ES Controller
“
Specifications:
- Model: ES
- USB-C Port: For charging & wired connection
- Indicator Light:
- Orange – Charging
- Green – Fully charged
- Flashing light – Pairing mode
- Solid White – No custom settings configured
- Solid Blue – Custom settings configured
- Home Button: Press to power on, Press and hold to power
off - Pairing Button: Press and hold to enter pairing mode, Slide
switch to change controller mode - Power-Off Button: Controller will automatically power off after
15 minutes of inactivity
Product Usage Instructions:
Charging & Connection:
Use the USB-C port for both charging and wired connection. The
indicator light will show different colors to indicate various
states such as charging, fully charged, pairing mode, and custom
settings configured.
Power On/Off:
To power on the controller, press the Home button. To power off,
press and hold the Home button.
Pairing:
To enter pairing mode, press and hold the Pairing button. Slide
the switch to change controller mode. Follow specific pairing
methods based on the device you are connecting to (PC, Android,
Switch/Switch 2).
Joysticks Calibration:
To calibrate joysticks, press and hold the L, R, Dpad Left, and
B buttons simultaneously for 6 seconds while the controller is
powered on. Rotate both joysticks in full circles 2 to 3 times. The
controller will vibrate once to indicate successful
calibration.
FAQ:
Q: How do I pair the controller with a PC using Bluetooth?
A: Switch the controller to PC mode, then press and hold the
pairing button to enter pairing mode. On your computer, search for
new devices in Bluetooth settings and select GuliKit XW Controller
to pair.
Q: How do I pair wirelessly with Android devices?
A: Set the controller to PC mode, then press and hold the
pairing button until the indicator light blinks rapidly. On your
phone, go to Bluetooth settings, search for new devices, and select
GuliKit XW Controller.
Q: How do I pair with a Switch/Switch 2?
A: Set the controller to NS mode, turn it on, then press and
hold the pairing button. When the Switch is on sleep state, press
the HOME button on Joy-Con to wake it up for pairing.
“`
EN
Model: ES
ES Controller User Manual
USB-C Port: For charging & wired connection.
Indicator Light: Orange – Charging Green – Fully charged Flashing light – Pairing mode Solid White – No custom settings configured Solid Blue – Custom settings configured
Home Button: Press to power on Press and hold to power off
Setting Button
Pairing Button:
Press and hold to enter pairing mode
Slide switch to change controller mode
Power-Off Button:
The controller will automatically power off after 15 minutes of inactivity. When connected via USB or Auto-Continuous Fire (Turbo) is active, the controller will not power off.
CAUTION!
This product contains small parts (such as buttons, joystick caps, and screws) that may pose a choking hazard if swallowed by children.
Joysticks Calibration
While the controller is powered on, press and hold the “L,” “R,” “Dpad Left,” and “B” buttons simultaneously for 6 seconds to enter calibration mode. During calibration, rotate both the left and right joysticks in full circles 2 to 3 times.
Once calibration is complete, the controller will vibrate once to indicate success and will automatically exit calibration mode.
Pairing Methods with PC
1. Bluetooth Pairing – 730Hz Polling Rate: (Requires the computer to have Bluetooth functionality)
a. Switch the controller to PC mode. Then press and hold the pairing button for 2 seconds until the indicator light begins flashing rapidly, indicating that pairing mode has started.
b. On your computer, open the Bluetooth settings, search for new devices, and select “GuliKit XW Controller” to pair.
c. Once the interface displays “Connected”, the pairing is complete.
2. Wired Connection – 1000Hz Polling Rate: Set the controller to PC mode. Connect one end of the USB-C to USB-A data cable to the controller, and insert the other end into a USB-A port on your computer. If you’re using a desktop computer, it is recommended to use one of the USB ports on the back of the computer case for a more stable connection.
Wireless Pairing with Android Devices
1. Set the controller to PC mode. 2. Press and hold the pairing button for 2 seconds until the
indicator light starts blinking quickly, indicating that pairing mode has been activated. 3. On your phone, go to Bluetooth settings, search for new devices, and select “GuliKit XW Controller”. 4. The interface displays “Connected” to the new controller, indicating that the pairing is complete.
Pairing Methods with Switch / Switch 2
1. Set the controller to NS mode, turn it on, then press and hold the pairing button for 2 seconds. The indicator light will blinking quickly, indicating that pairing has started.
2. When the Switch / Switch 2 is on the black screen (sleep) state, press the HOME button on the Joy-Con to wake it up. It will then enter the controller pairing interface, as shown below.
3. Once the interface shows that a new controller is connected, the pairing is complete.
All customized settings mentioned below require holding the Setting button while pressing the corresponding buttons. When customized settings are configured, the indicator light will turn blue. When no customized settings are configured, the
indicator light will remain white. When the battery is low, the indicator light will flash, and the vibration function will automatically turn off. Once the battery level is restored, vibration will turn back on automatically.
Clear All Settings (Reset)
Long vibration: Indicates that the reset process is complete and the controller has been restored to its default settings.
+
Joystick Dead Zone Setting
One vibration: Dead zone enabled on joysticks. Long vibration: Dead zone disabled on joysticks (Default).
+
Continuous Fire (Turbo) Setting
One vibration: Manual Turbo Mode – Continuous fire is activated while holding the button and stops when released.
Two vibrations: Auto Turbo Mode – Press the button once to start continuous fire, and press it again to stop.
Long vibration: Disables both manual and auto turbo modes. (Default)
+
Adjust Vibration Intensity
One vibration: Weak vibration. Two vibrations: Standard vibration.(Default)
Three vibrations: Strong vibration. Long vibration: Turn off vibration.
For more questions & answers, you can visit the website and navigate to the “Support” section and look for the “Frequently Asked Questions” (FAQ) related to the controller.
Documents / Resources
 |
GuliKit ES Controller [pdf] User Manual ES Controller, ES, Controller |