RDINSCOS MT69 2-in-1 Pen & Pinless Moisture Meter User Manual

1. પરિચય

This manual provides detailed instructions for the operation and maintenance of your RDINSCOS MT69 2-in-1 Pen & Pinless Moisture Meter. This device is designed for accurate measurement of moisture content in various materials, including wood and building materials, utilizing both non-destructive spherical sensing and precise pin-type measurement.

Please read this manual thoroughly before using the device to ensure safe and correct operation.

2. સલામતી માહિતી

• ઉપકરણને હંમેશા કાળજી સાથે હેન્ડલ કરો.
• When using the pin probe, exercise caution as the pins are sharp and can cause injury. Keep out of reach of children.
• Do not attempt to measure live electrical circuits with the pin probe.
• ઉપકરણને અતિશય તાપમાન, ઉચ્ચ ભેજ અથવા સીધા સૂર્યપ્રકાશના સંપર્કમાં આવવાનું ટાળો.
• ઉપકરણને પાણી અથવા અન્ય પ્રવાહીમાં બોળશો નહીં.
• ઉપકરણ ખોલશો નહીં casing or attempt repairs. Refer all servicing to qualified personnel.
• Ensure the device is fully charged before use to avoid inaccurate readings.

3. ઉત્પાદન ઓવરview

The RDINSCOS MT69 is a versatile moisture meter featuring two primary measurement methods: a non-destructive spherical sensor and a precise pin-type probe. It includes a large LCD display for clear readings and an intelligent alarm system.

આકૃતિ 3.1: RDINSCOS MT69 2-in-1 Moisture Meter with its spherical sensor and detachable pin probe.

3.1. ઘટકો

• મુખ્ય એકમ: Handheld device with LCD display and control buttons.
• ગોળાકાર સેન્સર: Integrated non-destructive sensor for surface measurements.
• Pin Probe: Detachable probe with two sharp pins for precise penetration measurements.
• યુએસબી ચાર્જિંગ કેબલ: આંતરિક બેટરી રિચાર્જ કરવા માટે.
• Replacement Pins: One pair of spare pins for the pin probe.
• Mini Key: For replacing the pin probe pins.

૩. ડિસ્પ્લે અને નિયંત્રણો

The device features a 2.9-inch LCD with a switchable backlight for clear readability. Key indicators include:

• Moisture reading (percentage or relative value).
• Material type indicator (WOOD/BLD).
• બેટરી સ્તર સૂચક.
• Alarm status (visual LED, acoustic).
• HOLD function indicator.
• Auto Power Off (APO) indicator.

Control buttons include Power, Mode/SET, Hold, Mute, and Backlight.

4. સેટઅપ

4.1. બેટરી ચાર્જ કરી રહી છે

The device is equipped with a rechargeable 1200 mAh Lithium Polymer battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB charging cable.

1. Connect the USB charging cable to the device's charging port.
2. USB કેબલના બીજા છેડાને પ્રમાણભૂત USB પાવર એડેપ્ટર (શામેલ નથી) અથવા કમ્પ્યુટરના USB પોર્ટ સાથે કનેક્ટ કરો.
3. LCD પર બેટરી સૂચક ચાર્જિંગ સ્થિતિ બતાવશે.
4. એકવાર સંપૂર્ણ ચાર્જ થઈ ગયા પછી, કેબલને ડિસ્કનેક્ટ કરો.

4.2. Attaching the Pin Probe (Optional)

If you intend to use the pin measurement mode, attach the pin probe to the main unit.

1. Remove the protective cap from the pin probe.
2. Carefully align the connector of the pin probe with the corresponding port on the main unit.
3. જ્યાં સુધી તે સ્થાને ક્લિક ન થાય ત્યાં સુધી તેને મજબૂત રીતે દબાણ કરો.

5. ઓપરેટિંગ સૂચનાઓ

5.1. પાવર ચાલુ/બંધ

• પાવર ચાલુ કરવા માટે: દબાવો અને પકડી રાખો શક્તિ બટન () for approximately 2 seconds.
• પાવર બંધ કરવા માટે: દબાવો અને પકડી રાખો શક્તિ button again for approximately 2 seconds. The device also features an Auto Power Off (APO) function after 10 minutes of inactivity.

5.2. Mode Selection (Pinless vs. Pin)

The MT69 offers two measurement modes. Use the Mode/SET તેમની વચ્ચે સ્વિચ કરવા માટે બટન.

આકૃતિ 5.1: The 2-in-1 functionality of the RDINSCOS MT69, illustrating both spherical and pin measurement methods.

5.3. Pinless Measurement (Spherical Sensor)

This mode is ideal for quick, non-destructive scanning of surfaces to identify potential moisture areas. It provides relative values.

1. Ensure the device is in pinless mode (indicated on the LCD).
2. Place the spherical sensor flat against the surface of the material you wish to test.
3. Move the device slowly across the surface. The display will show relative moisture values from 0 to 100.
4. The measurement depth for this mode is approximately 20-40 mm.
5. The device will automatically calibrate when placed on a dry surface.

આકૃતિ 5.2: Demonstrating non-destructive scanning with the spherical sensor on a wall surface.

૩.૩. પિન માપન

Use this mode for accurate percentage moisture readings by penetrating the material with the pins.

1. Ensure the pin probe is attached and the device is in pin mode (indicated on the LCD, showing % values).
2. Carefully push the pins into the material to be tested. Ensure both pins fully penetrate the surface.
3. The display will show the moisture content as a percentage.
4. Measurement ranges: Wood (5-52%), Building Materials (BLD) (2-30%).

આકૃતિ 5.3: Illustration of measurement depth for the spherical sensor and pin probe application on wood and brick materials.

5.5. એલાર્મ સિસ્ટમ

The MT69 features an intelligent alarm system to alert you to high moisture levels.

• વિઝ્યુઅલ એલાર્મ: A three-color LED indicator (green, blue, red) provides a quick visual assessment of moisture levels.
• એકોસ્ટિક એલાર્મ: An audible beep will sound when moisture levels exceed a set threshold.
• Adjustable Limits: In spherical sensor mode, alarm limits can be adjusted via the Mode/SET button. This feature is not available in pin mode.
• મ્યૂટ ફંક્શન: દબાવો મ્યૂટ કરો button to silence the acoustic alarm for noise-sensitive environments.

આકૃતિ 5.4: The device's visual and acoustic alarm system in action, indicating moisture detection.

5.6. હોલ્ડ ફંક્શન

દબાવો પકડી રાખો ડિસ્પ્લે પર વર્તમાન રીડિંગ ફ્રીઝ કરવા માટે બટન. હોલ્ડ છોડવા અને લાઇવ માપન ફરી શરૂ કરવા માટે તેને ફરીથી દબાવો.

૬.૩. સ્વ-પરીક્ષણ કાર્ય

The device includes a self-test function for quality assurance. Refer to the on-screen prompts or specific instructions in the quick start guide for activation.

5.8. Important Measurement Considerations

When using the spherical sensor, ensure there is no metal within approximately 5 cm of the area being tested, as metal can interfere with readings.

આકૃતિ 5.5: Guidance on avoiding metal objects during spherical sensor measurements for accurate results.

6. જાળવણી

6.1. સફાઈ

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.

6.2. બેટરી કેર

To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the low battery indicator appears. If storing for an extended period, charge the battery to approximately 50% and recharge every few months.

6.3. Replacing Pin Probe Pins

The pin probe pins are replaceable. If the pins become dull or damaged, use the provided mini key to unscrew and remove the old pins, then carefully screw in the new replacement pins.

6.4. સંગ્રહ

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the protective cap on the pin probe when not in use.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official RDINSCOS website. Please have your model number (MT69) and purchase date available when contacting support.