ADATA AMD NVMe RAID Yayi Bayani kuma An gwada shi

AMD BIOS RAID Jagorar Shigarwa

Hotunan hotunan kariyar kwamfuta na BIOS a cikin wannan jagorar don tunani ne kawai kuma suna iya bambanta da ainihin saiti na uwa-uba. Zaɓuɓɓukan saiti na ainihi da za ku gani za su dogara da motherboard ɗin da kuka saya. Da fatan za a koma zuwa shafin ƙayyadaddun samfur na samfurin da kuke amfani da shi don bayani kan tallafin RAID. Domin ana iya sabunta ƙayyadaddun bayanai na motherboard da software na BIOS, abubuwan da ke cikin wannan takaddun za su iya canzawa ba tare da sanarwa ba.

AMD BIOS RAID Jagorar Shigarwa umarni ne a gare ku don saita ayyukan RAID ta amfani da mai amfani FastBuild BIOS a ƙarƙashin yanayin BIOS. Bayan kun yi faifan direba na SATA, danna [F2] ko [Del] don shigar da saitin BIOS don saita zaɓi zuwa yanayin RAID ta bin cikakken umarnin “Manual User” a cikin CD ɗin tallafinmu, sannan zaku iya fara amfani da onboard RAID Option ROM Utility don saita RAID.

Gabatarwa zuwa RAID
Kalmar “RAID” tana nufin “Redundant Array of Independent Disks”, wacce hanya ce ta haɗa manyan faifai biyu ko fiye zuwa naúrar ma’ana guda ɗaya. Don ingantacciyar aiki, da fatan za a shigar da fayafai iri ɗaya na ƙira ɗaya da ƙarfi yayin ƙirƙirar saitin RAID.

RAID 0 (Tsarin Bayanan)
RAID 0 ana kiranta ɗigon bayanai wanda ke haɓaka rumbun kwamfutoci iri ɗaya guda biyu don karantawa da rubuta bayanai a layi daya, tari. Zai inganta samun damar bayanai da adanawa tun da zai ninka yawan kuɗin canja wurin bayanai na faifai guda ɗaya kaɗai yayin da rumbun kwamfyuta guda biyu ke yin aiki iri ɗaya kamar tuƙi ɗaya amma a ci gaba da canja wurin bayanai.

GARGADI
Kodayake aikin RAID 0 na iya inganta aikin samun dama, baya bayar da kowane haƙuri mara laifi. HotPlug kowane HDD na RAID 0 Disk zai haifar da lalacewar bayanai ko asarar bayanai.

RAID 1 (Data Mirroring)
RAID 1 ana kiranta da madubi na bayanai wanda ke kwafi da kiyaye hoto iri ɗaya na bayanai daga tuƙi ɗaya zuwa na biyu. Yana ba da kariya ga bayanai kuma yana ƙara haƙuri ga tsarin gabaɗaya tunda software na sarrafa kayan aikin diski zai jagoranci duk aikace-aikacen zuwa injin da ke tsira saboda yana ɗauke da cikakken kwafin bayanan da ke cikin ɗayan faifan idan ɗayan ya gaza.

RAID 5 (Block Striping tare da Rarraba Rarraba)
RAID 5 yana ratsi bayanai kuma yana rarraba bayanan daidaito a cikin faifai na zahiri tare da tubalan bayanan. Wannan ƙungiyar tana haɓaka aiki ta hanyar samun damar tuƙi na zahiri da yawa a lokaci guda don kowane aiki, da kuma haƙurin kuskure ta hanyar samar da bayanan daidaito. A cikin yanayin gazawar tuƙi ta zahiri, za a iya sake ƙididdige bayanai ta tsarin RAID dangane da ragowar bayanan da bayanin daidaito. RAID 5 yana yin ingantaccen amfani da rumbun kwamfyuta kuma shine mafi girman matakin RAID. Yana aiki da kyau don file, database, aikace-aikace da web sabobin.

RAID 10 (Stripe Mirroring)
RAID 0 za a iya madubi ta amfani da dabarun RAID 1, yana haifar da mafita na RAID 10 don ingantaccen aiki tare da juriya. Mai sarrafawa ya haɗu da aikin ɗigon bayanai (RAID 0) da rashin haƙuri na madubi na diski (RAID 1). An ɗora bayanai a kan faifai da yawa kuma ana kwafi su akan wani sashe na faifai.

RAID Kanfigareshan Kariya

1. Da fatan za a yi amfani da sabbin fayafai guda biyu idan kuna ƙirƙirar tsararrun RAID 0 (tsitsi) don yin aiki. Ana ba da shawarar yin amfani da injin SATA guda biyu masu girman iri ɗaya. Idan kun yi amfani da faifai guda biyu masu girma dabam dabam, ƙaramin faifai mai ƙarfi zai zama girman ma'auni na kowane tuƙi. Domin misaliampTo, idan hard disk guda daya yana da karfin 80GB, daya kuma yana da 60GB, iyakar karfin 80GB-drive zai zama 60GB, kuma yawan karfin wannan RAID 0 set shine 120GB.
2. Kuna iya amfani da sabbin tukwici guda biyu, ko amfani da faifan da ke akwai da sabon faifai don ƙirƙirar tsararrun RAID 1 (mirroring) don kariyar bayanai (dole ne sabon injin ɗin ya kasance girmansa ɗaya ko ya fi girma fiye da na yanzu). Idan kun yi amfani da fayafai guda biyu masu girma dabam dabam, ƙaramin faifan ƙarfi zai zama girman ma'ajiyar tushe. Don misaliampDon haka, idan hard disk ɗaya yana da ƙarfin 80GB kuma ɗayan yana da 60GB, matsakaicin ƙarfin ajiya na RAID 1 set shine 60GB.
3. Da fatan za a tabbatar da matsayin rumbun kwamfutarka kafin kafa sabuwar tsararrun RAID ɗin ku. GARGADI!! Da fatan za a yi ajiyar bayanan ku da farko kafin ƙirƙirar ayyukan RAID. A cikin tsarin da kuka ƙirƙiri RAID, tsarin zai tambayi idan kuna son "Clear Data Disk" ko a'a. Ana ba da shawarar zaɓar "Ee", sannan ginin bayanan ku na gaba zai yi aiki a ƙarƙashin yanayi mai tsabta.

UEFI RAID Kanfigareshan
Kafa tsarin RAID ta amfani da UEFI Setup Utility da shigar da Windows

Mataki 1: Saita UEFI kuma ƙirƙirar tsararrun RAID

1. Yayin da tsarin ke yin booting, danna maɓallin [F2] ko [Del] don shigar da kayan aikin saitin UEFI.
2. Jeka Kanfigareshan Tsare-tsare.
3. Saita "SATA Yanayin" zuwa .
4. Je zuwa AdvancedAMD PBSAMD Common Platform Module kuma saita "Yanayin RAID NVMe" zuwa .
5. Danna [F10] don ajiye canje-canjenku kuma fita, sannan ku sake shigar da Saitin UEFI.
6. Bayan adana saitunan da aka canza a baya ta hanyar [F10] da sake kunna tsarin, ƙaramin menu na "RAIDXpert2 Kanfigareshan Utility" yana samuwa.
7. Jeka zuwa AdvancedRAIDXpert2 Kanfigareshan UtilityArray Management, sannan kuma share tsararrun faifai da ke akwai kafin ƙirƙirar sabon tsararru. Ko da ba ka saita kowane tsararrun RAID ba tukuna, ƙila ka fara amfani da “Share Array” da farko.
8. Je zuwa AdvancedRAIDXpert2 Kanfigareshan UtilityArray Gudanar da Ƙirƙiri Array
   9A. Zaɓi "Matakin RAID" 9B. Zaɓi "Zaɓi faifan Jiki".
   9C. Canja "Zaɓi Nau'in Mai jarida" zuwa "SSD" ko barin "BIYU".
   9D. Zaɓi "Duba Duk" ko kunna takamaiman fayafai waɗanda kuke son amfani da su a cikin tsararru. Sannan zaɓi “Aiwatar
   9E. Zaɓi "Ƙirƙiri Array".
9.  Danna [F10] don ajiyewa don fita. * Lura cewa hotunan kariyar UEFI da aka nuna a cikin wannan jagorar shigarwa don tunani ne kawai. Da fatan za a koma zuwa ASRock's webshafin don cikakkun bayanai game da kowane samfurin. https://www.asrock.com/index.asp

Mataki 2: Zazzage direba daga ASRock's website
A. Da fatan za a sauke direban "SATA Floppy Image" daga ASRock's webshafin (https://www.asrock.com/index.asp) da kuma cire zip din file zuwa kebul na flash ɗin ku. A al'ada kuma zaka iya amfani da direban RAID da aka bayar ta hanyar AMD website.

Mataki 3: Shigar da Windows
Saka kebul na USB tare da shigarwa Windows 11 files. Sa'an nan kuma sake kunna tsarin. Yayin da tsarin ke yin booting, da fatan za a danna [F11] don buɗe menu na taya da aka nuna a wannan hoton. Ya kamata ya jera kebul na USB azaman na'urar UEFI. Da fatan za a zaɓi wannan don taya daga. Idan tsarin ya sake farawa a wannan lokacin, to da fatan za a sake buɗe menu na taya [F11].

1. Lokacin da shafin zaɓin diski ya bayyana yayin aiwatar da shigarwar Windows, da fatan za a danna . Kada ku yi ƙoƙarin sharewa ko ƙirƙirar kowane bangare a wannan lokacin.
2. Danna don nemo direba a kan kebul na flash ɗin ku. Dole ne a loda direbobi uku. Wannan shi ne na farko. Sunayen babban fayil na iya bambanta dangane da fakitin direban da kuke amfani da su.
3. Zaɓi "AMD-RAID Bottom Device" sannan danna .
4. Load da direba na biyu.
5. Zaɓi "AMD-RAID Controller" sannan danna .
6. Load da direba na uku.
7. Zaɓi "AMD-RAID Config Device" sannan danna .
8. Da zarar direba na uku ya loda, RAID faifai ya bayyana. Zaɓi sarari mara izini sannan danna .
9. Da fatan za a bi umarnin shigarwa na Windows don gama aikin.
10. Bayan an gama shigarwar Windows, da fatan za a shigar da direbobi daga ASRock's website. https://www.asrock.com/index.asp
11. Je zuwa menu na Boot kuma saita "Zaɓin Boot #1" zuwa .

AMD Windows RAID Jagoran Shigarwa

Tsanaki:
Wannan babin yana bayyana yadda ake saita ƙarar RAID a ƙarƙashin Windows. Kuna iya amfani da shi don yanayin yanayi masu zuwa:

1. An shigar da Windows akan 2.5 ″ ko 3.5 ″ SATA SSD ko HDD. Kuna son saita ƙarar RAID tare da NVMe M.2 SSDs.
2. An shigar da Windows akan NVMe M.2 SSD. Kuna son saita ƙarar RAID tare da 2.5 ″ ko 3.5 ″ SATA SSDs ko HDDs.

Ƙirƙiri ƙarar RAID a ƙarƙashin Windows

1. Shigar da UEFI Setup Utility ta latsa ko kai tsaye bayan kun kunna kwamfutar.
2. Saita "SATA Mode" zaɓi zuwa . (Idan kana amfani da NVMe SSDs don daidaitawar RAID, da fatan za a tsallake wannan matakin)
3. Je zuwa AdvancedAMD PBSAMD Common Platform Module kuma saita "Yanayin RAID NVMe" zuwa . (Idan kana amfani da 2.5 ″ ko 3.5 ″ SATA tafiyarwa don daidaitawar RAID, da fatan za a tsallake wannan matakin)
4. Danna "F10" don ajiye saitin kuma sake yi zuwa Windows.
5. Shigar da "AMD RAID Installer" daga AMD website: https://www.amd.com/en/support Zaɓi "Cibiyoyin Chipset", zaɓi soket da chipset, kuma danna "Submitaddamar". Da fatan za a nemo "AMD RAID Installer".
6. Bayan shigar da "AMD RAID Installer", da fatan za a kaddamar da "RAIDXpert2" a matsayin mai gudanarwa.
7. Nemo "Array" a cikin menu kuma danna "Create".
8. Zaɓi nau'in RAID, faifan diski waɗanda za su so a yi amfani da su don RAID, ƙarfin ƙara sannan kuma ƙirƙirar tsararrun RAID.
9. A cikin Windows, buɗe "Gudanar da Disk". Za a sa ka fara fara faifan. Da fatan za a zaɓi "GPT" kuma danna "Ok".
10. Danna dama a sashin "Ba a raba" na faifai kuma ƙirƙirar sabon ƙara mai sauƙi.
11. Bi "Sabon Sauƙaƙe Mayen Ƙarar Ƙara" don ƙirƙirar sabon ƙara.
12. Jira kaɗan don tsarin don ƙirƙirar ƙarar.
13. Bayan ƙirƙirar ƙarar, RAID yana samuwa don amfani.

Share tsararrun RAID a ƙarƙashin Windows.

1. Zaɓi tsararrun da kuke son gogewa.
2. Nemo "Array" a cikin menu kuma danna "Share".
3. Danna "Ee" don tabbatarwa.

Takardu / Albarkatu

ADATA AMD NVMe RAID Yayi Bayani kuma An gwada shi [pdf] Jagoran Shigarwa AMD NVMe RAID Yayi Bayani da Gwaji, RAID Yayi Bayani da Gwaji, Bayyanawa da Gwaji, Gwaji

Magana

• Manual mai amfani