SP-V6 Wireless Headphone
“
Product Specifications
- FCC ID: 2A7J2-USHPV6
- Model: SP-V6
- Wireless Headphone with Bluetooth connectivity
- Charging: Red light indicator when charging, turns off when
fully charged
Product Usage Instructions
1. Bluetooth Pairing:
- Press and hold the button for 6 seconds to enter pairing
mode. - Activate Bluetooth on your device and select ‘SP-V6’ from the
available devices list. - Successful pairing is indicated by a slow flashing blue
light.
2. Power On and Power Off:
- To power on, press and hold the button for 3 seconds.
- To power off, press and hold the button for 3 seconds.
3. Bluetooth Music Play:
- Select a song on your music player, press the button to
play/pause music. - To adjust volume, short press the button for increase, hold for
2 seconds to change the track.
4. Bluetooth Phone Call:
- Press the button to answer/end a call.
- To reject a call, press the button when the call is
incoming.
5. Activate Voice Assistant:
Double press the button to activate voice assistant (Siri/Google
Now).
FAQ
Q: How do I know if the headphone is fully charged?
A: The indicator light will turn off when the headphone is fully
charged.
“`
Description:
FCC ID : 2A7J2-USHPV6
Content:
Wireless Headphone Charging Cable Quick Guide
Volume Up / Next Track
Power ON / OFF Track / Calls Control / Voice Assistant
Volume Down / Previous Track
Charging Port
x
x
x
Product Specification
Bluetooth version V5.3 Transmit distance10 meter Battery3.7V / 300 mAh InputDC 5V / 500 mA Charging Time2 hours Playback Time30 hours Driver Unit40mm Sensitivity110±3 dB Impedance32 ohm±15% Frequency2402-2480MHz
Product Operation
1. Bluetooth Pairing:
1 For first pairing, press and hold button for 6 seconds
the headphone will indicate Bule light for 2 seconds and enter into pairing mode, than the light will flash in Red and Blue quickly.
2 Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the
headphone `SP-V6′ from the list of available Bluetooth devices.
3 When the pairing is successful, Blue light will flash slowly every 5 seconds and your device will show the connected Bluetooth icon.
Note: The pairing function can be different from device to device (check the manual of your device) .
Quick Guide
2. Power on and Power off:
Power on Press and hold button Power off Press and hold button
for 3 seconds. for 3 seconds.
3. Bluetooth music play:
1 Open the music player, select a song to play, press the button to play music and then press again to pause music.
2 Play music and short press button to increase the volume, press and hold for 2 seconds to change the next song.
3 Play music and short press button to decrease the volume, press and hold for 2 seconds to change the previous song.
4. Bluetooth phone call:
1 Press the button to answer an incoming call, press the button again to end the call.
2 When the call is coming, press the button reject the call.
for 2 seconds to
5. Active Voice Assistant
Double press to active voice assistant (Siri/Google Now…).
Wireless Headphone
Model: SP-V6
Charging
When the Bluetooth headphone is connected with charger (or computer USB port) by charging cable, the headphone will indicate Red light. When the headphone is fully charged, the indicator will be off.
Documents / Resources
 |
GUESS SP-V6 Wireless Headphone [pdf] User Guide USHPV6, 2A7J2-USHPV6, 2A7J2USHPV6, SP-V6 Wireless Headphone, SP-V6, Wireless Headphone, Headphone |