AGROWTEK DXV4 DC Fitar Module

AGROWtEK fasaha ce da aka ƙera don taimaka muku girma. Modulolin jerin DX an tsara su musamman don hawan dogo na DIN a cikin kabad masu sarrafa lantarki. Yana da mahimmanci a lura cewa ya kamata a haɗa nau'ikan samfuran saboda ƙirar tashar da aka fallasa. A yayin da DIN dogo ba ya samuwa, maƙallan sun haɗa da ramukan hawa don hawa saman ƙasa.

Jagoran Fara Mai Sauri

DXV4

DXV4 yana da tashoshi da yawa waɗanda ke da mahimmanci a lura:

1. Common DC kasa tashoshi don haɗi
   • GND
   • GND
2. Sinking/Sourcing DC abubuwan sarrafawa don sarrafa hasken haske da sauran kayan aiki tare da siginar sarrafa analog na 0-10Vdc. Kowane tashoshi yana da ikon tuƙi har zuwa na'urori masu haske 50 (max 50mA kowace tasha.)
   • OUT1
   • OUT2
   • OUT3
   • OUT4

Haɗin kai

Yana da mahimmanci a bi umarnin don yin haɗin gwiwa:

1. Haɗa ballast korau (-) gubar dimming zuwa GND.
2. Haɗa ballast tabbatacce (+) dimming gubar zuwa ɗaya daga cikin tashoshin fitarwa guda huɗu (OUT1 - OUT 4.) Haɗin haɗi na yau da kullun don yawancin ma'auni na masana'antu ana nuna su a cikin zane-zanen da ke ƙasa.

Lokacin yin haɗin gwiwa, yana da mahimmanci a yi su tare da cire haɗin wutar lantarki daga kayan aiki kuma tare da cire haɗin RJ-45. Idan amfani da kebul na waya 6, kar a yi amfani da wayoyi na waje.

RJ-11, RJ-12
Ballasts masu amfani da RJ12 ko makamantan haɗin haɗin jack ɗin waya suna da daidaitaccen fil-fita ta amfani da tsakiya zuwa fil kamar DC- (GND) da fil biyun da ke wajen fil ɗin tsakiya kamar DC+ (0-10V).

Farashin RJ-45
Gavita ballasts da ke amfani da haɗin RJ45 suna da daidaitaccen fil-fiti ɗaya kamar masu haɗin RJ-12/14 waɗanda ke amfani da haɗin haɗin fil huɗu na tsakiya. Koyaushe tabbatar da wayoyi da polarity daidai ne bisa ga takaddun masana'anta. Tabbatar saita fitilun fitilu a cikin tsarin dimming na waje (duba littafin aiki.)

Hawan Module

DX jerin kayayyaki an tsara su don hawan dogo na DIN a cikin kabad masu sarrafa lantarki kuma yakamata a rufe su saboda ƙirar tasha da aka fallasa. Idan babu dogo na DIN, maƙallan sun haɗa da ramukan hawa don hawa saman ƙasa.

Tasha

1. Common DC kasa tashoshi don haɗi.
2. Sinking/Sourcing DC fitarwa don tuki hasken dim-ming controls da sauran kayan aiki tare da 0-10Vdc analog siginar sarrafawa. Kowane tashoshi yana da ikon tuƙi har zuwa na'urori masu haske 50 (max 50mA kowace tasha.)

Haɗin kai

1. Haɗa ballast korau (-) gubar dimming zuwa GND.
2. Haɗa ballast tabbatacce (+) dimming gubar zuwa ɗaya daga cikin tashoshin fitarwa guda huɗu (OUT1 - OUT 4.) Haɗin haɗi na yau da kullun don yawancin ma'auni na masana'antu ana nuna su a cikin zane-zanen da ke ƙasa.

SANARWA: Yi haɗi tare da katsewar wutar lantarki daga kayan gyara kuma tare da cire haɗin RJ-45.

RJ-11, RJ-12
Idan kebul na waya 6, kar a yi amfani da wayoyi na waje.

An nuna wayoyi zuwa tashar fitarwa #2.

0-10V RJ-12
Ballasts waɗanda ke amfani da RJ12 ko makamantan “waya” igiyoyin haɗin jack ɗin na'urar suna da daidaitaccen fil-fitarwa ta amfani da cibiyar zuwa fil kamar DC- (GND) da fil biyun da ke wajen fitilun tsakiya kamar DC+ (0-10V).

RJ-45
An nuna wayoyi zuwa tashar fitarwa #3.

Farashin RJ-45
Gavita ballasts da ke amfani da haɗin RJ45 suna da daidaitaccen fil-fiti ɗaya kamar masu haɗin RJ-12/14 waɗanda ke amfani da haɗin haɗin fil huɗu na tsakiya.

GARGADI: Koyaushe tabbatar da wayoyi da polarity daidai ne bisa ga takaddun masana'anta.
NOTE: Tabbatar saita fitilun fitilu a cikin tsarin dimming na waje (duba littafin aiki.)

© Agrotek Inc© A. | wgrowwwt.agek Irowtncek. | w.cwom | wT.agrowtechnologytek.como Taimaka muku girma™

Takardu / Albarkatu

AGROWTEK DXV4 DC Fitar Module [pdf] Jagorar mai amfani Module fitarwa na DXV4 DC, DXV4, Module, DXV4 Module, Module ɗin fitarwa na DC

Magana

• Manual mai amfani