Philips 44W 4200 lm Motion Sensor LED Security Light Outdoor Instruction Manual

1. ઉત્પાદન ઓવરview

The Philips 44W 4200 lm Motion Sensor LED Security Light is designed for outdoor use, providing bright and efficient illumination. This 2-pack floodlight features a Passive Infrared (PIR) motion sensor, 5000K daylight color temperature, and is built to withstand various weather conditions. Its adjustable heads and multiple operating modes offer versatile lighting solutions for your property.

Image: Philips 44W 4200 lm Motion Sensor LED Security Light (2-pack) in black.

2. સલામતી માહિતી

• ઇન્સ્ટોલેશન અથવા સર્વિસિંગ પહેલાં હંમેશા સર્કિટ બ્રેકર પર પાવર બંધ કરો.
• જો તમે ઇન્સ્ટોલેશન પ્રક્રિયા વિશે અચોક્કસ હો તો યોગ્ય ઇલેક્ટ્રિશિયનની સલાહ લો.
• ખાતરી કરો કે બધા વાયરિંગ કનેક્શન સુરક્ષિત છે અને સ્થાનિક ઇલેક્ટ્રિકલ કોડ્સનું પાલન કરે છે.
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.
• બાળકોને ઇન્સ્ટોલેશન એરિયાથી દૂર રાખો.

3. બોક્સમાં શું છે

Each Philips 44W 4200 lm Motion Sensor LED Security Light package includes the following components:

• LED Security Light Fixture (2 units for this pack)
• એલઇડી લેન્સ
• Mounting Hardware (screws, wire nuts, mounting plate, rubber plug, gasket)
• સૂચના માર્ગદર્શિકા

Image: Included accessories for installation.

4. લક્ષણો

• High Brightness & Wide Beam Angle: Emits 4200 lumens with a 5000K cool daylight color temperature. Two adjustable heads provide customizable coverage.
• High-Sensitivity PIR Sensor: Detects motion within a 0-69ft range and 180° induction angle. Lighting time is adjustable from 1-10 minutes.
• 4 લાઇટિંગ મોડ્સ: Includes Test Mode, Security Mode, Dusk to Dawn Mode, and Manual Override Mode (always-on at 80% brightness for up to 6 hours).
• ટકાઉ અને હવામાન પ્રતિરોધક: Constructed with aluminum lamp material, tested for corrosion and rust resistance, and rated IP65 for various weather conditions.
• ઊર્જા બચત એલઇડી: Integrated LED design eliminates bulb replacement and reduces electricity costs by up to 80% compared to 220W incandescent fixtures.
• Adjustable Head Design: Customize each light head's angle to suit specific lighting needs.

Image: Key features of the Philips security light.

Image: Adjustable head design for flexible lighting coverage.

Image: Aluminum construction for durability and heat dissipation.

5. સ્થાપન

The Philips security light is designed for easy installation. It requires hardwiring; a junction box is not included. Follow these general steps for installation:

1. વાયરિંગ તૈયાર કરો: Ensure power is off at the circuit breaker. Connect the ground wire (green) from the light fixture to the ground wire in the junction box.
2. વાયર કનેક્ટ કરો: Connect the white wire (neutral) from the light fixture to the white wire from the junction box using a wire nut. Connect the black wire (live) from the light fixture to the black wire from the junction box using a wire nut.
3. માઉન્ટિંગ પ્લેટ: માઉન્ટિંગ પ્લેટને જંકશન બોક્સ પર સુરક્ષિત કરો.
4. ફિક્સ્ચર જોડો: Align the light fixture with the mounting plate and secure it with the provided screws. Ensure a tight seal between the lamp and the wall to enhance water resistance.
5. સીલ: Apply sealant around the fixture base to prevent water leakage.
6. હેડ એડજસ્ટ કરો: Adjust the light heads and motion sensor to your desired angles.

Recommended installation height: 8.2 ft.

Image: Easy installation steps for the security light.

Image: Two common mounting methods: eave and wall mounting.

ઇન્સ્ટોલેશન વિડિઓ

6. ઓપરેટિંગ મોડ્સ

The Philips security light offers four distinct operating modes to suit various needs:

છબી: ઓવરview of the four available lighting modes.

1. પરીક્ષણ મોડ: Can be activated in both daytime and nighttime. When motion is detected, the light turns on for 5 seconds. If no motion, it stays off. This mode is useful for verifying sensor functionality and coverage area during installation.


Image: Test Mode operation.

2. સુરક્ષા મોડ: Operates only at nighttime. When motion is detected, the light automatically turns on for a set duration (1, 3, or 10 minutes). If no motion, it stays off.


Image: Security Mode operation.

3. સાંજથી પરોઢ સુધીનો મોડ: Operates only at nighttime. The light automatically turns on at dusk and turns off at dawn. When motion is detected, the light brightens to 100% and then dims to 20% when no one is around.

Image: Dusk to Dawn Mode operation.
4. મેન્યુઅલ ઓવરરાઇડ મોડ: Can be activated in both daytime and nighttime. This mode keeps the light on at 80% brightness for a maximum of 6 hours. To activate, switch the light OFF and ON twice within 3 seconds. To deactivate, switch the light OFF and ON for more than 3 seconds, returning it to sensor mode. The brightness automatically dims from 100% to 80% after 12 minutes in this mode.


Image: Manual Override Mode activation and deactivation.

7. સેટિંગ્સને સમાયોજિત કરવી

The motion sensor allows for adjustment of both sensing distance and activated lighting time:

• સેન્સિંગ અંતર: Adjust the 'DISTANCE' dial on the sensor to set the detection range:
  • L (Low): 0-20 ft
  • M (Medium): 0-39 ft
  • H (High): 0-69 ft
• Activated Lighting Time: Adjust the 'TIME' dial on the sensor to set how long the light stays on after motion is detected:
  • 1 MIN: 1 minute
  • 3 MIN: 3 minutes
  • 10 MIN: 10 minutes

Image: Dials for adjusting sensing distance and lighting time.

Image: Switch tips for adjusting sensor settings.

8. જાળવણી

To ensure optimal performance and longevity of your Philips security light, follow these maintenance guidelines:

• સફાઈ: Periodically clean the light fixture and motion sensor lens with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સનો ઉપયોગ કરવાનું ટાળો જે ફિનિશ અથવા ઇલેક્ટ્રોનિક ઘટકોને નુકસાન પહોંચાડી શકે છે.
• નિરીક્ષણ: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. Ensure the sealant around the base remains intact to maintain its waterproof rating.
• બલ્બ બદલવાની કોઈ જરૂર નથી: This unit features integrated LED lighting, meaning there are no bulbs to replace.

9. મુશ્કેલીનિવારણ

If you encounter issues with your Philips security light, refer to the following common troubleshooting steps:

• લાઇટ ચાલુ થતી નથી:
  • Check the power supply at the circuit breaker.
  • Ensure the motion sensor is not obstructed.
  • Verify the operating mode settings (e.g., if in Security Mode, ensure it's dark enough).
  • Adjust the 'DISTANCE' and 'TIME' settings on the sensor.
• પ્રકાશ સતત ચાલુ રહે છે:
  • Check if the light is in Manual Override Mode. Refer to Section 6 for deactivation instructions.
  • Ensure the 'TIME' setting is not set too high.
  • Verify that there is no continuous motion within the sensor's detection range.
• મોશન સેન્સર શોધી રહ્યું નથી:
  • Ensure the sensor lens is clean and free from obstructions.
  • Adjust the 'DISTANCE' setting to a higher sensitivity.
  • Verify the sensor's angle and position to cover the desired area.
  • Test the sensor in 'Test Mode' to confirm functionality.

ઉત્પાદન વિડિઓ

10. સ્પષ્ટીકરણો

11. વોરંટી અને સપોર્ટ

Philips products are manufactured to the highest quality standards. For warranty information, technical support, or service inquiries, please refer to the official Philips webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.

વધુ માહિતી માટે, મુલાકાત લો એમેઝોન પર ફિલિપ્સ સ્ટોર.