AC Current Probe
Bayani na MN213
Manual mai amfani
BAYANI
MN213 (Cat. #2115.75) shine sabon abu a cikin ƙaramin binciken AC na yanzu. An ƙera shi don biyan mafi tsananin buƙatu a cikin masana'antu da kwangilar lantarki, ya kuma cika sabbin ƙa'idodin aminci da aiki. Binciken yana da kewayon ma'auni har zuwa 240Arms wanda ya sa ya zama cikakkiyar kayan aiki don aunawa tare da DMMs, masu rikodin, iko da mita masu jituwa. Model MN213 ya dace da kowane AC ammeter, multimeter, ko wani kayan auna na yanzu tare da abin shigar da ƙasa da 1Ω. Don cimma daidaiton da aka bayyana, yi amfani da MN213 tare da ammeter da ke da daidaiton 0.75% ko mafi kyau.
GARGADI
An ba da gargaɗin aminci don tabbatar da amincin ma'aikata da ingantaccen aiki na kayan aiki. Karanta umarnin gaba daya.
- Yi hankali akan kowace da'ira: mai yuwuwar babban voltages da igiyoyin ruwa na iya kasancewa kuma suna iya haifar da haɗari.
- Kada kayi amfani da binciken idan ya lalace. Koyaushe haɗa binciken na yanzu zuwa na'urar aunawa kafin a haɗa shi a kusa da madugu
- Kar a yi amfani da madugu marasa rufi tare da yuwuwar zuwa ƙasa sama da 600V CAT III gurɓataccen gurɓataccen abu 2. Yi amfani da taka tsantsan lokacin clampkewaye da babur madugu ko sanduna bas.
- Kafin kowane amfani, duba binciken; nemi fasa a cikin gidaje ko fitarwa na USB.
- Kada kayi amfani da clamp a cikin rigar muhalli ko a wuraren da iskar gas ke da haɗari.
- Kada ku yi amfani da binciken a ko'ina fiye da shingen taɓawa.
ALAMOMIN LANTARKI NA DUNIYA
Wannan alamar tana nuna cewa binciken na yanzu yana da kariya ta hanyar rufewa biyu ko ƙarfafawa. Yi amfani da ƙayyadaddun ɓangarorin maye gurbin masana'anta lokacin yin hidimar kayan aiki.
Wannan alamar tana nuna HANKALI! da buƙatun cewa mai amfani ya koma ga littafin mai amfani kafin amfani da kayan aiki.
Wannan nau'in firikwensin A halin yanzu. Wannan alamar tana nuna cewa an ba da izinin aikace-aikacen kewaye da cirewa daga masu gudanarwa masu haɗari LIVE.
MA'ANAR KASUWAN AUNA
CAT II: Don ma'auni da aka yi akan ma'aunin da aka haɗa kai tsaye zuwa tsarin rarraba wutar lantarki. Examples shine ma'auni akan kayan aikin gida ko kayan aikin hannu.
CAT III: Don ma'auni da aka yi a cikin ginin ginin a matakin rarraba kamar a kan kayan aiki mai wuyar gaske a cikin ƙayyadaddun shigarwa da masu rarraba kewaye.
CAT IV: Don ma'auni da aka yi a farkon samar da wutar lantarki (<1000V) kamar kan na'urorin kariya na farko, na'urorin sarrafa ripple, ko mita.
KARBAR KAYANKI
Bayan karɓar jigilar kaya, tabbatar da cewa abubuwan da ke ciki sun yi daidai da lissafin tattarawa. Sanar da mai rarraba ku duk wani abu da ya ɓace. Idan kayan aikin ya bayyana sun lalace, file da'awar nan da nan tare da mai ɗauka kuma sanar da mai rarraba ku a lokaci ɗaya, ba da cikakken bayanin kowane lalacewa.
BAYANIN LANTARKI
Kewayen Yanzu: 50mA zuwa 100AAC, ci gaba
Siginar fitarwa: 1mAAC/AAC (150mA @ 150A)
Daidaito*:
50mA zuwa 100A: 1% ± 0.05A (tare da kaya mara amfani)
Canja wuri: N/A (* Sharuɗɗan Magana: 23 ° C ± 3 ° K, 20 zuwa 70% RH, filin maganadisu na waje <40 A/m, 48 zuwa 65Hz sine wave, babu bangaren DC, babu madugun ɗaukar halin yanzu na waje, gwajin sample tsakiya.) Load impedance 1Ω.
Juyawa: 150A ci gaba
Range akai: 48 zuwa 65Hz
Ƙunƙarar Load: 5Ω max
Aikin Voltage: 300V a kan insulated madugu
Yanayin gama gari Voltage: 100VAC Cat. III
BAYANIN MICHANICAL
Yanayin Aiki: -13° zuwa 122°F (-25° zuwa 50°C)
Ajiya Zazzabi: -40° zuwa 176°F (-40° zuwa 80°C)
Matsakaicin Diamita na Kebul: 0.43” Ø max. (11mm)
Girma: 1.4 x 4.53 x 0.87" (36 x 115 x 22mm)
Nauyin: 160g (6 oz)
Launuka: Hannun launin toka mai duhu tare da murfin ja
Polycarbonate Material:
Hannu: 10% Fiberglass cajin polycarbonate UL 94 V0
Fitowa: Guda 5 ft (1.5m) mai guba tare da amintaccen filogin ayaba 4mm
BAYANIN TSIRA
Kayan lantarki:
300V aiki voltage a kan insulated madugu 100V max na kowa yanayi tsakanin fitarwa da ƙasa, Cat. III
Dielectric 3kV 50/60Hz na 1mn
BAYANIN BAYANI
AC Current Probe MN123………Cat #2129.12
Na'urorin haɗi:
Adaftar filogi na ayaba (zuwa toshewar da ba a daɗe ba) …………………………Cat #1017.45
AIKI
Yin Ma'auni tare da Model na Binciken AC na yanzu MN123
- Haɗa tashoshi baƙi (S2) da ja (S1) zuwa kewayon 200mA na DMM ko kayan aikin ku. MN123 yana da rabon 1000:1. Wannan yana nufin cewa don 100AAC a cikin madubin da ke kewaye da binciken shine clamped, 100mAAC zai fito daga binciken yana kaiwa DMM ko kayan aikin ku. Abin da ake fitarwa shine 1mAAC kowace Amp. Zaɓi kewayo akan DMM ɗinku ko kayan aikin da ya fi dacewa da auna halin yanzu. Idan girman ba a san shi ba, fara da mafi girman kewayon (200mAAC) sannan yi aiki ƙasa har sai an kai iyakar da ta dace da ƙuduri. Clamp bincike a kusa da madugu. Ɗauki karatun akan mita kuma ninka shi da 1000 don samun ma'aunin da aka auna (misali, 59mA karatun: 59 x 1000 = 59,000mA ko 59A).
- Don ingantacciyar daidaito, guje wa idan zai yiwu, kusancin wasu madugu waɗanda na iya haifar da hayaniya.
Nasihu don Yin Ma'auni Madaidaici
- Lokacin amfani da bincike na yanzu tare da mita, yana da mahimmanci don zaɓar kewayon da ke ba da mafi kyawun ƙuduri. Rashin yin hakan na iya haifar da kurakuran aunawa.
- Tabbatar cewa wuraren binciken muƙamuƙi ba su da ƙura da gurɓatawa. Abubuwan gurɓatawa suna haifar da raƙuman iska a tsakanin jaws, ƙara yawan canjin lokaci tsakanin firamare da sakandare. Yana da matukar mahimmanci don auna wutar lantarki.
KIYAWA
Gargadi
- Don kiyayewa yi amfani da sassa na maye gurbin masana'anta kawai.
- Don guje wa girgiza wutar lantarki, kar a yi ƙoƙarin yin kowane sabis sai dai idan kun cancanci yin hakan.
- Don gujewa girgiza wutar lantarki da/ko lalata kayan aiki, kar a sami ruwa ko wasu wakilai na waje a cikin binciken.
Tsaftacewa
Don tabbatar da ingantaccen aiki, yana da mahimmanci a kiyaye wuraren binciken muƙamuƙi mai tsabta a kowane lokaci.
Rashin yin hakan na iya haifar da kuskure a cikin karatu. Don tsaftace muƙamuƙi na bincike, yi amfani da takarda yashi mai kyau sosai (mai kyau 600) don guje wa taƙasa muƙamuƙi, sannan a hankali a tsaftace tare da zane mai laushi mai laushi.
GYARA DA KYAUTA
Dole ne ku tuntuɓi Cibiyar Sabis ɗinmu don lambar Izinin Sabis na Abokin Ciniki (CSA#). Wannan zai tabbatar da cewa lokacin da kayan aikin ku ya zo, za a bi diddigin su kuma a sarrafa su da sauri. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Idan an dawo da kayan aikin don daidaitawa, muna buƙatar sanin idan kuna son daidaitaccen gyare-gyare, ko abin da za a iya ganowa zuwa NIST (ya haɗa da takardar shaidar daidaitawa da bayanan daidaitawa da aka yi rikodi).
Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive • Dover, NH 03820 USA
Tel: 800-945-2362 (Fitowa ta 360)
603-749-6434 (Fitowa ta 360)
Fax: 603-742-2346 or 603-749-6309
gyara@aemc.com
(Ko tuntuɓi mai rarraba ku mai izini)
Ana samun farashi don gyarawa, daidaitaccen daidaitawa, da daidaitawa da ake iya ganowa ga NIST.
NOTE: Duk abokan ciniki dole ne su sami CSA# kafin su dawo da kowane kayan aiki.
TAIMAKON FASAHA DA SALLAH
Idan kuna fuskantar kowace matsala ta fasaha, ko buƙatar kowane taimako tare da ingantaccen amfani ko aikace-aikacen wannan kayan aikin, da fatan za a kira layin fasahar mu:
800-343-1391
508-698-2115
Fax 508-698-2118
Chauvin Arnoux®, Inc. dba AEMC® Instruments techsupport@aemc.com
www.aemc.com
99-MAN 100315.v1 09/06
Takardu / Albarkatu
 |
AEMC INSTRUMENTS MN213 AC Binciken Yanzu [pdf] Manual mai amfani MN213, MN213 AC Binciken Yanzu, Binciken AC na yanzu, Binciken Yanzu, Bincike |
 |
AEMC INSTRUMENTS MN213 AC Binciken Yanzu [pdf] Manual mai amfani MN213 AC Binciken Yanzu, MN213, AC Binciken Yanzu, Binciken Yanzu, Bincike |