Guangdong F100 Scent Diffuser User Manual

Guangdong F100 Scent Diffuser

Introduction

Please read this user manual carefully before using the product and keep it in a safe place for future reference.

Safety Precautions

1. Do not use overloaded power outlets, damaged power cords, plugs, or sockets. Doing so may result in electric shock or fire.
   If any damage is found, stop using the product immediately and contact your dealer or after- sales service for a replacement.
2. Do not disassemble or open the device, as this may damage the product and void the warranty. If the device malfunctions, please refer to this user manual or contact your dealer or after-sales service for assistance.
3. Do not disassemble, drop, or shake the device while it is operating, as this may cause malfunction or damage.
4. Do not immerse the device or power adapter in water or any other liquid. Never operate the device with wet hands or use a wet power adapter.
5. If the device contains essential oil, do not turn it upside down, tilt it excessively, or lay it on its side, as this may cause oil leakage and damage the device.
6. During thunderstorms, do not operate the device or touch the power cord to reduce the risk of electric shock.

Product Instruction

The F100 adopts the industry’s second-generation patented silent cold atomization technology, operating quietly at low noise while generating fine and uniform mist particles. Equipped with a magnetic mounting design and a 120 ml large capacity tank, it cuts down essential oil refilling frequency. The industry-exclusive 360° patented oil anti- leakage technology prevents oil leakage even when the unit is overturned. Boasting a compact and elegant appearance, the device is portable and user- friendly, perfectly suitable for fragrance scenarios including residential bedrooms, hotels, spas, cinemas and other venues.

Specifications

Oil Consumption: Tested at the maximum output using Shangri- La fragrance oil (viscosity: 9.5 mPa s) under an ambient temperature of 30° C and relative humidity of 45%. The results are for reference only.

Installation and Operating Instructions

1. Connect power to activate mist output.
2. Pull up the atomizing head together with the fragrance oil bottle.
   
3. Rotate counterclockwise to take out the essential oil bottle; fill the bottle with fragrance oil, screw it clockwise to fasten, then put the assembly back into the unit.
   

Device Maintenance

To ensure optimal performance, clean the device every 6 months, or whenever the fragrance becomes noticeably weaker.

1. Lift the atomizing head upward and remove the used essential oil bottle.
2. Clean the oil tube filter each time you replace the essential oil.
3. Fill the essential oil bottle with a small amount of alcohol and clean it thoroughly.

Troubleshooting

App User Manual (BLUETOOTH)

1. Download and Connect the Device Scan the QR code on the cover or search for “Aroma Asst” in the App Store to download and install the App.
2. Open the App homepage and tap [BLUETOOTH] (as shown in Figure 1).
3. Search for the device. When the device appears, tap to connect and enter the default password 9999 (as shown in Figure 2).
   
   If you forget the password, please make sure the device is turned off. Then, press and hold the power button. After the device powers on, continue holding the button for an additional 4 seconds until the screen shows the recovery to the default password state (as shown in Figure 3).
   
4. Working Settings
   

F100 Indicator Light Instruction

F100 Ambient Light Instructions

Packing Accessories

Power Supply	User Manual

After-Sales Service

The device is covered by a one-year limited warranty from the date of purchase.
The following are not covered by the warranty:
Consumable parts, including the housing, power cord, and external tubing.
Damage caused by improper use, misuse, accidents, or unauthorized repairs.
Maintenance services provided after the warranty period has expired.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

If you are unable to scan the QR code, search for “Aroma Asst” in the App Store or Google Play.