ACCU-SCOPE 3000-LED 2x Makasudi da Ƙarin Diffuser

Bayanin samfur

2x Manufar & Diffuser Supplement an tsara shi don amfani tare da 3000-LED da EXC-350 Microscope Series. Ya ƙunshi abubuwa guda biyu: faifan mai watsawa (CAT # 00-3222-2X) da maƙasudin 2x (CAT # 00-3172-PL). Lura cewa ana siyar da waɗannan abubuwan haɗin gwiwa daban.

Ana ba da shawarar faifan mai watsawa don amfani tare da manufar 2x don samar da ko da haske na samfuri a duk faɗin filin. view. Za'a iya shigar da darjewa cikin sauƙi a cikin ramin faifan tacewa na Abbe condenser, wanda aka samar da 3000LED da EXC-350 microscope.

Umarnin Amfani da samfur

1. Fara da shigar da makasudin 2x a cikin guntun hanci na microscope. Sanya shi a cikin buɗaɗɗen matsayi kusa da manufar 4x.
2. Juya manufar 2x zuwa hanyar haske.
3. Cire madaidaicin madaidaicin daga ramin na'ura.
4. Zamar da ɗimbin ɗimbin ɗimbin ɗimbin ɗimbin ɗimbin ɗimbin ɗimbin ɗimbin yawa a cikin ramin faifan na'urar tacewa daga gefen dama zuwa gefen hagu. Tabbatar cewa rubutun da ke kan faifan yana fuskantar sama, kuma riƙon yana kan dama.
5. Lokacin amfani da maƙasudin 2x don kallo, zamewa mai watsawa mai watsawa har zuwa ciki don sanya mai watsawa a cikin haske. Za ku ji tabbatacce detent a kan darjewa, wanda zai taimake ka sami daidai matsayi.
6. Don kallo tare da 4x da maƙasudai mafi girma, zaku iya cire faifan mai watsawa kaɗan har sai buɗaɗɗen matsayi yana cikin hanyar haske. Bugu da ƙari, abin rufe fuska a kan faifai zai taimaka maka wajen nemo madaidaicin matsayi. Lura cewa faifan ba ya buƙatar cirewa yayin yawancin abubuwan dubawa amma ana iya cire shi cikin sauƙi kuma a sake shigar da shi idan ya cancanta.

2x Makasudin & Kariyar Diffuser

Don 3000-LED da EXC-350 Microscope Series

shigarwa & Operation

Abubuwan da aka gyara

Ana ba da shawarar mai watsawa mai watsawa ❶ (CAT # 00-3222-2X) don amfani tare da manufar 2x ❷ (CAT #00-3172-PL) don 3000-LED da EXC-350 microscope jerin. Ana siyar da madaidaicin mai watsawa da makasudin 2x daban.
Mai watsa shirye-shiryen yana taimakawa don samar da hasken samfur ko da a duk faɗin filin view.
Slider diffuser ta zame cikin ramin faifan faifan tacewa na Abbe condenser ❸. An samar da na'urar daukar hoto tare da 3000-LED da EXC-350 microscope.

Slider blank (ja kibiya) da aka nuna saka a cikin matattarar faifan maƙiyi 3000-LED.

Cire Slider blank (jan kibiya) daga ramin madaidaicin maƙalli na EXC-350.

Shigarwa & Aiki

Shigar da manufar 2x a cikin guntun hanci, yawanci a cikin buɗaɗɗen matsayi kusa da manufar 4x.
Zaɓi makasudin 10x kuma aiwatar da hasken Köhler kamar yadda aka bayyana a cikin jagorar da ta zo tare da microscope. Bude diaphragm filin gaba daya.
Juya manufar 2x zuwa hanyar haske.
Cire madaidaicin madaidaicin ❹ daga ramin na'urar.

Zamar da madaidaicin mai watsawa zuwa cikin madaidaicin madaidaicin ramin tacewa daga gefen dama zuwa gefen hagu. Rubutun ya kamata ya tashi, kuma hannun dama.
Lokacin amfani da maƙasudin 2x don kallo, zamewa mai watsawa mai watsawa har zuwa ciki don sanya mai watsawa a cikin haske. Ƙaƙwalwar ƙira mai kyau akan faifai zai taimaka don nemo matsayin "a".
Lokacin amfani da 4x da maƙasudai mafi girma, za a iya fitar da silsilar mai watsawa a wani yanki har sai buɗaɗɗen matsayi ya kasance a cikin haske. A detent a kan darjewa zai taimaka wajen nemo "fita" matsayi. Ba ya buƙatar cire madaidaicin yayin yawancin abubuwan dubawa amma ana cire shi cikin sauƙi kuma a sake shigar da shi kamar yadda ya cancanta.

73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • info@accu-scope.com • www.accu-scope.com

Takardu / Albarkatu

ACCU-SCOPE 3000-LED 2x Makasudi da Ƙarin Diffuser [pdf] Jagoran Jagora 3000-LED 2x Maƙasudi da Ƙarin Diffuser, 3000-LED, 2x Makasudi da Ƙarin Diffuser

Magana

• Manual mai amfani