An ƙera Aeotec Multipurpose Sensor don gano buɗe/kusasshen kofa/taga, zafin jiki, da rawar jiki yayin da ake haɗa shi zuwa. Aeotec Smart Home Hub. An ƙarfafa ta ta fasahar Aeotec Zigbee.

Dole ne a yi amfani da Sensor Multipurpose Aeotec tare da Aeotec Smart Home Hub don yin aiki. Aeotec yana aiki azaman Gidan Gidan Smart jagorar mai amfani iya zama viewed a wannan link. 

---

Sanar da kanka da firikwensin Aeotec Multipurpose

Kunshin abun ciki:

1. Na'urar haska bayanai da yawa ta Aeotec
2. Jagoran mai amfani
3. Jagoran lafiya da aminci
4. Dutsen kwallon Magnetic
5. 3M m tube
6. 1x CR2032 baturi

Muhimman bayanan aminci.

• Karanta, kiyaye, kuma bi waɗannan umarnin. Ku kula da duk gargaɗin.
• Tsaftace kawai da bushe bushe.
• Kada a shigar kusa da kowane tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) waɗanda ke samar da ji.
• Yi amfani kawai da haɗe-haɗe da kayan haɗi wanda Maƙerin ya bayyana.

---

Haɗa firikwensin Multipurpose na Aeotec

Bidiyo.

Matakai a Haɗin SmartThings.

1. Daga Fuskar allo, matsa Ikon ƙara (+). kuma zaɓi Na'ura.
2. Zaɓi Aeotec sai me Na'urar firikwensin abubuwa da yawa (IM6001-MPP).
3. Taɓa Fara.
4. Zabi a Hub don na'urar.
5. Zabi a Daki don na'urar kuma matsa Na gaba.
6. Yayin da Hub ke bincike:
   • Jawo "Cire lokacin Haɗawa”Shafin da aka samo a cikin firikwensin.
   • Duba lambar a bayan na'urar.
     

---

Amfani da firikwensin Aeotec Multipurpose

Sensor na Aeotec Multipurpose yanzu wani bangare ne na cibiyar sadarwar ka ta Aeotec Smart Home Hub. Zai bayyana azaman widget na Buɗewa / Kusa wanda zai iya nuna halin buɗewa / rufewa ko karatun firikwensin zafin jiki. 

Wannan sashe zai wuce yadda ake nuna duk bayanai a cikin SmartThings Connect app ɗin ku.

Matakai a Haɗin SmartThings.

1. Bude SmartThings Haɗa
2. Gungura zuwa ƙasa Na'urar haska bayanai da yawa ta Aeotec
3. Sannan matsa Aeotec Multipurpose Sensor widget.
4. A wannan allon, yakamata ya nuna:

Kuna iya amfani da Maɓallin Buɗewa / Kusa da Zazzabi a cikin Aikin kai don sarrafa cibiyar sadarwar gidan ku na Aeotec Smart Home Hub. Don ƙarin koyo game da shirye -shirye sarrafa kansa, bi wannan mahadar.

---

Yadda za a cire firikwensin Aeotec Multipurpose daga Aeotec Smart Home Hub

Idan Sensor din Multipurpose na Aeotec dinka baya yin yadda kake tsammani, da alama kana bukatar sake saita Sensor dinka na Multipurpose kuma cire shi daga Aeotec Smart Home Hub don fara sabon farawa.

Matakai

1. Daga Fuskar allo, zaɓi Menu 

2. Zaɓi Ƙarin Zabuka (3 Dot icon)

3. Taɓa Gyara

4. Taɓa Share don tabbatarwa

---

Masana'antar ta sake saita Sensor din Multipurpose na Aeotec

Sensor na Aeotec Multipurpose zai iya zama sake saita ma'aikata a kowane lokaci idan kun ci karo da wata matsala, ko kuma idan kuna buƙatar sake Sensor Multipurpose Aeotec zuwa wani cibiya.

Bidiyo.

Matakai a Haɗin SmartThings.

1. Latsa ka riƙe maɓallin haɗin da aka ajiye na daƙiƙa biyar (5).
2. Saki maɓallin lokacin da LED ya fara ƙyalƙyali ja.
3. LED ɗin zai lumshe ja da kore yayin ƙoƙarin haɗi.
4. Yi amfani da aikace-aikacen SmartThings da matakan daki-daki a “Haɗa firikwensin Aeotec Multipurpose” a sama.

Kusa da: Bayanin fasaha na Aeotec Multipurpose Sensor