Altronix TROVE1PH1 Trove1 W Buɗe Hanyar Baya

Bayanin samfur

Altronix Trove1PH1 da Trove2PH2 rukunoni ne waɗanda za su iya ɗaukar haɗe-haɗe daban-daban na allon Openpath tare da ko ba tare da samar da wutar lantarki na Altronix da ƙananan hukumomi don tsarin shiga ba. Trove1PH1 ya zo tare da TC1 Altronix/Openpath backplane yayin da Trove2PH2 ya zo tare da TCV2 Altronix/Openpath backplane. Dukansu sun zo da kayan hawan kaya kuma suna da girma daban-daban. Trove1PH1 yana da girma na 457mm x 368mm x 118mm yayin da Trove2PH2 yana da girma na 692.2mm x 552.5mm x 165.1mm. TC1 da TCV2 sune Altronix/Openpath backplanes waɗanda zasu iya ɗaukar nau'ikan kayan wuta daban-daban, ƙungiyoyin yanki, da allunan Openpath.

Umarnin Amfani da samfur

1. Cire jirgin baya daga shingen kafin hawa amma kar a jefar da kayan aikin.
2. Trove1PH1 (Shafi na 7)
   1. Alama kuma sanya ramuka a bango don yin layi tare da manyan ramukan maɓalli biyu a cikin wurin.
   2. Shigar da manyan haɗe-haɗe biyu da sukurori a bango tare da ɗumbin kawunan suna fitowa.
   3. Sanya ramukan maɓalli na sama sama da sukurori biyu na sama; daraja da aminci.
   4. Alama matsayi na ƙananan ramuka biyu.
   5. Cire shingen.
   6. Hana ƙananan ramuka kuma shigar da masu ɗaure biyu.
   7. Sanya maɓallan maɓalli na saman yadi a kan sukurori biyu na sama.
   8. Shigar da ƙananan sukurori guda biyu kuma tabbatar da ƙara ƙarfafa sukurori.
3. Trove2PH2 (Shafi na 8)
   1. Yi alama da ramuka a bango don yin layi tare da manyan maɓallan maɓalli uku a cikin shingen.
   2. Shigar da manyan haɗe-haɗe guda uku da sukurori a bango tare da ɗumbin kawunan suna fitowa.
   3. Sanya ramukan maɓalli na sama sama da sukurori uku na sama; daraja da aminci.
   4. Alama matsayi na ƙananan ramuka uku.
   5. Cire shingen.
   6. Hana ƙananan ramuka kuma shigar da masu ɗaure uku.
   7. Sanya ramukan maɓalli na sama sama da sukurori uku na sama.
   8. Shigar da ƙananan sukurori uku kuma tabbatar da ƙarfafa duk skru.
4. Haɗa UL da aka haɗa tamper canza (Altronix Model TS112 ko daidai) a cikin wurin da ake so, kishiyar hinge. Zamar da tampCanja madaidaicin madaidaicin gefen shingen ka tsare shi da sukurori.

Ƙarsheview

Altronix Trove1PH1 da Trove2PH2 suna ɗaukar haɗe-haɗe daban-daban na allunan Openpath tare da ko ba tare da samar da wutar lantarki na Altronix da ƙananan hukumomi don tsarin shiga ba.

Ƙayyadaddun bayanai

• 16 Auna jirgin baya da shinge tare da ample knockouts don samun dama.

Farashin 1PH1
Trove1 tare da TC1 Altronix/Openpath backplane

• Ya haɗa da: tamper switch, cam kulle, kulle goro, da kayan hawa.
• Haɗin Haɗakarwa (H x W x D): 18" x 14.5" x 4.625" (457mm x 368mm x 118mm).

Saukewa: TC1
Altronix/Openpath jirgin baya kawai

• Ya haɗa da kayan hawan kaya.
• Girma (H x W x D): 16.625" x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm).

TC1 yana ɗaukar haɗuwa da waɗannan abubuwan:

• Altronix Modules:
  • Daya (1) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB.
  • Daya (1) ACM8(CB), ACMS(CB), LINQ8ACM(CB).
  • Har zuwa biyu (2) ACM4 (CB), LINQ8PD (CB), MOM5, PD4UL (CB), PD8UL (CB), PDS8 (CB), VR6.
• Modulolin buɗe hanya:
  Daya (1) OP-ACC, daya (1) OP-16EM kuma ko dai daya (1) OP-EX-4E ko daya (1) OP-EX-8E.

Farashin 2PH2
Trove2 tare da TCV2 Altronix/Openpath backplane

• Ya haɗa da: tamper switch, cam kulle, kulle goro, da kayan hawa.
• Haɗin Haɗakarwa (H x W x D): 27.25" x 21.75" x 6.5" (692.2mm x 552.5mm x 165.1mm).

Farashin TCV2
Altronix/Openpath jirgin baya kawai

• Ya haɗa da kayan hawan kaya.
  Girma (H x W x D): 25.375" x 19.375" x 0.325" (644.5mm x 482.6mm x 8.3mm).

TCV2 yana ɗaukar haɗuwa da waɗannan abubuwan:

• Altronix Modules:
  • Biyu (2) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB.
  • Har zuwa biyu (2) ACM8 (CB), ACMS8 (CB), LINQ8ACM (CB).
  • Har zuwa biyu (2) ACM4 (CB), LINQ8PD (CB), MOM5, PD4UL (CB), PD8UL (CB), PDS8 (CB), VR6.
• Modulolin buɗe hanya:
  Biyu (2) OP-ACC, biyu (2) OP-16EM da biyu (2) OP-EX-4E ko biyu (2) OP-EX-8E.

Jerin Hukumar

• UL 294-6 bugu: Tsaron Layi I, Hare-Hare I, Jurewa IV, Tsayawar Wuta II*. * Matsayin Wutar Lantarki na tsaye I idan ba a samar da baturi ba.
• Wannan na'urar dijital ta Class B ta dace da ICES-003 na Kanada. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
• CE Turai Daidaitawa.

Umarnin shigarwa don Trove1 da Trove2

1. Cire jirgin baya daga yadi kafin hawa (kada ku jefar da kayan aiki).
2. Trove1PH1 (Shafi na 7):
   Yi alama da ramuka a bango don yin layi tare da manyan maɓallan maɓalli guda biyu a cikin shingen. Shigar da manyan haɗe-haɗe biyu da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya ramukan maɓalli na sama sama da sukurori biyu na sama; daraja da aminci. Alama matsayi na ƙananan ramuka biyu. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure biyu. Sanya ramukan maɓalli na sama sama biyu na sama. Shigar da ƙananan sukurori biyu kuma tabbatar da ƙarfafa duk skru.
   Trove2PH2 (Shafi na 8):
   Yi alama da ramuka a bango don yin layi tare da manyan maɓallan maɓalli guda uku a cikin shingen. Shigar da manyan haɗe-haɗe guda uku da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya ramukan maɓalli na sama sama da sukurori uku na sama; daraja da aminci. Alama matsayi na ƙananan ramuka uku. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure uku. Sanya ramukan maɓalli na sama sama da sukurori uku na sama. Shigar da ƙananan sukurori uku kuma tabbatar da ƙarfafa duk skru.
3. Dutsen ya haɗa da UL Listed tamper switch (Altronix Model TS112 ko daidai) a wurin da ake so, kishiyar hinge. Zamar da tampmadaidaicin madaidaicin maɓalli a gefen shingen kusan 2” daga gefen dama (Fig. 1, shafi 2). Haɗa tampcanza wayoyi zuwa shigar da Panel Control Panel ko na'urar da aka jera UL mai dacewa. Don kunna siginar ƙararrawa buɗe ƙofar kewayen.
4. Dutsen Altronix/Openpath modules zuwa TC1 ko TCV2 jirgin baya, koma shafuffuka 3, 4.

Kanfigareshan

TC1: Kanfigareshan Samar da Wutar Altronix, Ƙasashen Taro da Modulolin Buɗewa

1. Tura 5/16" kwanon rufi (wanda aka bayar) ta cikin gaba ɗaya a cikin jirgin baya wanda ya dace da ƙirar Altronix Power Supply/Caja da/ko ƙananan majalisa daga bayan jirgin baya. Mayar da sarari a kan sukurori. Ɗaure masu sarari na ƙarfe a daidai wurare don samar da ƙasa mai kyau, duba ƙasa (Fig. 2, shafi 3).
2. Dutsen alluna zuwa sararin samaniya ta amfani da 5/16" kwanon rufin kai sukurori (an bayar) (Hoto 2a, shafi 3).
3. Dutsen allunan buɗe hanyoyin da suka dace a cikin madaidaitan wurare ta hanyar sanya masu sarari da aka riga aka saka a kan ramukan da suka dace akan jirgin baya da kuma ragewa kan jirgin don amintaccen sarari zuwa jirgin baya (Hoto 2, shafi 3).
4. Ɗaure jirgin baya na TC1 zuwa shingen Trove1 ta amfani da sukurori (an samar).

Jadawalin Matsayin Mai Gudanarwa don Modulolin Buɗe Hannu masu zuwa:

Hoto 2 - Tsarin Tsarin Trove1PH1/TC1

TCV2: Kanfigarewar Altronix Power Supply, Ƙasashen Taro da Modulolin Buɗewa

1. Tura 5/16" kwanon rufi (wanda aka bayar) ta cikin gaba ɗaya a cikin jirgin baya wanda ya dace da ƙirar Altronix Power Supply/Caja(s) da/ko ƙananan majalisa daga gefen baya na jirgin baya. Mayar da sarari a kan sukurori. A ɗaure masu tazarar ƙarfe a daidai wurare don samar da ƙasa mai kyau, duba ƙasa (Fig. 3, shafi 4).
2. Dutsen alluna zuwa sararin samaniya ta amfani da 5/16" kwanon rufin kai sukurori (an bayar) (Hoto 3a, shafi 4).
3. Dutsen allunan buɗe hanyoyin da suka dace a cikin madaidaitan wurare ta hanyar sanya masu sarari da aka riga aka saka a kan ramukan da suka dace akan jirgin baya da kuma ragewa kan jirgin don amintaccen sarari zuwa jirgin baya (Hoto 3, shafi 4).
4. Ɗauki jirgin baya na TCV2 zuwa shingen Trove2 ta amfani da sukurori na kwanon rufi (an samar).

Jadawalin Matsayin Mai Gudanarwa don Modulolin Buɗe Hannu masu zuwa:

Hoto 3 - Tsarin Tsarin Trove2PH2/TCV2

Girma

Girman TC1: 16.625" x 12.5" x 0.3125" (422.3mm x 317.5mm x 7.9mm)

Trove1PH1 Maɗaukakin Ƙaruwa (H x W x D): 18" x 14.5" x 4.625" (457mm x 368mm x 118mm)

Girman TCV2: 25.375" x 19.375" x 0.325" (644.5mm x 482.6mm x 8.3mm)

Trove2PH2 Maɗaukakin Ƙaruwa (H x W x D): 27.25" x 21.75" x 6.5" (692.2mm x 552.5mm x 165.1mm)

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
web site: www.altronix.com | e-mail: info@altronix.com
IITrove1PH1 / TC1 / Trove2PH2 / TCV2

 

Takardu / Albarkatu

Altronix TROVE1PH1 Trove1 W Buɗe Hanyar Baya [pdf] Jagoran Jagora TROVE1PH1 Trove1 W Buɗaɗɗen Hanyar Baya, TROVE1PH1, Trove1 W Buɗaɗɗen Hanyar Baya, Buɗe Hanyar Baya, Jirgin Baya

Magana

• Manual mai amfani