H2 Intelligent Thermal Camera User Guide

Charge the battery following the provided instructions to avoid heating or damage.
Avoid opening or disassembling the battery. In case of leakage, flush eyes with water and seek medical help.

Keep the device stable during use and avoid violent shaking.
Avoid extreme temperatures and direct exposure to high-intensity thermal radiation sources.

Do not block device holes, strike, throw, or shake the device and accessories.
Avoid disassembling the device body as it can void the warranty.

Considerations:

Avoid exposure to dust, moisture, and water splashes. Use a lens cover when not in use.

Store the device and accessories in a special packing box when not in use.
Do not repurpose the accompanying SD card for other uses.

To prevent lens damage, switch display mode to LCD screen after prolonged use.

Storage and Transportation:

Storage:

Store the product in a dry place within the specified temperature range and protect it from moisture and dust.

Transportation:

During transportation, protect the product from rain, water, violent vibration, and impact. Handle with care and avoid tossing.

Frequently Asked Questions

Q: How do I charge the battery correctly?
- A: Follow the charging instructions provided in the guide to prevent overheating or damage.

Q: Can I disassemble the device for maintenance?
- A: It is not recommended to disassemble the device as it may damage it and void the warranty.

Q: What should I do if the battery leaks?
- A: If the battery leaks, flush your eyes with water immediately and seek medical attention.

IMPORTANT

This User Guide is a general guide for a series of products, which means that the specific model product you receive may be different from the pictures in the Guide. The actual product received shall prevail.This User Guide is provided for the convenience of users to use and understand our products. We have made our best efforts to ensure that the content in the Guide is accurate, but we still cannot guarantee it is complete and perfect considering the continued update of our products. We reserve the right to revise the Guide from time to time without notice.

FCC Statement

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The rating information is located at the bottom of the unit.

CONSIDERATIONS

DANGER

Charge the battery as instructed in the Guide and follow the charge steps and precautions. Incorrect charging can cause heating or damage of the battery or even cause personal injury;
Never attempt to open or disassemble the battery; if the battery leaks and the liquid enters the eyes, immediately flush them eyes with water and then take necessary medical care.

WARNING

When using the device, keep it as stable as possible and avoid violent shaking;

Do not use or store the device in an environment with a temperature exceeding the permissible operating or storage temperature range;
Do not directly expose the device to high-intensity thermal radiation sources, such as the sun, lasers, and spot welders;
Do not block the holes on the device;

Do not strike, throw or shake the device and accessories;
Do not disassemble the device body; any attempt to disassemble it can damage it and void your warranty;
Do not spill soluble liquids or similar liquids on the device and cables to avoid damage to the device;

Do not use the device in an environment with a temperature exceeding the operating temperature of the device to avoid damage to the device;
Follow these steps when wiping the device:
- Non-optical surfaces: Use a clean, soft cloth to wipe the non-optical surfaces of the riflescope if necessary;
- Optical surfaces: Avoid dirtying the optical surfaces of the lens when using the riflescope, especially touching the lens with your hands, because the sweat on your hands will leave marks on the lens glass and may corrode the optical coating on the glass surface; when the surface of the optical lens is contaminated, carefully wipe it with special lens tissue;
Do not place the battery in a hot environment or near a hot object;
Do not short-circuit the positive and negative poles of the battery;

Do not place the battery in a humid environment or water.

CAUTION

Do not expose the device to dust or moisture; when using the device in an environment with water, prevent the water from splashing on the device; put on the lens cover when the device is not in use;

When the device is not in use, put it and all accessories in a special packing box;
Do not use the accompanying SD card for other purposes;
Using the lens for a long time may cause a reduced contrast of the lens and a whitened screen. You can switch the display mode to LCD screen display and then switch it back after a period of time.

Storage and Transportation

Storage:

A packaged product shall be stored in a well-ventilated and clean environment with a temperature range of -40° C to 70° C, relative humidity not exceeding 95%, and free of condensate and corrosive gas.

Transportation：

During transportation and circulation, the product shall be protected from rain and water and placed flatwise. It shall be protected from violent vibration and impact. During handling, it shall be handled with care and cannot be tossed.

About the Product

Specially designed for professional users in the infrared thermometry industry, this product is equipped with infrared detectors with high sensitivity and higher resolution for clearer infrared images and a higher temperature measurement accuracy. Supplemented by the Android operating system, a large-screen display and a rotatable lens structure, it is easy to use and powerful. It can also collect visible and infrared images simultaneously and display key observation points by PIP or MIF. In addition, based onopen APPs for Android, this product can be extended to a multipurpose mobile thermal imaging application platform.

Introduction to Product Parts

Power
Back
Five-way

Library
Auxiliary
Laser

Light
Visible Light Camera
Laser

Infrared camera
Change lens
Focus

Photo
Battery
Focus ring

SIM card slot
Type-C interface
SD card slot

Silica cover

Quick Operation Instructions

Operation steps

Place the battery in the battery compartment.

Press and hold the power button for 2 – 3 s to power on the thermographic camera.
Set the language (for first use).
Go to the real-time IR image state and aim the camera at the target.

Focus on making the target image sharp.
Select a shot or video mode, and press the shooting/recording button to save the image or record the video.
Perform other operations via the touch screen or buttons.

Interface description

Status bar: battery capacity, WiFi, 4G network (support some models), location.

Compass information: enter Settings – turn on/off in Image Tags, or long-press [] in the real-time interface to enter Image Tags to turn on/off.
Time and date: enter Settings – General – Date & Time, or long-press in the real-time interface to enter the Date & Time interface.
Image mode: infrared, visible light, MIF, PIP.

Temperature measurement parameters: set the reflected temperature, atmospheric temperature, relative humidity, target distance, atmospheric transmissivity, etc.
Palette: set and add custom colors.
Analysis target: set the analysis target, such as the point, line, circle, rectangle, outline and temperature difference.

Isotherm: upper isotherm, lower isotherm, and isotherm within the range.
Settings: conduct system settings.
LEVEL SPAN mode: switch between automatic, semi-automatic, and manual modes through the buttons or touch screen.

Switch the basic colors and custom colors in real time.
Emissivity: set the emissivity based on the target.
Shortcut menu: slide down the touch screen in the main preview interface to enter the Shortcut menu.

Considerations

Avoid direct sunlight on the object to be observed.
Do not directly expose the device to high-intensity thermal radiation sources, such as the sun, lasers, and spot welders.
During the observation, make sure the target is clear; otherwise, you may get the wrong measurement results.

Proper analysis of IR images requires technical knowledge of the application.

Guide for Common Faults and Troubleshooting

Special statement: The manual will be updated with technical improvements of the product

Documents / Resources

Guide H2 Intelligent Thermal Camera [pdf] User Guide
H2 Intelligent Thermal Camera, H2, Intelligent Thermal Camera, Thermal Camera, Camera

References

User Manual

H2 Intelligent Thermal Camera

Product Usage Instructions