |||
|
Wasu |
Takaitaccen sikelin sikelin | 30k-160kHz(D-SUB/HDMI)
30k-200kHz(DP) |
||
| Girman sikanin kwance (Mafi girman) | mm527.04 ku | |||
| Tsayin sikelin tsaye | 48-144Hz (HDMI)
48-165Hz(DP) |
|||
| Girman Duban Tsaye (Mafi girman) | mm296.46 ku | |||
| Mafi kyawun ƙudurin saiti | 1920×1080@60Hz | |||
|
Matsakaicin ƙuduri |
1920 x 1080@60Hz (D-SUB)
1920 x 1080 @ 144Hz (HDMI) 1920 x 1080 @ 165Hz (DP) |
|||
| Toshe & Kunna | VESA DDC2B/CI | |||
| Mai Haɗa Input | HDMIx2/DP/VGA | |||
| Siginar Bidiyo ta Shiga ciki | Analog: 0.7Vp-p (daidaitacce), 75 OHM, TMDS | |||
| Mai Haɗin Kaɗawa | Phonearar kunne ta fita | |||
| Tushen wutar lantarki | 100-240V~, 50/60Hz,1.5A | |||
|
Amfanin Wuta |
Na al'ada (Tsohuwar haske da bambanci) | 22W | ||
| Max. (haske = 100, bambanci = 100) | ≤ 36W | |||
| Yanayin jiran aiki | ≤ 0.3W | |||
| Halayen Jiki | Nau'in Haɗawa | VGA/HDMI/DP/Audio ciki/Fitar kunne | ||
| Nau'in Siginar Kebul | Mai iya cirewa | |||
|
Muhalli |
Zazzabi | Aiki | 0° ~ 40° | |
| Mara Aiki | -25° ~ 55° | |||
| Danshi | Aiki | 10% ~ 85% (ba mai sanyawa) | ||
| Mara Aiki | 5% ~ 93% (ba mai sanyawa) | |||
| Tsayi | Aiki | 0 ~ 5000 m (0 ~ 16404 ft) | ||
| Mara Aiki | 0 ~ 12192m (0 ~ 40000ft) | |||
Hanyoyin Nuni da Saiti
| STANDARD | HUKUNCI | HORIZONTAL
YAWAITA (kHz) |
MA'ANANTA
YAWAITA(Hz) |
|
VGA |
640×480@60Hz | 31.469 | 59.94 |
| 640×480@72Hz | 37.861 | 72.809 | |
| 640×480@75Hz | 37.5 | 75 | |
| 640×480@100Hz | 50.313 | 99.826 | |
| 640×480@120Hz | 60.938 | 119.72 | |
|
Farashin SVGA |
800×600@56Hz | 35.156 | 56.25 |
| 800×600@60Hz | 37.879 | 60.317 | |
| 800×600@72Hz | 48.077 | 72.188 | |
| 800×600@75Hz | 46.875 | 75 | |
| 800×600@100Hz | 62.76 | 99.778 | |
| 800×600@120Hz | 76.302 | 119.972 | |
|
Farashin XGA |
1024×768@60Hz | 48.363 | 60.004 |
| 1024×768@70Hz | 56.476 | 70.069 | |
| 1024×768@75Hz | 60.023 | 75.029 | |
| 1024×768@100Hz | 80.448 | 99.811 | |
| 1024×768@120Hz | 97.551 | 119.989 | |
|
SXGA |
1280×1024@60Hz | 63.981 | 60.02 |
| 1280×1024@75Hz | 79.976 | 75.025 | |
|
FHD |
1920×1080@60Hz | 67.5 | 60 |
| 1920×1080@120Hz | 139.1 | 119.93 | |
|
QHD |
2560×1440@60Hz | 88.787 | 59.951 |
| 2560×1440@120Hz | 182.997 | 119.998 | |
| 2560×1440@144Hz | 222.056 | 143.912 | |
| 2560×1440@165Hz(DP) | 242.55 | 165 | |
| IBM MODES | |||
| DOS | 720×400@70Hz | 31.469 | 70.087 |
| MAGANAR MAC | |||
| VGA | 640×480@67Hz | 35 | 66.667 |
| Farashin SVGA | 832×624@75Hz | 49.725 | 74.551 |
| Farashin XGA | 1024×768@75Hz | 60.241 | 74.927 |
Sanya Ayyuka
19-Cable Signal Cable Signal Cable
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1. | Bayanan TMDS 2+ | 9. | Bayanan TMDS 0- | 17. | DDC/CEC Ground |
| 2. | TMDS Data 2 Garkuwa | 10. | TMDS agogo + | 18. | + 5V Power |
| 3. | Bayanan TMDS 2- | 11. | Garkuwan agogo na TMDS | 19. | Gano Toshe mai zafi |
| 4. | Bayanan TMDS 1+ | 12. | Kwanan TMDS | ||
| 5. | Bayanan TMDS 1Shield | 13. | CEC | ||
| 6. | Bayanan TMDS 1- | 14. | Ajiye (NC akan na'urar) | ||
| 7. | Bayanan TMDS 0+ | 15. | SCL | ||
| 8. | TMDS Data 0 Garkuwa | 16. | SDA |
20-Cable Signal Cable Signal Cable
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | Sanyawa1 |
| 4 | ML_Lane 2 (n) | 14 | Sanyawa2 |
| 5 | GND | 15 | AUX_CH (shafi) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Gano Toshe mai zafi |
| 9 | ML_Lane 1 (p) | 19 | Koma DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
15-Cable Signal Cable Signal Cable
| Fil A'a | Sunan siginar | Fil A'a | Sunan siginar |
| 1 | Bidiyo-Ja | 9 | +5V |
| 2 | Bidiyo-Green | 10 | Kasa |
| 3 | Bidiyo-Blue | 11 | NC |
| 4 | NC | 12 | DDC-Serial data |
| 5 | Gano Cable | 13 | H-aiki tare |
| 6 | GND-R | 14 | V-sync |
| 7 | GND-G | 15 | DDC-Serial agogo |
| 8 | GND-B |
Toshe kuma Kunna
Toshe & Kunna fasalin DDC2B
Wannan saka idanu yana sanye da damar VESA DDC2B bisa ga VESA DDC STANDARD. Yana ba mai saka idanu damar sanar da tsarin runduna ainihin sa kuma, dangane da matakin DDC da aka yi amfani da shi, sadar da ƙarin bayani game da iyawar nuninsa.
DDC2B tashar bayanai ce ta gaba-gaba bisa ka'idar I2C. Mai watsa shiri na iya buƙatar bayanin EDID akan tashar DDC2B.
FAQ
- Tambaya: Menene zan yi idan dubana baya kunne?
A: Tabbatar cewa an haɗa mai saka idanu da kyau zuwa tushen wuta kuma an danna maɓallin wuta. Idan batun ya ci gaba, tuntuɓi sashin warware matsala na littafin mai amfani. - Tambaya: Zan iya tsaftace allon duba da ruwa?
A: A'a, kar a zubar da ruwa akan allon duba. Yi amfani da busasshiyar kyalle mai laushi don tsaftace allon a hankali. - Tambaya: Ta yaya zan daidaita saitunan duba?
A: Yi amfani da maɓallan da ke kan na'urar duba don samun dama ga menu na saitunan kuma yin gyare-gyare kamar yadda ake buƙata. Koma zuwa littafin mai amfani don cikakkun bayanai game da daidaita takamaiman saituna.
Takardu / Albarkatu
 |
Bayani na AOC24G2SAE [pdf] Manual mai amfani 24G2SE, 24G2SAE, 24G2SAE LCD Monitor, LCD Monitor, Monitor |
