An haɓaka maɓallin Aeotec don sarrafa na'urorin da aka haɗa da su Aeotec Smart Home Hub ta hanyar amfani da maɓallin jiki da mara waya. An ƙarfafa ta ta fasahar Aeotec Zigbee.

Aeotec Dole ne a yi amfani da maɓallin tare da wani Aeotec Smart Home Hub don yin aiki. Aeotec yana aiki azaman Gidan Gida mai wayo jagorar mai amfani iya zama viewed a wannan link. 

Sanar da kanku da Aeotec Button

Kunshin abun ciki:

1. Maballin Aeotec
2. Jagoran mai amfani
3. 1x CR2 baturi

Muhimman bayanan aminci.

• Karanta, kiyaye, kuma bi waɗannan umarnin. Ku kula da duk gargaɗin.
• Tsaftace kawai da bushe bushe.
• Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) waɗanda ke samar da ji.
• Yi amfani kawai da haɗe -haɗe da na'urorin haɗi da Mai ƙera ya ƙayyade

Haɗa maɓallin Aeotec

Bidiyo.

Matakai a Haɗin SmartThings.

1. Daga Fuskar allo, matsa Ikon ƙara (+). kuma zaɓi Na'ura.
2. Zaɓi Aeotec kuma Nesa/Button.
3. Taɓa Fara.
4. Zabi a Hub don na'urar.
5. Zabi a Daki don na'urar kuma matsa Na gaba.
6. Yayin da Hub ke bincike:
   • Jawo "Cire lokacin Haɗawa”Shafin da aka samo a cikin firikwensin.
   • Duba lambar a bayan na'urar.

Button Aeotec

Maɓallin Aeotec yana goyan bayan maɓallan maɓalli guda 3 waɗanda za a iya amfani da su a cikin Automation a cikin Aeotec Smart Home hub. Kuna iya yin programme Aeotec maɓallin ko dai daga (1) Aeotec Button interface, (2) Automation na Musamman (don koyon yadda ake tsara Automation Custom, danna kan hanyar haɗin yanar gizon), ko SmartApps kamar (3) WebCORE. 

Wannan sashe zaiyi bayani kan yadda ake shirin (1) Aeotec Button dubawa.

Matakai a Abubuwan wayo Haɗa.

1. Daga Fuskar allo, gungura ƙasa zuwa naku Aeotec Button kuma danna widget din ta.
2. Nemo zaɓuɓɓukan latsa maɓallin 3 kuma danna kowane ɗayan su don tsara su.
   • Latsa Singleaya (An matsa)
   • Biyu matsa lamba
   • An gudanar
3. A ƙarƙashin “Sannan”, matsa Ikon ƙara (+)..
4. Zaɓi ɗaya daga cikin zaɓuɓɓuka 2
   • Na'urorin sarrafawa
     1. Zaɓi duk na'urorin da kuke son sarrafawa
     2. Taɓa Na gaba
     3. Taɓa kan kowace na’urar da kake son canza martanin.
   • Gudu Sceles
     1. Zaɓi duk al'amuran da kuke so wannan maɓallin danna don gudu.
5. Taɓa Anyi
6. Gwada ikon sarrafa maɓallin ku ta latsa maɓallin Aeotec Maɓalli.

Factory sake saita Aeotec Button

Aeotec maɓallin na iya zama sake saita masana'anta a kowane lokaci idan kun haɗu da kowane lamuran, ko kuma idan kuna buƙatar sake haɗa Aeotec Button zuwa wata cibiya.

Bidiyo.

Matakai a Abubuwan wayo Haɗa.

1. Latsa ka riƙe maɓallin haɗin da aka ajiye na daƙiƙa biyar (5).
2. Saki maɓallin lokacin da LED ya fara ƙyalƙyali ja.
3. LED ɗin zai lumshe ja da kore yayin ƙoƙarin haɗi.
4. Yi amfani da ƙa'idodin Smartthings da matakai dalla -dalla a cikin "Haɗa maɓallin Aeotec" a sama.

Kusa da: Aeotec Ƙarin bayani na fasaha